I’ve done too much times of factory resets (recovery mode) and Downloads of the full Android 11 based firmware (see SamMobile) onto the device (by Heimdall), but still unfortunately my device is still under boot loops, w/o KNOX disabled or even removed, or vm-verity disabled before. But now i no longer have access to the ROM at all, hence unable to authorize ADB for disabling dm-verity or removing KNOX.
And finally nothing more could also be done using recovery or Download mode, what to do next?
Code:
Heimdall mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: checking
MTK ’’secure’’ boot: Enable (0)
Warranty void: 0x1 (0x500)
RP SWREV: B1 NS1 K1 S1
‘‘Secure’’ Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Code:
Android recovery
samsung/a12nsxx/a12
11/RP1A.200720.012/A125FXXU1BUE3
user/release-keys
Code:
#Reboot Recovery Cause is [UNKNOWN]#
#Reason is []#
Support API: 3
# MANUAL MODE v1.0.0#
No command specified.
Related
Can anyone give me some suggestions? I've tried every possible solution to fix my s7 bootloop but still no luck. I've flashed the latest firmware and it pass on odin but still unable to boot.
I also did wipe cache and factory reset.
What's next? Any advice/suggestions would be appreciated.
On download mode it says
Produt name: sm-g930t
Current binary: Samsung official
System binary: Official
Frp lock: On
Warranty void: 0x0
Qualcomm secureboot: EnabLE
RP SWREV: B9 (2 ,1, 1, 1, 1,) K9 S9
SECURE DOWNLOAD: ENABLE
And on android recovery at the bottom it says.
#fail to open recover_cause(No such file or directory)#
#Reboot Recovery Cause is (Unknown)#
No support SINGLE-SKU
File-Based OTA
Supported API:3
#Manual Mode v1.0.0#
Successfully verified dmverity hash tree
I tried to flash TWRP. But that doesn't work with the following error message!
Odin Mode (High Speed)
Product Name: SM-G935U
Current Binary: Samsung Official
Systemstatus: Official
FAP Lock: Off
Warranty Void: 0x0
Wualcom Secureboot: Enable
AP SWREV:B11(2.1.1.1.1) K11 S11
Secure Download: Enable
Secury check fail: recovery
There is no official twrp for the model with a snapdragon processor.
I've got a SM-J500FN running 6.0.1 Marshmallow
Password is lost so it is in a screen lock mode. It has all the original firmwares. Not that I can't get access to it I can't go to developer mode and can not set OEM unlock.
The phone goes to Download mode and Recovery mode OK.
Tried Odin + CF-Auto Root. The process gives me Auth FAIL!
In download mode I can see
odin mode
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
System Status: Official
FRP lock: on
warranty void: 0x0
qualcomm secure boot: enable (CSB)
ap swrev: S1,T1,H1,A1,A1,P1
SECURE DOWNLOAD: ENABLE
SECURE CHECK FAIL: recovery
custom binary (recovery) Blocked by FRP Lock
Is there any way to set Development mode / OEM lock settings (remember I have NO access to the phone UI) ?
Any other tricks to gain access ?
Device: Samsung J4+ (SM-J415-FN)
Tried rooting my phone through the instructions posted here:
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J4+/J415F/FN/G/DS
Unofficial release -TWRP recovery for the Galaxy J4 plus 2018 - SM-J415 MSM8917 TWRP 3.3.1-0 Released May 22, 2019 TWRP 3.3.1-0 is out now for most currently supported devices. What's new in 3.3.1-0: * Fix selinux issues during formatting -...
forum.xda-developers.com
I exited after finishing TWRP flash, because the file for V3 RMM bypass wouldn't flash, no matter what I did to it
Now, its stuck in a boot loop.
TWRP says that internal memory is at 0GB, and ODIN is giving me a hard time by rejecting my flash when I try to revert to stock
ODIN MODE (HIGH SPEED) PRODUCT NAME: SM-J145FN
CURRENT BINARY: Custom
FAP LOCK: OFF
OEM LOCK: OFF
KG STATUS: CHECKING
WARRANTY VOID: 0x1 (0x500)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A6, P1
RP SWREB: K, 6, S 6
DID: 0056F661d4e2
SECURE DOWNLOAD: ENABLE
download mode!!!
SW REV CHECK FAIL : (aboot)Fused6 > Binary 3
I'm a noob when it comes to these things, somebody help me!
Fixed by @hainguyenthao!!
Thanks man!!!!
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Did you get a solution?
There are a couple of tools that can help you complete the kg status then write unofficial files.
hd_scania said:
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Click to expand...
Click to collapse
Need to unlock bootloader first. In Download mode, does it have said option to unlock bootloader?