I have a MXQ Amlogic S805 and want to flash EmbER and install Kodi. When I hold down the reset switch and power up I never get recovery. tried holding it down for 5, 10, 30 seconds etc. It always boots to Mbox
I dont think there is any recovery install on it so I'm trying to install TWRP the recovery.img is in root but its not booting anything.
I've tried this but burntool doesn't detect the device (also tried connecting using the reset switch) (my device doesn't have a micro usb just 4 normal)
can I get help on getting recovery please?
cramhead said:
can I get help on getting recovery please?
Click to expand...
Click to collapse
Maybe you had the same issue like me. If you have the microSD right from the beginning inside it doesn't work. If so remove the card, try once more and if it will work then you can put the microSD in and flash I took me almost 30min to discover it.
good luck
That solved my problem too. Removing the microsd did the trick. After booting into recovery simply push it back in and flash away!
Thank you so much!
Hi, I have MXQ pro 4k, Amlogic s905, and I really do not find guide how to make flasch and root on this tvbox. AMLOGIC S905? Please help me, because I can not setting subtitles in right codepage. I need code page windows 1250 eastern europe. I have KODI installed.
the same things on MXQ pro S905. no recovery mode.
I bought here. - h t t p : / / aliexpress.com/item/MXQ-Pro-Android-TV-Box-Amlogic-S905-Quad-Core-Android-5-1-DDR3-1G-Nand-Flash/32500107918.html
Most likely a defective series. The seller does not respond.
I tried to trace the track of a button. In my opinion, there is no resistance. See photo. Maybe someone has the reference schematic of S905 board. Where should the button be connected?
h ttp://srv01.technikexpert.com/files/IMG_1.jpg
h ttp://srv01.technikexpert.com/files/IMG_2.jpg
My mxq pro 4k s905 has frozen and Im trying to make a bootable sd card with am logic boot card maker but it doesn't display the sd in drop down list in tool, help!
well I managed to make a bootable sd card using Bootcardmaker but no luck and tried using usb burning tool and can get device connected but get fails with error: can't get key
fails at 1% trying to flash
It's not your normal Android recovery. Its activates a recovery mode( when used with a computer) for easy flashing.
Would you mind sending me some info to help? My MXQ Pro 4k keeps freezing during playback and kicking me out to menu. Would like to install a factory image that isn't modified by the seller I bought from who won't respond. Can pm info here to : powduh09 or email, or hangouts to [email protected] thnaks
I would love that information
Tutorial
https://www.entertainmentbox.com/lat...ndroid-tv-box/
Firmware
https://drive.google.com/file/d/0B-otRcubD2DtbWpNNEN2eWgyTUE/view
Exodusche said:
Tutorial
https://www.entertainmentbox.com/lat...ndroid-tv-box/
Firmwares
https://drive.google.com/folderview?...&usp=drive_web
http://pan.baidu.com/wap/share/home?...479075&third=0
https://www.dropbox.com/s/2l0hhi6z02...160509.7z?dl=0
http://freaktab.com/forum/advertiser...o-amlogic-s905
---------- Post added at 11:14 AM ---------- Previous post was at 11:13 AM ----------
Posted everything I know.
Click to expand...
Click to collapse
These URLs all appear to be truncated in the middle by '...' am I missing something? Thanks.
Farkonian said:
These URLs all appear to be truncated in the middle by '...' am I missing something? Thanks.
Click to expand...
Click to collapse
I will upload the one I use to google drive tomorrow. For now you can try this one.
https://drive.google.com/file/d/0B-otRcubD2DtbWpNNEN2eWgyTUE/view
Hello, the link for the tutorial now redirects to a page not found. By chance is the tuturoial available as a link elsewhere?
Exodusche said:
I will upload the one I use to google drive tomorrow. For now you can try this one.
https://drive.google.com/file/d/0B-otRcubD2DtbWpNNEN2eWgyTUE/view
Click to expand...
Click to collapse
I too have a MXQ Pro+ 4K which has stucked at MBOX home screen display with distorted screen. Tried hard to get in to recovery but nothing worked. Pressing Reset button and USB Burning Tool giving no response. Its just boots to same screen again. Stock recovery is there I know (tried once when it was working) but how to get in to that when home display is frozen??
Any idea guys ??
Hello I was using TWRP on my MXQ S805, first TWRP did not open I try again and start to open, than Come to FREAKTAB.COM. I pull the power cord and I started again finely start working than updating 81 files did this least 3 times than stay stock now my box only comes on PREAKTAB.COM and staying that way.
Anyone know how to open PREAKTAB.COM with SD card or solution Please
USB burning tool does not connect with MXQ S805 box and I am looking for solution please. help will nice thank you.
Sobre o s805
Olha eu me deparei com isso agora , oque eu fiz eu instalei no dispositivo o apk oficial do TWRP , baixei o recovery original do meu dispositivo , coloquei ele num cartao sd e pluguei, logo no apk do twrp eu instalei o recovery por lá e voltou a funcionar o recovery original
Good evening.
I tried to install TWRP and after I replaced recovery and erecovery the smartphone does not turn on and hangs on the message "Your device has been unlocked and can't be trusted "
In fastboot it is not determined by computer
How to be? Or a smartphone for garbage?
@LastStandingDroid will help
fen3der said:
Good evening.
I tried to install TWRP and after I replaced recovery and erecovery the smartphone does not turn on and hangs on the message "Your device has been unlocked and can't be trusted "
In fastboot it is not determined by computer
How to be? Or a smartphone for garbage?
Click to expand...
Click to collapse
Why did you replace erecovery? Very bad idea.
Answer
--------------------> https://forum.xda-developers.com/honor-8/development/twrp-t3566563
C'est l'unique solution (j'ai passé plus de 8h à chercher)
It'll work probably
IF I OPENED THIS THREAD AGAIN SRY , I DIDN'T SEE
i have a problem with my phone ( Huawei g620s-l01 )
he is on FASTBOOT&RESCUE MODE and it says green words PHONE Locked under the android logo
when i press +,-,Power button , he goes into the fastboot menu , i did factory reset , but all is the same ..
Then i try to flash new firmware(stock) on it , i download firmware on official huawei site UPPDATE.APP and dload folder , i move this in sd card , press +,-,power and get into fastboot menu, and update is automaicaly begin , but i get this errors
1.
checking sd update pkg...
file:/sdcard/dload/update.app.size=1290100572
oemsbl version list check error!
0* ,write data error
Error:update.app is a invalid package
Error:SD card update failure, SD card update abort!
i google about that and found that i cant do downgrade , but i just trying to "reinstall stock system"
can anyone send me a link to try another file to install ?
error 2.
i was looking for this error and it says i must have unlocked bootloader
i registered in huawei official website and click to unlock code .
he give me to fill; IMEI , Serial number , Product number, Product model ,Product ID, etc ..
but i can't get Product ID because i can't use the phone to call Product ID to show on screen
so i cant get unlock code .... to unlock bootloader and then try installing UPDATE.APP..
error 3.
I installed all drivers for this device , adb drivers , fastboot , usb , etc ...
but when i type etc.(adb reboot bootloader) shows :
error : device '<null>' not found
but i installed drivers , turn phone on (fastboot&rescue mode) and connected to PC.
PLEASE ANYONE HELP ME
1. find bootloader unclock code - if i need it for install UPDATE.APP from dload folder -if bootloader is a problem
2. resolve drivers problems
3. install "UPDATE.APP" from dload folder - if it's different installation
i cant use my phone about 4 days now please help me
SRY FOR MY BAD ENGLISH , IM FROM SERBIA I DO NOT COVER MUCH ENGLISH
if anybody needs more information to help me PLEASE SAY ...
thanks in advance
i need g620s l01 scatter file
I have the same problem You have solved?
Thanks
bye bye
Hi everyone. After many hours trying to solve this by myself, I finally came here to ask you guys what to do. Maybe you can help me.
I tried rooting my Doogee S88 pro - Android 10 using this guide: https://unofficialtwrp.com/root-twrp-doogee-s88-pro/
But maybe that is where I effed up. The guide is for a Doogee S88 pro with Android 9. And I don't know if there is any difference.
So, after struggling with USB drivers (both adb and mtp) I finally could flash TWRP 3.4.0. Everything was in russian for some reason, but changing languages wasn't a challenge.
As the guide says, I should do a backup before attempting anything. And so did I. I have a backup folder both in my internal storage and my pc.
So when it came to enabling and using sideloader, it didn't work. So I made a copy of magisk*.zip to internal storage and installed it from there. By then, it failed as well and a message started popping up.
"
failed to mount /vendor (permission denied) error.
failed to mount /system_root (permission denied) error.
"
So, I did what my heart told me to do and tried to restore the backup. Same error, no answers in google. That's when I started to suspect that I used the wrong twrp
I couldn't boot into system, so everytime my phone started, it would go directly to TWRP screen. Start screen had orange state writen on it.
Anything I tried to do, installing stuff, wiping partitions, anything would fail and return the same error.
So it came to me? what if I lock the flashing of my phone? So I went to fastboot screen and used the fastboot flashing lock comand. It didn't help. Now my phone is bootlooping on doogee logo screen, written "red state your device has failed verification and may not work properly". I can't remove battery (There is no disassembly guide online), can't turn it off, can't connect it to my notebook.
Did I finally brick it?
Any help is apreciated.
Hola. Tengo el mismo problema. ¿Encontró la solución al problema? No encuentro la forma de iniciarlo en modo recovery. Está en bucle contínuo en el inicio. "Orange state".
i bought p30 with frimware ELE-L29 9.1.0.156(C891) .i didnt get any update till now and i tried to upgrade to emui 10 but the phone stock and not loading
any help where can i get this firmware or how to update to new one
Seems I have the same situation
$ fastboot oem get-build-number
...
(bootloader) :ELE-L29 9.1.0.156(C891E6R2P2)
Maybe you recovered phone already? Please tell me how?..
At this time have:
Your device has failed verification and may not work properly.
(1) Your device need to be restored
(2) Press Volume Up key up to 3 seconds or Press Power key to enter erecovery to restore your device
(3) Your device will stop start if there is no operation
trying install 10.1.0.150(C431E22R2P5) from here without success ((( with error:
Software install failed!
Incompatibility with current version. Please download the correct update package.
But what is correct for me?..
Is it possible move from C891 to C431?