So, yesterday I tried to install liquid smooth on my I9500 and it bricked my phone. I ended up installing Crash ROM for the time being but whenever I try to factory reset/wipe data nothing happens. I tried the factory reset option but it boots up CWM and gives me an error. My Stock ROM is 4.3.
Can anyone please tell me what to do? I don't want to stay stuck with Crash. I'm trying KIES emergency software recovery but it says my device is not supported.
I have no idea what ROM to download right now or what to do, I'm clueless and ready to give up..
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
Hey guys,I just got that phone and managed to mess it up real good!I tried to flash stock 4.4.4 rom and odin failed at system.now the phone is stuck at emergency mode.I cant install odin to use emergency recovery,it tells me i am not connected to the internet.All stock roms i try to flash fail when odin gets to system.That has as never happened before.any help will be appreciated !
UtokUser said:
Hey guys,I just got that phone and managed to mess it up real good!I tried to flash stock 4.4.4 rom and odin failed at system.now the phone is stuck at emergency mode.I cant install odin to use emergency recovery,it tells me i am not connected to the internet.All stock roms i try to flash fail when odin gets to system.That has as never happened before.any help will be appreciated !
Click to expand...
Click to collapse
It sounds like you need to repartition your phone by flashing a rom with a pit file included. I'm not sure if kies emergency firmware rescue is available for your device as that would have a pit file included. Try asking in this thread here
http://forum.xda-developers.com/android/development/4-4-4-5-1-1-6-0-1-samsung-xcover3-t3465132
Good luck
Sawdoctor
hello guys,
can you please help me unbrick this samsung V plus (SM-G318MZ). first problem was it was stuck on samsung logo. so i decided to flash it with odin. after the flashing was done, nothing appears on the screen. i put it in download mode and recovery mode but this options never appears in the screen. the only thing that i can do is by holding the volume up button and insert the cable. computer detects a SCI USB2Serial. so this means i made a mistake by flashing spreadtrum with odin but it says PASS in ODIN. i think the phone is hard brick. can someone please help me revive this phone. thank you in advance.
Re-flash Stock ROM.
how to do it? i cant get to download mode?
jwoegerbauer said:
Re-flash Stock ROM.
Click to expand...
Click to collapse
can you please help me on this. i can't get anymore to download mode? how can i flash the stock rom? what procedure am i gonna use sir?
Hi
My phone stuck at “firmware upgrade encountered an issue. Please select recovery mode in Kies“ and it neither boots nor goes to recovery mode but fortunately i can go to the download mode so i tried to flash official firmware but odin can not complete flashing and errors failed, i tried to flash twrp recover but it freezes and doesn't complete flashing so i tried to flash it via z3x samsung pro box and it can't complete flashing either! (for example during flashing, imaging boot.img size is 7mb flashing freeze at 6mb) and then errors timeout pop-up.
any solution?
is it hardware problem?
I really would appreciate if you help me
thanks