[ROM][CM9][ICS] CyanogenMod 9 for Huawei U8500 - Miscellaneous Android Development

CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
Installation:
You need to have installed Clockworkmod recovery!
Boot into recovery by pressing Call+Volume Up+Power.
After that install the ROM from the SD card using ClockworkMod Recovery!
+If you want Google apps then install this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
About Me: I have been cooking ROMs since 2011 and my first developed ROMs for Huawei U8500 were CyanogenMod ROMs.
Known issues*
1. OpenMax
2. FM Radio
3. Camera (video recording)
Changes
CyanogenMod 9.0.0 Nightly 2012.06.18
Updated CyanogenMod source!
Added tweaks!
Fixed D-Pad!
CyanogenMod 9.0.0 Nightly 2012.06.13
Updated CyanogenMod source
A lot of bug fixes
CyanogenMod 9
Initial release
Current release
CyanogenMod 9.0.0 Nightly 2012.06.18
Previous releases
CyanogenMod 9.0.0 Nightly 2012.06.13
CyanogenMod 9
Ask me if you need to!

Market
And one of the bugs is Market get's error

gapps
Plz give me working gapps link
Thanks for your development

mohithimu said:
Plz give me working gapps link
Thanks for your development
Click to expand...
Click to collapse
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery

gyilki said:
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
Click to expand...
Click to collapse
on my phone after wipe market is still don't working :\ what gaaps you are using? if you can share link

question: can you turn off the trackpad mouse pointer, to work as 2.3.7
galery not working properly
otherwise a good rom, I like it

Pointer remover!
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Update Not working so you need to put those files in /system folder by yourself!
Pointer will be fixed in next update!

Can't impossible get Gapps to work. Have tried evrything (I think)!
Have tried a couple other Gapps then latest one given in this thread.
Have tried installing CM9 and Gapps a couple of times, with reboot and cleaning cache etc in diffrent orders... without luck.
Latest I tried clearing cache, data, dalvik, etc.
Installed CM9.
Installed Gapps (given above in thread)
Reboot.
Evrything seems to work, but no icons/apps appear... >_<

klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Install it from ClockworkMod recovery!
Click to expand...
Click to collapse
not working:-(

great job
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Click to expand...
Click to collapse
thanks, its work for me!!

when i want install new release recovery show me that installation aborted

Now I've done some more testing... and done the installation over and over a couple of times
Theese are my conclusions:
* Installation of Gapps is partially working!
From one installation to another, diffrent apps and function is installed (or working) on the phone.
Theese functions I've found (so far) that vary from time to time:
* Gmail
* Market
* Screen lock
* Installation guide program when new user/clean installation

tested
After a while I managed to set up it to work good
1.wipe data factory reset, dalvik cache...everything
2.flash rom
3.wait for the phone to start
4.wipe again,start the phone
5.flash gpapps
Instead of stock gallery use quick pick.
Little bit slow when entering menu (probably becouse of stock zoom effect).
market working,camera working, synced account without problems

Great job!
I installed CyanogenMod 9.0.0 Nightly 2012.06.18
My phone just flies.
Battery lasts a long time
RAM size 140 MB (it is very good)
Less:
*1.The graphics system sometimes produces errors
*2.File Manager does not play music
Otherwise, I like ...

i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english

FIX!
Zbajchou said:
when i want install new release recovery show me that installation aborted
Click to expand...
Click to collapse
pedjakis said:
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
Click to expand...
Click to collapse
Zbajchou, I have fixed the update so download it again!
pedjakis, install Attached File!

How could we install google talk on this rom?

Graphics bug.Dunno what to do.Very annoying.
EDIT:Factory reset helped. Very happy now.Awesome ROM!
EDIT2:No sound when sms comes.Is there any fix?

Great Job!
Hi Klavsanson,
I've installed the latest version and It's working almost everything, great
I don't know if it's my phone, but I can't neither use USB nor wifi tethering. This is important for my job.
I've previously wiped data, cache, dalvik
Gallery has an extrange behaviour as is not possible to see correctly anything-
Thanks for your job

Just out of curiosity
how come that gapps are so massive in size 80mb ?compared to cm7 only 9mb

Related

[APP] Updated GAPPS with Google Talk Video (2.3+)

FULLY WORKING VOICE/VIDEO CHAT! Two-Way Video and Incoming Calls for 2.3+
5/4/2011
UPDATE!
lithid-cm has incorporated the updated GoogleServicesFramework.apk I FOUND into his Flashable GAPPS Update here:
http://www.mediafire.com/?92475r3frlncg29
Just Flash, Wipe Dalvik and Cache, and you are set!
Thanks everyone, for jumping in, flashing, and figuring it out with me! I'm sure this will be incorporated into all 2.3+ roms very, very soon.
(Anyone tried this on 2.2? Its a long shot, but might make some progress if I had testers)
All ROMS:
- Switching to the back camera causes a FC. This is probably hardware/lib oriented, so I am not going to chase after this one. If anyone has ideas for how to fix it, I'd be glad to give it a try.
Working:
CM7 2.3.3 (7.0, Nightly 57 and 62 Confirmed)
Decks 1.0
MIUI 1.4.22
Ginger-Alev1 (SENSE)
Other ASOP ROMS should work too...
Working w/ Some Issues:
- Some Sense-based ROMs (Fresh, Caulkin, etc) have an issue where the camera will not rotate with the gyro, and Gmail users will see you sideways. Again, no idea what causes this, but open to suggestions.
Not Working:
[KERNEL] Tiamat 4.0.0
ARCHIVE:
5/3/2011
UPDATE!
I just Wiped completely, installed CM7 (nightly 57) and got it working again from scratch.
The simplified version:
1) Flash 2.3.4-GAPPS from here:
http://www.mediafire.com/?p05q54839gjzt
2) Push GoogleServicesFramework.apk to /system/app and set permissions to RWX (Link on the OP)
3) Reboot Recovery, Clear Cache and Dalvik
4) In Android, Manage Applications, Wipe data for GoogleServicesFramework and Google Talk
5) Make a test call, and let me know how it goes.
Worked FLAWLESSLY for me on CM7 2.3.3 (57)
If I get more responses, Ill start a more detailed thread (with Flashable ZIPs and whatnot) so that more people can get access to this.
5/1/2011
UPDATE:
I am running option #1 below with a few modifications:
I took a stock 2.3.4 ROM from the NEXUS S forum (where they have gTalk working courtesy of google) and unpacked
I pushed the following to /system/app with standard app permissions:
CameraGoogle.apk
GoogleServicesFramework.apk
googlevoice.apk
(all attached)
Reboot to recovery, wipe dalvik and cache, and POW
Working Video Chat!
I don't know which APK fixed it, but i know they were patched in the 2.3.4 update... and it is working...
I don't have time to look into it right now... but feel free to give it a try on other ROMS and let me know how it goes.
Resolved Issues:
1. Incoming calls are received!
2. Outgoing Calls connect, and Video is Transmitted!
Known Issues:
1. Switching to rear camera STILL FC's (prob a camera driver, not software)
4/30/2011
Google Talk Video/Voice Chat Finally working...
UPDATE: There are now quite a few methods for installing Google Talk 1.3 (with video chat):
1. Flash the 2.3.4 Stock Gingerbread Port by lithid-cm (which I find to be the most reliable... and Stable!) and the latest GAPPS
http://forum.xda-developers.com/showthread.php?t=1056101
3. Flash the latest GAPPS from the above post onto any Gingerbread based system (2.3+) which still FC's for me sometimes
2. Install the APK and modify permissions manually (I have had limited luck with this method... FC's sometimes)
http://forum.xda-developers.com/showthread.php?p=13402925#post13402925
3. Flash the GTALK.zip package from this post. I have not tried it but some people have had results
http://forum.xda-developers.com/showpost.php?p=13330426&postcount=20
If anyone figures anything else out, please let me know.
link to the gapps?
dadoc04 said:
link to the gapps?
Click to expand...
Click to collapse
http://www.mediafire.com/?nmyy2x2p72ptcd7
When I try it with someone using gmail, I can see them, but they cannot see me...
it doesnt work for me at all on cm 7.0.0.2 all my google apps are broken now
No go on the desire rom
I used a loopback gmail ID, and saw myself (with a lag). try this address: [email protected]
But voice is working?
addisonhammer said:
I used a loopback gmail ID, and saw myself (with a lag). try this address: [email protected]
But voice is working?
Click to expand...
Click to collapse
Voice is definitely working if I do a voice call, but on a video call it seems to only be one way...
Since it was intended for the Nexus S... it is likely you need an ASOP ROM for this to work.
whats funny is google pulled google talk from the market.....
It doesn't work though. on my CM7 it crashes when you try to make a voice call.
addisonhammer said:
Since it was intended for the Nexus S... it is likely you need an ASOP ROM for this to work.
Click to expand...
Click to collapse
Yes, I am using CM7.
installed fine and showed vid cams beside names....
forced close when connecting.
dadoc04 said:
worked for me... im on nightly 57
just wiped cache and dalvik before flashing the newest gapps
Click to expand...
Click to collapse
I'm on latest CM release (7.0.2) and it FC's for me. I tried to wipe cache and dalvik and clear data for Talk but still FC.
^^ sorry about that... i was editing my post as you quoted me
Let me know if it continues to work... mine broke for some reason and FC's now. When I make voice calls... it will connect and work AS the FC window comes up, and continues to work until i click FC.
I didnt reboot or anything... just stopped working. Tried reflashing and clearing cache... no luck
lame.
CM 7.0.2.1 FC on my end. I can see the Cam icon but as soon as I tap on it, it FCs
I'm running a asop rom, going to flash now and see
Sent from my HTC EVO 4G Android 2.3.3 using Tapatalk Premium
CM 7.0.2.1 here. Flashed update. Wiped Dalvik. Cleared Talk app data. FCs when I tap a video cam icon. The libTalk_jni.so file you mention isn't in the .zip nor did it get installed on my device in /system/lib.
keanon said:
CM 7.0.2.1 here. Flashed update. Wiped Dalvik. Cleared Talk app data. FCs when I tap a video cam icon. The libTalk_jni.so file you mention isn't in the .zip nor did it get installed on my device in /system/lib.
Click to expand...
Click to collapse
What hardware version are you on ? i'm V.3

[SOLVED] [Q] Cyanogenmod 7 Magpie for g1/Dream

Hi
I just installed Cyanogenmod 7 Magpie for g1/Dream.
But gapps are not here, and I tried a few version and it doesn't work.
Can someone point me to the right version of gapps?
thanks
What do you need specifically?
If you need GMail, GTalk, GMap, you can download that from the market. That is what I did.
I've had the same problem, just install magpie then install google apps. restart. then you will see you don't have them so you restart again and you should at least see books in your list.
Well, this is what I did
EzGb Gapps are working with cm7 magpie. Install the latest one (top of the last quote)
BeenAndroidized said:
If you need GMail, GTalk, GMap, you can download that from the market. That is what I did.
Click to expand...
Click to collapse
I don't even have the Market app...
lacus88 said:
EzGb Gapps are working with cm7 magpie. Install the latest one (top of the last quote)
Click to expand...
Click to collapse
ok thanks I got the file and flashed it...then I can log in to my google account and download the gapps...but it just stopped in the middle of the downloading process, I see the desktop, empty, and can do nothing .
Is there a different .zip for EB1 (french Dream)?
There are two .zip for installing CM 7 Magpie in french, should I install the one whose name contains "obex"...I don't know what is obex?
thanks
It's odex, not obex, but no, you don't need that. You need the latest version of the rom: update-cm-7-20110727-Magpie-DS-signed.zip plus gapps from terry's thread, don't worry it contains french.
I assume that you assume FR means french but no, it means Firerat, so you installed a very old version of the rom.
Btw about the market install/download fails
Buuggggss
I expect there are more than listed here
Sometimes a market install fails complaing about space
usually a second attempt works
the pm command can start a soft reboot if the file argument you give it doesn't exist
It was broken before I started messing with it, I should fix it but keep forgetting
Click to expand...
Click to collapse
Yes indeed I assumed FR meant French!
Ok but when I tried to install the the more recent .zip, I had the android.phone app crashing constantly, making the phone unusable.
edit: I reflashed the rom, and the gapps at the same time, it seems to work fine now.
thanks to you all
Wipe properly, from fastboot! If you use ext, than format it. Everything should be okay.
I'm running it right now, since it's released. I didn't have a single problem with it, it's a lil slow compared to fbl, but it's working ok.
I didn't know it was better to wipe from fastboot.
I wiped from recovery, I flashed the rom and gapps immediately. Then I booted to rom, and it is ok.
Cyanogenmod 7 magpie seems to work fine, but, indeed, a little slower than froyobylaszlo. How froyobylaszlo was getting unusable for me because of the "damaged sd card" error, and made me loose a lot of data (and was not in french).
Thanks to you all for your help.

[CM7][i9001][PORT][LEWA][MULTI-LANG]

I have ported LeWa based on CM7 fixed 2.1 and ported from LG GT540 Optimus, which results in a stable working rom.
My first public release was version 0.4, which was published in the other (AOSP) LeWa thread. Now I have created my own thread to release version 0.6, which is also based on CM7 fixed 2.1 but contains multi-language!
Known errors:
- CM7 bugs
- Default lockscreen appears very tiny (use thememanager to select a different lockscreen if this bothers you)
Troubleshooting:
- In case of no 3g data, make sure the APN settings are correct
- GPS: make sure you turn on 'internal gps' in settings
- Use fasterfix to select the right pool
- Use setdns to set dns ;-)
- In case first boot doesn't continue after bootanimation, hold the power button until the device reboots again, now it will boot.
Installation:
- Use CWM recovery
- Wipe data/Factory reset
- Wipe Cache
- Wipe Dalvik
- Install using CWM recovery
- Install Gapps trough CWM
Disclaimer:
- Your warranty is now void
- I am not responsible in any way for whatever may or may not happen to your device or anything else in the world.
Link:
version 0.6:
https://sourceforge.net/projects/lewa/files/Lewa_i9001_Jacketti.0.6.e.zip/download
version 0.4:
https://sourceforge.net/projects/lewa/files/Lewa_i9001_Jacketti.0.4.zip/download
Muchos gracias:
ThauExodus
Mazen912 for CM7
LeWa team
Changelog:
0.6:
- removed some chinese system apps
- added multi language
0.4:
- first release
reserved 2
I download now, and testing this. Going to be a good
I would say to remove the lucky patcher granted superuser permissions before you will get your account disabled
warez aren`t alloud around here

			
				
haha that was for like arrrr totally unrelated tests on the rom or something
chasemyass said:
I would say to remove the lucky patcher granted superuser permissions before you will get your account disabled
warez aren`t alloud around here
Click to expand...
Click to collapse
Loving this
Loving this ROM thanks uploader
I have an issue with gapps. When I access some apps on GPlay i get a not compatible error have flashed the latest gapps/wipe cache etc but the problem still persists. What could be the problem?
Thanks
could you give an example of such an app? I'll try it on my phone.
Also you could try these gapps, which I use myself, it will even give you video chat on google talk ;-)
https://sourceforge.net/projects/lewa/files/gapps-gb-20110828-newtalk-signed.zip/download
kwezi said:
Loving this ROM thanks uploader
I have an issue with gapps. When I access some apps on GPlay i get a not compatible error have flashed the latest gapps/wipe cache etc but the problem still persists. What could be the problem?
Thanks
Click to expand...
Click to collapse

[Xolo Q3000] [ROM] [4.4.2_KitKat] MIUI6_v5.7.9 with Updates upto 5.7.23

I’m presenting my 1st ported ROM MIUI6_v5.7.9 for Xolo Q3000, with special thanks to:
1)Xolo for the awesome phone at affordable price,
2)MIUI for the wonderful rom,
3)Turkdevs.com & SmiLeToLiFe for the ported rom,
4)Dr. Avinash for MIUI6_Boot Logo and TWRP rev2 recovery,
5)Of course, me for Repartitioning Xolo Q3000. But, I need not to Thank myself as I know U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but your work is all credited to you, so, please forgive me.
Pre-requisites:
1)Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2)Before proceeding, Back up your Current Rom (Failsafe).
3)/System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4)SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1)Put the downloaded MiuiV6_5.7.9_By_SmiLeToLiFe.zip in sd card.
2)Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3)Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4)Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5)Install MiuiV6_5.7.9_By_SmiLeToLiFe.zip
6)Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7)Immediately, Install the MIUI6_5.7.9_Patch.zip
8)Again, Wipe Cache & Dalvik Cache.
9)Reboot System.
10)1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo. If you stuck at Boot Logo, then go to recovery & flash the rom again).
WARNING:I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1)Everything from MIUI working fine
2)Latest Google Keybord
3)WSM Tools Pre-Installed
4)SuperUser & BusyBox installed
5)MX Player as default media player
6)For full changelog, visit: http://en.miui.com/thread-130282-1-1.html
Bugs:
No major bugs, till now, few minor bugs are as follows:
1)Some of the Icons missing (I Guess, it needs Custom Kernel!!).
2)Dialer Crashes for USSD commands.
3)Report, if you found any.
Download Links:
1) MIUI6_5.7.9_Rom
2) MIUI6_5.7.9_Patch
3) Audio Settings Fix
Note: For Engineer Mode, dial *#*#3646633#*#*,
All the Best, Guys:good::good::good::good::good:
Screenshots:
1) MIUI6_5.8.6
2) MIUI6_5.7.9
Updates:
Note: Don't wipe cache & Dalvik Cache before, but don't forget to wipe them after flashing updates.
=> MIUI6_5.7.9 To 5.7.16_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscTjNUQUZoaElGeUU/view?usp=docslist_api
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
Full changelog at: http://en.miui.com/thread-133527-1-1.html
=> MIUI6_5.7.16 To 5.7.23_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscekNpRVVfMkpPeVE/view?usp=docslist_api
Full changelog at: http://en.miui.com/thread-135972-1-1.html
downloading
will post review by tomorrow
sachin.r.fulzele said:
Updates:
=> MIUI6_5.7.9 To 5.7.16_Update
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
2) Full changelog at:
=> MIUI6_5.7.16 To 5.7.23_Update
Full changelog at:
Click to expand...
Click to collapse
Bro any patch for dailer patch...
mujaid714 said:
Bro any patch for dailer patch...
Click to expand...
Click to collapse
Updates are uploading, It has been solved. Wait for link.....
Quick update
From is working fine
Smooth like butter
Titanium backup working fine
WiFi isn't working for me
Have tried tethering from other mobile and WiFi dongle
Will try a proper WiFi router tomorrow morning.
Update
It was my problem
Didn't do a proper flash
Everything working fine now
Awesome performance so far
Sent from my HM NOTE 1W using XDA Free mobile app
Hats off for ur work..nice and lagfree rom...wifi working for me...found a bug...in sound can't open audio setting got fc for setting. And only thing I miss the keypad notification light for msg and miss call..any way to get that..and how much is the camera pixel..
Maybe I should reinstall the ROM
Reinstalled and everything working like a charm
Sent from my HM NOTE 1W using XDA Free mobile app
Link for MIUI6_5.7.9 To 5.7.16_Update is updated
mujaid714 said:
Hats off for ur work..nice and lagfree rom...wifi working for me...found a bug...in sound can't open audio setting got fc for setting. And only thing I miss the keypad notification light for msg and miss call..any way to get that..and how much is the camera pixel..
Click to expand...
Click to collapse
Notification lights are limited to LED lights, to enhance battery life.
Camera capacity was not shown in megapixels, but MIUI utilizes full camera capacity (supported by Hardware).
Perfect port bro, everything working fine, rom is smooth n stable, found some bugs like fc settings when opening audio settings
awesome performance
thanks @sachin.r.fulzele for the awsum rom...smooth & very stable
wifi & mobile network work well
otg works well
dialer problem solve with MIUI6_5.7.9 To 5.7.16_Update
great sound
all games run very well(including high end)...no lag
some apps icons are missing
one more problem which i face (in other way this is not problem)...after update to 5.7.16 ....in settings it shows 5.7.9
Fonts working on this rom?
aaayush_singh said:
Fonts working on this rom?
Click to expand...
Click to collapse
Yup..i tried one or two...got error unfortunatly theme closed...
I m getting somekind updates fro miui. Can it b updated...
mujaid714 said:
I m getting somekind updates fro miui. Can it b updated...
Click to expand...
Click to collapse
no dont do that
our phone isnt officially supported so those updates will get u into bootloop
sachin.r.fulzele said:
Updates:
Note: Wipe cache & Dalvik Cache before & after flashing updates.
=> MIUI6_5.7.9 To 5.7.16_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscTjNUQUZoaElGeUU/view?usp=docslist_api
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
2) Full changelog at: http://en.miui.com/thread-133527-1-1.html
=> MIUI6_5.7.16 To 5.7.23_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscekNpRVVfMkpPeVE/view?usp=docslist_api
Full changelog at: http://en.miui.com/thread-135972-1-1.html
Click to expand...
Click to collapse
plz upload the 5.7.23 update
rohitsinghpu said:
plz upload the 5.7.23 update
Click to expand...
Click to collapse
Testing in progress......
rohitsinghpu said:
thanks @sachin.r.fulzele
some apps icons are missing
one more problem which i face (in other way this is not problem)...after update to 5.7.16 ....in settings it shows 5.7.9
Click to expand...
Click to collapse
I guess!! you haven't wiped cache & Dalvik Cache before/after installing update. So, it's showing same version no. even after update.
Missing icons are due to lacunae in stock kernel( I've tried a lot, but Needs custom kernel)

[ROM] CyanoBiz - CM-13.0 - Doze enable - n7100 / Galaxy Notes2

/!\Thread will be moved in Android dev section by moderator..../!\
Hi!
I share you my own build based on Ivan andI9300's works with my works.
This ROM will NOT work if:
[fix in next build] - you have partitonned your system (less of 1GB of free espace)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's news in this ROM:
-Full CM-13
-RIL code's based on I9300 Github
-Apps dex-preoptimization (speed up first boot)
-Brightness setup updated
-Swap activated (kernel)
-IO SHEDULERs added (kernel)
-DOZE Activated and working - (see screenshots)
-No bugs with auto rot.
-No bugs with camera
-No bug with BT (thanks P.A.N. from i9305 github)
I let you try it and report. This build will be updated every weeks.
How install it:
-Just install it over another CM13 Roms without wipe.
-You came from CM-12.1, you need to wipe all datas (system-data-cache-dalvik).
If you wipe all datas, after install GApp you may will have an error with AOSP Keyboard (crash):
How install GApps:
-Install the Rom, and directly after, install Aroma GApp
-Select all that you want WITH Google Keyboard. After have selected your apps, choose to delete KeyboardStock!!.
-Don't install Google Camera, it dooesn't worked!
-Install GApps, wipe cache and reboot
Or you can install the apk that i share, and deactivate Old Google keyboard
Then please DL Android keyboard apk, and save your current ROM before updated!
How DOZE works:
-download from xda doze setting editor or naptime from PlayStore
-Edit times to force Doze to be activated more fast (see my screenshots, i use this timers)
To try Doze you must let your phone, it will not work of you have your phone in a pocket on a car/train etc etc. If a sensors detect a movement, the phone becomes ACTIVE.
You can log Doze states by commands from adb:
Code:
Dumpsys battery unplug
Dumpsys deviceidle force
Dumpsys deviceidle step
Build Download:
https://mega.nz/#!7xVnnSAZ!fUhHr2HFHTLpHVdv08lsul9KQArBFp2s9lqjwp6twWk
New build - 14-02-2016:
https://mega.nz/#!jwMw1KzK!1DhjFdaLkbbCIExSkKpwbKQPUa4_bHkCtuhP3wuzqDs
Sources:
https://github.com/bizcuite/
Thanks to:
-Ivan Meler
-Cyanogen
-All users who helps me
Bizcuite
reserved for future
Thank you very much for supporting the machine we suffer with the device a little support
So this is like a mod? What CM13 ROMs were tested?
andrewKode said:
So this is like a mod? What CM13 ROMs were tested?
Click to expand...
Click to collapse
No, just a different way to code. I haven't say nothing about mod/others.
I know that many users had pb with Ivan's build (auto rot./data etc...). If i can offer another way, it's a good thing.
For information, i had NEVER installed Ivan's build, only mine, i don't know if you will have sames pb.
My Rom works since 1 mounth on my phone.
Bizcuite
Sent from my GT-N7100 using XDA Free mobile app
bizcuite said:
No, just a different way to code. I haven't say nothing about mod/others.
I know that many users had pb with Ivan's build (auto rot./data etc...). If i can offer another way, it's a good thing.
For information, i had NEVER installed Ivan's build, only mine, i don't know if you will have sames pb.
My Rom works since 1 mounth on my phone.
Bizcuite
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
M8 can you work on an stock aosp rom instead of cm please. Just a request. BTW gr8 rom testing now.
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Lynexius said:
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Click to expand...
Click to collapse
did you wipe internal storage as well? put youe rom files on an extenal sd , wipe everything and try again. Install gaaps after flashing rom.
simplyme2908 said:
M8 can you work on an stock aosp rom instead of cm please. Just a request. BTW gr8 rom testing now.
Click to expand...
Click to collapse
I can, i can
I need more space on my hard drive!!
Lynexius said:
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Click to expand...
Click to collapse
Don't install Agni kernel, if the dev. doesn't have activated Swap, you may have a bootloop (fstab file error, partitions not mount).
simplyme2908 said:
did you wipe internal storage as well? put youe rom files on an extenal sd , wipe everything and try again. Install gaaps after flashing rom.
Click to expand...
Click to collapse
I have updated the "how to" to install GApp, don't reboot immediatly, install Aroma GApps (custom install) with KeyboardGoogle and force remove AOSP Keyboard.
I have tried twice the method.
Bizcuite
bizcuite said:
I can, i can
I need more space on my hard drive!!
Don't install Agni kernel, if the dev. doesn't have activated Swap, you may have a bootloop (fstab file error, partitions not mount).
I have updated the "how to" to install GApp, don't reboot immediatly, install Aroma GApps (custom install) with KeyboardGoogle and force remove AOSP Keyboard.
I have tried twice the method.
Bizcuite
Click to expand...
Click to collapse
Use cloud storage, I really want a stock aosp rom wish I could do something.
first of all, Thanks for this rom, @bizcuite !
so far so good aside from 1 weird issue with external sd card. ín storage settings it is displayed as "portable-storage" and card was renaed to "mac_create_". while using titanium backup to restore my apps i had to guess the folder name related to the external storage. after i found this and choose my backup folder i get the message "folder not writable", although i can still use the folder to acess my apps and restore them.
i'm concernd about this. how do we fiz this?
thanks a lot!
J4mps said:
first of all, Thanks for this rom, @bizcuite !
so far so good aside from 1 weird issue with external sd card. ín storage settings it is displayed as "portable-storage" and card was renaed to "mac_create_". while using titanium backup to restore my apps i had to guess the folder name related to the external storage. after i found this and choose my backup folder i get the message "folder not writable", although i can still use the folder to acess my apps and restore them.
i'm concernd about this. how do we fiz this?
thanks a lot!
Click to expand...
Click to collapse
Move your backup to internal storage and then restore. I didn't let titanium mess.with my sd card. Because many where reporting, loss of data and ****.
Hello! i follow your guide, but i have the same result :S Now i will do a list what i do when install the rom:
I use TWRP 3.0.0-0
1) Wipe all partitions (dalvik/art - cache - system - internal memory)
2) I install the rom zip.
3) I install Aroma Gapps directly and in custom setting i also install google keyboard and removing old aosp keyboard)
4) Finally i reboot, but only time system go in bootloop animation (i try it for 10 minutes)
i don' t use agni kernel
My rom base firmware is XXUFND3
Thanks for help me all
Wow, this ROM rocks, very stable, definitely a daily driver for me. Ok, this is what I did for install:
1) Use TWRP 3.0 to wipe the phone completely (internal storage included)... TWICE
2) Install the ROM via TWRP.
3) Install OpenGAPPS via AROMA installer, added the google keyboard inside the installation. - Make sure you select 'forceclean'
4) Boot, AOSP keyboard error, went into settings, and selected the google keyboard as default.
5) Flashed SuperSU zip file via TWRP
6) Installed BusyBox via Google Play
7) Flashed Xposed by romracer
8) Installed Xposed istaller
9) Installed 3C toolbox Pro from Google Pay
10) Proceed to delete the AOSP keybord and other useless items from system using 3C Toolbox Pro.
11) Installed SPenCommand.
12) Base system is now ready for loading everything else from the Play Store.
Only issue I have so far is that I cannot move programs into the system partition using either Titanium or 3C Toolbox. Other than that everything works fine.
One more thing, Google Camera works fine for me.
Lynexius said:
Hello! i follow your guide, but i have the same result :S Now i will do a list what i do when install the rom:
I use TWRP 3.0.0-0
1) Wipe all partitions (dalvik/art - cache - system - internal memory)
2) I install the rom zip.
3) I install Aroma Gapps directly and in custom setting i also install google keyboard and removing old aosp keyboard)
4) Finally i reboot, but only time system go in bootloop animation (i try it for 10 minutes)
i don' t use agni kernel
My rom base firmware is XXUFND3
Thanks for help me all
Click to expand...
Click to collapse
Hi,
Thanks to try the Rom and reports!
Have you tried to install gapps with the minimum? Just Android keyboard and force to uninstall stock keyboard?
Don't format external storage. It's not necessary.
FYI: i have begun to work on aosp...
Bizcuite
Hello everybody
Bizcuite yes i install minimum gapps + keyboard, play games and youtube. And yes i tick force uninstall.
No problem, i wait a future update of this rom :good:
Regards
Lynexius said:
Hello everybody
Bizcuite yes i install minimum gapps + keyboard, play games and youtube. And yes i tick force uninstall.
No problem, i wait a future update of this rom :good:
Regards
Click to expand...
Click to collapse
Have you try to install only the Rom without gapp, to see if it boots correctly and after install gapps?
Bizcuite
Yes bizcuite i test it also without gapps, I don't know why it dosn't work just me xD
let's see if someone else has the same problem.
Install philz recovery mount all partitions and then wipe preload manually or just tap clean to install new rom. Then flash the rom.
No many reports or complaints from users.
Is it a good news? No download of the ROM or no bugs?
Bizcuite

Categories

Resources