So I ordered myself a full cover tempered glass online thru ebay. I knew the glass would only have adhesive at the edges, I wasn't able find any with adhesive in the middle but I thought about maybe using loca to fill the gap between the screen and tempered glass and I gotta say I'm pretty happy with the results. So to anyone that has some experience with loca repairs I'd suggest trying it out. If you've never used loca then I would suggest not trying it as it might end up being a messy project and you could damage your screen if you have loca seepage. I'm extremely happy with this phone now, touch panel is as responsive as if it didn't have any screen protector. I had a tempered glass on before but only covered the lcd portion of the screen and the edges would lift.
Can you post pics of the adhesive as well as instructions please thanks
Sent from my LG-H860 using XDA-Developers mobile app
will you be able to remove the glass protector if it breaks when you have used loca?
You took the idea right out of my head and I'm to see it works. Did you apply the LOCA to the whole piece of glass or only the areas without adhesive?
If you've ever worked with loca you shouldn't have a hard time with it, because it is not directly glued to the lcd removal shouldn't be too hard and shouldn't require too much heat to remove, definitely less of a risk. My whole family upgraded to the g5 so I still have three more devices I can try this out with, I can try to record myself doing it next time, I just have to place the order for the tempered glass again. Now do keep in mind I repair phones for a living pretty much, so working with loca is something I do often. Doesn't mean you wouldn't be able to do it you just need to have a pretty good idea how it works and what to do in the event it goes wrong. Give me about a week or so till I get a hold of more tempered glass and I'll definitely put a guide together. Quick list of things you'd need pretty much would the the tempered glass obviously, loca, 1mm adhesive, clamps, and uv light. It's a fun project, if you do it right you'll be extremely happy with the results. Loca in this case is only applied to the area without adhesive, because of how loca works you need to sort of trap the loca inside the area where there is no adhesive, build a seal in a sense, that's where the 1mm adhesive comes in place. I'll make a whole guide and video of next time I do it. I'm itching to try this on the gs7 edge my coworker has xD
gothikzoul said:
If you've ever worked with loca you shouldn't have a hard time with it, because it is not directly glued to the lcd removal shouldn't be too hard and shouldn't require too much heat to remove, definitely less of a risk. My whole family upgraded to the g5 so I still have three more devices I can try this out with, I can try to record myself doing it next time, I just have to place the order for the tempered glass again. Now do keep in mind I repair phones for a living pretty much, so working with loca is something I do often. Doesn't mean you wouldn't be able to do it you just need to have a pretty good idea how it works and what to do in the event it goes wrong. Give me about a week or so till I get a hold of more tempered glass and I'll definitely put a guide together. Quick list of things you'd need pretty much would the the tempered glass obviously, loca, 1mm adhesive, clamps, and uv light. It's a fun project, if you do it right you'll be extremely happy with the results. Loca in this case is only applied to the area without adhesive, because of how loca works you need to sort of trap the loca inside the area where there is no adhesive, build a seal in a sense, that's where the 1mm adhesive comes in place. I'll make a whole guide and video of next time I do it. I'm itching to try this on the gs7 edge my coworker has xD
Click to expand...
Click to collapse
How do you plan on removing the protector should it crack or become scratched beyond use? And also, you managed to squirt the right amount of loca so that it didn't leave any noticeable air gaps, and it didn't seep out?
Sent from my LG-H830 using Tapatalk
Actually ended up getting the v20 and same scenario with this device, there was no good tempered glass available so I ended up doing the same thing I did with my g5 on this one, I'm just posting up a video of my method. Hope you guys enjoy.
https://youtu.be/pXJiU9HpOpQ
I love my V30, but I've been agonizing over the best way to protect the screen. Flat glass protectors leave the edges exposed and tend to separate from the corners, while all the curved ones only had adhesive around the edges, so adhesion was weak while touch sensitivity suffered. I'd seen the Whitestone Dome glass, but it wasn't full-coverage. I ended up ordering the InvisShield True fit kit from SGFreshIdea for quite a bit more than the advertised price of $23.37. The cost of the UV light and shipping brought the total $44.09, which was a bit steep and the shipping took almost two weeks. It ended up being a decent kit, but there were a couple things I didn't like. First, the LOCA (Liquid Optically Clear Adhesive) came in two clear vials. Considering the fact that this stuff sets when exposed to UV light (such as daylight), this seemed like a really bad idea. Second, the glass had a large cut-out at the top for the earpiece and front camera. I preferred something with more coverage. Long story short, I realized that this was something I could do using cheaper and, in some cases, better components.
First, I ordered a full-coverage glass from a company called dooqi (seriously) off Ebay. It was $8.79 with free shipping and arrived in less than a week. Be sure to order the clear glass, since the black edged one won't allow the LOCA glue to cure. Then I ordered the XFactor Sticky-Icky1000 LOCA glue for $11.99 with free shipping and arrived in two days (gotta love Amazon Prime). There's a LOT of LOCA glue on Amazon, but you need to order the lowest viscosity possible, since the "normal" glue is too thick to work with easily. The InvisShield glue was VERY thin, almost like water, while the XFactor is more like vegetable oil. The thinner glue spread more easily, but I actually preferred the XFactor since small bubbles seemed to push out with less effort. The main difference is that the InvisShield glue requires no pressure during installation (they tell you NOT to press on the glass), while the XFactor has to be pushed to the edges and corners with a squeegee.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For the UV lamp, I ended up using the one that I purchased with the InvisShield kit. I also tested a UV flashlight I had in the garage for detecting coolant leaks, and it worked great. You can order small UV flashlights on Ebay for around $5 (free shipping) that should work well too, or you can simply let the glue cure by setting it in sunlight. The thing you need to keep in mind is that when the glue sets, it's still sticky. It isn't like epoxy. It cures to a clear, sticky adhesive that's perfect for phone screens. In fact, the LOCA glue is supposed to help fill in and hide cracks in the screen too when sandwiched between the phone and a glass screen protector. I haven't tested it, but it's something to consider if you have a cracked screen.
I strongly recommend watching the InvisShield installation video ( https://www.youtube.com/watch?v=eCaOeqCH-2o ). It covers the basics well, but there's one thing that they don't mention that is critical. TAPE OVER ALL OF THE OPENINGS ON THE PHONE! When I first installed the InvisShield, a small amount of the glue ran into the hole for the earpiece. I cleaned it with isopropyl alcohol, and thought everything was fine. After the installation, I powered up the phone and discovered that I could barely hear anything, even at the max volume. I just about puked. After a LOT of stress, I managed to clear the excess glue out of the speaker screen with rubbing alcohol, a tiny brush for cleaning electric razors and some compressed air. I can't emphasize this enough... you NEED to be VERY careful about preventing the glue from getting into any of the openings on the phone. If you screw up your device, PLEASE don't complain to me since I feel I've made it abundantly clear that you need to be careful with this stuff. It runs everywhere, and can make a mess even with proper precautions. I used the glass protector as a template to cut a piece of clear packing tape, so I could be sure that the hole was covered without extending under the close-fitting glass.
The dooqi glass has a thin adhesive strip around the outer edge that can be easily pulled off. Just be sure to remove any adhesive residue with something like Goof-Off Professional-Grade. By the way, this stuff also works great for cleaning up cured LOCA. Next, clean the screen and glass with the alcohol wipes included with the dooqi glass. Unlike the InvisShield method of putting a large pool of glue on the bottom and using gravity and capillary action to spread the glue, I applied a heavy strip of glue down the center of the phone. It's better to use more glue than not enough, since removing the glass to add more glue isn't an option.
When doing so, look VERY carefully for even tiny bubbles. If you see one, use something clean (like the corner of the small plastic card in the dooqi kit) to dab out the bubble. Then just line up the glass and lower it gently onto the phone. Don't worry if it's crooked... you'll have plenty of time to straighten it. Let it sit for a couple minutes while the glue spreads. Then take a squeegee ( I used and old gift card) to push the glue to the edges and corners. Work slowly and carefully, wiping the excess glue away with an alcohol soaked cloth. I used to install vehicle wraps, so I learned a long time ago that rushing the job leads to disaster. If you notice air bubble sucking in at the corners, make sure that the glass is perfectly centered on the phone. I noticed that a few bubble kept sucking in from the top, right corner. So, I pushed them back out, and applied a dab of glue on the edge where the glass meets the phone. This way, glue was pulled into the tiny gap instead of air. Also, don't freak out if glue is running off the sides of your phone. Just make sure that you're working on a clean drop-cloth, and have plenty of alcohol soaked cloth wipes for cleaning the excess glue as you work.
Once it's evenly applied, carefully clean up any excess glue and wait a minute or two to be sure that no bubbles suck in from the edge. If glue is covering the front camera hole, don't worry. It will clean off easily once the glue is cured. Then use you lamp, flashlight or sunlight to cure the LOCA glue. I found that about 10 minutes of moving the UV flashlight back and forth around the screen seemed to be sufficient. The InvisShield video warns about over-curing, but I know that my phone will be used frequently in daylight I don't think this is an issue. In fact, I'd feel safer curing it more than not enough, since the last thing you want is for the glass to shift.
Finally, remove the tape and wipe the whole thing down with an isopropyl alcohol moistened cloth. You might have to scrub a bit to get some of the cured LOCA off the edges, but it should clean up pretty easily. And that's it! Mine ended up looking perfect. I'll probably clean around the edges in a couple day to remove any dirt that sticks to the excess glue. Also, check for any gaps that form near the corners. If they appear, use a small dab of glue to fill them and hit it with more UV light. Let me know if you have any questions and I hope that is helpful!
dooqi glass: https://www.ebay.com/itm/Dooqi-Full...var=541441961034&_trksid=p2057872.m2749.l2649
XFactor glue: https://www.amazon.com/gp/product/B00GY4LL3G/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
UV flashlight: https://www.ebay.com/itm/Mini-LED-U...035402?hash=item5d7a6eb9ca:g:ZHoAAOSwKXdaconH
Thanks. Very nice write up. At 25.77 total, a much better option than the InvisShield True fit kit. I was going to try the Verizon screen protector, but it cost more than this and has terrible reviews. How long did the whole procedure take?
bilbo60 said:
Thanks. Very nice write up. At 25.77 total, a much better option than the InvisShield True fit kit. I was going to try the Verizon screen protector, but it cost more than this and has terrible reviews. How long did the whole procedure take?
Click to expand...
Click to collapse
I was stopping to take pictures so that added to the time, but I'd estimate that it took me about 30 minutes from start to finish. I'm also really picky and used a magnifier to check for even the tiniest bubbles.
Whitestone Dome Glass has international patent for LOCA(Liquid Optically Clear Adhesive) technology. Different from others, why bother with halo, rainbow and bubbles? Whitestone Dome Glass makes it different. Thanks to LOCA liquid adhesive method and curing process, adhesive is on all areas even on the edges of the screen. Hope you try our Dome Glass next time! For your reference please check to see images on our Twitter or Facebook of LG V30 Whitestone Dome Glass
When Whitestone comes out with glass that's actually curved (in spite of what your Amazon ad incorrectly claims), I'll consider it. Until then, I'll stick with the method I've posted here which costs half as much and exhibits none of the issues you mention. Thanks...
Btw - I did some research and found nothing to suggest that Whitestone has any patents on LOCA glue.
ED2O9 said:
When Whitestone comes out with glass that's actually curved (in spite of what your Amazon ad incorrectly claims), I'll consider it. Until then, I'll stick with the method I've posted here which costs half as much and exhibits none of the issues you mention. Thanks...
Btw - I did some research and found nothing to suggest that Whitestone has any patents on LOCA glue.
Click to expand...
Click to collapse
Do you see any halo, rainbow and bubbles? I think Whitestone's LOCA patent claim is full of it. If so, there would not be InvisibleShield, which is similarly LOCA glued.
I was very careful to check for any bubbles, and I can assure you that there aren't any. As for the other stuff, I have no idea what Whitestone is talking about. It looks just like the unprotected screen, with absolutely no visual defects. It covers the sides of the screen to within 1/32", and is a little over 1/16" short of full coverage on the top and bottom. Also, touch sensitivity is unaffected.
The only thing that worries me - is what will happen when you try to remove it.
Dooqi doesn't ship to Canada... just like InvisShield.
Orof said:
The only thing that worries me - is what will happen when you try to remove it.
Click to expand...
Click to collapse
It removes cleanly. Just slide a thin piece of plastic (like a credit card) under the edge and pop it off. A little bit of alcohol under the edge loosens it nicely. I didn't have any residue, but isopropyl alcohol would remove any if you did. The LOCA glue doesn't harden when it cure. It becomes a tacky adhesive.
I did this. Thanks for the tutorial and links! The only difference is i used the liquid adhesive and UV light that came with my whitestone done glass kit. This is a much cheaper solution for me than buying a replacement glass screen protector.
Thanks again!
p.s. make sure you peel off and get all the adhesive off of the dooqi screen protector and get the air bubbles out or you'll get some air bubbles.
ED2O9, thanks for the write up. I'm now in the process of accumulating the materials to do the full adhesive glass protector.
Just a caveat for anyone doing this. I spent 2 hours going through all of the V30 TG screen protectors on Amazon. All of the clear TG screen protectors without the black borders sold on Amazon ARE NOT FULL COVERAGE protectors, but instead are cut narrower in order to avoid fitting issues over the V30's curved edges. Props to ED209 for doing his homework and pointing the way to the appropriate screen protector that works for the full adhesive application which is the Dooqi TG protector sold on eBay.
However, one caveat: Dooqi offers 2 types of TG screen protectors on eBay. Read the item descriptions before buying. Links are embedded.
1. Dooqi Full Coverage 3D Curved Tempered Glass Screen Protector Saver for LG V30 - This is the one to buy. As mentioned by ED209, the cost is $8.79 for one screen protector. This one has curved edges and provides bezel to bezel screen coverage.
2. 3X Dooqi Premium Ultra Clear Tempered Glass Screen Protector Saver for LG V30 - Avoid this one. This one is cut narrow and covers only the flat surface of the screen, leaving the the curved edges uncovered and exposed. For the cheap price of $7.79 for a 3 pack, it's very easy to be tempted into clicking the Buy It Now button. Don't do it.
Interesting! I just put a whitestone dome on my son's V30+ - quite successfully I might add. He's using a Tech21 Evo Check case, so I knew the whitestone was compatible (see YouTube install video by the "naked" guy). Plus I didn't want to wait 2 weeks for the HongKong based alternative to get here. My son carries his phone in his pocket, and the edge adhesive option wouldn't stay in place for him.
Anyways, I have the extra tube of adhesive from the whitestone, so I might order a piece of glass and try it on mine!
Hey, thanks for the guide.
One thing I also did to help with the process - I used a hair dryer after I put the screen protector on the phone (before the LOCA was fully spread out on the phone).
This helped lower the viscosity and make it easier for the LOCA to move around. I used the hair dryer directly above the middle of the phone. (With the phone off of course).
Edit: Also, you can use the screen protectors with the black borders. Acetone (nail polish remover) does a great job at removing it. The adhesive comes off in one piece just by picking it off with your nails. If there's any residue left, acetone will get that too.
https://www.amazon.com/gp/product/B075Y3BBJC/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
This is the one with black borders that I used, and it worked great!
Excellent post, thought it would be boring duh ?like. NOT! Very informative. I saw on the page for Dooqi Glass a feature is Anti-UV protection!? I assume this adds more cure time..? I thought 10mins was excessive, but using w cheap light could explain.
I actually bought a kickass (seriously bright) LED uv/black light strip on Amazon for about 20$. Has a USB power source, decent length cable, LOW&HIGHT, and assume a extension port.
https://smile.amazon.com/gp/aw/d/B075K6NM8F?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
unimatrix725 said:
Excellent post, thought it would be boring duh like. NOT! Very informative. I saw on the page for Dooqi Glass a feature is Anti-UV protection!? I assume this adds more cure time..? I thought 10mins was excessive, but using w cheap light could explain.
I actually bought a kickass (seriously bright) LED uv/black light strip on Amazon for about 20$. Has a USB power source, decent length cable, LOW&HIGHT, and assume a extension port.
https://smile.amazon.com/gp/aw/d/B075K6NM8F?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
I used this one and it cured in about a minute. Did it extra to make sure it would stay though https://smile.amazon.com/gp/product/B00MJI8OCW/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Is it possible to apply your solution to this TGSP
Hi,
Thank you for this detailed procedure.
I'have already ordered a TGSP that cover the maximum of the black front face of the phone since I dont care about case-friendly aspect. But because it have the black edges, do you have a solution to apply the LOCA with this one?
The issue with the edged one is it because the extra glue will not be able to flow outward? Or just because the UV will not work on the edges? If it's because of the UV, is the original glue on the edges PLUS the LOCA glue on the screen should not be an alternative?
https://www.amazon.ca/gp/product/B07B2NRTXH/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
ED2O9 said:
I love my V30, but I've been agonizing over the best way to protect the screen. Flat glass protectors leave the edges exposed and tend to separate from the corners, while all the curved ones only had adhesive around the edges, so adhesion was weak while touch sensitivity suffered. I'd seen the Whitestone Dome glass, but it wasn't full-coverage. I ended up ordering the InvisShield True fit kit from SGFreshIdea for quite a bit more than the advertised price of $23.37. The cost of the UV light and shipping brought the total $44.09, which was a bit steep and the shipping took almost two weeks. It ended up being a decent kit, but there were a couple things I didn't like. First, the LOCA (Liquid Optically Clear Adhesive) came in two clear vials. Considering the fact that this stuff sets when exposed to UV light (such as daylight), this seemed like a really bad idea. Second, the glass had a large cut-out at the top for the earpiece and front camera. I preferred something with more coverage. Long story short, I realized that this was something I could do using cheaper and, in some cases, better components.
First, I ordered a full-coverage glass from a company called dooqi (seriously) off Ebay. It was $8.79 with free shipping and arrived in less than a week. Be sure to order the clear glass, since the black edged one won't allow the LOCA glue to cure. Then I ordered the XFactor Sticky-Icky1000 LOCA glue for $11.99 with free shipping and arrived in two days (gotta love Amazon Prime). There's a LOT of LOCA glue on Amazon, but you need to order the lowest viscosity possible, since the "normal" glue is too thick to work with easily. The InvisShield glue was VERY thin, almost like water, while the XFactor is more like vegetable oil. The thinner glue spread more easily, but I actually preferred the XFactor since small bubbles seemed to push out with less effort. The main difference is that the InvisShield glue requires no pressure during installation (they tell you NOT to press on the glass), while the XFactor has to be pushed to the edges and corners with a squeegee.
View attachment 4424608
View attachment 4424609
For the UV lamp, I ended up using the one that I purchased with the InvisShield kit. I also tested a UV flashlight I had in the garage for detecting coolant leaks, and it worked great. You can order small UV flashlights on Ebay for around $5 (free shipping) that should work well too, or you can simply let the glue cure by setting it in sunlight. The thing you need to keep in mind is that when the glue sets, it's still sticky. It isn't like epoxy. It cures to a clear, sticky adhesive that's perfect for phone screens. In fact, the LOCA glue is supposed to help fill in and hide cracks in the screen too when sandwiched between the phone and a glass screen protector. I haven't tested it, but it's something to consider if you have a cracked screen.
View attachment 4424616
I strongly recommend watching the InvisShield installation video ( https://www.youtube.com/watch?v=eCaOeqCH-2o ). It covers the basics well, but there's one thing that they don't mention that is critical. TAPE OVER ALL OF THE OPENINGS ON THE PHONE! When I first installed the InvisShield, a small amount of the glue ran into the hole for the earpiece. I cleaned it with isopropyl alcohol, and thought everything was fine. After the installation, I powered up the phone and discovered that I could barely hear anything, even at the max volume. I just about puked. After a LOT of stress, I managed to clear the excess glue out of the speaker screen with rubbing alcohol, a tiny brush for cleaning electric razors and some compressed air. I can't emphasize this enough... you NEED to be VERY careful about preventing the glue from getting into any of the openings on the phone. If you screw up your device, PLEASE don't complain to me since I feel I've made it abundantly clear that you need to be careful with this stuff. It runs everywhere, and can make a mess even with proper precautions. I used the glass protector as a template to cut a piece of clear packing tape, so I could be sure that the hole was covered without extending under the close-fitting glass.
The dooqi glass has a thin adhesive strip around the outer edge that can be easily pulled off. Just be sure to remove any adhesive residue with something like Goof-Off Professional-Grade. By the way, this stuff also works great for cleaning up cured LOCA. Next, clean the screen and glass with the alcohol wipes included with the dooqi glass. Unlike the InvisShield method of putting a large pool of glue on the bottom and using gravity and capillary action to spread the glue, I applied a heavy strip of glue down the center of the phone. It's better to use more glue than not enough, since removing the glass to add more glue isn't an option.
When doing so, look VERY carefully for even tiny bubbles. If you see one, use something clean (like the corner of the small plastic card in the dooqi kit) to dab out the bubble. Then just line up the glass and lower it gently onto the phone. Don't worry if it's crooked... you'll have plenty of time to straighten it. Let it sit for a couple minutes while the glue spreads. Then take a squeegee ( I used and old gift card) to push the glue to the edges and corners. Work slowly and carefully, wiping the excess glue away with an alcohol soaked cloth. I used to install vehicle wraps, so I learned a long time ago that rushing the job leads to disaster. If you notice air bubble sucking in at the corners, make sure that the glass is perfectly centered on the phone. I noticed that a few bubble kept sucking in from the top, right corner. So, I pushed them back out, and applied a dab of glue on the edge where the glass meets the phone. This way, glue was pulled into the tiny gap instead of air. Also, don't freak out if glue is running off the sides of your phone. Just make sure that you're working on a clean drop-cloth, and have plenty of alcohol soaked cloth wipes for cleaning the excess glue as you work.
Once it's evenly applied, carefully clean up any excess glue and wait a minute or two to be sure that no bubbles suck in from the edge. If glue is covering the front camera hole, don't worry. It will clean off easily once the glue is cured. Then use you lamp, flashlight or sunlight to cure the LOCA glue. I found that about 10 minutes of moving the UV flashlight back and forth around the screen seemed to be sufficient. The InvisShield video warns about over-curing, but I know that my phone will be used frequently in daylight I don't think this is an issue. In fact, I'd feel safer curing it more than not enough, since the last thing you want is for the glass to shift.
View attachment 4424610
View attachment 4424611
View attachment 4424613
View attachment 4424614
View attachment 4424615
Finally, remove the tape and wipe the whole thing down with an isopropyl alcohol moistened cloth. You might have to scrub a bit to get some of the cured LOCA off the edges, but it should clean up pretty easily. And that's it! Mine ended up looking perfect. I'll probably clean around the edges in a couple day to remove any dirt that sticks to the excess glue. Also, check for any gaps that form near the corners. If they appear, use a small dab of glue to fill them and hit it with more UV light. Let me know if you have any questions and I hope that is helpful!
View attachment 4424617
View attachment 4424618
dooqi glass: https://www.ebay.com/itm/Dooqi-Full...var=541441961034&_trksid=p2057872.m2749.l2649
XFactor glue: https://www.amazon.com/gp/product/B00GY4LL3G/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
UV flashlight: https://www.ebay.com/itm/Mini-LED-U...035402?hash=item5d7a6eb9ca:g:ZHoAAOSwKXdaconH
Click to expand...
Click to collapse
Almost every curved glass I've seen has a black border. While I haven't tested it, I would think that the black paint would block the UV lamp and prevent proper curing. I've removed the black paint from the glass by using Goof-Off Pro Grade or a similar solvent like acetone. Just be careful around plastics, since these solvents can melt them.
Sticking just with original black band glue on the edges and LOCA on the screen is not a viable solution according to you?
ED2O9 said:
Almost every curved glass I've seen has a black border. While I haven't tested it, I would think that the black paint would block the UV lamp and prevent proper curing. I've removed the black paint from the glass by using Goof-Off Pro Grade or a similar solvent like acetone. Just be careful around plastics, since these solvents can melt them.
Click to expand...
Click to collapse
oglaolga said:
Sticking just with original black band glue on the edges and LOCA on the screen is not a viable solution according to you?
Click to expand...
Click to collapse
No... why would you do that? The LOCA glue would prevent the adhesive strip from sticking to the screen. Just peel the strip off and use LOCA for the whole screen.
Hey, I know TG's are a pain with 2.5D glass but anyone used LOCA glue application? I did it on my Essential phone with great results. I'll probably do same with my OP6 which arrives tomorrow
jabbermacy said:
Hey, I know TG's are a pain with 2.5D glass but anyone used LOCA glue application? I did it on my Essential phone with great results. I'll probably do same with my OP6 which arrives tomorrow
Click to expand...
Click to collapse
Interesting, was thinking about doing that as well. What kind of glue did you use before?
Yeah, I've been thinking about it. The Whitestone protectors are great and that's all they are.
Sent from my ONEPLUS A6003 using Tapatalk
This is what I used, but I think it has a bit HIGH viscosity, it takes ~10-15 min to fully fill out the TGSP. I masked off the entire phone with tape to prevent any disasters You have to TRUST in your usage amount, pop bubbles with a pin or bent paperclip, and just let the material flow naturally. Also, watch for TGSP 'drift' as it will float while dispersing! TRY NOT to push around the SP, just help guide by 1mm or 2, NOT TOO FAR!!
It's NOT difficult but I was sweating the first time and messed up, just use rubbing alcohol and lint free cloth to remove the glue and do it again. Trust me, you can do it if my stupid ass can do it
https://www.ebay.com/itm/XFACTOR-UV...ORCH-51LEDs-/261566321431?hash=item3ce6915317
I just got this one because I no longer need the light and believe this will flow a lot better
https://www.ebay.com/itm/5ML-TP-250...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
with beautiful flat screen you do not need any extra glue.
just a little bit oil and you good to go if you have any air pockets on the edges.
Shame on screen protector makers not to mention about this trick !!