Ok, well I've read every thread I can find and have attempted many things to get this resolved with no luck. I have a G2X which I made a full backup of using CWMod before sending it back to LG for repair. It came back with 2.3.3 (I had 2.2 before). Now, I can't root because the Super One Click doesn't work and I can't get CWMod to work to enable me to restore the old ROM (or one of the new rooted ones provided here on XDA for just this purpose). When I reboot the phone with the power and volume-down buttons held, it boots into the "new phone" mode, not a recovery console that I was expecting so I could restore from ROM. So how do I restore from ROM when the CWMod doesn't run properly (because it needs root privileges)? I really just want to drop that 2.2 ROM back on my phone with all my apps, saved stuff, etc. Help anyone?
did you try the latest One Click NVFlasher for CWM 5.0.2.0 method?
are you still able to get to the "Please wait S/W update" screen?
Trying this now... fingers crossed...
Thanks!
HI!!!!
Perdona por escribir en español pero googleando encontre solucion para hacer root al lg g2x con gingerbread 2.3.3 y se trata de esta .zip la instalas desde clockwork recovery y listo!!!! espero haberte ayudado aunque un poco tarde quizas ... saludos desde guatemala ...---
h t t p : / / w w w . m e d i a f i r e . c o m / ? 9 2 q p r 5 2 5 z t b l h 8 w
wyldkard said:
did you try the latest One Click NVFlasher for CWM 5.0.2.0 method?
are you still able to get to the "Please wait S/W update" screen?
Click to expand...
Click to collapse
How did you get windows to recognize the APX driver once you plugged in your 2.3.3 based G2x? Ever since I bought my G2x preloaded with gingerbread, the new APX driver request installation does not even pop up. Is there another way to force install the APX driver without having to wait for windows to recognize it, go into device manager, manually locate folder with drivers, etc... ?
Hi, I do not think there is a way to do it other thanthe manual installation. Also I have gotten CWM with the NVFlash method then rooted using update.zip but after this any Tom I flash just bootloops :/ anyone know what I'm doing wrong?
I've got an Evolio EvoTab Fun ( 1GHz Allwinner( Boxchip) A10 proccessor, HDMI out, microsd slot, microUsb port; which I tried to root and managed to do so successfully.
The problem arised when I tried to push a couple of different recoveries, so I can make a full rom dump. First I pushed a recovery for the Allview AllDro Speed , which didn't work, except for booting into it. Anything you tried to do got you stuck.
Next I pushed a Nexus 7 recovery ( Yes, I know. Very stupid of me. ) and now the tablet doesn't start.
If I leave it a while for the battery to discharge completely, when I plug it into the charger, it gives me the charging animation, and if I press the On button, the backlight comes on, but that's all, if I press the On button again, it just shuts down and won't respond to any button, not even the charging animation when plugged in. I have a system dump, but I can't get it recognized by adb ( ubuntu ).
Can someone please help me ?
Kodin94 said:
I've got an Evolio EvoTab Fun ( 1GHz Allwinner( Boxchip) A10 proccessor, HDMI out, microsd slot, microUsb port; which I tried to root and managed to do so successfully.
The problem arised when I tried to push a couple of different recoveries, so I can make a full rom dump. First I pushed a recovery for the Allview AllDro Speed , which didn't work, except for booting into it. Anything you tried to do got you stuck.
Next I pushed a Nexus 7 recovery ( Yes, I know. Very stupid of me. ) and now the tablet doesn't start.
If I leave it a while for the battery to discharge completely, when I plug it into the charger, it gives me the charging animation, and if I press the On button, the backlight comes on, but that's all, if I press the On button again, it just shuts down and won't respond to any button, not even the charging animation when plugged in. I have a system dump, but I can't get it recognized by adb ( ubuntu ).
Can someone please help me ?
Click to expand...
Click to collapse
Anyone ?
Unbrick
Hi there,
I share your pain.
However, there is a way to recover it.
option 1.
If in Romania, send it to Evolio service (see www.evolio.ro). They can reflash it under warranty, or if this does not apply, it will cost you 50Ron (~10E) to do it AND you get back under warranty, if any remained.
option 2.
Download LiveSuit application (v1.07, just google it) and a modified .img file for alldro speed S tablet from http://www.filehost.ro/29137289/Evotab_Fun_4_0_4_ES_v2_img/
Note: this image was not made by me, it was made by user eugen_secuiu from the ALLVIEW ALLDRO PRODUCTS FORUM.
In my case i could not activate the wireless and had to re-flash the official image under warranty.
Hope you get it back to a working state.
If you got another solution meanwhile please share
Regards.
Thanks a lot.
Nu mă aşteptam să-mi răspundă chiar un român.
I'll try reflashing with the LiveSuit app.
LE: Had a hard time figuring out what drivers to install ( Installed Bootloader drivers ) LiveSuit says no device found. couldn't jump to update mode.
Could you explain more on a step-by-step basis please?
Kodin94 said:
Thanks a lot.
Nu mă aşteptam să-mi răspundă chiar un român.
I'll try reflashing with the LiveSuit app.
LE: Had a hard time figuring out what drivers to install ( Installed Bootloader drivers ) LiveSuit says no device found. couldn't jump to update mode.
Could you explain more on a step-by-step basis please?
Click to expand...
Click to collapse
cum o pun pe boot loader ce combinatie de butoane?
gimivasile said:
cum o pun pe boot loader ce combinatie de butoane?
Click to expand...
Click to collapse
O stingi, ții apăsat pe Vol Down, bagi cablul în ea și după ce bagi cablul ( continui să ții apăsat pe Vol Down ) începi și apeși de vreo 20 de ori Power, nu o să se vadă nimic pe ecran, dar o să o recunoască calculatorul. O să fac un tutorial zilele astea.
Kodin94 said:
O stingi, ții apăsat pe Vol Down, bagi cablul în ea și după ce bagi cablul ( continui să ții apăsat pe Vol Down ) începi și apeși de vreo 20 de ori Power, nu o să se vadă nimic pe ecran, dar o să o recunoască calculatorul. O să fac un tutorial zilele astea.
Click to expand...
Click to collapse
Hi all,
Note: I know we're all here from the same country but please use english so we can have a common ground for everyone, especially for people using the search function.
The good stuff:
Latest LiveSuit 1.09:
http://199.91.152.174/fl30alaby5gg/9cyn6r82vikvs96/LiveSuitPack_v1.09.rar
Latest STABLE release: LiveSuit 1.07:
http://www.softpedia.com/get/System/System-Miscellaneous/Live-Suit-Pack.shtml
How to use it:
The Evotab FUN shares striking similarities to another tablet, the Allview AllDro Speed S.
There is a section for software upgrade instructions for this tablet that should help you:
http://allview.ro/produse/tablete-pc/lista-tablete-pc/alldro-speed-s/descriere/update-de-software-alldro-speed-s-android-40426102012/
Hope this helps.
Regards.
Does anyone here know how to get recovery mode on Evotab 3?
Hi there!
Unfortunately the only possible recovery for a Evolio tablet is getting rid of the piece of ...
I gave mine away, for free, and moved to something better documented and supported by the dev community (mt6577 cpu).
Evolio makes appliances, like a fridge or cofee maker, not Open-source developement driven tablets...i sincerely have a lot more customization options on my 20yo motorcycle then i ever had on their product.
At 5 year warranty they officially announce there will be no updates for it AND refuse to supply the original ROM. img... plus the bullsh.t reasons like: it's not compatible with JB or my favourite "we don't supply the original installation image because we don't want you to break your tablet" :banghead:
... i'll buy another Evolio tablet when they'll come as cereal boxes gifts
Sent from my MB526 using xda premium
Hello guys.
I did follow instruction to flash "official" firmware for DL701Q. Evertything went smoothly but first booting got stuck at "Welcome" screen... where you select Language... it seems touch isn't working.
I had a adware/malware issue before flashing.. but my touch was working.
Any tips or any other firmware I can use? Yes, I tried to contact DigiLand with no response.
Please help!
JuanGarabato - el que compra caro y vende barato!
Hey Dears....I have Huawei Ascend G6-U10 and after i updated it and reboot it hanging on FASTBOOT mode and it show this message :
"Recovery image verify failed!"
"Please update to the authorized images. "
i am trying all methods like putting UPDATE.APP file on SD card and pressing VOL+ and VOL- and Power button continuously for 10 seconds but nothing happened.
i also try to get Product ID to unlock bootloader but i can't access my phone system and the product id which generated by "Huawei Product ID Generator.exe" is invalid when i am trying to use it in emui.huawei.com/en
can any one help my to make my phone alive
Tengo el mismo problema amigo, lograste solucionarlo?
My phone is bricked after self restart, and now it is stuck with "The system has been destroyed" loop
my bootloader is in default [locked] and I regret every second I didn't unlocked it sooner.
I already tried to flash new firmware but failed because my bootloader is locked. Currently, I'm still trying to enter edl mode without test point( I dont have the tool for it) by using patched fastboot and still failed miserably.
So how do I unbricked this phone?
poco x5 5g global
bootloader: locked
Can you get into fastboot?
rusa-raus said:
Can you get into fastboot?
Click to expand...
Click to collapse
I can get into fastboot, but I can't flash anything because of locked bootloader. Just bought proper tools and deep flash cable, and now Imma try to bypass edl auth
I think my edl cable is broken. Do you guys know where is the exact test point for this model( x5 5g)? Only found the test point for x5 pro but not for mine.
One more thing how do I enter edl if the phone automatically reboot after plug in the cable to my pc?
i was searching too but nowhere is that models edl points pic and i hope someone will show us
I had the same issue , System Destroyed In my new Poco X5 Pro . I tried to flash it in fastboot mode but bootloader is locked. I contacted one guy on telegram and he fixed my device. telegam - @XiaomiAuthorizedflashing
vimalfrenss said:
Tuve el mismo problema, el sistema se destruyó en mi nuevo Poco X5 Pro. Intenté flashearlo en modo fastboot pero el gestor de arranque está bloqueado. Me puse en contacto con un tipo en Telegram y arregló mi dispositivo. telegam - @XiaomiAuthorizedflashing
Click to expand...
Click to collapse
yes, but more expensive with @XiaomiAuthorizedflashing, there are cheaper ones
MJLH2V said:
yes, but more expensive with @XiaomiAuthorizedflashing, there are cheaper ones
Click to expand...
Click to collapse
I tried cheaper ones too they flashed 2 times but none of able them fix the phone
vimalfrenss said:
I tried cheaper ones too they flashed 2 times but none of able them fix the phone
Click to expand...
Click to collapse
I assure you that he will be able to solve it @XiaomiWorldWide Telegram