Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
I am going through the exact same problem on the exact same device with the exact same versions of update file and gapps zip file.
After almost trying to search any possible solution to it on google and xda, I gave up and tried to solve it myself by looking into the phone itself. There wasnt much I was able to do because of the Crash Loop saying "Unfortunately, Setup Wizard has stopped". So to rest the situation for now, I somehow went into Setting > Apps > Show System > Setup Wizard with setting logo and not the Cynogen Logo one! And Force stopped it.
Also, I cant open my home on the phone either. I press the home button and the Setup Wizard starts to crash again!
Its painful to see your beloved phone struggle to work like that! I sometimes hate CynogenMod for their nightlies and wish I could go back to the stable versions of Oxygen or CM 12!
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Tried More than 5 Different Gapps
playya said:
ok so how many gapps packages have you guys downloaded and tried? Ar you tryig each time with the same gapps and rom that is giving you issues
Click to expand...
Click to collapse
Initially, I thought its just an update. So there wont be any need to install Gapps back again. But then The Play store kept crashing. So I rebooted my phone after cleaning Google Play Services and Play Store.
That didn't help. Then Found somewhere written that the issue might be caused by corrupt Gapps or incompatible Gapps, So tried installing The Gapps downloaded from OpenGapps. There I downloaded all the versions of it from , Stock to nano and pico. None of them helped. The Phone is still crashing saying The Setup Wizard has stopped. Can't open Home Screen Either. Can't open Keyboard either.
Abhinav_Rakesh said:
1. Did you make Nandroid Backup of your stabe phone ?
If yes. Flash that and you'll get working phone again.
2. Gapps package you guys are installing are meant for Lollipop or Marshmellow ?
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
abhishek.karvi said:
Thanks for the reply Abhinav
Unfortunately i havent taken backup of my stable phone
The gapps package i tried to install is the latest version for marshmellow when i flashed cm13
I've mentioned the filenames of the ROM and gapps in my previous post
Thanks again
Click to expand...
Click to collapse
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Was getting the same error
Wiped the whole phone off including data reinstalled cm 13 (latest nightly i.e 28112015) and added the opengapps nano package to the flashing zip que in twrp solved the problem
Abhinav_Rakesh said:
Have you tried CM12.1 again ? May be resurrection remix rom ?
Try flashing the CM12.1 rom again .. If you are able to access recovery then use can also use USB-OTG ..
Download ROM, Firmware and Opengapps of Lollipop and try ..
sent from Bacon (OnePlus One)
Click to expand...
Click to collapse
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
abhishek.karvi said:
I've installed cm12.1 and gapps 5.1 nano.
Now the device is working properly...earlier when i was trying to flash cm12.1 (as ive described in Problrm 2) , probably i was using a wrong version of gapps/ROM (im unsure which one)
Thanks for your suggestion Abhinav.
Im going to stick with cm12.1 for a while now till cm13 is tested a bit more. Im sure that if we get a solution for cm 13 issue, many users would be benefited.
Once again, thank you for your support, ur doing a fabulous job XDA.
Click to expand...
Click to collapse
Found a solution!
Looks like the Gapps from Opengapps werent compatible with the 6.0 Marshmallow yet.
I spent a day looking for different gapps and tried them all on my phone.
The only gapps file which worked with CM13.120151128 update for the oneplus one was this one -->
But before installing this, In TWRP you need to Go to Wipe>Advanced Wipe And select > System, Data, Dalvik and Cache to wipe everything from your phone. Then Fresh install CM13.120151128 and Slim Zero gapps you downloaded from the above link!
All Of this, only if you want to really run your phone with Android 6.0 Marshmallow!
abhishek.karvi said:
Device - OnePlus One
Problem 1 ->
Ive tried to flash latest cm13 and gapps zip file
ROM - cm-13.0-20151127-NIGHTLY-bacon.zip
Gapps - open_gapps-arm-6.0-pico-20151127.zip
I did the following:
1. Copied ROM and gapps to device
2. Installed twrp v2.8.7.0
3. Rebooted to recovery
4. Wiped system,cache,dalvik cache
5. Install -> ROM and gapps
6. Wipe cache/dalvik
7. Reboot device.
When the phone starts, i get "Android is upgrading - optimizing apps.." , and once the optimizing part completes then immediately im getting error - "Unfortunately, Google App has stopped"
If i select "ok", it pops up again.
Im unable to use my device since the error message doesnt go away.
Problem 2 -
I got tired of trying to get cm 13 and decided to revert to cm 12.1
I followed all the above mentioned steps for flashing using cm 12.1 ROM
Now the ROM and gapps are flashed but when the phone starts, it goes through the process - "Android is upgrading - optimizing apps..", once that completes the screen goes blank.
On restarting the device, again i get "Android is upgrading - optimizing apps..", and once again the screen goes blank.
Problem 3 -
This ones not that bad actually.... I followed the above steps and just flashed cm13 ROM and didnt install gapps.
Now the device boots up.
Ive downloaded and installed Play store apk.
Then i installed the latest google play services apk
Now im getting the error "Unfortunately, Google play services has stopped"
How do i proceed now??
I have no idea what to do now.
Plz Plz help.
Thanks in advance
Click to expand...
Click to collapse
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
Thanks for this, it did the trick for me
Now running CM13.0-20151201 NIGHTLY Bacon.
The error "Setup Wizard Stopped" of in het nederlands "Installatiewizard gestopt" has not shown up again after changing permissions for "Setup Wizard" (one without cm logo)
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
MrSeler said:
what if i cant turn it on after the actualisation? i install the patch, the applications optymalize, then the screen turns black, i have an android icon again, phone seems to be loading, and then it just resets again and continually does that.i recently wipped off my previous patches so i have just this one =/ i can't or dont know how to copy the previous patch to my phone via PC because when its of or in the recovery i am unable to get into it's data, pc doesnt see it.
Click to expand...
Click to collapse
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
maxpayne1989 said:
From what i had seen, this case occurs when you didn't do a proper flash along with gapps. Make sure you flash the desired rom and with it the correct gapps package at a single stretch. Then Wipe Dalvik Cache and Reboot.
So just do a dirty flash and gapps.
I am not sure why you are not able to access your phone when TWRP is on. For me I had that option, copied the new zip files when in TWRP screen and started flashing from there.
Click to expand...
Click to collapse
yeah i m going to try this a few times more and write what were the results. all i have to do is simply copy the gapps into my phone, the pc sees it but im not able to access it in any way and cant figure out how.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
pankspoo said:
I followed u r steps on tugapower rom but can't solved this problem
Plz help any one
Click to expand...
Click to collapse
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
You're a life saver. Thanks for the tip! It works for me.
Yes I have the same setup and the same problem.
Interesting appraoch ... . My problem: I do not have "Setup Wizard" in the Apps List within settings ... and my phone stay unuseable
-------------------------
maxpayne1989 said:
After a lot of trying i finally managed to solve this setup wizard error by using the following steps. Without doing any clean wipe.
you have to be very patient and try to do the steps in between the clicks on the error OK button.
Go to Settings from notification drawer. APPS-- Click on 3 dots on the right top... select system apps.
Select setup wizard, one without CM logo.
And instead of blocking notifications from it, provide it complete access in permissions. I believe it needs access to contacts and telephone
This solved the trick for me.. I have no details to how this solves the error. You may give it a try.. Good luck.
Click to expand...
Click to collapse
I tried this approach to get rid of the "Setup Wizard has stopped" pop-up error, but got an error message when I tried to execute the command ...
>adb shell pm disable com.google.android.setupwizard
CANNOT LINK EXECUTABLE: cannot locate symbol "android_set_rt_ioprio" referenced by "/system/lib/libinputflinger.so".
page record for 0xb6f0f04c was not found (block_size=32)
tungdil said:
You could try what is described here ... or test with the following:
Disable the Setup Wizard form your PC with
Code:
adb shell pm disable com.google.android.setupwizard
It should display: Package com.google.android.setupwizard new state: disabled
Then you can follow the first steps of @maxpayne1989 's description. Of course you won't see the setup wizard because it is disabled. After enabling it again with
Code:
adb shell pm enable com.google.android.setupwizard
(should display Package com.google.android.setupwizard new state: enabled)
you can select it and try setting the permissions.
Click to expand...
Click to collapse
Related
I have a rooted HTC Desire X.
I installed slimbean from scratch following the instructions:
http://forum.xda-developers.com/htc-desire-x/development/rom-slimbean-3-1-unofficial-t2842487
1.- Wipe everything from TWRP, factory reset, internal storage and system.
2.- Install slim-0.1-protou-090814.zip and gapps-jb-20121011-signed
3.- Reboot
After reboot I connect the smartphone to the wifi and when I try to open Play Store it opens and closes by itself.
I tryed everything! Clearing apps cahe, factory reset from TWRP after installation, updating Play Store and Play services from Aptoide, installing gapps-jb-20130813-signed, installed cm10 instead of slimbean... All with the same result.
The only way I could make Google Play to open was with MIUI ROM. But this ROM is only in english, german and chineese and has a lot of bugs.
I think that the problem is that I can't add my gmail account for some reasson, maybe a play services problem. If I go to settings/accounts and press + button nothing happens.
Please I would appreciate help because now I have an unusefull device.
huckzzz said:
I have a rooted HTC Desire X.
I installed slimbean from scratch following the instructions:
http://forum.xda-developers.com/htc-desire-x/development/rom-slimbean-3-1-unofficial-t2842487
1.- Wipe everything from TWRP, factory reset, internal storage and system.
2.- Install slim-0.1-protou-090814.zip and gapps-jb-20121011-signed
3.- Reboot
After reboot I connect the smartphone to the wifi and when I try to open Play Store it opens and closes by itself.
I tryed everything! Clearing apps cahe, factory reset from TWRP after installation, updating Play Store and Play services from Aptoide, installing gapps-jb-20130813-signed, installed cm10 instead of slimbean... All with the same result.
The only way I could make Google Play to open was with MIUI ROM. But this ROM is only in english, german and chineese and has a lot of bugs.
I think that the problem is that I can't add my gmail account for some reasson, maybe a play services problem. If I go to settings/accounts and press + button nothing happens.
Please I would appreciate help because now I have an unusefull device.
Click to expand...
Click to collapse
Your best bet is to ask in the thread you got the ROM from or to post in the Q&A section of your device.
Have you tried turning off wifi to connect to Play? I see this was an issue previously and not sure it was fixed on SlimBean, but is fixed on SlimKat.
KennyG123 said:
Your best bet is to ask in the thread you got the ROM from or to post in the Q&A section of your device.
Have you tried turning off wifi to connect to Play? I see this was an issue previously and not sure it was fixed on SlimBean, but is fixed on SlimKat.
Click to expand...
Click to collapse
Thank you for your interest KennyG123,
Yes, I tryed to open it without connection to the Internet and it does the same.
It's a good advice, I will post this in the slim ROM for HTC Desire X threat since I think this should be a general problem, because I haven't installed nothing else.
I tryed to post this problem in the main slimbean threat but no one is answering there anymore so I keep trying.
I instaled cyanogenmod 10.2 with gapps-jb-20130813
I have the same problem but i found out that the problem is that I can't sign in with my Gmail account.
CM12 has a first set up menú that opens the first time you load android after flashing it. In this menú I am asked to enter my Gmail account but when i press add Nothing happends. So I can only ignore this step to continúe.
If I go to settings/accounts/+add account i go to another menú mail/work account/cyanogenmod/google. If I press Google it goes to the previous screen.
It looks like if gapps doesn't work for this old ROMs anymore.
Hi together,
after flashing the open gapps I got this:
"Unfortunately, Setup Wizard has stopped"" application crashed message
I tried the full -> Error 70
only the nano could be flashed and after reboot I got the same error: "Unfortunately, Setup Wizard has stopped"" application crashed message
I also tried to wipe ... no changes ..
what can I do to get gapps running on CM13?
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
strozi78 said:
Hi,
with the installation cm-13.0-20151128-NIGHTLY-hammerhead.zip I have the same problem... When the phone turns on I got the same error "Unfortunately, Setup Wizard has stopped", You have two options REPORT ERROR and OK, if I press OK then immediately displays the same error msg. and you can not continue..
what is the solution?
Click to expand...
Click to collapse
haven't found one yet ... and you?
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
solved! ... deleted google accound and remapped
Only the Setup wizard popup stops coming. Thanks for that.
There is a random popup about Google Play services which disappears on its own. I have given all permissions to the Google Play services app using the same steps as provided earlier. Still the same.
Please help.
Also in addition to this, there is a fix given by the OpenGAPPS team on GitHub as Notes for Android 6.0 (Sorry, cannot post link as this is my first post).
Can anyone help me patch this file onto my device (LG Nexus 5)?
Thanks in advance.
Maybe try different versions of gapps? I use the latest pico version and it works on the latest nightly.
I tried, micro, pico, stock.. All with same results. I was using nightly that came out on 12/02/2015.
Currently I reverted back to cm12.1 as I need to use the phone for day to day stuff. Please let me know if the latest nightly does actually fix this. And also which gapps, I will download the specified file and let you know by weekend.
Thanks for the help!
Try these gapps: http://opengapps.org
Yes I was using gapps from this site. I just need confirmation if the new cm13 nightly actually fixes the issue.
I guess it's not even with Cyanogen to fix the issue. The gapps when installed (flashed) , don't get the desired permissions to execute. It should be the a new gapps build released by opengapps. Still, I will keep searching.
PS: please look at the fix given by gapps team. I also don't know where to modify that code.
Here is how i got it to work.
1) Boot to recovery
2) Do a full wipe (Data,System,Cache,Dalvik)
3)Flash CM13
4)Do a wipe (Cache,Dalvik)
5)Flash GAPPS ( I used pico from Open Gapps)
6)Do a wipe (Cache,Dalvik)
7) Do a Factory Reset.
8) Reboot !
That should do it, Don't complain about useless wipes after trying for 2 days this finally worked !
I have my lovely G3 back
Good Luck !
I got it to work to flash it together with the ROM.
Cheers
I managed to make it work by installing CM13, in recovery mount /system and check how much space left on you system partition. After that you can choose the maximum size Gapps that fits the free space.
Wipe all excluding sdcard and USB-OTG. Install CM13 and Gapps together.
After reboot the wizard will not crash.
Other option is risky and can turn your phone into a break This is option is to resize /system to make it bigger.
I used the latest nightly CM13 for Xiaomi Mi4 and twrp-2.8.7.0-cancro
Solved
This guy will solve your issue watch this video
Search
Moto G Cm13 Gapps Fix (Setup Wizard)-TechZotic
on YouTube
sorry couldnt paste link as i am a new user
holzfelix said:
thanks that solved the problem with the setup wizard ...
and now I can run playstore but can't download apps - I got the error: Error while fetching information from Server
Click to expand...
Click to collapse
Thanks. This worked for me, although I had 2 Setup Wizard apps. The one with the CM logo had no permissions that needed assigning. The other one did. Once permissions were given, the issue went away. It was tricky to do it between the error dialogs appearing. What helped was switching to the guest account and back, then, occasionally, you had enough time to work the settings.
Had those Problems often, don't know why.
I just delete the settingwizard.apk in twrp (mount system, then system/priv-app if I remember).
Worked Several Times for me - you must do that always After flashing gapps!
My Fix....worked for me on HTC One M8
NOTE: Ensure you have a NANDROID backup BEFORE proceeding with the below, just in case something goes wrong
1. Ensure that you have all required files (CM13 Zip and Open GAPP Zip) saved to your phone (internal or SD card)
2. In my case, I used TWRP, so ensure you have the latest one
3. Boot into TWRP recovery
4. Using ‘WIPE’ option, select ‘Advance’ and choose: Data, Dalvik, Cache, System
5. Using ‘INSTALL’ option, Install CM13 via TWRP
6. DO NOT BOOT UP PHONE JUST YET
7. Perform a Cache and Dalvik wipe
8. Using ‘INSTALL’ option, Install GAPP Zip via TWRP (I used GAPP mini due to space)
9. Now you may reboot the phone.
The solved the ‘Setup not working’ issue for me and my phone is now working like a charm with CM13 and google apps! I have a HTC One M8 FYI
ThankYou So MUCH!
Kuarinfou said:
This problem is about permissions.Go to settings , apps , show system apps , tap setup wizard and give all permissions to it.
Click to expand...
Click to collapse
You're A Life Saver! Thanks!
please share solution for this or any working apps link..
I'm having problems post-flashing, getting the "trebuchet has stopped", google services has stopped, and various other google services crashing.
Flashed CM 13.1 from this thread;
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Flashed the marshmallow base G-apps from here:
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
After crashing, it gets stuck in the CyanogenMod blue character boot screen but will reboot eventual if I hold the power button a couple times.
I tried the various trebhchet "solutions" I've seen posted (force stop, clear cache there and in contacts) which doesn't solve the problem. I've also skipped the google sign in the setup wizard and went straight to apps to set permissions and to play store to download Google app and Google Now as a couple threads have suggested.
Looking for help please
paulsoncpa said:
I'm having problems post-flashing, getting the "trebuchet has stopped", google services has stopped, and various other google services crashing.
Flashed CM 13.1 from this thread;
http://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-cyanogenmod-13-cm13-0-t3303800
Flashed the marshmallow base G-apps from here:
http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
After crashing, it gets stuck in the CyanogenMod blue character boot screen but will reboot eventual if I hold the power button a couple times.
I tried the various trebhchet "solutions" I've seen posted (force stop, clear cache there and in contacts) which doesn't solve the problem. I've also skipped the google sign in the setup wizard and went straight to apps to set permissions and to play store to download Google app and Google Now as a couple threads have suggested.
Looking for help please
Click to expand...
Click to collapse
Flash ROM
reboot to system
reboot to recovery
flash gapps
reboot to system = errors
Reboot to recovery
Flash ROM
Flash Gapps
reboot to system = no force errors.
billysam said:
Flash ROM
reboot to system
reboot to recovery
flash gapps
reboot to system = errors
Reboot to recovery
Flash ROM
Flash Gapps
reboot to system = no force errors.
Click to expand...
Click to collapse
I'm pretty sure I did both and was getting errors either way. But I can try again and go with a clean install of CM.
So should I start from scratch (not worried about saving any data as It has been erased a couple times in my various attempts to fix it):
1.re-format
2.Flash recovery
3.Flash Gapps
4 reboot to system?
I read the reason for for the trebuchet error was because of it's tied in with the Google App (or Google Now) which is not included in the base gapps that I linked.
paulsoncpa said:
I'm pretty sure I did both and was getting errors either way. But I can try again and go with a clean install of CM.
So should I start from scratch (not worried about saving any data as It has been erased a couple times in my various attempts to fix it):
1.re-format
2.Flash recovery
3.Flash Gapps
4 reboot to system?
I read the reason for for the trebuchet error was because of it's tied in with the Google App (or Google Now) which is not included in the base gapps that I linked.
Click to expand...
Click to collapse
if that would be the case, there are many users using delta base gapps with cm13 with a clean install, why wouldn't we also had the same issue, including devs?
billysam said:
if that would be the case, there are many users using delta base gapps with cm13 with a clean install, why wouldn't we also had the same issue, including devs?
Click to expand...
Click to collapse
That's what I figured. I didn't see any threads under the CM 13 of people having issues so figured it was most likely in my flash process. I did re-format and re-flashed and it is fine now, so far. I did run into the trebuchet issue one time, but was able to force close, clear trebuchet cache, and change the permissions/defaults to fix it.
Something I did with setting the default launcher triggered the error, but not sure what.
Thanks for your help!
Hi, I am trying to enjoy AOSP rom, but there is a problem with it.
I first logged out the Google account from sense rom, I installed AOSP rom, the latest Magisk zip and MindTheGapps package at the same time from TWRP, then I reboot.
As you might have known, setup wizard should show me the login screen, right?
First steps are ok, but when it comes to logging in to Google, it just skips the dialog after 10 or 20 minutes later and just shows me the last steps of settings.
When I push 'finish' button in the last step, it sometimes shows me FC of setupwizard or says 'You should login with your Google account because your phone has been logged in with it.'
I presume I may need to do some kind of IMEI registration, would this problem related to such thing?
sorceforge said:
Hi, I am trying to enjoy AOSP rom, but there is a problem with it.
I first logged out the Google account from sense rom, I installed AOSP rom, the latest Magisk zip and MindTheGapps package at the same time from TWRP, then I reboot.
As you might have known, setup wizard should show me the login screen, right?
First steps are ok, but when it comes to logging in to Google, it just skips the dialog after 10 or 20 minutes later and just shows me the last steps of settings.
When I push 'finish' button in the last step, it sometimes shows me FC of setupwizard or says 'You should login with your Google account because your phone has been logged in with it.'
I presume I may need to do some kind of IMEI registration, would this problem related to such thing?
Click to expand...
Click to collapse
What rom are you trying to install? Did you format your internal storage? This is a must if coming from a sense based rom. Also, opengapps now supports 8.1 so you may give that a shot. I am on Lineage 15.1 and used the opengapps stock package on a clean install and everything worked fine.
jsaxon2 said:
What rom are you trying to install? Did you format your internal storage? This is a must if coming from a sense based rom. Also, opengapps now supports 8.1 so you may give that a shot. I am on Lineage 15.1 and used the opengapps stock package on a clean install and everything worked fine.
Click to expand...
Click to collapse
SlimRom with MindTheGapps. Of course, in order to bypass the encryption, I formatted the whole /data/ partition.
Also, OpenGapps does the same. I do not know why...
I've installed the new build of Lineage on my note 10.1 8010 and flashed it with the arm 7.1 nano Gapps which constantly pops up with the "Setup Wizard keeps stopping" error.
I've tried using the pico version and this didn't work either.
Reviewing some fixes online say that i should grant permissions to Contact and Telephone, for the SetupWizard, but my SetupWizard isn't requesting permissions to this, it's just blank.
I have found a com.google.android.setupwizard but these have already been granted.
Another fix is to make sure you have Wifi connected, which it is.
I've cleared cache and wiped everything many times to see if it was a way i was installing Gapps, attempting to install it right after the rom was installed, installed the rom, then booted and then installed Gapps...
..tried lots of different methods but nothing seems to work.
Using TWRP.
Been at this for days now and really out of ideas.
Thanks