Hello out there, I recently installed Dasaita head unit in my Nissan Qashqai Ti 2016 but im having the problem with the 360 view graphics alignment. Can anyone with the similar problem has solved this issue? Your suggestion would be highly appreciated
Kevin
Related
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
Hi all,
Anyone have been managed to receive the original parking sensor's signal on aftermarket android unit?
I bought an ERISIN 7429AI (PX5 Android 8) for my Renault Captur (year 2015) and I would to know more about. The Parking ECU (Valeo) is standard and it's mount on many other cars like Renault Clio IV.
Do I need for an specific canbus decoder and APP to receive the signals?
Thanks in advance!
Good evening
Have you managed to solve the problem?
I also can't get the factory parking sensors to work on the Renault Captur 2019
Hello gays,
Android 8.0 Car DVD Stereo 7" IPS Autoradio For PEUGEOT 407 2004-2010 In Dash Multimedia RDS GPS Navigation 4+32 GB Gift Camera
Ever encounter such a problem?
the picture suddenly crashes.
After restart, good again for a while.
the problem you see in the video
youtube.com/watch?v=HUKcD0_oWJI
thank you for watching
zolforg said:
Hello gays,
Android 8.0 Car DVD Stereo 7" IPS Autoradio For PEUGEOT 407 2004-2010 In Dash Multimedia RDS GPS Navigation 4+32 GB Gift Camera
Ever encounter such a problem?
the picture suddenly crashes.
After restart, good again for a while.
the problem you see in the video
youtube: Car Multimedia problems
thank you for watching
Click to expand...
Click to collapse
Video link?
MGoris said:
Video link?
Click to expand...
Click to collapse
youtube.com/watch?v=HUKcD0_oWJI
Hi all I was wondering if anyone can help me. I recently bought a px6 android 10 head unit, all was well till my bluetooth stopped working. My HU can't find my phone and phone can't find HU. I have factory reset but to no avail. I will attach pictures of settings page, and bluetooth module. Thanks in advance for your help
Hi with my PX6 I didn't use Your MCU but the MTCE_HA_V3.40.1
If the phone can't find the head unit then it's probably a hardware issue. Either the BT is turned off or the BT board is blown and needs replace.
Tommy14614 said:
Hi all I was wondering if anyone can help me. I recently bought a px6 android 10 head unit, all was well till my bluetooth stopped working. My HU can't find my phone and phone can't find HU. I have factory reset but to no avail. I will attach pictures of settings page, and bluetooth module. Thanks in advance for your help
Click to expand...
Click to collapse
Logcat + dmesg
Hello,
I have a Dasaita PX6 10.2" head unit running VIVID and the latest MCU 3.7.1 but I'm having problems with the phone. I can make phone calls directly from the head unit but not with "Hey Google".
All other Google assistant commands work fine but the phone doesn't.
Has anyone else had this problem or any ideas how to fix?
Thanks