Related
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
Installation:
You need to have installed Clockworkmod recovery!
Boot into recovery by pressing Call+Volume Up+Power.
After that install the ROM from the SD card using ClockworkMod Recovery!
+If you want Google apps then install this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
About Me: I have been cooking ROMs since 2011 and my first developed ROMs for Huawei U8500 were CyanogenMod ROMs.
Known issues*
1. OpenMax
2. FM Radio
3. Camera (video recording)
Changes
CyanogenMod 9.0.0 Nightly 2012.06.18
Updated CyanogenMod source!
Added tweaks!
Fixed D-Pad!
CyanogenMod 9.0.0 Nightly 2012.06.13
Updated CyanogenMod source
A lot of bug fixes
CyanogenMod 9
Initial release
Current release
CyanogenMod 9.0.0 Nightly 2012.06.18
Previous releases
CyanogenMod 9.0.0 Nightly 2012.06.13
CyanogenMod 9
Ask me if you need to!
Market
And one of the bugs is Market get's error
gapps
Plz give me working gapps link
Thanks for your development
mohithimu said:
Plz give me working gapps link
Thanks for your development
Click to expand...
Click to collapse
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
gyilki said:
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
Click to expand...
Click to collapse
on my phone after wipe market is still don't working :\ what gaaps you are using? if you can share link
question: can you turn off the trackpad mouse pointer, to work as 2.3.7
galery not working properly
otherwise a good rom, I like it
Pointer remover!
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Update Not working so you need to put those files in /system folder by yourself!
Pointer will be fixed in next update!
Can't impossible get Gapps to work. Have tried evrything (I think)!
Have tried a couple other Gapps then latest one given in this thread.
Have tried installing CM9 and Gapps a couple of times, with reboot and cleaning cache etc in diffrent orders... without luck.
Latest I tried clearing cache, data, dalvik, etc.
Installed CM9.
Installed Gapps (given above in thread)
Reboot.
Evrything seems to work, but no icons/apps appear... >_<
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Install it from ClockworkMod recovery!
Click to expand...
Click to collapse
not working:-(
great job
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Click to expand...
Click to collapse
thanks, its work for me!!
when i want install new release recovery show me that installation aborted
Now I've done some more testing... and done the installation over and over a couple of times
Theese are my conclusions:
* Installation of Gapps is partially working!
From one installation to another, diffrent apps and function is installed (or working) on the phone.
Theese functions I've found (so far) that vary from time to time:
* Gmail
* Market
* Screen lock
* Installation guide program when new user/clean installation
tested
After a while I managed to set up it to work good
1.wipe data factory reset, dalvik cache...everything
2.flash rom
3.wait for the phone to start
4.wipe again,start the phone
5.flash gpapps
Instead of stock gallery use quick pick.
Little bit slow when entering menu (probably becouse of stock zoom effect).
market working,camera working, synced account without problems
Great job!
I installed CyanogenMod 9.0.0 Nightly 2012.06.18
My phone just flies.
Battery lasts a long time
RAM size 140 MB (it is very good)
Less:
*1.The graphics system sometimes produces errors
*2.File Manager does not play music
Otherwise, I like ...
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
FIX!
Zbajchou said:
when i want install new release recovery show me that installation aborted
Click to expand...
Click to collapse
pedjakis said:
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
Click to expand...
Click to collapse
Zbajchou, I have fixed the update so download it again!
pedjakis, install Attached File!
How could we install google talk on this rom?
Graphics bug.Dunno what to do.Very annoying.
EDIT:Factory reset helped. Very happy now.Awesome ROM!
EDIT2:No sound when sms comes.Is there any fix?
Great Job!
Hi Klavsanson,
I've installed the latest version and It's working almost everything, great
I don't know if it's my phone, but I can't neither use USB nor wifi tethering. This is important for my job.
I've previously wiped data, cache, dalvik
Gallery has an extrange behaviour as is not possible to see correctly anything-
Thanks for your job
Just out of curiosity
how come that gapps are so massive in size 80mb ?compared to cm7 only 9mb
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
I am going through the exact same problem on the exact same device with the exact same versions of update file and gapps zip file.
After almost trying to search any possible solution to it on google and xda, I gave up and tried to solve it myself by looking into the phone itself. There wasnt much I was able to do because of the Crash Loop saying "Unfortunately, Setup Wizard has stopped". So to rest the situation for now, I somehow went into Setting > Apps > Show System > Setup Wizard with setting logo and not the Cynogen Logo one! And Force stopped it.
Also, I cant open my home on the phone either. I press the home button and the Setup Wizard starts to crash again!
Its painful to see your beloved phone struggle to work like that! I sometimes hate CynogenMod for their nightlies and wish I could go back to the stable versions of Oxygen or CM 12!
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Tried More than 5 Different Gapps
playya said:
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
Click to expand...
Click to collapse
Initially, I thought its just an update. So there wont be any need to install Gapps back again. But then The Play store kept crashing. So I rebooted my phone after cleaning Google Play Services and Play Store.
That didn't help. Then Found somewhere written that the issue might be caused by corrupt Gapps or incompatible Gapps, So tried installing The Gapps downloaded from OpenGapps. There I downloaded all the versions of it from , Stock to nano and pico. None of them helped. The Phone is still crashing saying The Setup Wizard has stopped. Can't open Home Screen Either. Can't open Keyboard either.
Abhinav_Rakesh said:
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
abhishek.karvi said:
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
Click to expand...
Click to collapse
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Was getting the same error
Wiped the whole phone off including data reinstalled cm 13 (latest nightly i.e 28112015) and added the opengapps nano package to the flashing zip que in twrp solved the problem
Abhinav_Rakesh said:
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
abhishek.karvi said:
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
Click to expand...
Click to collapse
Found a solution!
Looks like the Gapps from Opengapps werent compatible with the 6.0 Marshmallow yet.
I spent a day looking for different gapps and tried them all on my phone.
The only gapps file which worked with CM13.120151128 update for the oneplus one was this one -->
But before installing this, In TWRP you need to Go to Wipe>Advanced Wipe And select > System, Data, Dalvik and Cache to wipe everything from your phone. Then Fresh install CM13.120151128 and Slim Zero gapps you downloaded from the above link!
All Of this, only if you want to really run your phone with Android 6.0 Marshmallow!
abhishek.karvi said:
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
Click to expand...
Click to collapse
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
Thanks for this, it did the trick for me
Now running CM13.0-20151201 NIGHTLY Bacon.
The error "Setup Wizard Stopped" of in het nederlands "Installatiewizard gestopt" has not shown up again after changing permissions for "Setup Wizard" (one without cm logo)
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
MrSeler said:
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
Click to expand...
Click to collapse
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
maxpayne1989 said:
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
Click to expand...
Click to collapse
yeah i m going to try this a few times more and write what were the results. all i have to do is simply copy the gapps into my phone, the pc sees it but im not able to access it in any way and cant figure out how.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
pankspoo said:
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
Click to expand...
Click to collapse
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
You're a life saver. Thanks for the tip! It works for me.
Yes I have the same setup and the same problem.
Interesting appraoch ... . My problem: I do not have "Setup Wizard" in the Apps List within settings ... and my phone stay unuseable
-------------------------
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I tried this approach to get rid of the "Setup Wizard has stopped" pop-up error, but got an error message when I tried to execute the command ...
>adb shell pm disable com.google.android.setupwizard
CANNOT LINK EXECUTABLE: cannot locate symbol "android_set_rt_ioprio" referenced by "/system/lib/libinputflinger.so".
page record for 0xb6f0f04c was not found (block_size=32)
tungdil said:
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
Click to expand...
Click to collapse
Hi together,
after flashing the open gapps I got this:
"Unfortunately, Setup Wizard has stopped"" application crashed message
I tried the full -> Error 70
only the nano could be flashed and after reboot I got the same error: "Unfortunately, Setup Wizard has stopped"" application crashed message
I also tried to wipe ... no changes ..
what can I do to get gapps running on CM13?
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
strozi78 said:
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
Click to expand...
Click to collapse
haven't found one yet ... and you?
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
solved! ... deleted google accound and remapped
Only the Setup wizard popup stops coming. Thanks for that.
There is a random popup about Google Play services which disappears on its own. I have given all permissions to the Google Play services app using the same steps as provided earlier. Still the same.
Please help.
Also in addition to this, there is a fix given by the OpenGAPPS team on GitHub as Notes for Android 6.0 (Sorry, cannot post link as this is my first post).
Can anyone help me patch this file onto my device (LG Nexus 5)?
Thanks in advance.
Maybe try different versions of gapps? I use the latest pico version and it works on the latest nightly.
I tried, micro, pico, stock.. All with same results. I was using nightly that came out on 12/02/2015.
Currently I reverted back to cm12.1 as I need to use the phone for day to day stuff. Please let me know if the latest nightly does actually fix this. And also which gapps, I will download the specified file and let you know by weekend.
Thanks for the help!
Try these gapps: http://opengapps.org
Yes I was using gapps from this site. I just need confirmation if the new cm13 nightly actually fixes the issue.
I guess it's not even with Cyanogen to fix the issue. The gapps when installed (flashed) , don't get the desired permissions to execute. It should be the a new gapps build released by opengapps. Still, I will keep searching.
PS: please look at the fix given by gapps team. I also don't know where to modify that code.
Here is how i got it to work.
1) Boot to recovery
2) Do a full wipe (Data,System,Cache,Dalvik)
3)Flash CM13
4)Do a wipe (Cache,Dalvik)
5)Flash GAPPS ( I used pico from Open Gapps)
6)Do a wipe (Cache,Dalvik)
7) Do a Factory Reset.
8) Reboot !
That should do it, Don't complain about useless wipes after trying for 2 days this finally worked !
I have my lovely G3 back
Good Luck !
I got it to work to flash it together with the ROM.
Cheers
I managed to make it work by installing CM13, in recovery mount /system and check how much space left on you system partition. After that you can choose the maximum size Gapps that fits the free space.
Wipe all excluding sdcard and USB-OTG. Install CM13 and Gapps together.
After reboot the wizard will not crash.
Other option is risky and can turn your phone into a break This is option is to resize /system to make it bigger.
I used the latest nightly CM13 for Xiaomi Mi4 and twrp-2.8.7.0-cancro
Solved
This guy will solve your issue watch this video
Search
Moto G Cm13 Gapps Fix (Setup Wizard)-TechZotic
on YouTube
sorry couldnt paste link as i am a new user
holzfelix said:
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
Click to expand...
Click to collapse
Thanks. This worked for me, although I had 2 Setup Wizard apps. The one with the CM logo had no permissions that needed assigning. The other one did. Once permissions were given, the issue went away. It was tricky to do it between the error dialogs appearing. What helped was switching to the guest account and back, then, occasionally, you had enough time to work the settings.
Had those Problems often, don't know why.
I just delete the settingwizard.apk in twrp (mount system, then system/priv-app if I remember).
Worked Several Times for me - you must do that always After flashing gapps!
My Fix....worked for me on HTC One M8
NOTE: Ensure you have a NANDROID backup BEFORE proceeding with the below, just in case something goes wrong
1. Ensure that you have all required files (CM13 Zip and Open GAPP Zip) saved to your phone (internal or SD card)
2. In my case, I used TWRP, so ensure you have the latest one
3. Boot into TWRP recovery
4. Using ‘WIPE’ option, select ‘Advance’ and choose: Data, Dalvik, Cache, System
5. Using ‘INSTALL’ option, Install CM13 via TWRP
6. DO NOT BOOT UP PHONE JUST YET
7. Perform a Cache and Dalvik wipe
8. Using ‘INSTALL’ option, Install GAPP Zip via TWRP (I used GAPP mini due to space)
9. Now you may reboot the phone.
The solved the ‘Setup not working’ issue for me and my phone is now working like a charm with CM13 and google apps! I have a HTC One M8 FYI
ThankYou So MUCH!
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
You're A Life Saver! Thanks!
please share solution for this or any working apps link..
I'm having problems post-flashing, getting the "trebuchet has stopped", google services has stopped, and various other google services crashing.
Flashed CM 13.1 from this thread;
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Flashed the marshmallow base G-apps from here:
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
After crashing, it gets stuck in the CyanogenMod blue character boot screen but will reboot eventual if I hold the power button a couple times.
I tried the various trebhchet "solutions" I've seen posted (force stop, clear cache there and in contacts) which doesn't solve the problem. I've also skipped the google sign in the setup wizard and went straight to apps to set permissions and to play store to download Google app and Google Now as a couple threads have suggested.
Looking for help please
paulsoncpa said:
I'm having problems post-flashing, getting the "trebuchet has stopped", google services has stopped, and various other google services crashing.
Flashed CM 13.1 from this thread;
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Flashed the marshmallow base G-apps from here:
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
After crashing, it gets stuck in the CyanogenMod blue character boot screen but will reboot eventual if I hold the power button a couple times.
I tried the various trebhchet "solutions" I've seen posted (force stop, clear cache there and in contacts) which doesn't solve the problem. I've also skipped the google sign in the setup wizard and went straight to apps to set permissions and to play store to download Google app and Google Now as a couple threads have suggested.
Looking for help please
Click to expand...
Click to collapse
Flash ROM
reboot to system
reboot to recovery
flash gapps
reboot to system = errors
Reboot to recovery
Flash ROM
Flash Gapps
reboot to system = no force errors.
billysam said:
Flash ROM
reboot to system
reboot to recovery
flash gapps
reboot to system = errors
Reboot to recovery
Flash ROM
Flash Gapps
reboot to system = no force errors.
Click to expand...
Click to collapse
I'm pretty sure I did both and was getting errors either way. But I can try again and go with a clean install of CM.
So should I start from scratch (not worried about saving any data as It has been erased a couple times in my various attempts to fix it):
1.re-format
2.Flash recovery
3.Flash Gapps
4 reboot to system?
I read the reason for for the trebuchet error was because of it's tied in with the Google App (or Google Now) which is not included in the base gapps that I linked.
paulsoncpa said:
I'm pretty sure I did both and was getting errors either way. But I can try again and go with a clean install of CM.
So should I start from scratch (not worried about saving any data as It has been erased a couple times in my various attempts to fix it):
1.re-format
2.Flash recovery
3.Flash Gapps
4 reboot to system?
I read the reason for for the trebuchet error was because of it's tied in with the Google App (or Google Now) which is not included in the base gapps that I linked.
Click to expand...
Click to collapse
if that would be the case, there are many users using delta base gapps with cm13 with a clean install, why wouldn't we also had the same issue, including devs?
billysam said:
if that would be the case, there are many users using delta base gapps with cm13 with a clean install, why wouldn't we also had the same issue, including devs?
Click to expand...
Click to collapse
That's what I figured. I didn't see any threads under the CM 13 of people having issues so figured it was most likely in my flash process. I did re-format and re-flashed and it is fine now, so far. I did run into the trebuchet issue one time, but was able to force close, clear trebuchet cache, and change the permissions/defaults to fix it.
Something I did with setting the default launcher triggered the error, but not sure what.
Thanks for your help!
After release of many apps in APKMirror, i tried to install many of them & updated mine in S7 Edge!
1- Like TouchWiz! But i just figure out that every time when i reboot all my apps in the Laucher lost their Orders that i was made! I clear Cache & Data of the TouchWiz app but still the same problem!
2- Today when i tried to update the Clock app they give me an error conatain that i installed the same package... i clear Cache & Data of the app, i've no Lock Screen security or PIN either no fingerprint! I reboot and i clear the Phone cache too! And the problem is stil!
Please any solutions ????
Mrbinki said:
After release of many apps in APKMirror, i tried to install many of them & updated mine in S7 Edge!
1- Like TouchWiz! But i just figure out that every time when i reboot all my apps in the Laucher lost their Orders that i was made! I clear Cache & Data of the TouchWiz app but still the same problem!
2- Today when i tried to update the Clock app they give me an error conatain that i installed the same package... i clear Cache & Data of the app, i've no Lock Screen security or PIN either no fingerprint! I reboot and i clear the Phone cache too! And the problem is stil!
Please any solutions ????
Click to expand...
Click to collapse
replace the clock.apk with root explorer in system/app thats the solution for that
smikel82 said:
replace the clock.apk with root explorer in system/app thats the solution for that
Click to expand...
Click to collapse
I haven't root!
Mrbinki said:
After release of many apps in APKMirror, i tried to install many of them & updated mine in S7 Edge!
1- Like TouchWiz! But i just figure out that every time when i reboot all my apps in the Laucher lost their Orders that i was made! I clear Cache & Data of the TouchWiz app but still the same problem!
2- Today when i tried to update the Clock app they give me an error conatain that i installed the same package... i clear Cache & Data of the app, i've no Lock Screen security or PIN either no fingerprint! I reboot and i clear the Phone cache too! And the problem is stil!
Please any solutions
Click to expand...
Click to collapse
For the Clock, unistall first any update of the stock Clock app, then install the one from S8.
heuropt said:
For the Clock, unistall first any update of the stock Clock app, then install the one from S8.
Click to expand...
Click to collapse
I tried and still the same problem
Mrbinki said:
After release of many apps in APKMirror, i tried to install many of them & updated mine in S7 Edge!
1- Like TouchWiz! But i just figure out that every time when i reboot all my apps in the Laucher lost their Orders that i was made! I clear Cache & Data of the TouchWiz app but still the same problem!
2- Today when i tried to update the Clock app they give me an error conatain that i installed the same package... i clear Cache & Data of the app, i've no Lock Screen security or PIN either no fingerprint! I reboot and i clear the Phone cache too! And the problem is stil!
Please any solutions
Click to expand...
Click to collapse
Mrbinki said:
I tried and still the same problem
Click to expand...
Click to collapse
try this version https://mega.nz/#!C1g2mAwa!mEFp6sDv5...ZPd4X3DRa8wGys
Mrbinki said:
After release of many apps in APKMirror, i tried to install many of them & updated mine in S7 Edge!
1- Like TouchWiz! But i just figure out that every time when i reboot all my apps in the Laucher lost their Orders that i was made! I clear Cache & Data of the TouchWiz app but still the same problem!
2- Today when i tried to update the Clock app they give me an error conatain that i installed the same package... i clear Cache & Data of the app, i've no Lock Screen security or PIN either no fingerprint! I reboot and i clear the Phone cache too! And the problem is stil!
Please any solutions
Click to expand...
Click to collapse
I do not have the first problem, and the second one also not. Everything works without root.
heuropt said:
try this version https://mega.nz/#!C1g2mAwa!mEFp6sDv5...ZPd4X3DRa8wGys
Click to expand...
Click to collapse
I need the password for download it!
arnes_king said:
I do not have the first problem, and the second one also not. Everything works without root.
Click to expand...
Click to collapse
You're lucky! Do you use Package Disabler?
Mrbinki said:
I need the password for download it!
Click to expand...
Click to collapse
try the attached file
heuropt said:
hmm, try the one from apkmirror.com search for Samsung Clock
Click to expand...
Click to collapse
I tried all of them the same message appear!
Not only for Clock app! But for all others like: Photo Editor, Sound Picker...
Mrbinki said:
I tried all of them the same message appear!
Not only for Clock app! But for all others like: Photo Editor, Sound Picker...
Click to expand...
Click to collapse
In the Developer Options try to turn on "Auto update system"
heuropt said:
In the Developer Options try to turn on "Auto update system"
Click to expand...
Click to collapse
Already enabled!
Place shortcut on ur home screen. Restart phone. Click to install as quickly as you can after boot.
I used the system dump apps and installed them one by one. Rooted my phone and everything is working perfectly. Rooted Sprint GS7 edge
If your on btu and updated to latest firmware. Somehow samsungs has block updates to samsung apps so all s8 apps will give you conflicts at installing