Database Info

[Q] LG G2X 2.3.3 Root / ROM Troubles

Ok, well I've read every thread I can find and have attempted many things to get this resolved with no luck. I have a G2X which I made a full backup of using CWMod before sending it back to LG for repair. It came back with 2.3.3 (I had 2.2 before). Now, I can't root because the Super One Click doesn't work and I can't get CWMod to work to enable me to restore the old ROM (or one of the new rooted ones provided here on XDA for just this purpose). When I reboot the phone with the power and volume-down buttons held, it boots into the "new phone" mode, not a recovery console that I was expecting so I could restore from ROM. So how do I restore from ROM when the CWMod doesn't run properly (because it needs root privileges)? I really just want to drop that 2.2 ROM back on my phone with all my apps, saved stuff, etc. Help anyone?

did you try the latest One Click NVFlasher for CWM 5.0.2.0 method?
are you still able to get to the "Please wait S/W update" screen?

Trying this now... fingers crossed...
Thanks!

HI!!!!
Perdona por escribir en español pero googleando encontre solucion para hacer root al lg g2x con gingerbread 2.3.3 y se trata de esta .zip la instalas desde clockwork recovery y listo!!!! espero haberte ayudado aunque un poco tarde quizas ... saludos desde guatemala ...---
h t t p : / / w w w . m e d i a f i r e . c o m / ? 9 2 q p r 5 2 5 z t b l h 8 w

wyldkard said:
did you try the latest One Click NVFlasher for CWM 5.0.2.0 method?
are you still able to get to the "Please wait S/W update" screen?
Click to expand...
Click to collapse
How did you get windows to recognize the APX driver once you plugged in your 2.3.3 based G2x? Ever since I bought my G2x preloaded with gingerbread, the new APX driver request installation does not even pop up. Is there another way to force install the APX driver without having to wait for windows to recognize it, go into device manager, manually locate folder with drivers, etc... ?

Hi, I do not think there is a way to do it other thanthe manual installation. Also I have gotten CWM with the NVFlash method then rooted using update.zip but after this any Tom I flash just bootloops :/ anyone know what I'm doing wrong?

[Resolved] [Q] [HELP] Is my MTK6589 phone hard bricked ?

EDIT : SOLVED :
Many thanks to slot78
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.

Hello!
I think i can help to you! Send me a private message and tonight i will message back with the sollution...just i working now.
kaceps said:
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.
Click to expand...
Click to collapse

I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards

I haven't succeded (yet) but thanks a lot for the info.
I think I got the right point on the motherboard. When I connect it, I can see a white led lightning up near the ubs port on the phone. So, I guess connecting the point makes my phone react.
But I think I might have a driver problem now.
Here is what happened.
Launch Flashtool as admin.
Load a scatterfile (any file, at this point I just want to be able to flash anything.)
Battery in, usb cable connected
press load.
the red progress bar imediately reach 100%
I try to connect he testpoints.
nothing more happens. Sometime I see various errors, not always the same.
Before finding the test point method, I tried all kind of drivers. Now I'm not sure which one is left on the system or wich is the correct one.
Anyway thanks for pointing the test points to me !
Also, thanks for the recovery and the ROM.
But none of them contains a preloader / scatter file. So, at this point, even if I get the right drivers I can't load them. I'll try them later if I manage to revive the phone, but right now my aim is ...
1 / Cleanup the drivers, and reinstall the right one
2 / Get flash tool to load anything on the phone via test point
3 / Find the right preloader and load it via test point
If I manage to do that, then I should be able to put back the back cover, and load the recovery "normally".
In the meantime, any advice is highly welcome.
Like :
- Any tips for cleaning up / installing drivers ?
- Any idea what the right preloader is ?
- Precise order on what to plug when flashig ( Battery / plusg USB / Load in flashtool / Connect points ? )
But more than eveything, thank you ! I might not have succeded yet, but at least I am not stuck anymore. Before your post I didn't know what to do. At least, now I have the test point and I can try something.
Also, sorry for the late answer. I had a lot on my plate, and didn't realise you had answered.
I suscribe to be sure not to miss any more answer.
Skot78 said:
I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards
Click to expand...
Click to collapse

Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards

Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Skot78 said:
Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards
Click to expand...
Click to collapse

kaceps said:
Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Click to expand...
Click to collapse
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot

Skot78 said:
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot
Click to expand...
Click to collapse
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
EDIT ;
YES ! Phone résurected !
What I did :
phone not pluged, test points already connected
Windows -> write memory.
Go to tab Write memory
Open raw data -> select preloader.bin
select EMMC
Adress 0x0000000000
length 0x00600000
Write
Plug phone (with test point already connected)
The prelaoder gets written -> green circle.
unplug phone
After that back to main tab
select scater file from the same image, clic firmware upgrade
connect phone
Loading goes through ...
Green circle,
Phone switch on -> Success !
Thanks a lot, I will now try to flash the CWM recovery and the rom you recommended ... but later.
Right now my phone can boot again, and that's awesome !

kaceps said:
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
Click to expand...
Click to collapse
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...

Lol, you must have answered while I was editing my post.
As I said, Phone resurected ! Success !
It is now booting normally, with a stock rom.
Next steps are
1 / CWM + the rom you suggested.
2 / Fix memory to use the whole memory on one system partition. (It seems the i2000 for some reason does not use all the available memory.)
But all that is not problematic anymore. I just need the time to get to it
Many thanks for your precious help, I wouldn't have been able to do it without you.
Skot78 said:
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...
Click to expand...
Click to collapse

Aswome!
Congratulations!
http://www.4shared.com/mobile/C4f0jQeEce/meteos-mtk6589-rom-edit-8gb-16.html
It's an apk for repartitioning your memory! Use only maximum 1,5 GB system memory options!
After that you must reflash the rom of course and your internal sd will cleared too!
But not the cwm recovery!
I'm happy now!

Get the 2.7 GB of memory on one partition ... OK
Get more available memory ... nope. Not sure it is actually possible on my version.
CWM ... OK
insall the kitkat themed rom you gave ... I don't know.
Skot78 said:
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Click to expand...
Click to collapse
How long exactly ? Because I think the 4 color moving logo has been displayed for 15 minutes now.I know first boot can be long ... but at what point do I decide the phone is not just slow booting but actually stuck ?
Edit : Well, I'll stop at 30min I think.
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.

Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium

kelvinvalencio said:
Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium
Click to expand...
Click to collapse
Well, depends on what you call hardbrick and soft brick.
I bricked it using only software. So, it's soft.
But I had to open it and attach a wire to the motherboard to unbrick it ... so kinda hard to.

kaceps said:
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.
Click to expand...
Click to collapse
Eh it's will be difficult, you know i customized that rom... Because i did not found too. It was not a really rom develpoment just kind a "patchwork"...
The problem is, you have (i think) v2.1 board in your Inew I2000...In Hungary...one company sold v1.1 verzion...it called "Myaudio 508"...
For the v2.1 i have only stock rom...
But i did only few imporvements....Working GPS (with hw modding too) not blurry cam (hw too) different launcher, customized bootanim, different (and less) system ringtones and notifications. Some build.prop tweaking...etc...etc...
I try to make 4.2.2, because i have a working version, but still have two bugs, but that harder bugs and my phone sadly dead.
http://forum.xda-developers.com/showthread.php?p=50010654
My motherboard have a contact issue and i cant find replacement anywhere...I asked chinese factories...i asked russian fans...nothing
I'm a sad panda now...And looking for new phone...There are few new very intresting phones!
But if you want ask anything...just do it! if i can, i will help..

Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?

Japetas said:
Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?
Click to expand...
Click to collapse
You shold check the motherboard version number...Already i know two versions of this phone...The v1.1 and the v2.1...
For the flashtools the firmware names contain "_21" or "_v21"...In previous posts i linked a v21 rom. If you need the older one...i don't have v1.1 rom for flashtools now (because my phone is dead) but you can use the "spot method" and cmw rom + zip firmware form.
Best Regards

Inew I2000 Brikado
Inew I2000 5.7, Mtk6589, 8G. Updated the ROM and correct at all right Flastool plus the smartphone does not turn on and no battery carrega.Vi not the other members had the same problem.

Preciso de ajuda Inew I2000 brickadi
aloizo celso alves cardos said:
inew i2000 5.7, mtk6589, 8g. Updated the rom and correct at all right flastool plus the smartphone does not turn on and no battery carrega.vi not the other members had the same problem.
Click to expand...
Click to collapse
alguem pode me ajudar?
Fiz a atualizacao de rom do inew i2000 5.7 8g com flastool e correu tudo bem, vermelho, rixo, amarelo e verde ok., agora o smart nao liga esta brickado.
Por favor me explique como fazer o metodo de teste da placa mãe, onde tenho que fixar o arame?

Im partition my 8 gb sd card into 6gb 2gb . I want to repartition that is i want to recover my sdcard fully 8gb that is single 8gb . What can i do?? Thanks in advance..
Sent from my GT-S6102 using XDA Free mobile app

No Recovery on MXQ Amlogic S805

I have a MXQ Amlogic S805 and want to flash EmbER and install Kodi. When I hold down the reset switch and power up I never get recovery. tried holding it down for 5, 10, 30 seconds etc. It always boots to Mbox
I dont think there is any recovery install on it so I'm trying to install TWRP the recovery.img is in root but its not booting anything.
I've tried this but burntool doesn't detect the device (also tried connecting using the reset switch) (my device doesn't have a micro usb just 4 normal)
can I get help on getting recovery please?

cramhead said:
can I get help on getting recovery please?
Click to expand...
Click to collapse
Maybe you had the same issue like me. If you have the microSD right from the beginning inside it doesn't work. If so remove the card, try once more and if it will work then you can put the microSD in and flash I took me almost 30min to discover it.
good luck

That solved my problem too. Removing the microsd did the trick. After booting into recovery simply push it back in and flash away!
Thank you so much!

Hi, I have MXQ pro 4k, Amlogic s905, and I really do not find guide how to make flasch and root on this tvbox. AMLOGIC S905? Please help me, because I can not setting subtitles in right codepage. I need code page windows 1250 eastern europe. I have KODI installed.

the same things on MXQ pro S905. no recovery mode.
I bought here. - h t t p : / / aliexpress.com/item/MXQ-Pro-Android-TV-Box-Amlogic-S905-Quad-Core-Android-5-1-DDR3-1G-Nand-Flash/32500107918.html
Most likely a defective series. The seller does not respond.

I tried to trace the track of a button. In my opinion, there is no resistance. See photo. Maybe someone has the reference schematic of S905 board. Where should the button be connected?
h ttp://srv01.technikexpert.com/files/IMG_1.jpg
h ttp://srv01.technikexpert.com/files/IMG_2.jpg

My mxq pro 4k s905 has frozen and Im trying to make a bootable sd card with am logic boot card maker but it doesn't display the sd in drop down list in tool, help!
well I managed to make a bootable sd card using Bootcardmaker but no luck and tried using usb burning tool and can get device connected but get fails with error: can't get key
fails at 1% trying to flash

It's not your normal Android recovery. Its activates a recovery mode( when used with a computer) for easy flashing.

Would you mind sending me some info to help? My MXQ Pro 4k keeps freezing during playback and kicking me out to menu. Would like to install a factory image that isn't modified by the seller I bought from who won't respond. Can pm info here to : powduh09 or email, or hangouts to [email protected] thnaks

I would love that information

Tutorial
https://www.entertainmentbox.com/lat...ndroid-tv-box/
Firmware
https://drive.google.com/file/d/0B-otRcubD2DtbWpNNEN2eWgyTUE/view

Exodusche said:
Tutorial
https://www.entertainmentbox.com/lat...ndroid-tv-box/
Firmwares
https://drive.google.com/folderview?...&usp=drive_web
http://pan.baidu.com/wap/share/home?...479075&third=0
https://www.dropbox.com/s/2l0hhi6z02...160509.7z?dl=0
http://freaktab.com/forum/advertiser...o-amlogic-s905
---------- Post added at 11:14 AM ---------- Previous post was at 11:13 AM ----------
Posted everything I know.
Click to expand...
Click to collapse
These URLs all appear to be truncated in the middle by '...' am I missing something? Thanks.

Farkonian said:
These URLs all appear to be truncated in the middle by '...' am I missing something? Thanks.
Click to expand...
Click to collapse
I will upload the one I use to google drive tomorrow. For now you can try this one.
https://drive.google.com/file/d/0B-otRcubD2DtbWpNNEN2eWgyTUE/view

Hello, the link for the tutorial now redirects to a page not found. By chance is the tuturoial available as a link elsewhere?
Exodusche said:
I will upload the one I use to google drive tomorrow. For now you can try this one.
https://drive.google.com/file/d/0B-otRcubD2DtbWpNNEN2eWgyTUE/view
Click to expand...
Click to collapse

I too have a MXQ Pro+ 4K which has stucked at MBOX home screen display with distorted screen. Tried hard to get in to recovery but nothing worked. Pressing Reset button and USB Burning Tool giving no response. Its just boots to same screen again. Stock recovery is there I know (tried once when it was working) but how to get in to that when home display is frozen??
Any idea guys ??

Hello I was using TWRP on my MXQ S805, first TWRP did not open I try again and start to open, than Come to FREAKTAB.COM. I pull the power cord and I started again finely start working than updating 81 files did this least 3 times than stay stock now my box only comes on PREAKTAB.COM and staying that way.
Anyone know how to open PREAKTAB.COM with SD card or solution Please
USB burning tool does not connect with MXQ S805 box and I am looking for solution please. help will nice thank you.

Sobre o s805
Olha eu me deparei com isso agora , oque eu fiz eu instalei no dispositivo o apk oficial do TWRP , baixei o recovery original do meu dispositivo , coloquei ele num cartao sd e pluguei, logo no apk do twrp eu instalei o recovery por lá e voltou a funcionar o recovery original

[Stock Rom][CWM]LG Bello II (x150) 5.0.2 lollipop

-WORK IN PROGRESS!​(lgx150)​LGX150-00-V10j-EUR-XXX-NOV-10-2015​
Hello Friends, has you may know there is no ROM for lg Bello 2 !! But I have Good News you Can Flash the ROM from x155, x160, 165 ,165g on bello 2 (x150)​
LG BELLO 2 Flash Tutorial
1. You will need original firmware (This one is for lg max and its android 5.0 not 5.0.2 but works !) - Rom Download below !
2. You will need Smart Phone Flash Tool (version 5 and up or will not work !)
3. You will need Teck VCOM SERIAL USB DRIVERS. tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation- (follow the installation, steps this is very important and if you are in windows 10 you will need to remove driver signature to be able to install, just google it !)
3. Now start Smart Phone Flash Tool and load scatter MT6582_Android_scatter.txt from the downloaded firmware folder.
4. The flashing process :
- Take out the battery from the phone.
- On the SPF Tool list select files all the files.
- Click Download button on the app
- Connect your phone to PC via working USB cable.
- Now just wait a couple of minutes
5. Unplug the phone, put the battery in, and try to power it on. Hopefully it will boot, slowly, wait and set language etc...like the first time you bought it or after a factory reset. Now there is a reason for joy
6. if your language does´t show just use Language Enabler from the app store to enable it !
Download !
If you have any question here´s my e-mail in the subject type bello 2 !
PS: Sorry for my bad English:

Reserved --- - CWM
So i have the stock recovery but i cant build the cwm if you have experience and want to help build the cwm just send me an email !
I need the cwm to port a android 6 / 7 rom to lg bello 2 and maybe make a custom rom or a cm rom !

Reserved 2 ---

Reserved 3---

=)
any news? =)

comelinhas said:
any news? =)
Click to expand...
Click to collapse
Nope , just trying to fix my lg first

Fernandodx1000 said:
Nope , just trying to fix my lg first
Click to expand...
Click to collapse
=( my got some errors. launcher 3 doesnt work and keyboard disapeard =(

Recovery Lg Bello II
Anyone have recovery LG Bello II? I

i heve
Recovery for x155

JimyDream said:
Recovery for x155
Click to expand...
Click to collapse
can you please upload the recovery for for x155 ? please i really need it because my lg x155 is not booting into recovery. and i also cannot factory reset my phone.

Recovery for x155
JimyDream said:
Recovery for x155
Click to expand...
Click to collapse
Can you please give me the Recovery for x155 .. thank you.

JimyDream said:
Recovery for x155
Click to expand...
Click to collapse
Pls help fix my phone. i need that recovery for my lg x155. It will be a very big help for me if you upload it. thanks in advance

All go to
JimyDream said:
Recovery for x155
Click to expand...
Click to collapse
All go to 4pda.RU in lg max support

when I upgraded to android 5.x, then my phone runs out of battery so fast

Download link not workin
Download link not working or fake

Question
Hi Fernandodx1000
What is LG Bello 2 Bootloader unlocker / locker?
What is achieved when unlocking the bootloader in this model?
Regards
Olá Fernandodx1000
Bello servindo para 2 Bootloader LG unlocker / locker?
Que o alcançado para desbloquear o bootloader sobre este modelo?
lembranças
Sorry for the english and portugues.....

I want to ask how I can change the language list to add or remove language from the system list. I want to know where the language list file in the system I want to edit this file but I not find this file so maybe you can help me ..
thanks for all helpers

Another one
Hi folks...
My LG X150 depends on this thread. I have also bricked my phone and need to flash factory rom.

Unbrick Bello 2 LGX150
pakevic said:
Hi folks...
My LG X150 depends on this thread. I have also bricked my phone and need to flash factory rom.
Click to expand...
Click to collapse
Well, glad to say, I fixed my LG Bello 2 phone.
Several days I have searched Internet for solution and found one that worked.
My device was soft-bricked(can't turn it on, practically dead rock)
So I am writing this to help others that suffer the same problem to revive their phones also. Folks like me that prefer entry level phones don't like to waste money on buying a new device
To begin... Phones like LG Bello 2 (LG MAX, LG Prime 2), x150, x155, x160, x165 are practically the same. These versions are sold all around the world and are basically the same phone, just with lite variations. In the core of each one of them is a Chinese MTK 6582 chip. This is very important !!!
Nice China manufacturers have put some neat functions into this chip so it can be flashed with right tools and unbricked easy ...if one knows what he is doing.
>>>IF THE OPERATION FAILS, I WOULD NOT TAKE RESPONSIBILITY AND ALL I DO HERE IS SHARE PERSONAL EXPERIENCE AND KNOW-HOW FOR FREE>>>> Btw, consider the option that your phone is hardbricked and has some serious hardware malfunction, so flashing it wont help.
As I mentioned, there is so called META mode for MT65xx based phones and it is used for flashing firmwares.
These are the steps how I did it:
1. You will need original firmware in "scatter" form. Basically it is a folder with system and android backup files and a scatter file that is something like a "grocery list". I couldn't find x150 firnware so i downloaded one for x165. You may find it by name(STOCK ROM LGX165g-00-V10a), or search for some other version.( I hope someone will put original x150 firmware for download on XDA forums soon...)
2. You will need software called Smart Phone Flash Tool and it is used for flashing MT6582 chips. Go to the spflashtool.com page. It works on Windows or Linux. For win you will need drivers.
3. Drivers are special for this purpose and called Media Teck VCOM SERIAL USB DRIVERS. You can download the drivers on previous page or at tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial page where the installation process is explained nicely... and be sure to check "preloader usb driver". You will know what I am talking about when the moment comes.
3. Now start the application and load scatter MT6582_Android_scatter.txt from the downloaded firmare folder. The app will then load all necessary files and prepare them for flashing. In the list there are many files, and by the names you could presume what they are for. The PRELOADER file is very important as it is device specific and if you are not sure that you downloaded the right firmware, you should skip it. It is used for mapping your phones internal memory, so if you flash wrong one...well my phone was already dead so I had nothing to lose.
4. The flashing process :
- Take out the battery from the phone, it is not needed.
- On the SPF Tool list select files (I had to check and flash them one by one because of some errors)
- Click Download button on the app
- Press and hold Vol down button (This is a mighty Chinese secret to trigger META mode)
- Connect your phone to PC via working USB cable.
In couple of moments flashing should start, and you can release Vol down button. Watch pretty colors on the progress bar and wait for it to finish. (Btw in some other phones it is needed to short circuit test points on the motherboard to initiate META mode, so I am very happy this is not the case with Bello 2)
5. Unplug the phone, put the battery in, and try to power it on. Hopefully it will boot, slowly, wait and set language etc...like the first time you bought it or after a factory reset. Now there is a reason for joy
If you fail at some point, recheck your steps, think, search for solutions on the Internet and do it again.
Now, remember: Your phone could be damaged in some other way, so this procedure won't work.
Anyway, at least you tried to do something. Just prepare yourself, arm with knowledge and be focused.
I would be glad to know if I helped you bring your phone to life and saved your money, so don't be lazy and hit Thanks button if all goes well :good:
Kind regards, everyone.
..and still waiting for that CM ROM for Bello ll :victory:

Bonjour a tous je recherche une manière d'installer xposed framework (modules: Obb on sd...) dans mon lg x150 ( Lg Bello 2 ) Android 5.0.2 car je suis embètter pour l'espace interne de mon appareil qui est insuffisant j'ai tester l'instalation du framework avec un terminal a la place d'un recovery custom mais en vain . Merci de me répondre au plus vite et j'attends avec impatience la CWM

problem boot loop root fail

Hello and thank you for those who will try to help me.
I tried to follow a tutorial to root my one plus 8 pro android 11 last night. So I followed several youtube tutorials. only I put a rom which was poorly optimized. The wifi didn't work. So trying to do everything I went to the developer settings and I disabled the usb debugging which is important for the future. So not knowing enough the basics in root I wanted to unroot my smartphone, and I went to the magisk manager and I click on uninstall (I did not uninstall the app but I click on uninstall in the magisk manager). I do not know if the smartphone restarts but it does not matter. I then check if the wifi works, nay, I looked using the root checker if the smartphone was still root, and it is marked that the smartphone is not root which is normal since I have it unroot. In a wind of panic I therefore wanted to do a factory restart by deleting everything (which is silly). So I went to the bios (the menu when you press volume down + on / off button) I clicked on delete wipe data, I also delete the data etc ... When restarting the smartphone takes time , I tell myself that it is normal, then black screen, then it restarts, then again black screen, then I panic. Fortunately, I manage to go to the smartphone's bios by some manipulation (when the screen goes black I can press the on-off button for a long time and a classic android menu appears with marked turn off and restart, when I select turn off the smartphone turns off and I can therefore turn it on again with the low volume manipulation + on / off button which redirects me to the bios) once in the bios I can go in recovery mode or in fastboot mode. So I tell myself that I can try to flash my one plus with the stock rom (original) but I don't know which version to take and if it matters. I can't find the original rom on the official one plus site (as is the case for xiaomi from what I saw on a youtube tutorial). THE question I am also asking myself is if I will be able to flash it while, as I said previously, I have disabled the usb debugging.
If qlq would have the solution or if someone knows someone who could help me, that would be of great help to me.
thank you to those who have read my pad, I may be explaining the problem poorly, do not hesitate to ask me questions to better understand my problem in order to better resolve it.

bixdab said:
THE question I am also asking myself is if I will be able to flash it while, as I said previously, I have disabled the usb debugging.
Click to expand...
Click to collapse
Flashing a properly signed Stock ROM can get achieved by Fastboot method - where it doesn't matter whether Android OS is boolooping or not.

Comment restaurer de 0, débricker ou downgrader son OnePlus - Smartphones OnePlus - Phonandroid.com
Un grand merci à Some_Random_Username pour les fichiers unbrick, et à Zayatoshi pour certains compléments d'infos Source : XDA ======================================================================================================================================== Avertissement : Cette...
www.phonandroid.com
i found this and it works.