I have a samsung galaxy s2 i9100g. I was using the mobile odin to flash. After the flash the phone got stuck in the boot logo. I am unable to get into cwm but I can get into download mode. The problem with download mode is that odin does not recognize my phone in download mode. Please help.
anannyacool2008 said:
I have a samsung galaxy s2 i9100g. I was using the mobile odin to flash. After the flash the phone got stuck in the boot logo. I am unable to get into cwm but I can get into download mode. The problem with download mode is that odin does not recognize my phone in download mode. Please help.
Click to expand...
Click to collapse
Hi,
I think the download mode drivers are missing on your pc. Just google for some guides to install them.
After that, you have to unbrick your device. Just google for some good guides, there are lots of guides to unbrick your device.
Next time when flashing, do a factory reset before flashing.
Hope this is helpfull
Drivers wont work
supergerrit said:
Hi,
I think the download mode drivers are missing on your pc. Just google for some guides to install them.
After that, you have to unbrick your device. Just google for some good guides, there are lots of guides to unbrick your device.
Next time when flashing, do a factory reset before flashing.
Hope this is helpfull
Click to expand...
Click to collapse
I did try to install the drivers. I even reinstalled kies but it doesnt seem to work.I tried different PC's and different versions of Odin but no luck.
Hi. I think you should have the right .ops file. With the right ops file detects odin your phone
Related
Hi I was trying to upgrade the Android Version on a Galaxy S2.
I installed Clockwork Mod Recovery and was able to boot into it but couldn't access the SD for installing image.
I booted into the downloading screen ( vol down and power on boot ) and installed an image then bootloader via Odin.
Now when I boot there is the standard Samasung Galaxy S2 logo and I can't access the downloading screen or clockwork mod and it just goes to the animated S logo with usb not recognized appearing on the connected Windows box.
Is there anyway to restore from this point?
Are you able to access the phone through ADB?
If yes, run: adb reboot download, and this should put you in downlaod mode so you can odin a new firmware.
If no adb access, Does odin recognize the phone?
If yes, you should be able to odin a new firmware.
Make sure when you flash the new firmware you are using the correct rom for your device. ie: from your post you have a GS2 I9000 which is not the same as the GS2 SGH-T989.
you would use roms from this forum: http://forum.xda-developers.com/forumdisplay.php?f=665
If you are unable to flash a rom you can always purchase a download mode jig to get you into download mode if you have not Hard Bricked the phone. If you have Hard Bricked your phone there are a couple of sites that do Jtag repair to unbrick your phone.
Good Luck
No reponse from Odin or ADB
I have purchased a download mode jig hopefully it will work.
Thanks for your advice
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
I had rooted my note 3 neo sm-n750 device twice before through odin. i had never faced issues as i m having now.
i had rooted my n3n earlier and also revert it to stock through odin, but i mistakenly installed "INS" version of rom where my devicebox indicates "INU". after that i re-tried rooting same device through odin method. my device connected perectly also i dont get any error throughout the process but my device download mode not respond to any update so odin process stuck. i tried every wayout available at android forums i got nothing helped me out. so i decided to root my device by apk available in market. i installed kingoroot and it rooted my device properly. after that i installed flashify apk to flash recovery and after that i got a pop-up asking to reboot in recovery. i pressed reboot and it wont reboot into recovery whereas it stuck at n3n startup logo. now i m not even able boot into stock recovery, and my downloading mode also not responding. i tried kies firmware installation and updation process. my device connected perfectly downloaded require files but stuck after downloading procedure as my downloading mode isnt responding. i have only option to boot in download mode only.
please help me.
Thanks in advance.
Hello and welcome to Assist
Please register an account and ask for help in your device section linked below, making sure you include as much detail as possible
https://forum.xda-developers.com/note-3-neo/help
Good luck
Alrighty, I have S8 Plus and it was already rooted so it had the twrp recovery, i've wanted to format my phone , but i ticked the system too soo yeah, I cant turn off my phone, cant enter into recovery mode, cant boot it up, can only access download mode or to get stuck on the Samsung Galaxy S8+ boot.
I've tried downloading firmwares but when i flash it fails with odin, I have no clue which one is the right firmware, my android version is 7.0.0.
please help me out.
AnonyDope said:
Alrighty, I have S8 Plus and it was already rooted so it had the twrp recovery, i've wanted to format my phone , but i ticked the system too soo yeah, I cant turn off my phone, cant enter into recovery mode, cant boot it up, can only access download mode or to get stuck on the Samsung Galaxy S8+ boot.
I've tried downloading firmwares but when i flash it fails with odin, I have no clue which one is the right firmware, my android version is 7.0.0.
please help me out.
Click to expand...
Click to collapse
What errors are you getting in odin
AnonyDope said:
Alrighty, I have S8 Plus and it was already rooted so it had the twrp recovery, i've wanted to format my phone , but i ticked the system too soo yeah, I cant turn off my phone, cant enter into recovery mode, cant boot it up, can only access download mode or to get stuck on the Samsung Galaxy S8+ boot.
I've tried downloading firmwares but when i flash it fails with odin, I have no clue which one is the right firmware, my android version is 7.0.0.
please help me out.
Click to expand...
Click to collapse
Samsung Device Firmware Restore with Smart Switch program and factory reset
https://www.youtube.com/watch?v=9QhJngOuLQ4
hello guys,
can you please help me unbrick this samsung V plus (SM-G318MZ). first problem was it was stuck on samsung logo. so i decided to flash it with odin. after the flashing was done, nothing appears on the screen. i put it in download mode and recovery mode but this options never appears in the screen. the only thing that i can do is by holding the volume up button and insert the cable. computer detects a SCI USB2Serial. so this means i made a mistake by flashing spreadtrum with odin but it says PASS in ODIN. i think the phone is hard brick. can someone please help me revive this phone. thank you in advance.
Re-flash Stock ROM.
how to do it? i cant get to download mode?
jwoegerbauer said:
Re-flash Stock ROM.
Click to expand...
Click to collapse
can you please help me on this. i can't get anymore to download mode? how can i flash the stock rom? what procedure am i gonna use sir?