Related
Hello
i tried to flash my prophet with a portuguese rom with wm6
Now prophet is in bootloader mode and i can't do nothing
what can i do?
i tried
NVID_RUU
and it doesn't update
Go back to a WM5 Rom.
i already done that
but i still can't update for a rom with wm6
i have
ipl 2.15
and
spl 2.20
it's a g4
You must read about SoftSPL or HardSPL - Than you can flash a WM6 Rom.
How to do
1. Instala a Rom original do teu aparelho existe o link ai no site.
2. Faz um update a rom com a do pda mobiz (updaterom) é o nome do ficheiro.
3. Faz o hardspl g3, é o mais habitual mas vê no teu aparelho.
4. Instala a nova rom com a g3 ou g4 (RUU) update utility.
Se tiveres dúvidas diz ok, um abraço.
deltav13 said:
1. Instala a Rom original do teu aparelho existe o link ai no site.
2. Faz um update a rom com a do pda mobiz (updaterom) é o nome do ficheiro.
3. Faz o hardspl g3, é o mais habitual mas vê no teu aparelho.
4. Instala a nova rom com a g3 ou g4 (RUU) update utility.
Se tiveres dúvidas diz ok, um abraço.
Click to expand...
Click to collapse
can you write / translate this in english please ?
I have the same problem with my prophet and need some instructions to flash
thx in advance
How to do
Charge your device for 2 hours first.
Second enter boot loader mode 3 colours by pressing the com button on the left side of the device, wait.
1. Install the original rom
2. Do a update rom use pda MOBIZ STEP 2 update rom file wait...
3. After do a hard spl G3 or G4 depends on your device.
4. Wait until the device enters again into boot loader mode.
5. Install the new Rom and wait for the device to reeboot.
6 If all goes well you can now use WM6.
i already solve this
thanks to all
deltav13 said:
Charge your device for 2 hours first.
Second enter boot loader mode 3 colours by pressing the com button on the left side of the device, wait.
1. Install the original rom
2. Do a update rom use pda MOBIZ STEP 2 update rom file wait...
3. After do a hard spl G3 or G4 depends on your device.
4. Wait until the device enters again into boot loader mode.
5. Install the new Rom and wait for the device to reeboot.
6 If all goes well you can now use WM6.
Click to expand...
Click to collapse
OK, my problem is bigger than this. I can get to the CMONEX page but no further; just hangs there. ALSO, active sync won't connect; tries to but gives up.
The problem? I installed a custom ROM off ppcgeeks.com; it seemed to work well, then it started doing funny things, like not allowing me to access pages; giving me errors messages, etc. I did a soft reset; it hung on the 1st page showing Touch Diamond. Also, won't sync. Did a hard reset (the only way that works for me is to soft reset, quickly press power + vol down while flipping the phone over until the Cmonex page comes up).
Phone hangs there; can't sync it with PC (xppro) anymore (no problems before).
QUESTION: is my phone effed?
Ok, well I've read every thread I can find and have attempted many things to get this resolved with no luck. I have a G2X which I made a full backup of using CWMod before sending it back to LG for repair. It came back with 2.3.3 (I had 2.2 before). Now, I can't root because the Super One Click doesn't work and I can't get CWMod to work to enable me to restore the old ROM (or one of the new rooted ones provided here on XDA for just this purpose). When I reboot the phone with the power and volume-down buttons held, it boots into the "new phone" mode, not a recovery console that I was expecting so I could restore from ROM. So how do I restore from ROM when the CWMod doesn't run properly (because it needs root privileges)? I really just want to drop that 2.2 ROM back on my phone with all my apps, saved stuff, etc. Help anyone?
did you try the latest One Click NVFlasher for CWM 5.0.2.0 method?
are you still able to get to the "Please wait S/W update" screen?
Trying this now... fingers crossed...
Thanks!
HI!!!!
Perdona por escribir en español pero googleando encontre solucion para hacer root al lg g2x con gingerbread 2.3.3 y se trata de esta .zip la instalas desde clockwork recovery y listo!!!! espero haberte ayudado aunque un poco tarde quizas ... saludos desde guatemala ...---
h t t p : / / w w w . m e d i a f i r e . c o m / ? 9 2 q p r 5 2 5 z t b l h 8 w
wyldkard said:
did you try the latest One Click NVFlasher for CWM 5.0.2.0 method?
are you still able to get to the "Please wait S/W update" screen?
Click to expand...
Click to collapse
How did you get windows to recognize the APX driver once you plugged in your 2.3.3 based G2x? Ever since I bought my G2x preloaded with gingerbread, the new APX driver request installation does not even pop up. Is there another way to force install the APX driver without having to wait for windows to recognize it, go into device manager, manually locate folder with drivers, etc... ?
Hi, I do not think there is a way to do it other thanthe manual installation. Also I have gotten CWM with the NVFlash method then rooted using update.zip but after this any Tom I flash just bootloops :/ anyone know what I'm doing wrong?
ayuda flashee una rom diferente en mi lg g pro 2 y ya no enciende,con flashtool,no enciende ni en modo download ni nada,ni siquiera instala controladores,ayudenme se los agradeceria mucho.........
help meeee
como revivo lg g pro 2 ya no enciende nada ni la pc me reconoce,ayuda please,
Siga el webiste y descargar el archivo kdz.
http://www.lg-phones.org/official stock-lg-g-pro-2-tot-firmware-rom.html
A continuación, utilice la herramienta de LG Flash para flashear el archivo a su teléfono.
Yo no sé español, pero utilizando Google Translate para transmitir este mensaje. No sé y no puedo entender su situación exacta, pero podría ayudar.:good::good::good:
thank you very much friend, but do not turn on the screen, or let me install drivers, what happens is that I put a rom with flashtool the f350 model when mine is D838, and not returned to light, quite appreciate your help, many thanks and greetings from mexico
oprink said:
thank you very much friend, but do not turn on the screen, or let me install drivers, what happens is that I put a rom with flashtool the f350 model when mine is D838, and not returned to light, quite appreciate your help, many thanks and greetings from mexico
Click to expand...
Click to collapse
Hey,
Please answer as much as possible:
1) Can you see the LG logo ? (when starting up. Try on full charge)
2) Can you get to the download mode ?
3) did you download the kdz file ? (follow http://www.lg-phones.org/how-to-flash-unbrick-lg-g-pro-2-with-a-kdz-firmware.html
4) if you can install using kdz method it will be much easier as the software does all the work . So install all the tools mentioned in the site and see if it can detect the phone.
All the best :good:
EDIT:
Step 1: Enter Download mode (You should be able to enter by pressing Volume Up + Power key. hold for 15seconds)
Step 2: Download kdz file for your model
Step 3 Use LG Flash Tool 2014 (Works 100%)
Follow http://forum.xda-developers.com/showthread.php?t=2797190 in detail.
I tried it.
roykulkarni said:
Hey,
Please answer as much as possible:
1) Can you see the LG logo ? (when starting up. Try on full charge)
2) Can you get to the download mode ?
3) did you download the kdz file ? (follow http://www.lg-phones.org/how-to-flash-unbrick-lg-g-pro-2-with-a-kdz-firmware.html
4) if you can install using kdz method it will be much easier as the software does all the work . So install all the tools mentioned in the site and see if it can detect the phone.
All the best :good:
EDIT:
Step 1: Enter Download mode (You should be able to enter by pressing Volume Up + Power key. hold for 15seconds)
Step 2: Download kdz file for your model
Step 3 Use LG Flash Tool 2014 (Works 100%)
Follow http://forum.xda-developers.com/showthread.php?t=2797190 in detail.
I tried it.
Click to expand...
Click to collapse
Hello friend, you can not see the logo or turn on the screen, I do not even charge when connected to the pc does not recognize my drivers, I just put something like qualcomm, devices
Hello my friends;
i tried to root my infinix zero 8 with magisk ; i unlocked the phone and i patched the boot.img but the phone now give orange state ''your device is unlocked and not trusted'' and the phone keep rebooting
i tried to flash the boot.img via SP flash tools but my PC now cant detect the phone because of the continuous rebooting.
i tried to use the volume up +power button but this fail too.
i can't get to fastboot to flash the phone..
please i'm deseperate and i really need your help.
Just flash your stock ROM and stock recovery back, you should always do a backup before attempting to flash anything.
XDHx86 said:
Just flash your stock ROM and stock recovery back, you should always do a backup before attempting to flash anything.
Click to expand...
Click to collapse
How can i flash it without PC !!!!
Turn off the device then press volume up while connecting the device to your PC. It should boot to fastboot, if it doesn't then it's most probably that you flashed the wrong boot image or didn't follow whichever guide you were following precisely.
If that's is the case then you can follow this guide to solve your bootloop.
Briefly:
Turn off your phone for at least 10 mins.
Restart your phone into recovery either by volume down - power button combination or volume down usb connection combination.
Select wipe data/factory reset.
If you have custom recovery then try wiping dalvik cache before wiping all data.
Wiping data doesn't remove your custom ROM nor remove your custom recovery. But it will remove root.
Never panic while doing anything to your device. There is always a solution to whichever problem you may face.
Lastly should you find it difficult to do anything of the above mentioned then take your device to a service center.
XDHx86 said:
Turn off the device then press volume up while connecting the device to your PC. It should boot to fastboot, if it doesn't then it's most probably that you flashed the wrong boot image or didn't follow whichever guide you were following precisely.
If that's is the case then you can follow this guide to solve your bootloop.
Briefly:
Turn off your phone for at least 10 mins.
Restart your phone into recovery either by volume down - power button combination or volume down usb connection combination.
Select wipe data/factory reset.
If you have custom recovery then try wiping dalvik cache before wiping all data.
Wiping data doesn't remove your custom ROM nor remove your custom recovery. But it will remove root.
Never panic while doing anything to your device. There is always a solution to whichever problem you may face.
Lastly should you find it difficult to do anything of the above mentioned then take your device to a service center.
Click to expand...
Click to collapse
Thank you for your answer, but the problem that i can't turn off the phone even when i use button combination; it's always rebooting until it get discharged
Do you have any other way to get to the recovery page or to stop this rebooting !
You can follow this thread.
One of the posts there says:
Hold Vol down and power for soft reboot. As soon as the screen goes off to reboot quickly switch to recovery combo (bixby + up + power) it should boot to recovery
Click to expand...
Click to collapse
Your recovery combination should be volume up + power.
Another says:
I managed to fix my phone. After leaving it for 24 hours the battery was fully drained. After charging again i could boot to twrp and restore my nandroid backup.
Click to expand...
Click to collapse
Here you can also drain the phone and leave it, then press volume up while connecting the usb.
Either of them should work with your situation, as they both have the same circumstances as yours.
The main point of what I just said, is to either get your phone to soft reboot or completely drain the phone from charge and try booting to recovery again.
XDHx86 said:
You can follow this thread.
One of the posts there says:
Your recovery combination should be volume up + power.
Another says:
Here you can also drain the phone and leave it, then press volume up while connecting the usb.
Either of them should work with your situation, as they both have the same circumstances as yours.
The main point of what I just said, is to either get your phone to soft reboot or completely drain the phone from charge and try booting to recovery again.
Click to expand...
Click to collapse
OK thanks ; i will tri this and send to you a feedback
MrMonti said:
OK thanks ; i will tri this and send to you a feedback
Click to expand...
Click to collapse
Hello guys,
I tried every thing you said but nothing works!! the phone still always rebooting , even after the battery is completly drained when i connect the charger it start rebooting again , and the PC still not detect the phone!
Do you have any other solutions pleasaaaase
MrMonti said:
Hello guys,
I tried every thing you said but nothing works!! the phone still always rebooting , even after the battery is completly drained when i connect the charger it start rebooting again , and the PC still not detect the phone!
Do you have any other solutions pleasaaaase
Click to expand...
Click to collapse
Unfortunately friend you have no more options left. You have to send it to an authorized service center.
They will fix this issue for you, leave this matter to the professionals and don't further complicate things by messing with your device unnecessarily.
MrMonti said:
Hello my friends;
i tried to root my infinix zero 8 with magisk ; i unlocked the phone and i patched the boot.img but the phone now give orange state ''your device is unlocked and not trusted'' and the phone keep rebooting
i tried to flash the boot.img via SP flash tools but my PC now cant detect the phone because of the continuous rebooting.
i tried to use the volume up +power button but this fail too.
i can't get to fastboot to flash the phone..
please i'm deseperate and i really need your help.
Click to expand...
Click to collapse
i had that exact same problem. what you need to do is open up the back and disconnect the battery. then i hope you have all its usb drivers installed, if not install them. then you need to use this https://github.com/MTK-bypass/bypass_utility you can also look at some guides on youtube on how to set everything up as the github guide aint all that specific. then run that main.py and while holding, if i remember correctly, volume down connect the phone without battery being connected. after some tries it should say sth along the lines of protection disabled or sth and then without disconnecting flash your rom using sp flash tool. that worked for me. and also dont be put off if that bypass tool doesnt work on the first try. it took me like atleast 30 tries to get it working.
hope it helps
kusti420 said:
i had that exact same problem. what you need to do is open up the back and disconnect the battery. then i hope you have all its usb drivers installed, if not install them. then you need to use this https://github.com/MTK-bypass/bypass_utility you can also look at some guides on youtube on how to set everything up as the github guide aint all that specific. then run that main.py and while holding, if i remember correctly, volume down connect the phone without battery being connected. after some tries it should say sth along the lines of protection disabled or sth and then without disconnecting flash your rom using sp flash tool. that worked for me. and also dont be put off if that bypass tool doesnt work on the first try. it took me like atleast 30 tries to get it working.
hope it helps
Click to expand...
Click to collapse
but in my case i had literally 0 signs of life, so i was even worse off than you and i got it unbricked like that today
MrMonti said:
How can i flash it without PC !!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello i got infinix zero 8 but i cant unlock it my pc cant read it after booting to bootloader and my pc said: Waiting for device how did you unlock your bootloader?
Jericho.sambile said:
Hello i got infinix zero 8 but i cant unlock it my pc cant read it after booting to bootloader and my pc said: Waiting for device how did you unlock your bootloader?
Click to expand...
Click to collapse
Hi , i tried everything but nothing works.
So i took my infinix to the after sale service and they repaired my phone.
It's the safest way.
Good luck
kusti420 said:
i had that exact same problem. what you need to do is open up the back and disconnect the battery. [...]
Click to expand...
Click to collapse
I F*** my system trying to do TWRP with the wrong ROM , unfortunately I ended up killing "Boot.img" and "Recovery.img". I'm a few weeks looking for help from any UNBRICK, but that doesn't happen.
Finally, I understand that there really is no way to proceed without opening the back and removing the battery plug.
# I'm thinking about the best way to proceed with this, all I did was this:
All drivers mtk
SP drivers
bypass
brom.bat
libUSB (MediaTek_USB_Port)
OPPO
python
it's all unlocked, but i didn't root. I downloaded firmware: X687-H851D-Q-OP-210705V513
"SWD AfterSales" seems to work, however SP Flash Tool is universal...
KEEP CALM!
Spoiler: End happy :)
[PT-BR]: language in portuguese... [I ask someone to translate to English, thank you]
UnBrick do iz8
Leia tudo antes de sair fazendo!
Você vai precisar instalar algumas coisa no seu Pc, é simples e rapidinho;
- All drivers mtk
- SP drivers
- bypass (brom.bat)
- libUSB (MediaTek_USB_Port)
- drivers OPPO (se não reconhecer, instalar)
- python 3.7 ou superior se conseguir
Se lembre que é fazer flash igual com qualquer outro Android que usa SP Tools, não tem segredo, nem mistério, é bem simples de fazer flash!
Segue esse vídeo do tutorial referente a instalação dos drivers,
tá extremamente bem explicado, mesmo assim há um fórum xda logo abaixo do video, traduza a página e leia - Obviamente você não vai seguir com processo DA, instalando ROM de outro aparelho, sim!?
Continuando...
Agora, chegou a parte sobre o problema "X". Assim como alguns outros modelos atuais Android, por segurança tem seu pré inicialização bloqueada e por isso ele ficará no LOOP... infinitamente reinicando, tentando entrar em modo Fastboot, recovery, twrp ou os 5 segundos de bootloader, porém já não existe mais essa inicialização do sistema.
Para que você tenha acesso é necessário desplugar o conector da bateria direto da placa, assim quando pedir acesso ao Z8 você poderá dar aceite no processo "Brom.bat". Então o próximo passo é abrir a traseira do aparelho (que é ridiculamente simples) e em seguida a primeira camada de trás — não tudo só até aonde se encontra o plug da bateria.
Como exemplo, veja esse cara desmontando:
Caso não tenha aparelho pra descolar a tampa, esquente sua própria mão as quinhas e laterais do aparelho pra amolecer a cola, faça o mesmo em torno das câmeras, sempre com muito cuidado pra não se queimar :')
Se não tiver os matérias, corte uma lasca pequena de garrafa pet e começamos a remover a tampa traseira indo de baixo para cima e tomando cuidado com GAVETA SLOT SIM e com LEITOR DE DIGITAIS,
TOME EXTREMO CUIDADO NESSA ÁREA, SE DANIFICA O CABO JÁ ERA!
és um dos motivos de porque tem gente que tá vendendo iZ8 sem leitor de digitais funcionando.
Depois de remover todo o necessário com cuidado; faça o processo de FLASH da forma normal com o telefone desligado. Na inicialização do Flash, ASSIM QUE PLUGAR no USB aperte sua tecla de volume "+" e pronto, Será reconhecido no => brom.bat <=
DESMARQUE O PRELOADER, pois pode ser apagado o IMEI, informações importantes OU dados de autenticação
SEMPRE "Download Only", SEMPRE✓
Finalizado, em seguida o SP Tools já pode está iniciando para vossa alegria
Observação importante:
ROM usada foi referente ao que o telefone se encontrava no momento: X687-H851D-Q-OP-210705V513
se não consegui instalar o LibUSB quando estiver no LOOPBoot, conseguirá instalar sem tá plugado na bateria!
Caso precise de algum aquivo de autenticação, ali embaixo do Scatter, procure! O utilizado foi "auth_sv5.auth", vou tentar deixar um link no Gdrive... ✓
coloquei algodões nas cameras se desprotegidas ou sele com fita adesiva até o momento da montagem do aparelho pra não ficar resto de poeira
~ se chegou até aqui, fique ciente de que você não comprou essas Informações, então de maneira alguma cobre para ajudar o próximo!
!
faça tudo com calma, paciência e em um lugar visivelmente limpo e sem risco de poeira, boa sorte!
Arquivos - Google Drive
drive.google.com
*******
Se algo estranho acontecer ou houver algum empecilhos tente isso:
Coloque o arquivo "Checksum.ini" dentro da pasta que esta a ROM (descompactada) e use a versão v5.1924 do SP Flash Tool.
Escolha o arquivo "auth_sv5.auth" em autenticação de arquivo, dessa vez marque só o boot e recovery e flash. Então veja a mágica acontecer!
********
As title says, i tried to flash an official stock firmware to this device as it was running a demo OS on an old android version and wanted to remove the demo from the bootloader. When flashing with ODIN odin crashed and when trying to turn the device back on i just get a black screen.
When i hold power and vol down it will show the boot screen then go to a blue screen for about 1second that quickly says Installing update. with the android logo, then it just goes black as if its powered off. I try to enter recovery, does the same, try to go to download mode does the same, cant enter either it just boots off and goes to a black screen after seeing that blue screen.
Gazz man !!!
Rijaj brian said:
Gazz man !!!
Click to expand...
Click to collapse
huh?
MichaelK18 said:
As title says, i tried to flash an official stock firmware to this device as it was running a demo OS on an old android version and wanted to remove the demo from the bootloader. When flashing with ODIN odin crashed and when trying to turn the device back on i just get a black screen.
When i hold power and vol down it will show the boot screen then go to a blue screen for about 1second that quickly says Installing update. with the android logo, then it just goes black as if its powered off. I try to enter recovery, does the same, try to go to download mode does the same, cant enter either it just boots off and goes to a black screen after seeing that blue screen.
Click to expand...
Click to collapse
Live demo units are not meant to function as normal devices. Most if not all demo units in the open market are stolen/thrown away and missing the cellular modem (meaning no baseband or imei) or have no antennas.
They are locked down (by samsung in your case) for very obvious reasons and as such you won't be getting much help from xda members.
Your only option is to open up that device and replace the mobo with another one (you have all the hardware except an appropriate motherboard). Good luck
MichaelK18 said:
huh?
Click to expand...
Click to collapse
Envolvendo algumas situações também! Mas yeah! Eu(me)
Slim K said:
Live demo units are not meant to function as normal devices. Most if not all demo units in the open market are stolen/thrown away and missing the cellular modem (meaning no baseband or imei) or have no antennas.
They are locked down (by samsung in your case) for very obvious reasons and as such you won't be getting much help from xda members.
Your only option is to open up that device and replace the mobo with another one (you have all the hardware except an appropriate motherboard). Good luck
Click to expand...
Click to collapse
Yeah that makes sense i guess. But yeah i work in retail and they were going to be thrown away, old demo units that got lost within the stockfile samsung, lenovos, etc., half of them got thrown away some were smashed etc. and i took the other hoping to just use it for my broithers kid its no big deal since it cost nothing was just wondering if there was a workaround to it. since this never happened to me before
MichaelK18 said:
Yeah that makes sense i guess. But yeah i work in retail and they were going to be thrown away, old demo units that got lost within the stockfile samsung, lenovos, etc., half of them got thrown away some were smashed etc. and i took the other hoping to just use it for my broithers kid its no big deal since it cost nothing was just wondering if there was a workaround to it. since this never happened to me before
Click to expand...
Click to collapse
Serious .isso e culpa tua brash agiste de cabeça quente mantem te calmo porque ja esta a meio gazz com as pessoas vou tentar me manter mais transparente para poder chegar ficar ai e trabalharmos melhor isso nunca irá morrer agora falas melhor estavas muito em cima mas agora eu nao posso ver ele com aquela moça ela estaria a ganhar...
Rijaj brian said:
Serious .isso e culpa tua brash agiste de cabeça quente mantem te calmo porque ja esta a meio gazz com as pessoas vou tentar me manter mais transparente para poder chegar ficar ai e trabalharmos melhor isso nunca irá morrer agora falas melhor estavas muito em cima mas agora eu nao posso ver ele com aquela moça ela estaria a ganhar...
Click to expand...
Click to collapse
dude i dont understand what you are saying xD