Related
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
Installation:
You need to have installed Clockworkmod recovery!
Boot into recovery by pressing Call+Volume Up+Power.
After that install the ROM from the SD card using ClockworkMod Recovery!
+If you want Google apps then install this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
About Me: I have been cooking ROMs since 2011 and my first developed ROMs for Huawei U8500 were CyanogenMod ROMs.
Known issues*
1. OpenMax
2. FM Radio
3. Camera (video recording)
Changes
CyanogenMod 9.0.0 Nightly 2012.06.18
Updated CyanogenMod source!
Added tweaks!
Fixed D-Pad!
CyanogenMod 9.0.0 Nightly 2012.06.13
Updated CyanogenMod source
A lot of bug fixes
CyanogenMod 9
Initial release
Current release
CyanogenMod 9.0.0 Nightly 2012.06.18
Previous releases
CyanogenMod 9.0.0 Nightly 2012.06.13
CyanogenMod 9
Ask me if you need to!
Market
And one of the bugs is Market get's error
gapps
Plz give me working gapps link
Thanks for your development
mohithimu said:
Plz give me working gapps link
Thanks for your development
Click to expand...
Click to collapse
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
gyilki said:
Install the Rom, then wipe data and cache... and market will work...
2 bugs still exist:
- no keylock (I installed Ripplelock)
- no gallery
Click to expand...
Click to collapse
on my phone after wipe market is still don't working :\ what gaaps you are using? if you can share link
question: can you turn off the trackpad mouse pointer, to work as 2.3.7
galery not working properly
otherwise a good rom, I like it
Pointer remover!
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Update Not working so you need to put those files in /system folder by yourself!
Pointer will be fixed in next update!
Can't impossible get Gapps to work. Have tried evrything (I think)!
Have tried a couple other Gapps then latest one given in this thread.
Have tried installing CM9 and Gapps a couple of times, with reboot and cleaning cache etc in diffrent orders... without luck.
Latest I tried clearing cache, data, dalvik, etc.
Installed CM9.
Installed Gapps (given above in thread)
Reboot.
Evrything seems to work, but no icons/apps appear... >_<
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Install it from ClockworkMod recovery!
Click to expand...
Click to collapse
not working:-(
great job
klavsanson said:
This update removes pointer but do not worry the D-Pad will work as in Android 2.3.7!
Click to expand...
Click to collapse
thanks, its work for me!!
when i want install new release recovery show me that installation aborted
Now I've done some more testing... and done the installation over and over a couple of times
Theese are my conclusions:
* Installation of Gapps is partially working!
From one installation to another, diffrent apps and function is installed (or working) on the phone.
Theese functions I've found (so far) that vary from time to time:
* Gmail
* Market
* Screen lock
* Installation guide program when new user/clean installation
tested
After a while I managed to set up it to work good
1.wipe data factory reset, dalvik cache...everything
2.flash rom
3.wait for the phone to start
4.wipe again,start the phone
5.flash gpapps
Instead of stock gallery use quick pick.
Little bit slow when entering menu (probably becouse of stock zoom effect).
market working,camera working, synced account without problems
Great job!
I installed CyanogenMod 9.0.0 Nightly 2012.06.18
My phone just flies.
Battery lasts a long time
RAM size 140 MB (it is very good)
Less:
*1.The graphics system sometimes produces errors
*2.File Manager does not play music
Otherwise, I like ...
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
FIX!
Zbajchou said:
when i want install new release recovery show me that installation aborted
Click to expand...
Click to collapse
pedjakis said:
i instaled this rom, and i am very satisfied, i like it very much, i want to use it as my prime rom, but, i have problem, landscape mod dosent work, nor in messages nor in menu. atlist in messages i must have landscape mod. can u fox this???
sory for my bad english
Click to expand...
Click to collapse
Zbajchou, I have fixed the update so download it again!
pedjakis, install Attached File!
How could we install google talk on this rom?
Graphics bug.Dunno what to do.Very annoying.
EDIT:Factory reset helped. Very happy now.Awesome ROM!
EDIT2:No sound when sms comes.Is there any fix?
Great Job!
Hi Klavsanson,
I've installed the latest version and It's working almost everything, great
I don't know if it's my phone, but I can't neither use USB nor wifi tethering. This is important for my job.
I've previously wiped data, cache, dalvik
Gallery has an extrange behaviour as is not possible to see correctly anything-
Thanks for your job
Just out of curiosity
how come that gapps are so massive in size 80mb ?compared to cm7 only 9mb
This ROM is built for Vodafone 858/Huawei U8160 - It may work on other phones, I don't care.
ROOT + RECOVERY INSTALL HELP HERE...(my own method)
After I relese Omicrom v1.1, if after 24'hours I don't get 100 downloads in total, I pass this project to anyone else who has time developping. I am working for a cause and I need money donated...
The idea of the ROM is very simple:
Let's say you get bored of stock and root you phone and download a 100 mb JellyBean ROM, but you find it useless and download another 100 mb ICS ROM. You get bored of it and download, let's say MiUI. And so on. A lot of wasted time. I decided to make a package of ROMs so, in case you get bored of one, you simply reboot in recovery and flash the other one. But,my package isn't like downloading two .zips and putting them on SDcard, it's more than that. I took the best ROMs out there, tweaked them for more performance and added some options to flash along the ROMs (for the first release just launchers, more to come)
First off, I want to thanks the people/developers who made this possible:
-Brokn.Down for his CM7 base and for helping me out with the updater-script;
-ylynka, my friend, for testing the ROM as I don't have the phone avalaible;
-ReloadedICS for an awesome app;
-xda for hosting the thread;
What you get with the package:
-ultimate CM7 (JellyBean like);
-lite and lightning fast CM9;
-AROMA Installer (not many options though in the first release);
-Reloaded app for CM9 only (is still under testing, so please report any bug caused by this).
What is AROMA?
Find out more here.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Why trusting my ROM?
It's hard for me, as its developer, to tell you because I can only say good things. Take 10 minutes of your life to test it and tell me why you trust it!
CM7 features:
~Hightly optimized rom for play games and multitask
~Beats Audio™ By Dr. Dre (ported from HTC One X+)
~Holo Launcher Optimized
~99% LDPI resized
~Opera Mini included for fast web browsing
~QuickPic instead of stock cm7 gallery
~Notes, Stopwatch, and other essential apps included
~U8160/80 device parts settings modded
CM7 not working:
-GPU (as the device has integrated GPU in CPU) - shouldn't be a problem
CM9 features:
2D acceleration (using copybit)
Audio
Bluetooth
Bluetooth tethering (?)
Camera - preview, picture taking, barcode scanner mode
GPS
Lights
Sensors
Telephony - calling, messaging, mobiledata
Touchscreen (multitouch)
USB Mass Storage
USB tethering
Wi-Fi
Wi-Fi Hotspot
Swap
zRam (i.e. compcache)
CM9 not working:
Camcorder mode
OMX encoders/decoders (e.g. Youtube HQ video playback)
Bluetooth - when enabled, Bluetooth will cause the phone to constantly hold
a wake lock, preventing the phone from sleeping. Turn off Bluetooth when you don't need it.
FM Radio - no CM9 radio app yet exists, but libaudio has support included. This means that some third-party apps (e.g. Spirit FM) can work.
Gallery - after installing Google Apps, you will have two different Gallery apps installed. We need to use the legacy Gallery app, because the newer Gallery2 (and Google's version, GoogleGallery) requires OpenGL extensions that our phone cannot support. You are free to delete one of the duplicate applications from /system/app using CMFileManager (in root mode).
Trebuchet - after first installation, the default background wallpaper may be misaligned, leaving some black banding at the sides. This only occurs on first start, and the problem will correct itself on the next reboot / relaunch of Trebuchet.
USB tethering - the phone will freeze if you remove the cable during tethering. Make sure to disable tethering via the menu option manually when you want to remove the phone from the computer.
Aroma Options:
For CM7 - launchers only (more to come)
For CM9 - launchers, mini gapps and ReloadedICS (if you do not want to participate in telling me if app works or not and want a stable system, don't flash this while it is beta)
Downloads: v1 - http://d-h.st/mzq
v1.1 - http://d-h.st/TIt
Mount /system before installing anything!
After you install CM9 it may not boot for some reasons. Try flashing this fix, then reboot. If it still does not work, flash this fix and reboot.
Upcoming:
None.
Code:
Changelog:
Inside AROMA!
App packages: None yet!
Code:
Known bugs for package:
The system chooser displays no text. (unknown fix)
Can't make ICS boot from AROMA. (flash ICS fix)
Ideas:
I like hearing opinions from users, so if you have any idea how to make the systems or AROMA better please comment.
Donations:
If you want to keep this project alive or you want to buy me a beer, donate here in EURO or here in DOLLARS.
---Installing ChainFire3D Gaming MOD---
0. Before starting, you should know that I am not responsible for any damage of your phone. Before this process, take 10 minutes to backup the ROM in case the process goes wrong. This is still under testing, report any bugs, etc.
1.Download modded apk and plug-ins (mediafire) and unzip it in a folder on the root of SD-Card
2.Download Chainfire3D from PlayStore (the free version, you can support devs later)
3.Open Chainfire3D and install the driver, then reboot
4.After reboot, uninstall Chainfire3D.
5.Install modded apk provided, then open it (SU rights needed)
6.Then close Chainfire3D and open it again from PlayStore
7.Close it and quick reboot (with ROM Toolbox maybe)
8.After quick reboot you must reboot (normal)! After reboot you can't open Chainfire3D (that's normal) that's why you must reinstall Chainfire3D (modded apk)! Then you open Chainfire3D and install the plug-ins. After this you must fix the Market Settings then you must reboot
9. That’s it. You must tweak each game to work as you wish: smooth and HD.
10. Support CF3D devs!
INSTALLING V6 SUPERCHARGER BY ZEPPELINROX
1. Download this script.
2. Flash busybox found here.
3. Install Script Manager. (search on Google PlayStore)
4. Load script into Script Manager (Run As Root - the skull and crossbones icon which turns green when selected)
5. Follow instructions/user prompts & select what you want
6. Reboot & Enjoy "fast" and "multitasking".
7. Press Thanks at zeppelinrox page.
Enjoy my ROM!
How to install?
Sent from my Vodafone 858 using xda premium
polac said:
How to install?
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
Flash the Omicrom v1.zip like any zip.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
VyrruS said:
Flash the Omicrom v1.zip like any zip.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Click to expand...
Click to collapse
I know how to make the touch work in our devices, i'll send you the fix via fb VirruS
When I try to install the fix it says installation aborted why
Sent from my Vodafone 858 using xda premium
polac said:
When I try to install the fix it says installation aborted why
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
I have tested it now and it goes into aroma. Try downloading it again, it may be a bad download.
What we need to wipe and mount before flash?
polac said:
What we need to wipe and mount before flash?
Click to expand...
Click to collapse
The installer mounts and wipes everything you need!
Download again and it continous saying installation aborted
polac said:
Download again and it continous saying installation aborted
Click to expand...
Click to collapse
Tell me how you install it
With clockworkrevovery
i applied the fixes but now it bootloops and then boots into recovery
Sent from my U8160 using xda premium
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
today i will upload a vid showing everything i did and what happens
Sent from my U8160 using xda premium
here is the video
https://www.youtube.com/watch?v=RQI3VQw0y74&feature=youtube_gdata_player
Sent from my U8160 using xda premium
pikakai said:
here is the video
https://www.youtube.com/watch?v=RQI3VQw0y74&feature=youtube_gdata_player
Sent from my U8160 using xda premium
Click to expand...
Click to collapse
Ok, I get it. The bootloop is caused by aroma which does not support the command to retouch the binaries. So I created the first fix with this command and the second fix to reset te build.prop, but as I can see it does not work. My friend told me that he booted ICS from aroma so I will ask him how he did it.
Anyway, tomorrow, 24th March, I will release a new version, with more options than release 1. So, just use CM7 till then. I will try to fix the bug!
Thanks for the feedback!
VyrruS said:
Ok, I get it. The bootloop is caused by aroma which does not support the command to retouch the binaries. So I created the first fix with this command and the second fix to reset te build.prop, but as I can see it does not work. My friend told me that he booted ICS from aroma so I will ask him how he did it.
Anyway, tomorrow, 24th March, I will release a new version, with more options than release 1. So, just use CM7 till then. I will try to fix the bug!
Thanks for the feedback!
Click to expand...
Click to collapse
no problem and good luck
Sent from my U8160 using xda premium
Any news?
CM9 can't boot with new version too
Sent from my U8160 using xda premium
Which is the best V6 configurations for U8160?
VyrruS said:
This ROM is built for Vodafone 858/Huawei U8160 - It may work on other phones, I don't care.
ROOT + RECOVERY INSTALL HELP HERE...(my own method)
After I relese Omicrom v1.1, if after 24'hours I don't get 100 downloads in total, I pass this project to anyone else who has time developping. I am working for a cause and I need money donated...
The idea of the ROM is very simple:
Let's say you get bored of stock and root you phone and download a 100 mb JellyBean ROM, but you find it useless and download another 100 mb ICS ROM. You get bored of it and download, let's say MiUI. And so on. A lot of wasted time. I decided to make a package of ROMs so, in case you get bored of one, you simply reboot in recovery and flash the other one. But,my package isn't like downloading two .zips and putting them on SDcard, it's more than that. I took the best ROMs out there, tweaked them for more performance and added some options to flash along the ROMs (for the first release just launchers, more to come)
First off, I want to thanks the people/developers who made this possible:
-Brokn.Down for his CM7 base and for helping me out with the updater-script;
-ylynka, my friend, for testing the ROM as I don't have the phone avalaible;
-ReloadedICS for an awesome app;
-xda for hosting the thread;
What you get with the package:
-ultimate CM7 (JellyBean like);
-lite and lightning fast CM9;
-AROMA Installer (not many options though in the first release);
-Reloaded app for CM9 only (is still under testing, so please report any bug caused by this).
What is AROMA?
Find out more here.
AROMA may or may not work with our devices' touchscreen. Do not panic. Use the volume keys to navigate and the power button to select.
Why trusting my ROM?
It's hard for me, as its developer, to tell you because I can only say good things. Take 10 minutes of your life to test it and tell me why you trust it!
CM7 features:
~Hightly optimized rom for play games and multitask
~Beats Audio™ By Dr. Dre (ported from HTC One X+)
~Holo Launcher Optimized
~99% LDPI resized
~Opera Mini included for fast web browsing
~QuickPic instead of stock cm7 gallery
~Notes, Stopwatch, and other essential apps included
~U8160/80 device parts settings modded
CM7 not working:
-GPU (as the device has integrated GPU in CPU) - shouldn't be a problem
CM9 features:
2D acceleration (using copybit)
Audio
Bluetooth
Bluetooth tethering (?)
Camera - preview, picture taking, barcode scanner mode
GPS
Lights
Sensors
Telephony - calling, messaging, mobiledata
Touchscreen (multitouch)
USB Mass Storage
USB tethering
Wi-Fi
Wi-Fi Hotspot
Swap
zRam (i.e. compcache)
CM9 not working:
Camcorder mode
OMX encoders/decoders (e.g. Youtube HQ video playback)
Bluetooth - when enabled, Bluetooth will cause the phone to constantly hold
a wake lock, preventing the phone from sleeping. Turn off Bluetooth when you don't need it.
FM Radio - no CM9 radio app yet exists, but libaudio has support included. This means that some third-party apps (e.g. Spirit FM) can work.
Gallery - after installing Google Apps, you will have two different Gallery apps installed. We need to use the legacy Gallery app, because the newer Gallery2 (and Google's version, GoogleGallery) requires OpenGL extensions that our phone cannot support. You are free to delete one of the duplicate applications from /system/app using CMFileManager (in root mode).
Trebuchet - after first installation, the default background wallpaper may be misaligned, leaving some black banding at the sides. This only occurs on first start, and the problem will correct itself on the next reboot / relaunch of Trebuchet.
USB tethering - the phone will freeze if you remove the cable during tethering. Make sure to disable tethering via the menu option manually when you want to remove the phone from the computer.
Aroma Options:
For CM7 - launchers only (more to come)
For CM9 - launchers, mini gapps and ReloadedICS (if you do not want to participate in telling me if app works or not and want a stable system, don't flash this while it is beta)
Downloads: v1 - http://d-h.st/mzq
v1.1 - http://d-h.st/TIt
Mount /system before installing anything!
After you install CM9 it may not boot for some reasons. Try flashing this fix, then reboot. If it still does not work, flash this fix and reboot.
Upcoming:
None.
Code:
Changelog:
Inside AROMA!
App packages: None yet!
Code:
Known bugs for package:
The system chooser displays no text. (unknown fix)
Can't make ICS boot from AROMA. (flash ICS fix)
Ideas:
I like hearing opinions from users, so if you have any idea how to make the systems or AROMA better please comment.
Donations:
If you want to keep this project alive or you want to buy me a beer, donate here in EURO or here in DOLLARS.
---Installing ChainFire3D Gaming MOD---
0. Before starting, you should know that I am not responsible for any damage of your phone. Before this process, take 10 minutes to backup the ROM in case the process goes wrong. This is still under testing, report any bugs, etc.
1.Download modded apk and plug-ins (mediafire) and unzip it in a folder on the root of SD-Card
2.Download Chainfire3D from PlayStore (the free version, you can support devs later)
3.Open Chainfire3D and install the driver, then reboot
4.After reboot, uninstall Chainfire3D.
5.Install modded apk provided, then open it (SU rights needed)
6.Then close Chainfire3D and open it again from PlayStore
7.Close it and quick reboot (with ROM Toolbox maybe)
8.After quick reboot you must reboot (normal)! After reboot you can't open Chainfire3D (that's normal) that's why you must reinstall Chainfire3D (modded apk)! Then you open Chainfire3D and install the plug-ins. After this you must fix the Market Settings then you must reboot
9. That’s it. You must tweak each game to work as you wish: smooth and HD.
10. Support CF3D devs!
INSTALLING V6 SUPERCHARGER BY ZEPPELINROX
1. Download this script.
2. Flash busybox found here.
3. Install Script Manager. (search on Google PlayStore)
4. Load script into Script Manager (Run As Root - the skull and crossbones icon which turns green when selected)
5. Follow instructions/user prompts & select what you want
6. Reboot & Enjoy "fast" and "multitasking".
7. Press Thanks at zeppelinrox page.
Enjoy my ROM!
Click to expand...
Click to collapse
any news?
Sent from my U8160 using xda premium
is development on this rom dead or something?
Sent from my U8160 using xda premium
pikakai said:
is development on this rom dead or something?
Sent from my U8160 using xda premium
Click to expand...
Click to collapse
I haven't got ICS yet, and I haven't got any more ideas what to put inside AROMA..if you give me ideas, I will mare a 1.3 version. Moreover, if anyone could fix ICS, I'd be grateful.
*** Disclaimer
Flashing a ROM is an inherently risky operation. You alone are responsible for any damages, data loss, or dead kittens caused by flashing this ROM. Nexus devices are notoriously hard to brick, but should you do so by either your own error, omission, or a by flaw in this ROM you have been forewarned.
Introduction
Flo++ is an AOSP Kitkat (KOT49H) based ROM with the stock kernel aimed mostly at minimalists that want a clean base installation with basic power user functionality. GAPPS are not installed to allow you to flash flash the GAPPS package of your choice. I recommend going with one of the PA GAPPS packages.
Images
See attachments below
Features
* Busybox compiled into ROM (/system/bin)
* Pre-Rooted
* Supersu 1.94
* QCOMM Dalvik and Bionic optimizations (This ROM is NOT compatible with ART)
* QCOMM Adreno Graphics Usermode driver update (20140331 version) Revert file is available here
* Android Terminal Emulator (as system app)
* Titanium Backup (as user app)
ToDo:
* Add init.d support
* Edit Framework to add advanced power menu options
* Add Developer and Power user appropriate tools
* Add File Manager
* More stuff based on input and testing
* Add option to install CWM (For users without Custom recovery)
Installation instructions
Requirements:
* Nexus 7 (2013) wifi version (aka "Flo") with unlocked bootloader
* Custom recovery (TWRP or CWM recommended, PhilZ Touch highly recommended)
Instructions:
* Perform a nandroid backup and store it on your PC, this is just prudent practice before installing any ROM
* Copy flo++[version].zip to /sdcard/
* Reboot to recovery
* Perform a Factory Reset or if using PhilZ, "Wipe Data/Factory Reset" > "Clean to Install a new ROM"
* Install Flo++
* Install GAPPS package (optional) if desired.
* Reboot and enjoy
Download
Download from AFH:
Flo++0.4.2.zip
MD5: 45026d4fb49d02eaeb88cf2a49cfb3e3
Flo++0.4.1a.zip
MD5: 5f0daca93ae6345917f39c743552c802
Older versions
Flo++0.3.zip
MD5: 3eb4c88a7859c4508934642878a04342
Flo++0.2.8-signed.zip
MD5: 6f13b2f8a5f30cfdd202b154c84135db
Changelog
flo++ changelog
v0.4.2 [21040406]: added updated Qcomm Adreno 320 GPU drivers. Revert file available here
v0.4.1a [20140405]: Recompiled with latest version of busybox and added Android Terminal Emulator, TitaniumBackup 6.1.5.4. Updated Supersu to v1.94 - Temporarily discontinued use of Aroma Installer.
v0.3.0 [21040314]: Added Basic Aroma Installer, Qualcomm Bionic and Dalvik optimizations. This ROM is not compatible with ART
v0.2.8 [20140306]: Stock AOSP Kernel, busybox (compiled into ROM), Rooted- Supersu 1.93,Rom is signed and can be flashed using Stock Recovery IF factory reset has been done
v0.2.1 : 0.2.7[20140302-20140305]: Internal testing not released
v0.1 [20140228]: Clean "mostly stock" AOSP build, userdebug, stock kernel, Korean and japanese input methods removed
FAQ
Q. Can I install this without a custom recovery?
A. In theory, Yes. Just do a factory reset and it *should* work. You do have backups , Right?
As of v0.3 you must use a custom recovery (until I resolve the signing issue using AROMA)
Q. Why doesn't GPS work?
A. Short answer: Actually it does (confirmed with GPS test), you need to install a GPS app or flash GAPPS with Google Maps in order to actually "use" GPS. Longer answer here.
Q. Backup and restore doesn't work. whats wrong?
A. Backup and restore functionality comes with GAPPS or a special transport service written for a storage service. Since I do not intend to host anyone's backups there is a fix posted here. This issue will be fixed before the ROM is released from Beta status (version 1.0).
Thanks To/Credits
Qualcomm Developer Network, for Adreno Drivers - https://developer.qualcomm.com/
Titanium Track, For Titanium Backup - http://www.matrixrewriter.com/android/
Jack Palevich (jackpal) for Android Terminal Emulator - https://github.com/jackpal/Android-Terminal-Emulator
chainfire, for SuperSU - http://download.chainfire.eu/supersu
Gnurou, for busybox - https://github.com/Gnurou/busybox-android
Google, for AOSP source and kernel - https://android.googlesource.com
amarullz, for AROMA Installer - http://forum.xda-developers.com/showthread.php?t=1461712
kszaq and jphilippon - for making the Bionic and Dalvik optimizations readily available on XDA
Code Aurora Forum, for the Bionic optimization patch
Motorolla, Dalvik library was extracted from Moto X 4.4. ROM.
Known Bugs /Issues
[20140408] Backup and reset do not work out of the box. - workaround here . This will be fixed in next release, but you can enable the function by following the directions in the post.
[20140314] Aroma signature breaks ROM signature. Will fix this when I get a chance, but until then use unsigned zip.
[20149316] It has been reported that GPS is not functional on v0.3 will investigate the report and update as soon as possibile
GPS works (confirmed with GPS test) For user functionality install a third party GPS Nav app or flash PA mico modular GAPPS and install GMaps.
reserved
i'll give it a shot!
What toolchain is this built with?
Sent from my Nexus 7 using xda app-developers app
PwnCakes193 said:
What toolchain is this built with?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
edited:
Whoops I misread your question. This is built GNU make 3.81 x86_64-pc-linux-gnu on Debian Jessie/SID using the standard AOSP /prebuilts. I have not decided whether or not to use Linaro.
Right now I'm working on getting the Aroma installer configured. The next version (probably tonight or tomorrow) will include the qc dalvik and bionic optimizations and a couple more tweaks.
flyboy1100 said:
i'll give it a shot!
Click to expand...
Click to collapse
This ROM is still a work in progress but please feel free to let me know if you have any suggestions or see any problems. I'm uploading the next incremental change right now (AROMA Installer and QCOMM optimizations)
[update: Having some issues uploading to AFH at the moment, will post the link once I can verify the md5 is good and the upload isn't corrupted]
oldsoldier2003 said:
This ROM is still a work in progress but please feel free to let me know if you have any suggestions or see any problems. I'm uploading the next incremental change right now (AROMA Installer and QCOMM optimizations)
[update: Having some issues uploading to AFH at the moment, will post the link once I can verify the md5 is good and the upload isn't corrupted]
Click to expand...
Click to collapse
Advanced reboot and immersive mode and I would be set, especially with the QC and bionic stuff.
This is the perfect ROM I think for me to build my car nexus off since I will be running Timur's kernel + services. I want as minimal as possible.
Sent from my Nexus 7 using Tapatalk
You should build with GCC 4.8. Its under Google source And only requires a few chsnges to work.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
flyboy1100 said:
Advanced reboot and immersive mode and I would be set, especially with the QC and bionic stuff.
This is the perfect ROM I think for me to build my car nexus off since I will be running Timur's kernel + services. I want as minimal as possible.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
as promised... tonight was a bad upload night...
Download from AFH:
Flo++0.3.zip
MD5: 3eb4c88a7859c4508934642878a04342
you might consider installing Xposed and gravitybox(KK) this would neatly solve the power menu and immersive mode. I run both on my non dev rom with no stability issues whatsoever (I don't run any other Xposed modules on that ROM)
oldsoldier2003 said:
as promised... tonight was a bad upload night...
Download from AFH:
Flo++0.3.zip
MD5: 3eb4c88a7859c4508934642878a04342
you might consider installing Xposed and gravitybox(KK) this would neatly solve the power menu and immersive mode. I run both on my non dev rom with no stability issues whatsoever (I don't run any other Xposed modules on that ROM)
Click to expand...
Click to collapse
I will probably look into that, Just wanted a good base to work off w/o tons of extra fluff I won't use. Downloading the newest now
Sent from my SCH-I605 using Tapatalk
I couldn't get gps to work at all on this rom, did you perhaps trim a little too much?
Btw, how did you build this? I returned my flo today since Verizon has the deb/lte for 49.99 this weekend! There is nothing Like this over there and would really like something similar, even if I have to build it myself but I am clueless on how
Sent from my SCH-I605 using Tapatalk
flyboy1100 said:
I couldn't get gps to work at all on this rom, did you perhaps trim a little too much?
Btw, how did you build this? I returned my flo today since Verizon has the deb/lte for 49.99 this weekend! There is nothing Like this over there and would really like something similar, even if I have to build it myself but I am clueless on how
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I'll have a look at this and recheck the proprietary blobs to make sure they are current.
If you want to give building a ROM for deb a go just start here:
http://source.android.com/source/index.html
To compile it you'll need to have a working 64 bit Linux installation, it seems most of the folks here are using Ubuntu. There are tons of tutorials and if you get stuck shoot me a PM and I'll help if I can.
flyboy1100 said:
I couldn't get gps to work at all on this rom, did you perhaps trim a little too much?
Click to expand...
Click to collapse
Apparently this is a semi "known" issue with AOSP stock builds. It has been reported in the past that GPS won't work without GMaps. I flashed PA mico modular GAPPS (it doesn't have Gmaps) and installed GPS test and it reported that the GPS is indeed working.
For a car installation this would work well if you have a third party Navigation app you prefer over GMaps.
I then installed GMaps which further confirmed GPS is working. I've come to the conclusion that this is not "broken" , but is a feature that is not supported "out of the box" by the AOSP build. Makes sense to me since supporting the hardware is OS responsibility, where utilizing the data is application level responsibility.
Any updates ?
Mind if I try to port this to deb?
Sent from my Nexus 7 using Tapatalk
flyboy1100 said:
Any updates ?
Mind if I try to port this to deb?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I took a short (enforced) break due to internet issues last week. Right now I'm in the process of recompiling the ROM and cleaning up the installer so It will be a couple days before I upload a new version.
Have at it I don't have a deb device to test with, but if you have any problems I can try to help you through it in PM.
Work issues have slowed down my progress (double shifts and no days off... ) The next update will include freshly compiled Android Terminal and the latest update of SuperSu.
This project is not abandoned - just slowed down for a bit
Status update:
v0.4.0 [20140405]: Recompiled with latest version of busybox and added Android Terminal Emulator, TitaniumBackup 6.1.5.4. Updated Supersu to v1.94 - Temporarily discontinued use of Aroma Installer
Click to expand...
Click to collapse
It's late here I'll update and upload tomorrow after testing.
uploaded to AFH
http://www.androidfilehost.com/?fid=23329332407584361
MD5 : 5f0daca93ae6345917f39c743552c802
TESTING!!
I’m presenting my 1st ported ROM MIUI6_v5.7.9 for Xolo Q3000, with special thanks to:
1)Xolo for the awesome phone at affordable price,
2)MIUI for the wonderful rom,
3)Turkdevs.com & SmiLeToLiFe for the ported rom,
4)Dr. Avinash for MIUI6_Boot Logo and TWRP rev2 recovery,
5)Of course, me for Repartitioning Xolo Q3000. But, I need not to Thank myself as I know U will Like the rom & press the Thank Button,
I haven't take any permissions from you guys, I'm sorry for that, but your work is all credited to you, so, please forgive me.
Pre-requisites:
1)Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2)Before proceeding, Back up your Current Rom (Failsafe).
3)/System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4)SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1)Put the downloaded MiuiV6_5.7.9_By_SmiLeToLiFe.zip in sd card.
2)Delete any files from previously installed rom from sd card & phone storage (especially /android/data folder).
3)Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
4)Wipe /system, /data, /cache, Dalvik Cache, Android Secure using Advanced Wipe.
5)Install MiuiV6_5.7.9_By_SmiLeToLiFe.zip
6)Don't reboot system, Wipe Cache & Dalvik Cache & Press Home button.
7)Immediately, Install the MIUI6_5.7.9_Patch.zip
8)Again, Wipe Cache & Dalvik Cache.
9)Reboot System.
10)1st boot may take 3-5 minutes (Screen will be a boot animation not a Boot Logo. If you stuck at Boot Logo, then go to recovery & flash the rom again).
WARNING:I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1)Everything from MIUI working fine
2)Latest Google Keybord
3)WSM Tools Pre-Installed
4)SuperUser & BusyBox installed
5)MX Player as default media player
6)For full changelog, visit: http://en.miui.com/thread-130282-1-1.html
Bugs:
No major bugs, till now, few minor bugs are as follows:
1)Some of the Icons missing (I Guess, it needs Custom Kernel!!).
2)Dialer Crashes for USSD commands.
3)Report, if you found any.
Download Links:
1) MIUI6_5.7.9_Rom
2) MIUI6_5.7.9_Patch
3) Audio Settings Fix
Note: For Engineer Mode, dial *#*#3646633#*#*,
All the Best, Guys:good::good::good::good::good:
Screenshots:
1) MIUI6_5.8.6
2) MIUI6_5.7.9
Updates:
Note: Don't wipe cache & Dalvik Cache before, but don't forget to wipe them after flashing updates.
=> MIUI6_5.7.9 To 5.7.16_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscTjNUQUZoaElGeUU/view?usp=docslist_api
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
Full changelog at: http://en.miui.com/thread-133527-1-1.html
=> MIUI6_5.7.16 To 5.7.23_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscekNpRVVfMkpPeVE/view?usp=docslist_api
Full changelog at: http://en.miui.com/thread-135972-1-1.html
downloading
will post review by tomorrow
sachin.r.fulzele said:
Updates:
=> MIUI6_5.7.9 To 5.7.16_Update
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
2) Full changelog at:
=> MIUI6_5.7.16 To 5.7.23_Update
Full changelog at:
Click to expand...
Click to collapse
Bro any patch for dailer patch...
mujaid714 said:
Bro any patch for dailer patch...
Click to expand...
Click to collapse
Updates are uploading, It has been solved. Wait for link.....
Quick update
From is working fine
Smooth like butter
Titanium backup working fine
WiFi isn't working for me
Have tried tethering from other mobile and WiFi dongle
Will try a proper WiFi router tomorrow morning.
Update
It was my problem
Didn't do a proper flash
Everything working fine now
Awesome performance so far
Sent from my HM NOTE 1W using XDA Free mobile app
Hats off for ur work..nice and lagfree rom...wifi working for me...found a bug...in sound can't open audio setting got fc for setting. And only thing I miss the keypad notification light for msg and miss call..any way to get that..and how much is the camera pixel..
Maybe I should reinstall the ROM
Reinstalled and everything working like a charm
Sent from my HM NOTE 1W using XDA Free mobile app
Link for MIUI6_5.7.9 To 5.7.16_Update is updated
mujaid714 said:
Hats off for ur work..nice and lagfree rom...wifi working for me...found a bug...in sound can't open audio setting got fc for setting. And only thing I miss the keypad notification light for msg and miss call..any way to get that..and how much is the camera pixel..
Click to expand...
Click to collapse
Notification lights are limited to LED lights, to enhance battery life.
Camera capacity was not shown in megapixels, but MIUI utilizes full camera capacity (supported by Hardware).
Perfect port bro, everything working fine, rom is smooth n stable, found some bugs like fc settings when opening audio settings
awesome performance
thanks @sachin.r.fulzele for the awsum rom...smooth & very stable
wifi & mobile network work well
otg works well
dialer problem solve with MIUI6_5.7.9 To 5.7.16_Update
great sound
all games run very well(including high end)...no lag
some apps icons are missing
one more problem which i face (in other way this is not problem)...after update to 5.7.16 ....in settings it shows 5.7.9
Fonts working on this rom?
aaayush_singh said:
Fonts working on this rom?
Click to expand...
Click to collapse
Yup..i tried one or two...got error unfortunatly theme closed...
I m getting somekind updates fro miui. Can it b updated...
mujaid714 said:
I m getting somekind updates fro miui. Can it b updated...
Click to expand...
Click to collapse
no dont do that
our phone isnt officially supported so those updates will get u into bootloop
sachin.r.fulzele said:
Updates:
Note: Wipe cache & Dalvik Cache before & after flashing updates.
=> MIUI6_5.7.9 To 5.7.16_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscTjNUQUZoaElGeUU/view?usp=docslist_api
Bug Fixed:
1) Phone dialer crash for USSD commands fixed.
2) Full changelog at: http://en.miui.com/thread-133527-1-1.html
=> MIUI6_5.7.16 To 5.7.23_Update
Screenshot:
https://drive.google.com/file/d/0B9c3NsdJ2PscekNpRVVfMkpPeVE/view?usp=docslist_api
Full changelog at: http://en.miui.com/thread-135972-1-1.html
Click to expand...
Click to collapse
plz upload the 5.7.23 update
rohitsinghpu said:
plz upload the 5.7.23 update
Click to expand...
Click to collapse
Testing in progress......
rohitsinghpu said:
thanks @sachin.r.fulzele
some apps icons are missing
one more problem which i face (in other way this is not problem)...after update to 5.7.16 ....in settings it shows 5.7.9
Click to expand...
Click to collapse
I guess!! you haven't wiped cache & Dalvik Cache before/after installing update. So, it's showing same version no. even after update.
Missing icons are due to lacunae in stock kernel( I've tried a lot, but Needs custom kernel)
/!\Thread will be moved in Android dev section by moderator..../!\
Hi!
I share you my own build based on Ivan andI9300's works with my works.
This ROM will NOT work if:
[fix in next build] - you have partitonned your system (less of 1GB of free espace)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's news in this ROM:
-Full CM-13
-RIL code's based on I9300 Github
-Apps dex-preoptimization (speed up first boot)
-Brightness setup updated
-Swap activated (kernel)
-IO SHEDULERs added (kernel)
-DOZE Activated and working - (see screenshots)
-No bugs with auto rot.
-No bugs with camera
-No bug with BT (thanks P.A.N. from i9305 github)
I let you try it and report. This build will be updated every weeks.
How install it:
-Just install it over another CM13 Roms without wipe.
-You came from CM-12.1, you need to wipe all datas (system-data-cache-dalvik).
If you wipe all datas, after install GApp you may will have an error with AOSP Keyboard (crash):
How install GApps:
-Install the Rom, and directly after, install Aroma GApp
-Select all that you want WITH Google Keyboard. After have selected your apps, choose to delete KeyboardStock!!.
-Don't install Google Camera, it dooesn't worked!
-Install GApps, wipe cache and reboot
Or you can install the apk that i share, and deactivate Old Google keyboard
Then please DL Android keyboard apk, and save your current ROM before updated!
How DOZE works:
-download from xda doze setting editor or naptime from PlayStore
-Edit times to force Doze to be activated more fast (see my screenshots, i use this timers)
To try Doze you must let your phone, it will not work of you have your phone in a pocket on a car/train etc etc. If a sensors detect a movement, the phone becomes ACTIVE.
You can log Doze states by commands from adb:
Code:
Dumpsys battery unplug
Dumpsys deviceidle force
Dumpsys deviceidle step
Build Download:
https://mega.nz/#!7xVnnSAZ!fUhHr2HFHTLpHVdv08lsul9KQArBFp2s9lqjwp6twWk
New build - 14-02-2016:
https://mega.nz/#!jwMw1KzK!1DhjFdaLkbbCIExSkKpwbKQPUa4_bHkCtuhP3wuzqDs
Sources:
https://github.com/bizcuite/
Thanks to:
-Ivan Meler
-Cyanogen
-All users who helps me
Bizcuite
reserved for future
Thank you very much for supporting the machine we suffer with the device a little support
So this is like a mod? What CM13 ROMs were tested?
andrewKode said:
So this is like a mod? What CM13 ROMs were tested?
Click to expand...
Click to collapse
No, just a different way to code. I haven't say nothing about mod/others.
I know that many users had pb with Ivan's build (auto rot./data etc...). If i can offer another way, it's a good thing.
For information, i had NEVER installed Ivan's build, only mine, i don't know if you will have sames pb.
My Rom works since 1 mounth on my phone.
Bizcuite
Sent from my GT-N7100 using XDA Free mobile app
bizcuite said:
No, just a different way to code. I haven't say nothing about mod/others.
I know that many users had pb with Ivan's build (auto rot./data etc...). If i can offer another way, it's a good thing.
For information, i had NEVER installed Ivan's build, only mine, i don't know if you will have sames pb.
My Rom works since 1 mounth on my phone.
Bizcuite
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
M8 can you work on an stock aosp rom instead of cm please. Just a request. BTW gr8 rom testing now.
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Lynexius said:
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Click to expand...
Click to collapse
did you wipe internal storage as well? put youe rom files on an extenal sd , wipe everything and try again. Install gaaps after flashing rom.
simplyme2908 said:
M8 can you work on an stock aosp rom instead of cm please. Just a request. BTW gr8 rom testing now.
Click to expand...
Click to collapse
I can, i can
I need more space on my hard drive!!
Lynexius said:
Hello! i try to put this rom in my device, but it remains in bootloop at starts :S then i try with/without agni kernel 4.50 and opengapps 6.0 pico but don' t work :S. (i came from cm12.1, and i wipe all data).
In any case, very thanks for your work. (Sorry for my bad english)
Click to expand...
Click to collapse
Don't install Agni kernel, if the dev. doesn't have activated Swap, you may have a bootloop (fstab file error, partitions not mount).
simplyme2908 said:
did you wipe internal storage as well? put youe rom files on an extenal sd , wipe everything and try again. Install gaaps after flashing rom.
Click to expand...
Click to collapse
I have updated the "how to" to install GApp, don't reboot immediatly, install Aroma GApps (custom install) with KeyboardGoogle and force remove AOSP Keyboard.
I have tried twice the method.
Bizcuite
bizcuite said:
I can, i can
I need more space on my hard drive!!
Don't install Agni kernel, if the dev. doesn't have activated Swap, you may have a bootloop (fstab file error, partitions not mount).
I have updated the "how to" to install GApp, don't reboot immediatly, install Aroma GApps (custom install) with KeyboardGoogle and force remove AOSP Keyboard.
I have tried twice the method.
Bizcuite
Click to expand...
Click to collapse
Use cloud storage, I really want a stock aosp rom wish I could do something.
first of all, Thanks for this rom, @bizcuite !
so far so good aside from 1 weird issue with external sd card. ín storage settings it is displayed as "portable-storage" and card was renaed to "mac_create_". while using titanium backup to restore my apps i had to guess the folder name related to the external storage. after i found this and choose my backup folder i get the message "folder not writable", although i can still use the folder to acess my apps and restore them.
i'm concernd about this. how do we fiz this?
thanks a lot!
J4mps said:
first of all, Thanks for this rom, @bizcuite !
so far so good aside from 1 weird issue with external sd card. ín storage settings it is displayed as "portable-storage" and card was renaed to "mac_create_". while using titanium backup to restore my apps i had to guess the folder name related to the external storage. after i found this and choose my backup folder i get the message "folder not writable", although i can still use the folder to acess my apps and restore them.
i'm concernd about this. how do we fiz this?
thanks a lot!
Click to expand...
Click to collapse
Move your backup to internal storage and then restore. I didn't let titanium mess.with my sd card. Because many where reporting, loss of data and ****.
Hello! i follow your guide, but i have the same result :S Now i will do a list what i do when install the rom:
I use TWRP 3.0.0-0
1) Wipe all partitions (dalvik/art - cache - system - internal memory)
2) I install the rom zip.
3) I install Aroma Gapps directly and in custom setting i also install google keyboard and removing old aosp keyboard)
4) Finally i reboot, but only time system go in bootloop animation (i try it for 10 minutes)
i don' t use agni kernel
My rom base firmware is XXUFND3
Thanks for help me all
Wow, this ROM rocks, very stable, definitely a daily driver for me. Ok, this is what I did for install:
1) Use TWRP 3.0 to wipe the phone completely (internal storage included)... TWICE
2) Install the ROM via TWRP.
3) Install OpenGAPPS via AROMA installer, added the google keyboard inside the installation. - Make sure you select 'forceclean'
4) Boot, AOSP keyboard error, went into settings, and selected the google keyboard as default.
5) Flashed SuperSU zip file via TWRP
6) Installed BusyBox via Google Play
7) Flashed Xposed by romracer
8) Installed Xposed istaller
9) Installed 3C toolbox Pro from Google Pay
10) Proceed to delete the AOSP keybord and other useless items from system using 3C Toolbox Pro.
11) Installed SPenCommand.
12) Base system is now ready for loading everything else from the Play Store.
Only issue I have so far is that I cannot move programs into the system partition using either Titanium or 3C Toolbox. Other than that everything works fine.
One more thing, Google Camera works fine for me.
Lynexius said:
Hello! i follow your guide, but i have the same result :S Now i will do a list what i do when install the rom:
I use TWRP 3.0.0-0
1) Wipe all partitions (dalvik/art - cache - system - internal memory)
2) I install the rom zip.
3) I install Aroma Gapps directly and in custom setting i also install google keyboard and removing old aosp keyboard)
4) Finally i reboot, but only time system go in bootloop animation (i try it for 10 minutes)
i don' t use agni kernel
My rom base firmware is XXUFND3
Thanks for help me all
Click to expand...
Click to collapse
Hi,
Thanks to try the Rom and reports!
Have you tried to install gapps with the minimum? Just Android keyboard and force to uninstall stock keyboard?
Don't format external storage. It's not necessary.
FYI: i have begun to work on aosp...
Bizcuite
Hello everybody
Bizcuite yes i install minimum gapps + keyboard, play games and youtube. And yes i tick force uninstall.
No problem, i wait a future update of this rom :good:
Regards
Lynexius said:
Hello everybody
Bizcuite yes i install minimum gapps + keyboard, play games and youtube. And yes i tick force uninstall.
No problem, i wait a future update of this rom :good:
Regards
Click to expand...
Click to collapse
Have you try to install only the Rom without gapp, to see if it boots correctly and after install gapps?
Bizcuite
Yes bizcuite i test it also without gapps, I don't know why it dosn't work just me xD
let's see if someone else has the same problem.
Install philz recovery mount all partitions and then wipe preload manually or just tap clean to install new rom. Then flash the rom.
No many reports or complaints from users.
Is it a good news? No download of the ROM or no bugs?
Bizcuite