Hi
My phone stuck at “firmware upgrade encountered an issue. Please select recovery mode in Kies“ and it neither boots nor goes to recovery mode but fortunately i can go to the download mode so i tried to flash official firmware but odin can not complete flashing and errors failed, i tried to flash twrp recover but it freezes and doesn't complete flashing so i tried to flash it via z3x samsung pro box and it can't complete flashing either! (for example during flashing, imaging boot.img size is 7mb flashing freeze at 6mb) and then errors timeout pop-up.
any solution?
is it hardware problem?
I really would appreciate if you help me
thanks
Related
please can anyone help me to bypass the softbrick, after installing a stock rom with odin he failed at the end and i waited to long then i rebooted my phone ! and now i have an error has occured while updating the device software. use the emergency recovery function in the smart switch pc software ! what shall i do please guys
Flash it again?... Try a full wipe?
If nothing works, put your phone into download mode, then through odin, install a stock image. Make sure it's the correct image!!
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Hello Guys,
A few days ago my s4 rebooted by itself and after that i was not able to boot it again. I can't boot into recovery mode but i am able to get in the download mode so i flash the stock firmware and pit file. I flashed kitkat on my phone and before it i had lollipop. After flashing the stock firmware the phone just didn't boot and i was not able to get into the recovery mode so i tried to flash the firmware again but the firmware didn't flashed successfully and i tried it for many times. So i changed my bootloader back to the lollipop one and now when i try to flash the firmware it starts and then stops on flashing system.img.ext4 and my phone lights turn off but odin still shows that my phone is connected and if i disconnect my phone it fails and then my phone has a message that firmware update encountered an issue but i am able to solve it by flashing the pit file. I don't know what is going on with my phone. any help will be appreciated.
I have a Samsung Galaxy S Duos GT-S7562 which stopped working with no warning a few months ago. The device has stock Samsung firmware and has never been rooted.
On power-up the device hangs on the Samsung logo.
When a charger is attached the battery charge animation is frozen.
Both stock recovery and download mode are working.
Attempted a factory reset and clear cache through recovery mode. Both showed as successful. Still hangs at Samsung logo.
Attempted to flash official Samsung stock firmware through Odin3. Flash succeeds with no error but restart still hangs at Samsung logo.
Attempted to flash TWRP recovery through Odin3. Flash succeeds with no error but recovery mode still comes up as stock rather than custom.
Why would Odin3 report a successful TWRP recovery flash but the device still boots the stock recovery? I have another identical S7562 that I successfully flashed the same TWRP recovery and Samsung stock firmware using the same setup, Odin3, PC and USB cable. Both are unlocked devices. Disabling auto-restart in Odin3 and attempting to boot straight to recovery after flashing doesn't help.
I suspect that a JTAG recovery may be my only option but from what I've read it should only be attempted if stock recovery and download mode are *not* working. In my case both appear to be working. Would a JTAG recovery help in this case?
Could there be some sort of NAND memory failure that does not result in any error messages during an Odin3 flash?
Thank you for any help!
I guess JTAG is the only way. Sorry.
I just flashed my blackview bv5500, with the stock rom using mediatek sp flash tool, before flash I made "format whole flash" (probably this was the mistake)
After this I flashed from download tab and got ok message at the end. But when I try to switch on the device the screen switches on because I see the light, but it is stuck on black and no any logo.
Is there any solution for this?
Thank you for your help I promise to help back when I can
Nice! I solved with different rom for brick problem, but original problem still there, device always boot in recovery mode and no any way to boot on android
Any help on this problem? My device always boot in recovery
Same problem, what ROM did you use to fix it and get your screen back ?