After I re-flashed the device and opened it. After leaning with sanitizer and fix everything up; I wen to setup menu, in Wi-Fi select menu, it restarts. After it happened for 30 times or so, the device is bricked(I think) the phone go to boot loop.
And also Odin Doesn't detect phone.
If someone know please help me!
Related
Hello all,
Yesterday I installed Firefly 2.7 on my Canadian Samsung Captivate. Everything worked fine except that I could not receive calls (when I did I lost connection and it hung up right away without me having the time to do anything).
What I did tonight is I tried to reinstall the stock firmeware found somehwere in here. I followed the instructions which asked me to instal it using Odin3 v1.7 which I did. What happened though is that right after I clicked start button in Odin, the installation failed so I was left with an incomplete install.
I was stuck in download mode and could not do anything with my device and my phone would not reboot so I removed the battery. Now I can't boot my phone no matter what I do, I can't connect it to the computer either. I tried the button combination to go in download mode (remove the battery, wait, press vol+ and - and power, connect the phone to pc, put the battery back in, take my finger of the power button) and nothing. No matter what I do or try my phone is not doing anything. It is turned off and it stays that way.
Is my phone now a piece of garbage ? Any idea what I could do ?
Thx in advance ...
i was trying to upgrade my firmware with odin, i have a gt-i5500m. my upgrade got disrupted a little way through and now my phone is no good. i only get half a screen. when i go to check the about phone in settings, everything says unknown. when i plug it in to the computer it does nothing so it dont connect to the usb. is there away to fix this or did i create a door stop. any thoughts are welcome. please help.
is it rooted? goto recovery by rebooting on pressing power+ volume up +menu button check is it working or not
Xperian8~ click thanks if it helps...
need help too T_T
i just root my samsung galaxy w,everything is fine after root n then i uninstal some aplication n then i do factory reset,n now my phone can't instal anything to my phone.help me plzzz,what should i do???
it seems that your phone has a harware problem. The best way is to bring it to the next nearest service.
hi, I tried and it will start in download mode, but it isn't detected by the computer. so i cant seem to get root. odin just keeps asking to connect phone. i am running kies and it doesn't see the phone. I tried the recovery button sequence and it reboots the phone to home screen.is (recovery and downloading) states the same, or are they different. i'm new to all this so i'm not sure.
A few months ago my gt i5801 got a weird problem, whenever battery was low and I receieved a call, as soon as I hang up the call the pop up (power off, reboot, silent, data on/off) which normally appears by pressing power button pop ups and the phone enters in a boot loop it won't go past the gt-i5801 logo untill I remove the battery and restart it. I thought it was problem with the kisadworkx rom so changed to purumod rom but still same problem. It was all fine till 1 aug 2014 when I got a call my phone got into infinite bootloop, I went to samsung and few local shops but they were unable to fix, then I searched over internet and found that it maybe the power button problem, and someone on the galaxy y forum wrote that repeatedly pressing power may boot up the phone and it worked for me but after few seconds again the pop up appeared and again same bootloop. And and nothing works even if I enter cwm it switches off after 1 or 2 seconds. only download mode stays and I can flash rom easily but it won't boot.
please help me figure out the problem, this is my regular mobile.
1.Download correct rom
2.Factory data reset
3.Download odin v4.252
4.run odin click "one package" select ops and rom tar file.
5.Go download mod connect phone pc show odin port no.
6.Reclick one package choose ops and rom file.
7.Click start wait a sec.
8.all done.
Hey everyone,
Samsung Galaxy s5
Verizon
Fully stock as of October 10th 2015 (no sure the exact android operating system)
Not rooted or modified in any way
My wife's phone decided to kill itself yesterday. The phone worked fine in the morning then all of a sudden it stopped working. When you try to start the phone it will vibrate and nothing on screen shows up. After about 57 seconds (yes I timed it), the phone quickly displays:
ODIN: Flash read failure
ERROR: There is no pit binary
The phone then goes into a boot loop and repeats this process.
She did not approve any updates or anything, it just happened. I am assuming an app updated itself and the app was majorly corrupted and messed with the kernel?
I have tried the variety of reset options (hold power+Volume up+home screen) and it does nothing. Removing the battery and reinserting it does nothing as well. I tried to boot without the SD card and we get the same results. I can't get the phone into the menu to select recovery or anything.
When I plug the phone into my computer nothing happens. The computer does not recognize it and the phone does not respond. The phone does charge the battery, how do I know? I as well have a galaxy s5 but mine is on ATT. We swapped batteries and we could see that her phone was charging the battery.
I plugged my phone into my computer and it recognizes immediately. I can get into my phone and the SD card from the computer so that rules out the computer as a problem.
Is this hard or soft bricked?
Will a USB Jig force it to give me the download screen or recovery mode or is this thing dead?
Is there a way I can boot from the SD card even though I cant get into the recovery screen?
XDA Visitor said:
Hey everyone,
Samsung Galaxy s5
Verizon
Fully stock as of October 10th 2015 (no sure the exact android operating system)
Not rooted or modified in any way
My wife's phone decided to kill itself yesterday. The phone worked fine in the morning then all of a sudden it stopped working. When you try to start the phone it will vibrate and nothing on screen shows up. After about 57 seconds (yes I timed it), the phone quickly displays:
ODIN: Flash read failure
ERROR: There is no pit binary
The phone then goes into a boot loop and repeats this process.
She did not approve any updates or anything, it just happened. I am assuming an app updated itself and the app was majorly corrupted and messed with the kernel?
I have tried the variety of reset options (hold power+Volume up+home screen) and it does nothing. Removing the battery and reinserting it does nothing as well. I tried to boot without the SD card and we get the same results. I can't get the phone into the menu to select recovery or anything.
When I plug the phone into my computer nothing happens. The computer does not recognize it and the phone does not respond. The phone does charge the battery, how do I know? I as well have a galaxy s5 but mine is on ATT. We swapped batteries and we could see that her phone was charging the battery.
I plugged my phone into my computer and it recognizes immediately. I can get into my phone and the SD card from the computer so that rules out the computer as a problem.
Is this hard or soft bricked?
Will a USB Jig force it to give me the download screen or recovery mode or is this thing dead?
Is there a way I can boot from the SD card even though I cant get into the recovery screen?
Click to expand...
Click to collapse
Sorry for the late response.
It's a strange issue. If you really have changed/flashed/updated nothing, you should first claim warranty (if still available) and send it for repair to the shop/Verzion/Samsung support.
If no warranty, then you may register on xda and ask in the Verizon Galaxy S 5 Q&A, Help & Troubleshooting forum ...
... but if you can boot neither into download mode (Hold Volume DOWN + HOME + POWER) nor into recovery mode (Hold Volume UP + HOME + POWER), it sounds like a hard-brick.
It could also be a screen issue ... but most likely nothing you can fix yourself ... without additional hardware and/or help.
So I recommend to search for a mobile repair/support shop.
Good luck !
Hi,
Yesterday I upgraded the phone to last aospa version (no other modification such as kernel, etc.). Today, I installed Android Auto and also ungranted permissions to some apps to not to access to my location. But then, after 1 hour, i think, the phone got into a bootloop. I can't reboot into recovery as as soon as I get into the screen to choose between "Start"/"Recovery"/"Power off"/... it reboots again. It reboots so fast I don´t have time to choose fastboot or recovery, even sometimes I managed to change to "restart bootloader" but even if I press the power button to select this option, the phone reboots. Also, If I connect the phone to the grid, the phone doesn´t stop rebooting.
So, I can´t keep the phone turn on enough to go to recovery and reset or select the fastboot to reset it from the computer.
I´ve also posted this in the aospa forum, as it could be a software bug.
Help please.
Thanks.
It looks like dead power button. There are few threads abut it:
https://forum.xda-developers.com/google-nexus-5/help/power-button-finally-died-t3664125
https://forum.xda-developers.com/google-nexus-5/help/help-power-button-broken-stuck-t2761471
and more if you search.