Recovery px5 wondefoo android 9 - MTCD Android Head Units Q&A

I cannot reach recovery on my unit. It has no physical buttons. Can anybody explain how to reboot into recovery?

Bertkeuter said:
I cannot reach recovery on my unit. It has no physical buttons. Can anybody explain how to reboot into recovery?
Click to expand...
Click to collapse
Is it an MTCD type or variant of?

Yes it is MTCE_HXD

If you have an RST hole, then the video tutorial is here:

Thanks for the video. I have tried the reset procedure as you showed in the video. However, even after waiting 30+ seconds nothing happens. Maybe wait longer or another way to get into recovery mode.

I have tried your method. What I noticed is that it does not shutdown but goes on black immediaty. In your video it shows "shutting down". SO this method does not work on my pX5 unit. Any suggestions?

Press and hold until the buttons flash. Then release and press again briefly.

I tried. Even waited 30 seconds. But nothing happens.

So I don't know, it's a standard procedure, try to write a seller, maybe he has a different way. I read somewhere that instead of pressing RST a second time, he pressed power. Or watch videos on youtube, use the search engine and enter recovery PX ...

There is one more option. If you manage to install the Hal9k firmware, recovery is in the toolbar below the power button:
[ROM][PX5][PX6][PX30][Pie][9.0] Hal9k Mod v4 for MTCD/E head units with Android 9/8/6
This version is deprecated. The new version is here MCU version: MTCD_ХХХХ, MTCE_ХХХХ, MTCP_ХХХХ Firmware version: 4.0.0 (01.02.2020) Version of the latest OTA update: 4.2.2 (06.02.2022) About firmware: Firmware for car head units on the...
forum.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have done some more testing:
1st: The RST button seems to directly power off the unit (instead off shutting down).
2nd. Using the power button (not physical). This only puts in in standby and does not shutdown.
I think not getting into recovery has to do with the buttons not working like described in the for to go into recovery mode.

Related

Help to solve problems " Mid sharpixels InfoTMIC m009f " ( Solved )

First send a cordial and affectionate greeting to all users of the forum admin and mod :good:
I have left this tablet to try to solve a problem with the wifi, plug it in and cut a few seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been researching this tablet and there is nothing specifically for her.
I have some doubts:
1) The factory brings Rom does not have the ability to factory reset it, you might not have root. In total reset option but does not give anything.
2) Nor has the USB debugging option so I can not connect to the PC, connect and no response
---------------------------------
A real headache, I have EXPERIENCE in other tablet but with this or not and where to start.
- This tablet shaped enter in "Recovery" from the beginning ?.
I've been playing with the keys of power + menu + center key and varying options but does not enter into recovery mode.
- Is there a way with everything explained to charge any firmware ?.
I think it read in this thread the adapter is 24 Pin, s but the manual firmware loading indicates the need to connect the USB tablet.
- What would be to avoid mistakes most appropriate firmware according to the information provided ?.
Thank you very much anticipated by the aid.
Best Regards :laugh:
[m009f clone] Rooted firmware and a couple of tweaks for the PITA
I found this possible solution, but there is no way to connect
USB this tablet.
[m009f clone] Rooted firmware and a couple of tweaks for the PITA
I tried with Windows XP but the application for flash new firmware
not detect the connection, not even Windows detects a new device.
Any ideas or possible next steps according to experiences?
Thank you very much.
SOLVED !!!!!
SOLVED!!. :good: :good: :good:
For information and help other users with the same or similar problems
with these tablet based on Chip: InfoMIC m009f.
http://www.techknow.t0xic.nl/forum/index.php?topic=2971.msg33306#msg33306
Best Regard

[Q] PLEASE HELP ME, Urgent :(

Hello,
I have Samsung Galaxy Note 10.1 ( Old version ) .
I got a problem with my device
I can`t turn it on anymore, when I hook it up with USB plug into ( PC ) or ( Power Adapter ) I got the following screen :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so I thought its not charged.
But then I left it to charge full ( 3 - 4 hours or maybe more ) but when I turn it on the welcome screen shows and stucked forever like following :
I tried to reset the factory and data and cache and everything inside BOOT list ( into "Power + Voulme up " menu ) but nothing happen too and the welcome screen still keep stucking .
What can I do ?
Some people told me I should put a new ROM/Software into it
But what is true ? and where is the problem ?
Please HELP !
I can't see any of the pictures you have put in your post. Have you tried reflashing your current rom onto your Note 10.1 with Odin? That usually fixes problems like this and it lets you keep your data.
link6155 said:
I can't see any of the pictures you have put in your post. Have you tried reflashing your current rom onto your Note 10.1 with Odin? That usually fixes problems like this and it lets you keep your data.
Click to expand...
Click to collapse
I am not familiar with Odin nor reflashing and stuff .
m4xst4r said:
I am not familiar with Odin nor reflashing and stuff .
Click to expand...
Click to collapse
1. Find the firmware for your device base on it's model number: http://www.sammobile.com/firmwares/
2. Download Odin onto your computer and run it.
3. Get your tablet and when it's turning on, hold the power button and volume down button until you get to the warning screen.
4. Press volume up to continue to download mode and plug your tablet into your computer via USB
5. On your computer, make sure Odin says "Added!". Load the firmware as a PDA into odin and press "Start". Do not unplug your tablet until the process has finish.
6. Android should begin to update and once that's done you should be good to go.

Px30 mtcd_lm

Hello, I tried to install a custom MCU with sound patch and now the unit hardly boots. I got it to boot but it shutted off and I wasn’t able to flash the original MCU. I’ve been trying to get into recovery by holding down the power button until the key backlight flashes three times still holding it for three seconds and then letting go and pressing again.I tried with ADB but still no success.I tried making a SD card with SDBoot.bin but I am not able, the program crashes.The unit boots sometime and I am even able to start settings and etc...Thanks.
EDIT: I am sorry the unit is a MTCE_LM.
Ruzbynen said:
Hello, I tried to install a custom MCU with sound patch and now the unit hardly boots. I got it to boot but it shutted off and I wasn’t able to flash the original MCU. I’ve been trying to get into recovery by holding down the power button until the key backlight flashes three times still holding it for three seconds and then letting go and pressing again.I tried with ADB but still no success.I tried making a SD card with SDBoot.bin but I am not able, the program crashes.The unit boots sometime and I am even able to start settings and etc...Thanks.
EDIT: I am sorry the unit is a MTCE_LM.
Click to expand...
Click to collapse
Next step seems to me to be formatting your SOM flash and reflashing android via OTG. There's alot of posts detailing how to do this, the bootloop thread you posted in is a starter.
marchnz said:
Next step seems to me to be formatting your SOM flash and reflashing android via OTG. There's alot of posts detailing how to do this, the bootloop thread you posted in is a starter.
Click to expand...
Click to collapse
Maybe I have to do it or maybe I don't, because a few times it booted into Android. I am thinking about reflashing the original MCU which I have and just wiping all data may fix the issue, if I just enter recovery, that's the problem.
EDIT:I disassembled the unit and got the SOM out, gonna try, but if I fail how do I get it to MaskROM
on PX30?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I reflashed the SOM flash via OTG.The unit still doesn't want to boot.When I hold the power button the key backlight flashes so this indicates the MCU is okay?
EDIT: It showed me multi media on vehicle system bla bla and then BMW logo, which is strange because I reflashed and it should be a erisin logo and it turned off again.

SOM Flash issue?

So, after a couple of months running Android 10 without any issue, my MTC-D PX5 screen froze yesterday, and after a power off/on the screen never came back to life, but the panel lights did, showing a low-level boot-loop.
I tried to abort the booting process... no luck. Then I inserted the SD I used to upgrade to Android 10. Screen came back to life, Android 10 logo first, then showing the circle with the "preparing to upgrade" and then this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ERROR:do_rk_firmware_upgrade-->GetFlashInfo failed!
Any idea how to recover from here?
This is related to the SOM firmware, right? not the MCU...
@marchnz Do you think that your USB on-the-go HW mod to connect a PC directly to the SOM would help solving this?
Any help is welcome !!!!
:-(
Max
maxiauer said:
So, after a couple of months running Android 10 without any issue, my MTC-D PX5 screen froze yesterday, and after a power off/on the screen never came back to life, but the panel lights did, showing a low-level boot-loop.
I tried to abort the booting process... no luck. Then I inserted the SD I used to upgrade to Android 10. Screen came back to life, Android 10 logo first, then showing the circle with the "preparing to upgrade" and then this:
View attachment 5623185
ERROR:do_rk_firmware_upgrade-->GetFlashInfo failed!
Any idea how to recover from here?
This is related to the SOM firmware, right? not the MCU...
@marchnz Do you think that your USB on-the-go HW mod to connect a PC directly to the SOM would help solving this?
Any help is welcome !!!!
:-(
Max
Click to expand...
Click to collapse
If SD card method doesn't work, double check the files used and SDcard.
If SD card just won't work, use OTG / PC-SOM

really stuck Newbie needs help

I hope I am posting in the right place as I have been reading through so many threads in here my head is spinning.
I have a Vauxhall/Opel Astra J with an aftermarket Android stereo unit. there are NO buttons NO RESET button just a touch screen and an SD card slot
This was the only picture I could get while it was running
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it was a PX3 1024*680 on MTCE 2.83
I believe it has a rockchip processor?
I downloaded H9k firmware and it asked to erase and install after being inserted to the SD card slot. it restarted and hung up on the Hal9k car navigation multimedia screen. and Now it just keeps rebooting to the same bit and boot looping constantly. I have no buttons I can press on my head unit there is not reset button ether so I'm at a dead end how I can try to boot into a recovery mode and try to install a stable firmware again otherwise I have a paperweight sat in my car.
I'm not sure what other information I need to provide is anyone can help me at all it would be greatly appreciated.
Hi you can try this method:
Bricked Witson PX3 MTCD >>Solved<<
Do you know how can I enter recovery / reinstall firmware on a Winston PX3 without any buttons? just reset. The unit is made of Opel Insignia and uses the car button. The power power button only switches the screen on / off and nothing more. Is...
forum.xda-developers.com
Or flash a SOM with a simple USB cable:
[PX3 & 5] [OTG] - No Headunit Mod, recover or flash a SOM with a simple USB cable
"Factory" Recovery for MTCx PX3, PX5 and PX6 SOM. Finally - OTG for all without modifying your head-unit. With only basic electronic/soldering skills, get OTG and fearlessly flash or recover a 'bricked' MTCD/E (HCT printed on SOM) Rockchip PX3...
forum.xda-developers.com
If that doesn't work, you'll have to replace the processor board, maybe you can get it at the bazaar, or you can buy it at aliexpress.

Categories

Resources