Help install LineageOS 16 in galaxy tab 9.7 T550 - General Questions and Answers

Good Morning,
I am not able to put the LineageOS 16 rom on Samsung Galaxy tab A T550.
I have tried both ways:
with TRWP and with rom.zip and it won't let me.
I have also tried ODIN and the 4 files + pit, and it does not let me either, it gives me an error in both.
I have not been able to unlock the bootloader, because the fastboot commands do not work (I have read that fastboot does not work on samsung), and I have no OEM menu unlock option.
I think I can't install the lineageOS rom because this qualcom secure boot: enable
and I don't know how to unlock it to install.
I have tried everything.
somebody could help me.
I DO NO PUT PHOTO..., BUT DEVICE IS
ODIN MODE
PRODUCT NAME: SM-T550
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREP: S1, T1, H1, R1, A1, P1
SECURE DOWNLOAD:ENABLE
Thank you

Related

Custom frp lock on samsung s6 sm -g920t

ODIN MODE:
PRODUCT NAME: SM - G920T
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x020c)
RP SMREV: B:5 K:3 S:4
saw custom lock on my phone, tried to use odin to flash it but I'm having this on my download screen.
Also i don't have the box to determine the Serial number.
Please help me out.

Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.

Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Teejeevee said:
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Click to expand...
Click to collapse
Ive been trying to deal with this issue as well, you are lucky, I have the sm g930P and sprint just updated the Fused to B7 and I didnt know that. Mine is stuck in a recovery Loop and I dont have a recovery installed, it is the qualcomm model so i havent had any lucky flashing induvidual files. My bootloader is locked and every time I try to flash the BL file it Gives me A secure Rev Check Fail.
For You though all you need to do is find the Right Firmware for your Friends Phone. You may also be using the wrong version of Odin. Thanks in advance to anyone who can help.
RED
Teejeevee said:
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Click to expand...
Click to collapse
Device means it's security level, so when its 2 you can't install a binary 1 package. Download the firmware with (AP_G930FXXU 3 = binary 3. Odin does not accept the device to flash a older firmware for security reasons. So I will leave a link for a firmware with binary 3 so it wont be any problems. Hope it helps (Sorry for bad English but im just a 14 years old kid from Sweden.) Btw just tell me if you need a specific CSC and I can change the link
Download

Killing Samsung

My Samsung sm-G930V is stuck on recovery booting, i don't know the firmware for it i only know the download mode info..
Product Name: SM-G930V
Current Binary: Samsung Official
System Status: Official
Frp lock: On
Qualcomm SecureBoot: Enable
RP SWREV: B11(2,1,1,1,1) K11 S11
Secure Download: Enable
This is all i know for now...
Please i need help...

Boot Loop!

Device: Samsung J4+ (SM-J415-FN)
Tried rooting my phone through the instructions posted here:
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J4+/J415F/FN/G/DS
Unofficial release -TWRP recovery for the Galaxy J4 plus 2018 - SM-J415 MSM8917 TWRP 3.3.1-0 Released May 22, 2019 TWRP 3.3.1-0 is out now for most currently supported devices. What's new in 3.3.1-0: * Fix selinux issues during formatting -...
forum.xda-developers.com
I exited after finishing TWRP flash, because the file for V3 RMM bypass wouldn't flash, no matter what I did to it
Now, its stuck in a boot loop.
TWRP says that internal memory is at 0GB, and ODIN is giving me a hard time by rejecting my flash when I try to revert to stock
ODIN MODE (HIGH SPEED) PRODUCT NAME: SM-J145FN
CURRENT BINARY: Custom
FAP LOCK: OFF
OEM LOCK: OFF
KG STATUS: CHECKING
WARRANTY VOID: 0x1 (0x500)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A6, P1
RP SWREB: K, 6, S 6
DID: 0056F661d4e2
SECURE DOWNLOAD: ENABLE
download mode!!!
SW REV CHECK FAIL : (aboot)Fused6 > Binary 3
I'm a noob when it comes to these things, somebody help me!
Fixed by @hainguyenthao!!
Thanks man!!!!

[Q] Serious issues on Samsung A125F!

My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Did you get a solution?
There are a couple of tools that can help you complete the kg status then write unofficial files.
hd_scania said:
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Click to expand...
Click to collapse
Need to unlock bootloader first. In Download mode, does it have said option to unlock bootloader?

Categories

Resources