Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
Related
Hi all!
In a process of unroot, I have a bricked GTab2 7".
I can go to Stock (3e) recover and Download Mode.
Attempted 'Install from SD card to flash a stock firmware gives 'Signature Verification Failed' error.
Device is detected by computer as I can see it in Device Manager as 'Samsung Android Phone' and have drivers install by Kies.
In Odin, it shows up as added device but there is no Yellow box - so no flashing is possible.
Any help will be appreciated!:fingers-crossed:
Edit: Please Ignore the post - it was only me - problem solved!
umardoc said:
Hi all!
In a process of unroot, I have a bricked GTab2 7".
I can go to Stock (3e) recover and Download Mode.
Attempted 'Install from SD card to flash a stock firmware gives 'Signature Verification Failed' error.
Device is detected by computer as I can see it in Device Manager as 'Samsung Android Phone' and have drivers install by Kies.
In Odin, it shows up as added device but there is no Yellow box - so no flashing is possible.
Any help will be appreciated!:fingers-crossed:
Click to expand...
Click to collapse
maybe a silly question. but you are in download mode when you are plugging it in to the pc and looking at odin? make sure kies is disabled and not running too.
squ89r97 said:
maybe a silly question. but you are in download mode when you are plugging it in to the pc and looking at odin? make sure kies is disabled and not running too.
Click to expand...
Click to collapse
No question is a silly question! :laugh:
Ofcourse, I plug in to Odin in Download Mode. It shows as added and port number appears but big box doesn't turn to yellow which shows it as ready for flash.
Flash the recovery.. By rom manager , u can find it in play store and its for free
Envoyé depuis mon GT-P3100 avec Tapatalk
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Install latest samsung driver
flash samsung firmware via odin
Abhi04 said:
Install latest samsung driver
flash samsung firmware via odin
Click to expand...
Click to collapse
He said that he installed the drivers.Try to uninstall them and install Kies from Samsung and try to connect with that,but you need to flash the stock firmware via Odin
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
gabyif said:
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
Click to expand...
Click to collapse
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
mohitum007 said:
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
Click to expand...
Click to collapse
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
gabyif said:
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
mohitum007 said:
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
Click to expand...
Click to collapse
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
gabyif said:
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
Click to expand...
Click to collapse
But it is not recognized in download mode too......:'(
mohitum007 said:
But it is not recognized in download mode too......:'(
Click to expand...
Click to collapse
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
soham jambhekar said:
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Ok i will try that too...and check if it works !!!
Do you have any download link for latest drivers?
www.mediafire.com/?h4waxh8r5twuwuq
this is the link to samsung usb driver installer
Sent from my GT-S5670 using xda premium
not connect kaise
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
nirajkrm1 said:
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
Click to expand...
Click to collapse
Maybe your baseband version isn't of ur country/region. Also check ur drivers
Sent Via XDA™ Premium
IT seems to me that u tried to instal cm10.1 with stock recovery( isn't it). if u did u probably soft bricked ur device.. if not if u hv installed cwm recovery 5 by tj style using odin multi downloader...then tried to install cm10.1 then wipe data and try installing the rom again....
Second; if u hv stock recovery + soft bricked ur device and u cannot connect to ur computer then probably u hv no choice but to goto local mobile repair center... in your device the charging ic may have been damaged which will they replace for rs.200/- and flashing ur device back to normal will cost u rs.200/- extra....using their circuits..something z-box....
third; if u went to authorised samsung care they will blindly charge u rs.4000/- for changing motherboard and messing up the software...which noboy wants.. or ucan makeup a story and fool them and replace ur motherboard if under warranty...
fourth; try to check with local mobile repairwallah and u can yourself flash stock rom at local internet cafe...and then root then instal cwm5 recovery then install diifferent roms for our device.....
take care..:good: luck
i need a recovery for galaxy fit
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
bosi255 said:
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
Click to expand...
Click to collapse
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
Yes, but here is more precise link:
http://forum.xda-developers.com/showthread.php?t=2413137#4
please help me
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
yes i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
helppp
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk
I have a samsung galaxy s2 i9100g. I was using the mobile odin to flash. After the flash the phone got stuck in the boot logo. I am unable to get into cwm but I can get into download mode. The problem with download mode is that odin does not recognize my phone in download mode. Please help.
anannyacool2008 said:
I have a samsung galaxy s2 i9100g. I was using the mobile odin to flash. After the flash the phone got stuck in the boot logo. I am unable to get into cwm but I can get into download mode. The problem with download mode is that odin does not recognize my phone in download mode. Please help.
Click to expand...
Click to collapse
Hi,
I think the download mode drivers are missing on your pc. Just google for some guides to install them.
After that, you have to unbrick your device. Just google for some good guides, there are lots of guides to unbrick your device.
Next time when flashing, do a factory reset before flashing.
Hope this is helpfull
Drivers wont work
supergerrit said:
Hi,
I think the download mode drivers are missing on your pc. Just google for some guides to install them.
After that, you have to unbrick your device. Just google for some good guides, there are lots of guides to unbrick your device.
Next time when flashing, do a factory reset before flashing.
Hope this is helpfull
Click to expand...
Click to collapse
I did try to install the drivers. I even reinstalled kies but it doesnt seem to work.I tried different PC's and different versions of Odin but no luck.
Hi. I think you should have the right .ops file. With the right ops file detects odin your phone
I have a Samsung core i8262 device, i flashed with Cosmic Rom last night and it is stuck on the logo of cosmic rom, I have installed CMW recovery but i can't find my sd card in there, it shows " Choose zip from auto", when i click that it doesnt do anything, i tried entering download mode but odin doesn't detect my phone, i have tried installing & reinstalling kies but no results, installed samsung drivers and adb nothing works, i currently can enter cmw recovery and download mode, but download mode doesnt detect in my pc i tried in my laptop too no results, can someone help me, by mistake i've wiped system in cmw after installing cosmic rom, so i think thats the problem, any suggestions?:crying::crying:
Do you tried to change the usb cable?
Try a different odin version or try opening odin in admin mode first then connecting your phone to the cable (with the phone already in download mode before you plug it in)