I've got an Evolio EvoTab Fun ( 1GHz Allwinner( Boxchip) A10 proccessor, HDMI out, microsd slot, microUsb port; which I tried to root and managed to do so successfully.
The problem arised when I tried to push a couple of different recoveries, so I can make a full rom dump. First I pushed a recovery for the Allview AllDro Speed , which didn't work, except for booting into it. Anything you tried to do got you stuck.
Next I pushed a Nexus 7 recovery ( Yes, I know. Very stupid of me. ) and now the tablet doesn't start.
If I leave it a while for the battery to discharge completely, when I plug it into the charger, it gives me the charging animation, and if I press the On button, the backlight comes on, but that's all, if I press the On button again, it just shuts down and won't respond to any button, not even the charging animation when plugged in. I have a system dump, but I can't get it recognized by adb ( ubuntu ).
Can someone please help me ?
Kodin94 said:
I've got an Evolio EvoTab Fun ( 1GHz Allwinner( Boxchip) A10 proccessor, HDMI out, microsd slot, microUsb port; which I tried to root and managed to do so successfully.
The problem arised when I tried to push a couple of different recoveries, so I can make a full rom dump. First I pushed a recovery for the Allview AllDro Speed , which didn't work, except for booting into it. Anything you tried to do got you stuck.
Next I pushed a Nexus 7 recovery ( Yes, I know. Very stupid of me. ) and now the tablet doesn't start.
If I leave it a while for the battery to discharge completely, when I plug it into the charger, it gives me the charging animation, and if I press the On button, the backlight comes on, but that's all, if I press the On button again, it just shuts down and won't respond to any button, not even the charging animation when plugged in. I have a system dump, but I can't get it recognized by adb ( ubuntu ).
Can someone please help me ?
Click to expand...
Click to collapse
Anyone ?
Unbrick
Hi there,
I share your pain.
However, there is a way to recover it.
option 1.
If in Romania, send it to Evolio service (see www.evolio.ro). They can reflash it under warranty, or if this does not apply, it will cost you 50Ron (~10E) to do it AND you get back under warranty, if any remained.
option 2.
Download LiveSuit application (v1.07, just google it) and a modified .img file for alldro speed S tablet from http://www.filehost.ro/29137289/Evotab_Fun_4_0_4_ES_v2_img/
Note: this image was not made by me, it was made by user eugen_secuiu from the ALLVIEW ALLDRO PRODUCTS FORUM.
In my case i could not activate the wireless and had to re-flash the official image under warranty.
Hope you get it back to a working state.
If you got another solution meanwhile please share
Regards.
Thanks a lot.
Nu mă aşteptam să-mi răspundă chiar un român.
I'll try reflashing with the LiveSuit app.
LE: Had a hard time figuring out what drivers to install ( Installed Bootloader drivers ) LiveSuit says no device found. couldn't jump to update mode.
Could you explain more on a step-by-step basis please?
Kodin94 said:
Thanks a lot.
Nu mă aşteptam să-mi răspundă chiar un român.
I'll try reflashing with the LiveSuit app.
LE: Had a hard time figuring out what drivers to install ( Installed Bootloader drivers ) LiveSuit says no device found. couldn't jump to update mode.
Could you explain more on a step-by-step basis please?
Click to expand...
Click to collapse
cum o pun pe boot loader ce combinatie de butoane?
gimivasile said:
cum o pun pe boot loader ce combinatie de butoane?
Click to expand...
Click to collapse
O stingi, ții apăsat pe Vol Down, bagi cablul în ea și după ce bagi cablul ( continui să ții apăsat pe Vol Down ) începi și apeși de vreo 20 de ori Power, nu o să se vadă nimic pe ecran, dar o să o recunoască calculatorul. O să fac un tutorial zilele astea.
Kodin94 said:
O stingi, ții apăsat pe Vol Down, bagi cablul în ea și după ce bagi cablul ( continui să ții apăsat pe Vol Down ) începi și apeși de vreo 20 de ori Power, nu o să se vadă nimic pe ecran, dar o să o recunoască calculatorul. O să fac un tutorial zilele astea.
Click to expand...
Click to collapse
Hi all,
Note: I know we're all here from the same country but please use english so we can have a common ground for everyone, especially for people using the search function.
The good stuff:
Latest LiveSuit 1.09:
http://199.91.152.174/fl30alaby5gg/9cyn6r82vikvs96/LiveSuitPack_v1.09.rar
Latest STABLE release: LiveSuit 1.07:
http://www.softpedia.com/get/System/System-Miscellaneous/Live-Suit-Pack.shtml
How to use it:
The Evotab FUN shares striking similarities to another tablet, the Allview AllDro Speed S.
There is a section for software upgrade instructions for this tablet that should help you:
http://allview.ro/produse/tablete-pc/lista-tablete-pc/alldro-speed-s/descriere/update-de-software-alldro-speed-s-android-40426102012/
Hope this helps.
Regards.
Does anyone here know how to get recovery mode on Evotab 3?
Hi there!
Unfortunately the only possible recovery for a Evolio tablet is getting rid of the piece of ...
I gave mine away, for free, and moved to something better documented and supported by the dev community (mt6577 cpu).
Evolio makes appliances, like a fridge or cofee maker, not Open-source developement driven tablets...i sincerely have a lot more customization options on my 20yo motorcycle then i ever had on their product.
At 5 year warranty they officially announce there will be no updates for it AND refuse to supply the original ROM. img... plus the bullsh.t reasons like: it's not compatible with JB or my favourite "we don't supply the original installation image because we don't want you to break your tablet" :banghead:
... i'll buy another Evolio tablet when they'll come as cereal boxes gifts
Sent from my MB526 using xda premium
ayuda flashee una rom diferente en mi lg g pro 2 y ya no enciende,con flashtool,no enciende ni en modo download ni nada,ni siquiera instala controladores,ayudenme se los agradeceria mucho.........
help meeee
como revivo lg g pro 2 ya no enciende nada ni la pc me reconoce,ayuda please,
Siga el webiste y descargar el archivo kdz.
http://www.lg-phones.org/official stock-lg-g-pro-2-tot-firmware-rom.html
A continuación, utilice la herramienta de LG Flash para flashear el archivo a su teléfono.
Yo no sé español, pero utilizando Google Translate para transmitir este mensaje. No sé y no puedo entender su situación exacta, pero podría ayudar.:good::good::good:
thank you very much friend, but do not turn on the screen, or let me install drivers, what happens is that I put a rom with flashtool the f350 model when mine is D838, and not returned to light, quite appreciate your help, many thanks and greetings from mexico
oprink said:
thank you very much friend, but do not turn on the screen, or let me install drivers, what happens is that I put a rom with flashtool the f350 model when mine is D838, and not returned to light, quite appreciate your help, many thanks and greetings from mexico
Click to expand...
Click to collapse
Hey,
Please answer as much as possible:
1) Can you see the LG logo ? (when starting up. Try on full charge)
2) Can you get to the download mode ?
3) did you download the kdz file ? (follow http://www.lg-phones.org/how-to-flash-unbrick-lg-g-pro-2-with-a-kdz-firmware.html
4) if you can install using kdz method it will be much easier as the software does all the work . So install all the tools mentioned in the site and see if it can detect the phone.
All the best :good:
EDIT:
Step 1: Enter Download mode (You should be able to enter by pressing Volume Up + Power key. hold for 15seconds)
Step 2: Download kdz file for your model
Step 3 Use LG Flash Tool 2014 (Works 100%)
Follow http://forum.xda-developers.com/showthread.php?t=2797190 in detail.
I tried it.
roykulkarni said:
Hey,
Please answer as much as possible:
1) Can you see the LG logo ? (when starting up. Try on full charge)
2) Can you get to the download mode ?
3) did you download the kdz file ? (follow http://www.lg-phones.org/how-to-flash-unbrick-lg-g-pro-2-with-a-kdz-firmware.html
4) if you can install using kdz method it will be much easier as the software does all the work . So install all the tools mentioned in the site and see if it can detect the phone.
All the best :good:
EDIT:
Step 1: Enter Download mode (You should be able to enter by pressing Volume Up + Power key. hold for 15seconds)
Step 2: Download kdz file for your model
Step 3 Use LG Flash Tool 2014 (Works 100%)
Follow http://forum.xda-developers.com/showthread.php?t=2797190 in detail.
I tried it.
Click to expand...
Click to collapse
Hello friend, you can not see the logo or turn on the screen, I do not even charge when connected to the pc does not recognize my drivers, I just put something like qualcomm, devices
Hey folks,
My Razr HD decided to malfunction today. After trying to open an app it rebooted and didn´t started android kitkat anymore.
The only way to stop the infinite motorola logo show is to enter on fastboot mode. The bootloader is locked.
So in this conditions how can I revive to phone again? Is it possible in this conditions to install a modded rom (like Cyanogen) instead the stock rom?
I now a very little about phones but I´ll try to use this situation to learn.
Please anyone can help me with this?
Thanks in advance.
gutosantana said:
Hey folks,
My Razr HD decided to malfunction today. After trying to open an app it rebooted and didn´t started android kitkat anymore.
The only way to stop the infinite motorola logo show is to enter on fastboot mode. The bootloader is locked.
So in this conditions how can I revive to phone again? Is it possible in this conditions to install a modded rom (like Cyanogen) instead the stock rom?
I now a very little about phones but I´ll try to use this situation to learn.
Please anyone can help me with this?
Thanks in advance.
Click to expand...
Click to collapse
Estou na mesma situação que você... Nada funciona. Nem RSD e nem fastboot.
my phone screen a line showed up and go green after flash the phone
i tried another firmware but it didn't work and i try flashing with 4 files and also
did't work the device is booting i can hear the sound but the screen just go green
any one can help me please......
flashei o twrp e tambem de uma tela verde
Hi everyone. After many hours trying to solve this by myself, I finally came here to ask you guys what to do. Maybe you can help me.
I tried rooting my Doogee S88 pro - Android 10 using this guide: https://unofficialtwrp.com/root-twrp-doogee-s88-pro/
But maybe that is where I effed up. The guide is for a Doogee S88 pro with Android 9. And I don't know if there is any difference.
So, after struggling with USB drivers (both adb and mtp) I finally could flash TWRP 3.4.0. Everything was in russian for some reason, but changing languages wasn't a challenge.
As the guide says, I should do a backup before attempting anything. And so did I. I have a backup folder both in my internal storage and my pc.
So when it came to enabling and using sideloader, it didn't work. So I made a copy of magisk*.zip to internal storage and installed it from there. By then, it failed as well and a message started popping up.
"
failed to mount /vendor (permission denied) error.
failed to mount /system_root (permission denied) error.
"
So, I did what my heart told me to do and tried to restore the backup. Same error, no answers in google. That's when I started to suspect that I used the wrong twrp
I couldn't boot into system, so everytime my phone started, it would go directly to TWRP screen. Start screen had orange state writen on it.
Anything I tried to do, installing stuff, wiping partitions, anything would fail and return the same error.
So it came to me? what if I lock the flashing of my phone? So I went to fastboot screen and used the fastboot flashing lock comand. It didn't help. Now my phone is bootlooping on doogee logo screen, written "red state your device has failed verification and may not work properly". I can't remove battery (There is no disassembly guide online), can't turn it off, can't connect it to my notebook.
Did I finally brick it?
Any help is apreciated.
Hola. Tengo el mismo problema. ¿Encontró la solución al problema? No encuentro la forma de iniciarlo en modo recovery. Está en bucle contínuo en el inicio. "Orange state".