I have a samsung galaxy s2 i9100g. I was using the mobile odin to flash. After the flash the phone got stuck in the boot logo. I am unable to get into cwm but I can get into download mode. The problem with download mode is that odin does not recognize my phone in download mode. Please help.
anannyacool2008 said:
I have a samsung galaxy s2 i9100g. I was using the mobile odin to flash. After the flash the phone got stuck in the boot logo. I am unable to get into cwm but I can get into download mode. The problem with download mode is that odin does not recognize my phone in download mode. Please help.
Click to expand...
Click to collapse
Hi,
I think the download mode drivers are missing on your pc. Just google for some guides to install them.
After that, you have to unbrick your device. Just google for some good guides, there are lots of guides to unbrick your device.
Next time when flashing, do a factory reset before flashing.
Hope this is helpfull
Drivers wont work
supergerrit said:
Hi,
I think the download mode drivers are missing on your pc. Just google for some guides to install them.
After that, you have to unbrick your device. Just google for some good guides, there are lots of guides to unbrick your device.
Next time when flashing, do a factory reset before flashing.
Hope this is helpfull
Click to expand...
Click to collapse
I did try to install the drivers. I even reinstalled kies but it doesnt seem to work.I tried different PC's and different versions of Odin but no luck.
Hi. I think you should have the right .ops file. With the right ops file detects odin your phone
After falshing Cosmic ROM for my galaxy core duos via CWM recovery I stucked in boot loop.. I tried everything I have red on forums with no benefit ..tried to reinstall CMV or TWRP via odin 3.07 but it didn't recognize my phone . .actuallly in the past, my laptop wasn't recognizeing my phone no matter what i did ( installing drivers or Kies ,changing cables ,even changing micro usb port on my device)
After a lot of searching in Xda forums somebody gave a zip file to flash in CWM recovery mode to repair connection to odin (CWM_De_Loaper.zip) .by doing this I lost ability to inter recovery mode .I can only inter downlaoding mode without ability to connect to odin...
Can somebody help my or I just have to satisfy with my very old stupid Nokia and live in stone ages:crying::crying:
please help
Download drivers for ur device in pc...after that odin will recognise ur device .....then simply flash it with stock firmware. ....
And and and don't forget to hit that thumbs up
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
ZioBanana said:
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
Click to expand...
Click to collapse
Download smart swich to your pc got to emergencey recovery in the secound tab at top right put your model number and serial number in then it will ask you to put the phone into dl mode then it will fash stock back onto your phone
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
hello i have a samsung s6 rooted and a TWRP installed i just entered to twrp an wiped system partition now the s6 cant boot i tried to flash it via odin but odin cant detect it in download mode i installed samsung usb drivers but the same problem i tried to boot via external storage in recovery mode but TWRP don't see the usb otg. is there a chance to flash it. i did all the solution like adb skipsoft toolkit samsung kies smart switch without result. help me please
medson said:
hello i have a samsung s6 rooted and a TWRP installed i just entered to twrp an wiped system partition now the s6 cant boot i tried to flash it via odin but odin cant detect it in download mode i installed samsung usb drivers but the same problem i tried to boot via external storage in recovery mode but TWRP don't see the usb otg. is there a chance to flash it. i did all the solution like adb skipsoft toolkit samsung kies smart switch without result. help me please
Click to expand...
Click to collapse
Greetings and welcome to assist. As you have wiped your system the phone will not boot. If you are struggling with odin then you can either flash a rom like this
http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
through twrp or you could try kies emergency firmware recovery if you want to return to stock
Good Luck
Sawdoctor