Hi,
I've been trying to apply a new theme on my OPO, and everything works great except the quick settings background, which keeps being all-black.
It happens with all kind of themes.
I have the latest version of blisspop rom so far (V3.9 30.8).
When I did a full wipe and re-flashed the rom the problem was solved, but I don't want to lose all my data and start all over again..
So I assume the source of the problem maybe some data or wrong setting optimizations.
the rom's white/dark theme option doesn't change the problem.
I also have Xposed installed on my device, if that affects somehow....
Please help!
DanelB said:
Hi,
I've been trying to apply a new theme on my OPO, and everything works great except the quick settings background, which keeps being all-black.
It happens with all kind of themes.
I have the latest version of blisspop rom so far (V3.9 30.8).
When I did a full wipe and re-flashed the rom the problem was solved, but I don't want to lose all my data and start all over again..
So I assume the source of the problem maybe some data or wrong setting optimizations.
the rom's white/dark theme option doesn't change the problem.
I also have Xposed installed on my device, if that affects somehow....
Please help!
Click to expand...
Click to collapse
Are u using dark bliss along with theme
It may be cause
Again while applying theme select status bar option
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
I am going through the exact same problem on the exact same device with the exact same versions of update file and gapps zip file.
After almost trying to search any possible solution to it on google and xda, I gave up and tried to solve it myself by looking into the phone itself. There wasnt much I was able to do because of the Crash Loop saying "Unfortunately, Setup Wizard has stopped". So to rest the situation for now, I somehow went into Setting > Apps > Show System > Setup Wizard with setting logo and not the Cynogen Logo one! And Force stopped it.
Also, I cant open my home on the phone either. I press the home button and the Setup Wizard starts to crash again!
Its painful to see your beloved phone struggle to work like that! I sometimes hate CynogenMod for their nightlies and wish I could go back to the stable versions of Oxygen or CM 12!
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Tried More than 5 Different Gapps
playya said:
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
Click to expand...
Click to collapse
Initially, I thought its just an update. So there wont be any need to install Gapps back again. But then The Play store kept crashing. So I rebooted my phone after cleaning Google Play Services and Play Store.
That didn't help. Then Found somewhere written that the issue might be caused by corrupt Gapps or incompatible Gapps, So tried installing The Gapps downloaded from OpenGapps. There I downloaded all the versions of it from , Stock to nano and pico. None of them helped. The Phone is still crashing saying The Setup Wizard has stopped. Can't open Home Screen Either. Can't open Keyboard either.
Abhinav_Rakesh said:
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
abhishek.karvi said:
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
Click to expand...
Click to collapse
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Was getting the same error
Wiped the whole phone off including data reinstalled cm 13 (latest nightly i.e 28112015) and added the opengapps nano package to the flashing zip que in twrp solved the problem
Abhinav_Rakesh said:
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
abhishek.karvi said:
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
Click to expand...
Click to collapse
Found a solution!
Looks like the Gapps from Opengapps werent compatible with the 6.0 Marshmallow yet.
I spent a day looking for different gapps and tried them all on my phone.
The only gapps file which worked with CM13.120151128 update for the oneplus one was this one -->
But before installing this, In TWRP you need to Go to Wipe>Advanced Wipe And select > System, Data, Dalvik and Cache to wipe everything from your phone. Then Fresh install CM13.120151128 and Slim Zero gapps you downloaded from the above link!
All Of this, only if you want to really run your phone with Android 6.0 Marshmallow!
abhishek.karvi said:
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
Click to expand...
Click to collapse
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
Thanks for this, it did the trick for me
Now running CM13.0-20151201 NIGHTLY Bacon.
The error "Setup Wizard Stopped" of in het nederlands "Installatiewizard gestopt" has not shown up again after changing permissions for "Setup Wizard" (one without cm logo)
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
MrSeler said:
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
Click to expand...
Click to collapse
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
maxpayne1989 said:
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
Click to expand...
Click to collapse
yeah i m going to try this a few times more and write what were the results. all i have to do is simply copy the gapps into my phone, the pc sees it but im not able to access it in any way and cant figure out how.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
pankspoo said:
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
Click to expand...
Click to collapse
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
You're a life saver. Thanks for the tip! It works for me.
Yes I have the same setup and the same problem.
Interesting appraoch ... . My problem: I do not have "Setup Wizard" in the Apps List within settings ... and my phone stay unuseable
-------------------------
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I tried this approach to get rid of the "Setup Wizard has stopped" pop-up error, but got an error message when I tried to execute the command ...
>adb shell pm disable com.google.android.setupwizard
CANNOT LINK EXECUTABLE: cannot locate symbol "android_set_rt_ioprio" referenced by "/system/lib/libinputflinger.so".
page record for 0xb6f0f04c was not found (block_size=32)
tungdil said:
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
Click to expand...
Click to collapse
I flashed my oneplus one phone to the latest release of cm (yog7dao1k6). However, now I can't install most of the themes in the app store. The themes will show that it was successfly installed, will appear on the theme engine for 2 seconds and the dissaper giving the error: "Failed to install theme". Anyone faced this issue? and what did you do to solve it?
Note: I wiped (factory reset) and flashed the rom and G-apps myself.
first, you post on wrong section, this should be on Q&A section
second, have you try to clear the data
third, if you have try it done with no success, try to wipe cache n davlik from recovery
hope it help
ali282h said:
I flashed my oneplus one phone to the latest release of cm (yog7dao1k6). However, now I can't install most of the themes in the app store. The themes will show that it was successfly installed, will appear on the theme engine for 2 seconds and the dissaper giving the error: "Failed to install theme". Anyone faced this issue? and what did you do to solve it?
Note: I wiped (factory reset) and flashed the rom and G-apps myself.
Click to expand...
Click to collapse
Reboot your phone and install the themes again. Then they won't disappear..
ali282h said:
I flashed my oneplus one phone to the latest release of cm (yog7dao1k6). However, now I can't install most of the themes in the app store. The themes will show that it was successfly installed, will appear on the theme engine for 2 seconds and the dissaper giving the error: "Failed to install theme". Anyone faced this issue? and what did you do to solve it?
Note: I wiped (factory reset) and flashed the rom and G-apps myself.
Click to expand...
Click to collapse
There was an issue with certain version of deskclock apk. Delete that from system apps ( warning you won't have any clock app, so if your alarm doesn't ring its on you) and try installing theme again.
Usually you can see the error in the logs. If it's not the clock app, then it might be some other app. Provide logs to get better help.
hello everyone, i have a big problem. it's about installing a custom ROM on my Poco X3 (surya). after i unlocked it, i installed the xiaomi.eu ROM (V12.0.9.0.QJGMIXM). So far everything went without problems. but now I wanted to install a custom ROM because I'm not completely happy with MIUI. when I now try to install Havoc, crDroid or rros with the open gapps (pico) I get the following error message after the custom OS is started: "This device isn't Play Protect certified". the device is unfortunately not usable with the OS and the play store also does not open.
am i making any mistakes with the wipe or factory reset or am i missing something? I am happy about any help.
PS: I have also already added the Google Services Framework Android ID of the device registration, which has unfortunately also brought nothing. I also tried Magisk (canary) and the MagistikHide option with no luck.
PPS: in the recovery menu I always get the following message with a custom ROM: "failed to mount /vendor (invalid argument)". can this be ignored? if it can't be mounted, doesn't that mean it doesn't exist? but then why does the xiaomi.eu ROM work with their included gapps?
EDIT: YEAH, ok, i have access to the play store, it was due to the device registration. it just took some time for it to sync with adding the entry.
On a tablet Samsung Galaxy tab 2 10.1 (3G) I installed Lineage OS 14.1, then after I installed the PICO Gapps I realized that the settings screen of the tablet was completely white without any writing .. At this point I tried to reflash from TWRP Lineage but it gave me an error, I then tried to do a factory reset wipe but the automatic startup configuration of lineage crashed, I then tried to make a format given by TWRP and this once android started but I found the gapps and the white screen on settings, how should I do so that I cleanly install the rom in order to solve the problem of the white screen in settings, then trying to install the gapps avoiding that it recurs the white screen problem in settings? Thanks a lot to those who want to help me, I don't know how to solve it.
I tried to do an advance wipe (Davilk, System, Cache, data and internal storage) and then I made a format data, doing so I flashed the rom correctly without errors, immediately after I also installed the pico gapps, thinking that maybe installing them at the same time as the rom that problem of the white screen on settings would not have arisen, while instead nothing has changed unfortunately .. so now I wanted to reflect the rom and try to solve differently with the gapps, but it always gives me error 7 as you can see from screen, the first time it worked facendadvance wipe and formed date now even doing this I always get this error ... the strange thing is that it worked before and now it doesn't ... someone can help me to solve it please?
read here in the post I wrote, practically the first time it worked by reading the guide you gave me and I managed to flash the rom, then I immediately put the gapps back thinking that maybe installing them together with the rom they worked while I always have the problem of the screen white ... so I wanted to reflect the rom without putting the gapps back and then maybe try to install them differently but it gives me the usual error and it does it even if I delete everything as the guide you sent me that the first time had worked ...someone can help me to solve it please?
update, after many tests in the end I managed to flash the rom, there is no explanation, simply trying and trying again it decided to work .. now I have not installed the gapps and the android settings screen I see it correctly ... now what I ask you how can I install the gapps so that I do not create this problem of the white screen in settings? I don't care who knows what google works, I just need the play store I downloaded the PICO gapps from directly from the gapp site by choosing ARM + 7.1 + PICO As you can imagine I would like to avoid finding myself with the same problem again since it is not easy to solve, I am not an expert, so I rely on you .. Thanks a lot to those who want to help me.
fabulas_ said:
I tried to do an advance wipe (Davilk, System, Cache, data and internal storage) and then I made a format data, doing so I flashed the rom correctly without errors, immediately after I also installed the pico gapps, thinking that maybe installing them at the same time as the rom that problem of the white screen on settings would not have arisen, while instead nothing has changed unfortunately .. so now I wanted to reflect the rom and try to solve differently with the gapps, but it always gives me error 7 as you can see from screen, the first time it worked facendadvance wipe and formed date now even doing this I always get this error ... the strange thing is that it worked before and now it doesn't ... someone can help me to solve it please?
read here in the post I wrote, practically the first time it worked by reading the guide you gave me and I managed to flash the rom, then I immediately put the gapps back thinking that maybe installing them together with the rom they worked while I always have the problem of the screen white ... so I wanted to reflect the rom without putting the gapps back and then maybe try to install them differently but it gives me the usual error and it does it even if I delete everything as the guide you sent me that the first time had worked ...someone can help me to solve it please?
Click to expand...
Click to collapse
Use SD card for installation los zip. And download it again, if you'll still get same error than change TWRP version.
drnightshadow said:
Use SD card for installation los zip. And download it again, if you'll still get same error than change TWRP version.
Click to expand...
Click to collapse
yes I used the sd card to install the rom, I just made a post a few seconds before you wrote saying that you have solved the installation of the rom. Actually I downloaded the rom again, but I don't think this is the cause since a few minutes before the installation of the rom had worked ... then I also tried to transfer the rom file back from the pc to the microsd and it always did not work, as soon as the 'i downloaded again it worked..so i guess it was a coincidence ... Now as I said in the previous post to yours, the problem is how to install the gapps or in any case, even just the play store is okay with me ... I would like to avoid the problem of the white screen in android settings that I had by installing the PICO gapps recur again ... anyway I wrote everything in detail in the previous post ... I hope someone can help me. Thanks
fabulas_ said:
yes I used the sd card to install the rom, I just made a post a few seconds before you wrote saying that you have solved the installation of the rom. Actually I downloaded the rom again, but I don't think this is the cause since a few minutes before the installation of the rom had worked ... then I also tried to transfer the rom file back from the pc to the microsd and it always did not work, as soon as the 'i downloaded again it worked..so i guess it was a coincidence ... Now as I said in the previous post to yours, the problem is how to install the gapps or in any case, even just the play store is okay with me ... I would like to avoid the problem of the white screen in android settings that I had by installing the PICO gapps recur again ... anyway I wrote everything in detail in the previous post ... I hope someone can help me. Thanks
Click to expand...
Click to collapse
My bee it's gapps bug, this is not the first time to happening this.
I don't use gapps at all, specially not on that prehistoric device. It's laggy and pretty much slow and useless.. I advice you to check AuroraStore (FOSS Google play) on xda forum or install f-droid and search it there.
[App][4.4+] Aurora Store - Open Source Play Store client [May 31 2023]
Aurora Store Unofficial Google Play client Disclaimer : Using Aurora Store with your own Google account may cause your account to be blacklisted, use at your own risk. Aurora Store is an Unofficial FOSS client to Google's Play Store, with an...
forum.xda-developers.com
drnightshadow said:
My bee it's gapps bug, this is not the first time to happening this.
I don't use gapps at all, specially not on that prehistoric device. It's laggy and pretty much slow and useless.. I advice you to check AuroraStore (FOSS Google play) on xda forum or install f-droid and search it there.
[App][4.4+] Aurora Store - Open Source Play Store client [May 31 2023]
Aurora Store Unofficial Google Play client Disclaimer : Using Aurora Store with your own Google account may cause your account to be blacklisted, use at your own risk. Aurora Store is an Unofficial FOSS client to Google's Play Store, with an...
forum.xda-developers.com
Click to expand...
Click to collapse
so the white screen on settings is a problem that has already happened to others with the installation of gapps, the strange thing is that I have seen on tyoutube others who have installed it without problems having the same device .. however if there are alternatives I can do without it.
I installed Aurora store 4.1.1, in the installation procedure I left the checkmarks that were by default and I always went ahead .. right? I did a bit of research to test this new app since I didn't know it .. and I saw that it has everything, but maybe not everything that the play store has, for example the YAP app (by nexi payment) it is not there, while for example on aptoide it is found .. why? From what I understood Aurora store should have all the apps from the play store so it is strange that there is not this one too.
For more info go to AuroraStore thread
[App][4.4+] Aurora Store - Open Source Play Store client [May 31 2023]
Aurora Store Unofficial Google Play client Disclaimer : Using Aurora Store with your own Google account may cause your account to be blacklisted, use at your own risk. Aurora Store is an Unofficial FOSS client to Google's Play Store, with an...
forum.xda-developers.com