Hi all,
Anyone have been managed to receive the original parking sensor's signal on aftermarket android unit?
I bought an ERISIN 7429AI (PX5 Android 8) for my Renault Captur (year 2015) and I would to know more about. The Parking ECU (Valeo) is standard and it's mount on many other cars like Renault Clio IV.
Do I need for an specific canbus decoder and APP to receive the signals?
Thanks in advance!
Good evening
Have you managed to solve the problem?
I also can't get the factory parking sensors to work on the Renault Captur 2019
Related
I just bought a Belsee PX5 Octo Core Android Head Unit for my 2016 Hyundai Veloster. It has a custom harness made for the car. It works great, except there is no sound. The backup camera works, the steering wheel controls work. Everything works....except sound. I am trying to work with Belsee via Email, but we all know how that goes. I am wondering if any of you fine people might have any suggestions that I can try.
I have gone into Factory Settings menu and changed the CANBUS to Hyundai &KIA, still no sound. The Veloster requires a signal over the CANBUS to turn the factory Amp on and produce sound.
Thanx in advance.
what did the reseller suggest when you contacted them for support? Was that to change CanBus settings?
Hi, i have the same problem after upgrading from px3... Did you resolve the problem?
I now have sound..had to swap to a harness with a CANBUS controller on it. But, the EQ does not work, the rear speakers are super low, and there is that electrical whine from the engine. But at least there is sound.
Hi I am new here but I also had the same issue with my Nissan qashqai and the Bose system. I have found that on my vehicle in the Belsee power harness that pin 1 was not present which is the 12v positive that feeds the Bose sound system. I would suggest you get a wiring diagram for the cars head unit and check to see if this is the problem.
Hello,
I have a DASAITA PX5 running hal9k's ROM and i'd like to know if it's possible to switch the colors of rear parking sensors map. Right now, when i approach something, the red lights up first, then the yellow and when i'm really close it's the green one.
I'd like to be the green first, then yellow and last the red ones
My car is a PEUGEOT 208.
Thank for your help.
How did you connect the sensors to the head unit ?
With the canbus adapter.
What kind of adapter you need ? I am looking to enable this on my Hyundai i30 2014, with PX5 android radio and hal9k 4.1, bur could find the sution anywhere. Could you please explain me what adapter are you talking about ? Many thanks
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
Hello out there, I recently installed Dasaita head unit in my Nissan Qashqai Ti 2016 but im having the problem with the 360 view graphics alignment. Can anyone with the similar problem has solved this issue? Your suggestion would be highly appreciated
Kevin
Hello, all good people, professionals, beginners. I am Slovak for the introduction and therefore your language is not my natural so I apologize in advance. What i can't write, translate in google.
I have audi a3 12.2009 sportback gen2. My original radio 8P0035186P.
Air condition 8P0820043BH
Central electrics 8P0907279N
Gateway 1K0907951
Parking assitance 8P0919475B
Steering assistance 1K0909144C
Dashboard 8P0920931T
I buy android head unit px5 1024x600 rk3368 A10 octa core cortex-a53 2gb ram 32gb rom. (mtce_chs_v3.67_1 Nov 7 2020) (core 4.19.111+ Nov 23 2020) Canbus decoder CHS 20201201 A3/A4/TT HW:v3 SW:v1.
What works: steering wheel control, day / night mode change via sensor, battery/alt voltage - that is all. Used CANBUS protocol audi A3 simple 1/2 gen in factory settings.
I have the following problems and questions: The car does not communicate with the radio at all. Radio does not display vehicle management, applications or something for any communication between the vehicle and the unit. When I change the canbus protocol to golf7 or high class audi in factory settings, will be displayed after restart - vehicleapp and controlsettingsapp. When I run the application in canbus golf, turns on but everything is unavailable. As a layman i tried to pull the app from canbus golf7 to my audi a3 simple canbus and install. The application will install, but stop immediately. What I'm doing wrong or where I should look for a mistake according to you? Why I don't have these applications there at canbus a3 simple?
I called Audi support and I asked them supports my vehicle these things: Parking radar/assistant, open doors, air conditioning, tpms and more.. They said yes but only if you have rns-e radio. Rns-e dont have bluetooth and other good staff so i buy this and I am unhappy. I use obdeleven when I turn on a function, for example parking ilustration the function will disappear from my dashboard and for me logically sends the sensor control to the radio. But no and why? it's radio too waste or audi just can't do it? I will answer every question by attaching any file ask anything.