I have an AT&T LMG900UM. I am looking for a modem profile to load on the phone for a Canadian carrier Telus. I read on a previous in the LG G8 section regarding using QFIL and a firehose file to backup the modem partition to possibly obtain additional carrier profiles on the phone. It appears the LG Velvet does not have a firehose file for the 765g SOC so unable to obtain a backup using QFIL to obtain these files.
Can these files be obtained from a KDZ file or is there any other way to obtain these files?
Reading through the forum it appears there is not much for a root for the LMG900UM which I assume if there was root obtaining these files would be easier or obtaining from a Canadian carrier branded phone.
Related
I'm testing out this new Radio/ROM combination and i need the provisioning for US Cellular.
can anyone be kinda enough to put their phone into Diag mode and read Via QPST or CDMA Workshop (NV Items) and post the file?? of coarse hide your ESNs. QPST will usually Name the file after your ESN so rename it before posting.
thanks.
please some help me to find the mbn files for my cdma device huawei ec150 i have got its firmware idq tool ,qmat etc etc
i want these files because ,to write cefs dumo file i also got its spc code
but i am unable to use another ruim to this device
please help !!!!!!!!!!!!!!!!!!!1
can i get mbn files after disassembling firmware
I reside in Spain and was trying to find the Firmware to update my ATT Note10+ 5G (SM-N976U) and came across this website https://firmware.gem-flash.com to which I paid for the following files:
(1) COMBINATION_FAC_FAQ0_N976U1SQU3ATF1_FACFAC_CL18966390_QB32158047_REV00_user_mid_noship_MULTI_CERT.tar.md5
(2) N976U1SQU3ATF1_ENG_MODEM
I was hoping that the RAR files would contain the ODIN3 [BL/AP/CP/CSC/Home CSC/UserData] files but unfortunately it did not.
I would be most grateful if anyone can explain what the above files are for and if they are what I require to flash my phone and is there a program similar to ODIN that I would need to do so.
If necessary I can give access to the Gem Flash account from which the files can be downloaded and tested as it appears that the ''COMBINATION_FAC'' file is too large to upload here.
Thanks in advance for any assistance that may be offered.
Combination file is used to put the phone in factory(engineering mode), and the eng modem is just a modem extract from the combination file.
If you are not doing any hacks on the phone, those two files have no use
Hi guys,
I understand that modem.conf is a selector for which modem.mbn file to load? Right now I would like to make my device G8232 (XZs dual) load up specific modem.mbn for my provider which is Three UK (hutch_uk) such as for example "amss_fsg_keyaki_hutch_uk_volte_vowifi_tar.mbn". But my current firmware has no modem.mbn files in sys.sin and no modem.conf file in OEM.sin related to hutch_uk.
I downloaded single sim version firmware G8231_Customized NOBA_41.3.A.2.247-R9E, in this sys.sin all of the required modem.mbn files for Hutch_UK are present! But in the OEM.sin is no modem.conf for Hutch_UK which makes me believe that even if I flash single sim firmware, the correct modem.mbn file will not be loaded or am I incorrect? Seems illogical to me to not include modem.conf for hutch_uk but to include the modem.mbn files.
I thought to check OEM.sin from XZ F8331_Customized UK_41.3.A.2.192-R3E firmware also since this device uses the same modem. In modem-config folder is modem.conf and one folder for 122 and one for 452, all using only "telefonica_uk" so no specific call-up for "hutch_uk" mbn (I presumed they would be name related to MCC and MNC of simcard but I cannot see any relevance, does anybody know how they are defined?)
I then check OEM.sin from F8331_3 UK_41.3.A.2.192-R9E. I can see no folders but just one modem.conf with entry <"hutch_uk_volte_vowifi">. I guess in my case I could flash OEM.sin from this firmware, then flash G8231_Customized NOBA_41.3.A.2.247-R9E (But exclude OEM.sin)? If this works I guess I will be stuck with crappy 3 UK branding?
I understand that If my device was rooted I could simply put the relevant modem.mbn files into /system/etc/customization/modem/ and I could then change /OEM/modem-config/modem.conf to "amss_fsg_keyaki_hutch_uk_volte_vowifi_tar.mbn". But I worry about DRM keys. Is there a way I could gain root access with BL locked through fasboot or flashmode via PC? I have the hutch_uk modem.mbn files ready if I could gain root access to SYSTEM, I can edit modem.conf if i gain root access to OEM.
Thanks guys, I posted here because it's not specific to XZs only, I just wish to learn some more about modem-conf system and how folder numberds are related to sim numbers etc. Any help would be appreciated. Best wishes !
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
Hi everyone. This is for anyone with a S908e device that lives in Canada and would like to have proper signal, 5g, rcs in Samsung messages among other things.
This should work for other regions as well such as the US. If you want to PM me your Home CSC from your regions most recent firmware, I could try and make a zip file for you as well.
This process below requires root as well as a root file manager such as Root Explorer.
1. Download the Canadian CSC files below to you phone.
2. Unzip file to your phone.
3. Go to the root folder in root explorer and backup the optics and prism folders.
4. Go into optics, configure, carriers and delete the singles folder.
5. Then go to the search location of the unzipped optics folder and copy all of the folders in carriers to the same folder on the root of the device.
6. Next do the same for all folders in the prism folder of root.
7. Once everything is copied go back to the root folder, change the permissions to exactly what the screenshot attached shows. Making sure you select the 2 check boxes on the bottom.
8. When that is done reset your phone. You should now get 5g, better signal and rcs in the Samsung messages app among other things.
This should work for other regions as well such as the US. If you want to PM me your Home CSC from your regions most recent firmware, I could try and make a zip file for you as well.
As always do this at your own risk and remember to back up your data.
Ps. If anyone might know which files in the CSC would deal with Sim Card Manager I am trying to figure out how to keep the settings in it from changing when the CSC is changed.
Hi there, would this also work for SM-S908N? Mostly for 5G access. Thanks!
omnomnommm said:
Hi there, would this also work for SM-S908N? Mostly for 5G access. Thanks!
Click to expand...
Click to collapse
I believe it should work for any S908W device. Just depends on the available bands. Try and let me know I can update to add the N.
If it does not work you have no worries, you can just reflash your Home csc from the S908N factory firmware and everything be fixed. There is no reason this will not work for your device. Should also work on a exynos device.
Hello, Can you please make a zip file for me. I have attached the Home CSC of current SM-S908W XAC Firmware. I am planning to change my CSC on my SM-S908N KOO device. Thank You.