Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Teejeevee said:
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Click to expand...
Click to collapse
Ive been trying to deal with this issue as well, you are lucky, I have the sm g930P and sprint just updated the Fused to B7 and I didnt know that. Mine is stuck in a recovery Loop and I dont have a recovery installed, it is the qualcomm model so i havent had any lucky flashing induvidual files. My bootloader is locked and every time I try to flash the BL file it Gives me A secure Rev Check Fail.
For You though all you need to do is find the Right Firmware for your Friends Phone. You may also be using the wrong version of Odin. Thanks in advance to anyone who can help.
RED
Teejeevee said:
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Click to expand...
Click to collapse
Device means it's security level, so when its 2 you can't install a binary 1 package. Download the firmware with (AP_G930FXXU 3 = binary 3. Odin does not accept the device to flash a older firmware for security reasons. So I will leave a link for a firmware with binary 3 so it wont be any problems. Hope it helps (Sorry for bad English but im just a 14 years old kid from Sweden.) Btw just tell me if you need a specific CSC and I can change the link
Download
Related
ODIN MODE:
PRODUCT NAME: SM - G920T
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x020c)
RP SMREV: B:5 K:3 S:4
saw custom lock on my phone, tried to use odin to flash it but I'm having this on my download screen.
Also i don't have the box to determine the Serial number.
Please help me out.
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-J710F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B: -1 K:0 S:1
SW REV. CHECK FAIL. DEVICE: -1, Binary: 2
I also tried flash many firmware
J710FN_XXU1API1_DBT1APH1
J710FN_XXU1API6_XXU1API6_OXY1API6
J710FXXU4BRA2_J710FOJV4BRA1_J710FXXU4BRA5_HOME.tar .md5
J710FXXU4BQL3_CL12710698_QB16134837_REV03_user_low _ship.tar.md5
J710FXXU1API4_J710FOJW1API2_J710FXXU1APH4_HOME.tar .md5
And tried flash only system, boot, modem, recovery but not difference phone won't turn on stuck on logo.
Next i tried flash many sboot files but fail again.
J710FXXU1API4_SBOOT
J710FXXU2AQB3_Stock_sboot
J710FXXU4BRA2_Stock_sboot
J710FXXU1APE1_Stock_sboot
J710FNXXU1APD2_ENG_sboot
What is Device -1 error is there someone can tell me any solution?
now what i do? i need help please dear friends.
Did you solved this problem?
rfeeykhan said:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-J710F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download : Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B: -1 K:0 S:1
SW REV. CHECK FAIL. DEVICE: -1, Binary: 2
I also tried flash many firmware
J710FN_XXU1API1_DBT1APH1
J710FN_XXU1API6_XXU1API6_OXY1API6
J710FXXU4BRA2_J710FOJV4BRA1_J710FXXU4BRA5_HOME.tar .md5
J710FXXU4BQL3_CL12710698_QB16134837_REV03_user_low _ship.tar.md5
J710FXXU1API4_J710FOJW1API2_J710FXXU1APH4_HOME.tar .md5
And tried flash only system, boot, modem, recovery but not difference phone won't turn on stuck on logo.
Next i tried flash many sboot files but fail again.
J710FXXU1API4_SBOOT
J710FXXU2AQB3_Stock_sboot
J710FXXU4BRA2_Stock_sboot
J710FXXU1APE1_Stock_sboot
J710FNXXU1APD2_ENG_sboot
What is Device -1 error is there someone can tell me any solution?
now what i do? i need help please dear friends.
Click to expand...
Click to collapse
I think you are not flashing a firmware that has the right binary, the binary is represented by the U1, U2, U3, U4, etc.. in the firmware file name. You need to find the newest, most up to date firmware with the highest Binary that you possibly can find, e.g. U4, U5, U6.
Sent from my SM-S767VL using Tapatalk
I tried to flash TWRP. But that doesn't work with the following error message!
Odin Mode (High Speed)
Product Name: SM-G935U
Current Binary: Samsung Official
Systemstatus: Official
FAP Lock: Off
Warranty Void: 0x0
Wualcom Secureboot: Enable
AP SWREV:B11(2.1.1.1.1) K11 S11
Secure Download: Enable
Secury check fail: recovery
There is no official twrp for the model with a snapdragon processor.
Hello guys, i have a big problem..my phone is not bricked but with every rom i flash my phone don't boot up is always lock on samsung logo..can't stay for 24 hrs but don't go on configuration..
i try to flash twrp but nothing..if i go in download mode i have this info:
DOWNLOAD SPEED:FAST
PRODUCT NAME: SM-A750FN
CURRENT BYNARI:SAMSUNG OFFICIAL
KG STATERENORMAL
FRP LOCKFF
OEM LOCKFF
SECURE DOWNLOAD: ENABLE
CARRIER_ID: OMN (I TRY TO CHANGE THIS BUT IS IMPOSSIBLE)
WARRABTY VOID: 1
RP SWREV B:4 K:4 S:4
Please help me to go just on boot configuration phone...
thanks!
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Did you get a solution?
There are a couple of tools that can help you complete the kg status then write unofficial files.
hd_scania said:
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Click to expand...
Click to collapse
Need to unlock bootloader first. In Download mode, does it have said option to unlock bootloader?