Database Info

Bricked Evolio EvoTab Fun, A10 Boxchip ( Allwinner ) ; pushed wrong recovery

I've got an Evolio EvoTab Fun ( 1GHz Allwinner( Boxchip) A10 proccessor, HDMI out, microsd slot, microUsb port; which I tried to root and managed to do so successfully.
The problem arised when I tried to push a couple of different recoveries, so I can make a full rom dump. First I pushed a recovery for the Allview AllDro Speed , which didn't work, except for booting into it. Anything you tried to do got you stuck.
Next I pushed a Nexus 7 recovery ( Yes, I know. Very stupid of me. ) and now the tablet doesn't start.
If I leave it a while for the battery to discharge completely, when I plug it into the charger, it gives me the charging animation, and if I press the On button, the backlight comes on, but that's all, if I press the On button again, it just shuts down and won't respond to any button, not even the charging animation when plugged in. I have a system dump, but I can't get it recognized by adb ( ubuntu ).
Can someone please help me ?

Kodin94 said:
I've got an Evolio EvoTab Fun ( 1GHz Allwinner( Boxchip) A10 proccessor, HDMI out, microsd slot, microUsb port; which I tried to root and managed to do so successfully.
The problem arised when I tried to push a couple of different recoveries, so I can make a full rom dump. First I pushed a recovery for the Allview AllDro Speed , which didn't work, except for booting into it. Anything you tried to do got you stuck.
Next I pushed a Nexus 7 recovery ( Yes, I know. Very stupid of me. ) and now the tablet doesn't start.
If I leave it a while for the battery to discharge completely, when I plug it into the charger, it gives me the charging animation, and if I press the On button, the backlight comes on, but that's all, if I press the On button again, it just shuts down and won't respond to any button, not even the charging animation when plugged in. I have a system dump, but I can't get it recognized by adb ( ubuntu ).
Can someone please help me ?
Click to expand...
Click to collapse
Anyone ?

Unbrick
Hi there,
I share your pain.
However, there is a way to recover it.
option 1.
If in Romania, send it to Evolio service (see www.evolio.ro). They can reflash it under warranty, or if this does not apply, it will cost you 50Ron (~10E) to do it AND you get back under warranty, if any remained.
option 2.
Download LiveSuit application (v1.07, just google it) and a modified .img file for alldro speed S tablet from http://www.filehost.ro/29137289/Evotab_Fun_4_0_4_ES_v2_img/
Note: this image was not made by me, it was made by user eugen_secuiu from the ALLVIEW ALLDRO PRODUCTS FORUM.
In my case i could not activate the wireless and had to re-flash the official image under warranty.
Hope you get it back to a working state.
If you got another solution meanwhile please share
Regards.

Thanks a lot.
Nu mă aşteptam să-mi răspundă chiar un român.
I'll try reflashing with the LiveSuit app.
LE: Had a hard time figuring out what drivers to install ( Installed Bootloader drivers ) LiveSuit says no device found. couldn't jump to update mode.
Could you explain more on a step-by-step basis please?

Kodin94 said:
Thanks a lot.
Nu mă aşteptam să-mi răspundă chiar un român.
I'll try reflashing with the LiveSuit app.
LE: Had a hard time figuring out what drivers to install ( Installed Bootloader drivers ) LiveSuit says no device found. couldn't jump to update mode.
Could you explain more on a step-by-step basis please?
Click to expand...
Click to collapse
cum o pun pe boot loader ce combinatie de butoane?

gimivasile said:
cum o pun pe boot loader ce combinatie de butoane?
Click to expand...
Click to collapse
O stingi, ții apăsat pe Vol Down, bagi cablul în ea și după ce bagi cablul ( continui să ții apăsat pe Vol Down ) începi și apeși de vreo 20 de ori Power, nu o să se vadă nimic pe ecran, dar o să o recunoască calculatorul. O să fac un tutorial zilele astea.

Kodin94 said:
O stingi, ții apăsat pe Vol Down, bagi cablul în ea și după ce bagi cablul ( continui să ții apăsat pe Vol Down ) începi și apeși de vreo 20 de ori Power, nu o să se vadă nimic pe ecran, dar o să o recunoască calculatorul. O să fac un tutorial zilele astea.
Click to expand...
Click to collapse
Hi all,
Note: I know we're all here from the same country but please use english so we can have a common ground for everyone, especially for people using the search function.
The good stuff:
Latest LiveSuit 1.09:
http://199.91.152.174/fl30alaby5gg/9cyn6r82vikvs96/LiveSuitPack_v1.09.rar
Latest STABLE release: LiveSuit 1.07:
http://www.softpedia.com/get/System/System-Miscellaneous/Live-Suit-Pack.shtml
How to use it:
The Evotab FUN shares striking similarities to another tablet, the Allview AllDro Speed S.
There is a section for software upgrade instructions for this tablet that should help you:
http://allview.ro/produse/tablete-pc/lista-tablete-pc/alldro-speed-s/descriere/update-de-software-alldro-speed-s-android-40426102012/
Hope this helps.
Regards.

Does anyone here know how to get recovery mode on Evotab 3?

Hi there!
Unfortunately the only possible recovery for a Evolio tablet is getting rid of the piece of ...
I gave mine away, for free, and moved to something better documented and supported by the dev community (mt6577 cpu).
Evolio makes appliances, like a fridge or cofee maker, not Open-source developement driven tablets...i sincerely have a lot more customization options on my 20yo motorcycle then i ever had on their product.
At 5 year warranty they officially announce there will be no updates for it AND refuse to supply the original ROM. img... plus the bullsh.t reasons like: it's not compatible with JB or my favourite "we don't supply the original installation image because we don't want you to break your tablet" :banghead:
... i'll buy another Evolio tablet when they'll come as cereal boxes gifts
Sent from my MB526 using xda premium

i can't entre in fastboot mode :(

i can't entre in fastboot when i instaled the ics port ... thr rom i not fully working so i would th gb roms ... i trued to downgrade ... installing omap4boot ... but i can't entre in fastboot ... when i unplug the battrey and press vol up and conect usb cable .my pc detect the phone but quikley it deconect the action sycron all the time..fastboot isn't stable plz help
bro

you need to update drivers .
open device manager ,, start menu --> search --> ''device manager''
now when you connect the phone without battery you will see a device appears for about 3 seconds ,, in these three seconds do a fast right click on it .
then choose ''update driver'' ,, ''scan my computer.....'' ,, now choose the folder (----/omap4boot/usd_drv_windows) ,,
it will give it an error just select ''install this driver any way'' .
Good Luck .

OS_Hacking said:
you need to update drivers .
open device manager ,, start menu --> search --> ''device manager''
now when you connect the phone without battery you will see a device appears for about 3 seconds ,, in these three seconds do a fast right click on it .
then choose ''update driver'' ,, ''scan my computer.....'' ,, now choose the folder (----/omap4boot/usd_drv_windows) ,,
it will give it an error just select ''install this driver any way'' .
Good Luck .
Click to expand...
Click to collapse
i can't ... i tried many times ... can i flash a zip via recovery to fix this ... ? any other solution plz?

AW: i can't entre in fastboot mode
Which os (windows etc.) Do you use?
Sent from my LG-SU760 using xda app-developers app

hello guys, pls help. am able to install the fastboot and boot into it....but when my phone gets into fastboot, the pc does not find a driver for it. I have tried all the LG drivers from the LG website but they dont work. someone pls share the correct fastboot driver for su760

Depending on what guides you guys are using and what operating system you're using the steps are different.
The OP's issue is downloading the OMAP4430 drivers and manually installing them through the device manager when the device pops up upon connecting your device without the battery.
As for the person above this post, it seems like you need to install the LG COSMO drivers.
Both of you can find the drivers in the latest version of wkpark's bootloader.
Sent from my LG-P920 using xda app-developers app

Hi all. I got the same issue. Can't boot into fastboot, only flashlights are on, nothing else tried to reinstall all drivers - nothing

ok, please please some help me.
When i install the custom rom (3dmax ported from 920), i lose the imei and network.
but when i revert to the korean stock gingerbread, everything comes back to normal.
Now with the stock, some USSD features dont work properly, like when I dial *335# (i dial this to subscribe for an internet bundle), there is a menu that should pop up with 5 options like this:
1. blablabla
2.blablabla
3.blablabl
etc
so with this korean rom, am only able to see option 1, the other options are hidden and i cant scroll down. I think this is a dialer issue. even the fonts look like a noob was typing them with an old typewriter coz the fonts are not centered nor justified (microsoft word jargon).
So if someone can show me how to replace the dialer with the one from the custom rom, or point me to a stock ICS rom for the su760, not ported one please, I dont need any customized or fancy roms, just a stock rom that should make the phone work like a normal phone.

kachmul2004 said:
ok, please please some help me.
When i install the custom rom (3dmax ported from 920), i lose the imei and network.
but when i revert to the korean stock gingerbread, everything comes back to normal.
Now with the stock, some USSD features dont work properly, like when I dial *335# (i dial this to subscribe for an internet bundle), there is a menu that should pop up with 5 options like this:
1. blablabla
2.blablabla
3.blablabl
etc
so with this korean rom, am only able to see option 1, the other options are hidden and i cant scroll down. I think this is a dialer issue. even the fonts look like a noob was typing them with an old typewriter coz the fonts are not centered nor justified (microsoft word jargon).
So if someone can show me how to replace the dialer with the one from the custom rom, or point me to a stock ICS rom for the su760, not ported one please, I dont need any customized or fancy roms, just a stock rom that should make the phone work like a normal phone.
Click to expand...
Click to collapse
Do what i did: download stock ICS rom V28b KDZ! Flash it in lg kdz updater - i will get your imei back, working ussd and stock lgs ICS. Links are in android developement

TheFirlen said:
Do what i did: download stock ICS rom V28b KDZ! Flash it in lg kdz updater - i will get your imei back, working ussd and stock lgs ICS. Links are in android developement
Click to expand...
Click to collapse
I need for su760, not 920....I cant find the link for it.

kachmul2004 said:
I need for su760, not 920....I cant find the link for it.
Click to expand...
Click to collapse
U can try flash this: http://forum.xda-developers.com/showthread.php?t=1956347 i flashed this too but i lost imei so watch out

[q] rom - huawei ascend y210d (y201-0200)

Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something

cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
http://www.android-hilfe.de/root-cu...nmod-10-1-u8666e-entwicklung-eingestellt.html

a ROM for Huawei ascend y210-0200
to all developers out there someone plz help me on my huawei ascend y2010-0200 phone coz it crashes all of my system app and user app .. i cannot open my phone and stock on logo .. plz help how to recover and repair my phone .. huhuhu T_T

Can you enter recovery mode?
Via [email protected]

same device
IceTe said:
Can you enter recovery mode?
Via [email protected]
Click to expand...
Click to collapse
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help

cilig said:
Hey, can someone tell me if i can find a rom for huawei ascend y210d (y210 - 0200)? and a link if is posible.
I have now a viettel rom and is not working very fine, is crushig, i need a new rom pls somebody... a link or .... something
Click to expand...
Click to collapse
https://www.dropbox.com/s/xcmmed4kmn90lry/Y210D stock firmware B869.7z?dl=0
here you are bro my CWM backup of version B869 for Y210D..Also here bro is my other things dumped stock recovery img for this phone flash it with fastboot https://www.dropbox.com/s/a2pltlxuse3sfpo/recovery210d.img?dl=0 also here are my bro adb and fastboot drivers for huawei if this ones dont work just install with kingoroot https://www.dropbox.com/s/37mn5bnkkg4fuh6/Huawei-ADB-FastBootdrivers.zip?dl=0
And use minimal adb and fastboot to do flashing with fastboot..To go into fastboot mode use this first disable fastboot in settings then turn off phone.remove bat,after 5 sec reinsert bat and then turn on phone and when huawei shows release power button and press and hold volume down for 10sec-whatever you think best then connect to pc phone with usb cable and to go to recovery do "adb reboot recovery" from adb or just do same as for fastboot but with pressing volume up instead of volume down button or power up with holding both power and volume up i really dont know but somehow figured out.But before all you know for sure that when youre restoring cwm backup you need to put into "sdcard/clockworkmod/backup" folder from that zip file when you unpack it you will find this folder with date in name and just put it there..And then before doing restore make sure you did wipe data,wipe catche,dalvik catche and format only sistem partition..Here is also https://www.dropbox.com/s/jygfnjygepl2jzd/cwm-oneclick-install.zip?dl=0 cwm recovery for this device

engineeravp said:
Hi. Have the same device. But it's almost dead. No recowery((. ( Was updating via update.app on sd card but missed the sing that it's for my modification of model.
So now it's just flashes lights and connects too PC as some two ports. One is in download mode I think, QPST telling so.. athor I think for some backups.. But I don't know what to do about this ports.. even can't find native firmware.
Simple question is. can I somhow install recowery thru update.app file? Phone is still processing this file, becouse it creates update.log, but with error (maybe if original fw then it just helps, but I still can not find it) or where I can download or even buy native firmware updater?
Maybe is some software that can help thru PC? QPST is powerfull but I miss much knolage(((((((((
Appreciate help
Click to expand...
Click to collapse
i got the same problem. is there any solution by now? please help..

[Resolved] [Q] [HELP] Is my MTK6589 phone hard bricked ?

EDIT : SOLVED :
Many thanks to slot78
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.

Hello!
I think i can help to you! Send me a private message and tonight i will message back with the sollution...just i working now.
kaceps said:
Hello all.
I got my hands on a Inew I2000 phone (Mediatek 6589 cpu). I tried to flash it with the latest rom, and might have hard bricked it. Can you help me say if it is indedd hard-bricked, and if not how to revive it ?
What I did :
I used Flash Tool 3.1312
Got the rom from this page : http://www.needrom.com/mobile/inew-i2000/
After fighting with the drivers for a while, it seems my phone is ready to flash.
I selected the scatter-loader, cliced "firmware upgrade"
Pluged the phone.
The upgrade seemed to work fine. I got to the green circle. I unpluged phone. But hte phone didn't boot.
After that, nothing.
The phone doesn't seem to reac to anything. The screen stays black.
When I plug it, the list in device manager moves a bit ( showing that it still react to pluged USB) But I can't find the device anywhere on the list.
When I try to flash anything with flash tool, I clic load. Then, when I plug the phone, the loading start. But when the red bar reach 100%, nothing more happens.
From what I've found with google so far, it looks like I somehow had the wrong pre-loader in my ROM.
Now, I'm opened to suggestions.
Any way I can be sure wrther my phone is bricked or not ?
If not, what is the next step to revive it ?
Thanks in advance for any help.
Click to expand...
Click to collapse

I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards

I haven't succeded (yet) but thanks a lot for the info.
I think I got the right point on the motherboard. When I connect it, I can see a white led lightning up near the ubs port on the phone. So, I guess connecting the point makes my phone react.
But I think I might have a driver problem now.
Here is what happened.
Launch Flashtool as admin.
Load a scatterfile (any file, at this point I just want to be able to flash anything.)
Battery in, usb cable connected
press load.
the red progress bar imediately reach 100%
I try to connect he testpoints.
nothing more happens. Sometime I see various errors, not always the same.
Before finding the test point method, I tried all kind of drivers. Now I'm not sure which one is left on the system or wich is the correct one.
Anyway thanks for pointing the test points to me !
Also, thanks for the recovery and the ROM.
But none of them contains a preloader / scatter file. So, at this point, even if I get the right drivers I can't load them. I'll try them later if I manage to revive the phone, but right now my aim is ...
1 / Cleanup the drivers, and reinstall the right one
2 / Get flash tool to load anything on the phone via test point
3 / Find the right preloader and load it via test point
If I manage to do that, then I should be able to put back the back cover, and load the recovery "normally".
In the meantime, any advice is highly welcome.
Like :
- Any tips for cleaning up / installing drivers ?
- Any idea what the right preloader is ?
- Precise order on what to plug when flashig ( Battery / plusg USB / Load in flashtool / Connect points ? )
But more than eveything, thank you ! I might not have succeded yet, but at least I am not stuck anymore. Before your post I didn't know what to do. At least, now I have the test point and I can try something.
Also, sorry for the late answer. I had a lot on my plate, and didn't realise you had answered.
I suscribe to be sure not to miss any more answer.
Skot78 said:
I answer here,ok? Important info...
As you say in pm, yes the sollution the "test-spot"!
You have the truth!
http://www.4shared.com/download/5Y4TKOCfba/service_spot__1_.jpg?lgfp=3000
There is the spot!
You need to remove the back cover and you need 3 item: a piece of wire, a screwdriver (fot the back cover) and a rubber-ring.
First remove almost all the screw, except next to sd card slot (bottom left corner of the sd card slot)...This screw fix the main board and you can remove the back cover without remove this screw.
Put the battery to right position and fix it with rubber ring to the phone.
Prepare with the flash tools and rom, for flashing...(usb cable conect to the pc, scatter file etc...)
Start the flashing with the downlad button and inmediatly sort the spot with the motherboard screw (what you didn't remove) with the wire.
Waiting for the green circle! And Enjoy!
Pls let me know if you successful!
The problem was i think...There is two different mainboard in Inew i2000 the v1.1 and the v2.1...The newer stock roms belongs to second.
Here is a KitKat THEMED (it's just 4.2.1) rom: http://www.4shared.com/zip/WHdOpLytba/07_resurrection_feelKat.html
(little bit lightweighted and optimized) It's for PCB v1.1
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Here is the lastest CWM based touch recovery
http://www.4shared.com/file/3qNEh_3Vce/recovery.html
Best Regards
Click to expand...
Click to collapse

Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards

Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Skot78 said:
Hello Again!
For the recovery you do not need new scatter file, use the original.
You can install the new rom from CWM recovery.
So let's see the problem.
First i need that error messages, it's important!
Try to use different usb cable/usb port/computer (operation system).
And different version of Flashtools.
I use this:
http://www.4shared.com/zip/CBA1yGcq/SP_Flash_Tool_v313040119.html
And this drivers:
http://www.4shared.com/zip/TPj497mj/6577driver_install_3_steps.html
But i need the error codes...Meanwhile you can contunie trying. We will save that phone!
Best Regards
Click to expand...
Click to collapse

kaceps said:
Thanks again.
I'm already using this version of Flashtool. I'll try your drivers as well.
I might have some more question later on, but for now I think I need to try again when I've slept a bit. Maybe things will seems clearer tomorow I'll keep you updated later this week end.
Click to expand...
Click to collapse
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot

Skot78 said:
Okay, keep me in touch! I will help if i can!
And will check de error codes pls!
Skot
Click to expand...
Click to collapse
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
EDIT ;
YES ! Phone résurected !
What I did :
phone not pluged, test points already connected
Windows -> write memory.
Go to tab Write memory
Open raw data -> select preloader.bin
select EMMC
Adress 0x0000000000
length 0x00600000
Write
Plug phone (with test point already connected)
The prelaoder gets written -> green circle.
unplug phone
After that back to main tab
select scater file from the same image, clic firmware upgrade
connect phone
Loading goes through ...
Green circle,
Phone switch on -> Success !
Thanks a lot, I will now try to flash the CWM recovery and the rom you recommended ... but later.
Right now my phone can boot again, and that's awesome !

kaceps said:
Quick update.
On device manager, the phone appear under "Ports com and LTP" as "MTK USB Port (com12)" Or other port number if I use other USB ports.
The error message I sometime get is BROM ERROR : S_PORT_COM_OPEN_FAIL (1013)
[COM] Failed to open port COM12
Wether I get the message or not depends on the order I do thing. ( Plus phone first, load after, or load and plug after ...)
So far, same reaction as always. The red progress bar goes to 100% very quicky, then nothing more happens.
Click to expand...
Click to collapse
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...

Lol, you must have answered while I was editing my post.
As I said, Phone resurected ! Success !
It is now booting normally, with a stock rom.
Next steps are
1 / CWM + the rom you suggested.
2 / Fix memory to use the whole memory on one system partition. (It seems the i2000 for some reason does not use all the available memory.)
But all that is not problematic anymore. I just need the time to get to it
Many thanks for your precious help, I wouldn't have been able to do it without you.
Skot78 said:
Yikes!
Looks like, there is only usb driver related or op system related problem. (for this moment)
I looking for different driver and give it a try.
tonight...
Click to expand...
Click to collapse

Aswome!
Congratulations!
http://www.4shared.com/mobile/C4f0jQeEce/meteos-mtk6589-rom-edit-8gb-16.html
It's an apk for repartitioning your memory! Use only maximum 1,5 GB system memory options!
After that you must reflash the rom of course and your internal sd will cleared too!
But not the cwm recovery!
I'm happy now!

Get the 2.7 GB of memory on one partition ... OK
Get more available memory ... nope. Not sure it is actually possible on my version.
CWM ... OK
insall the kitkat themed rom you gave ... I don't know.
Skot78 said:
First time do not going to panic...First time boot will be slow...and after that the system need 15 min for find myself...Wait for it!
Click to expand...
Click to collapse
How long exactly ? Because I think the 4 color moving logo has been displayed for 15 minutes now.I know first boot can be long ... but at what point do I decide the phone is not just slow booting but actually stuck ?
Edit : Well, I'll stop at 30min I think.
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.

Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium

kelvinvalencio said:
Hardbricked mtk6589 device,i more like to live dangerously ,but serious,i never hardbricked my device,i have softbricked my sgy when i was trying compile my custom kernel XD
Sent from my N986 using xda premium
Click to expand...
Click to collapse
Well, depends on what you call hardbrick and soft brick.
I bricked it using only software. So, it's soft.
But I had to open it and attach a wire to the motherboard to unbrick it ... so kinda hard to.

kaceps said:
But even if this one doesn't work for me, I would be interrested to know where you found custom roms for inew I2000 phone. I haven't been able to find a single one with google.
Click to expand...
Click to collapse
Eh it's will be difficult, you know i customized that rom... Because i did not found too. It was not a really rom develpoment just kind a "patchwork"...
The problem is, you have (i think) v2.1 board in your Inew I2000...In Hungary...one company sold v1.1 verzion...it called "Myaudio 508"...
For the v2.1 i have only stock rom...
But i did only few imporvements....Working GPS (with hw modding too) not blurry cam (hw too) different launcher, customized bootanim, different (and less) system ringtones and notifications. Some build.prop tweaking...etc...etc...
I try to make 4.2.2, because i have a working version, but still have two bugs, but that harder bugs and my phone sadly dead.
http://forum.xda-developers.com/showthread.php?p=50010654
My motherboard have a contact issue and i cant find replacement anywhere...I asked chinese factories...i asked russian fans...nothing
I'm a sad panda now...And looking for new phone...There are few new very intresting phones!
But if you want ask anything...just do it! if i can, i will help..

Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?

Japetas said:
Is it possible from battery date 2013.02.25 and green sticker below battery with 2013 05 checked to tell which exactly preloader I need for this bricked phone (quad core)? I tried various sp flash tools versions and various roms dated 2013 03 16, 2013 05 10, 2013 07 06, tried to download only preloader or full rom with variuos errors, usually 4001 and 4032, now only shortening the point method left, but how do I know which exactly preloader I neeed?
Click to expand...
Click to collapse
You shold check the motherboard version number...Already i know two versions of this phone...The v1.1 and the v2.1...
For the flashtools the firmware names contain "_21" or "_v21"...In previous posts i linked a v21 rom. If you need the older one...i don't have v1.1 rom for flashtools now (because my phone is dead) but you can use the "spot method" and cmw rom + zip firmware form.
Best Regards

Inew I2000 Brikado
Inew I2000 5.7, Mtk6589, 8G. Updated the ROM and correct at all right Flastool plus the smartphone does not turn on and no battery carrega.Vi not the other members had the same problem.

Preciso de ajuda Inew I2000 brickadi
aloizo celso alves cardos said:
inew i2000 5.7, mtk6589, 8g. Updated the rom and correct at all right flastool plus the smartphone does not turn on and no battery carrega.vi not the other members had the same problem.
Click to expand...
Click to collapse
alguem pode me ajudar?
Fiz a atualizacao de rom do inew i2000 5.7 8g com flastool e correu tudo bem, vermelho, rixo, amarelo e verde ok., agora o smart nao liga esta brickado.
Por favor me explique como fazer o metodo de teste da placa mãe, onde tenho que fixar o arame?

Im partition my 8 gb sd card into 6gb 2gb . I want to repartition that is i want to recover my sdcard fully 8gb that is single 8gb . What can i do?? Thanks in advance..
Sent from my GT-S6102 using XDA Free mobile app

problem boot loop root fail

Hello and thank you for those who will try to help me.
I tried to follow a tutorial to root my one plus 8 pro android 11 last night. So I followed several youtube tutorials. only I put a rom which was poorly optimized. The wifi didn't work. So trying to do everything I went to the developer settings and I disabled the usb debugging which is important for the future. So not knowing enough the basics in root I wanted to unroot my smartphone, and I went to the magisk manager and I click on uninstall (I did not uninstall the app but I click on uninstall in the magisk manager). I do not know if the smartphone restarts but it does not matter. I then check if the wifi works, nay, I looked using the root checker if the smartphone was still root, and it is marked that the smartphone is not root which is normal since I have it unroot. In a wind of panic I therefore wanted to do a factory restart by deleting everything (which is silly). So I went to the bios (the menu when you press volume down + on / off button) I clicked on delete wipe data, I also delete the data etc ... When restarting the smartphone takes time , I tell myself that it is normal, then black screen, then it restarts, then again black screen, then I panic. Fortunately, I manage to go to the smartphone's bios by some manipulation (when the screen goes black I can press the on-off button for a long time and a classic android menu appears with marked turn off and restart, when I select turn off the smartphone turns off and I can therefore turn it on again with the low volume manipulation + on / off button which redirects me to the bios) once in the bios I can go in recovery mode or in fastboot mode. So I tell myself that I can try to flash my one plus with the stock rom (original) but I don't know which version to take and if it matters. I can't find the original rom on the official one plus site (as is the case for xiaomi from what I saw on a youtube tutorial). THE question I am also asking myself is if I will be able to flash it while, as I said previously, I have disabled the usb debugging.
If qlq would have the solution or if someone knows someone who could help me, that would be of great help to me.
thank you to those who have read my pad, I may be explaining the problem poorly, do not hesitate to ask me questions to better understand my problem in order to better resolve it.

bixdab said:
THE question I am also asking myself is if I will be able to flash it while, as I said previously, I have disabled the usb debugging.
Click to expand...
Click to collapse
Flashing a properly signed Stock ROM can get achieved by Fastboot method - where it doesn't matter whether Android OS is boolooping or not.

Comment restaurer de 0, débricker ou downgrader son OnePlus - Smartphones OnePlus - Phonandroid.com
Un grand merci à Some_Random_Username pour les fichiers unbrick, et à Zayatoshi pour certains compléments d'infos Source : XDA ======================================================================================================================================== Avertissement : Cette...
www.phonandroid.com
i found this and it works.