I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
ZioBanana said:
I don't know what went wrong with the adb update, but now I can't do anything. I can just enter in recovery mode and download mode.
The phone goes in bootloop (It can just load the first booting screen where there is the Samsung s6 logo) and when I try to do the manual update from external sd or adb etc... It says that is disabled. Any tip to fix it? The device was rooted before the 5.1.1 android update.
Help me please :crying:
Click to expand...
Click to collapse
Download smart swich to your pc got to emergencey recovery in the secound tab at top right put your model number and serial number in then it will ask you to put the phone into dl mode then it will fash stock back onto your phone
Related
Hi I was trying to upgrade the Android Version on a Galaxy S2.
I installed Clockwork Mod Recovery and was able to boot into it but couldn't access the SD for installing image.
I booted into the downloading screen ( vol down and power on boot ) and installed an image then bootloader via Odin.
Now when I boot there is the standard Samasung Galaxy S2 logo and I can't access the downloading screen or clockwork mod and it just goes to the animated S logo with usb not recognized appearing on the connected Windows box.
Is there anyway to restore from this point?
Are you able to access the phone through ADB?
If yes, run: adb reboot download, and this should put you in downlaod mode so you can odin a new firmware.
If no adb access, Does odin recognize the phone?
If yes, you should be able to odin a new firmware.
Make sure when you flash the new firmware you are using the correct rom for your device. ie: from your post you have a GS2 I9000 which is not the same as the GS2 SGH-T989.
you would use roms from this forum: http://forum.xda-developers.com/forumdisplay.php?f=665
If you are unable to flash a rom you can always purchase a download mode jig to get you into download mode if you have not Hard Bricked the phone. If you have Hard Bricked your phone there are a couple of sites that do Jtag repair to unbrick your phone.
Good Luck
No reponse from Odin or ADB
I have purchased a download mode jig hopefully it will work.
Thanks for your advice
Hi, My d838 is working i flashed a lot of roms this month i dont know if that is the cause..
but my phone is working fine everything.. Recovery is twrp and working. but cant go in download mode.. when i try go to download mode it shows up boot certification verify - Secure booting error - cause boot cerification verify.
is there any way to get the download mode?
Simply
Shutdown phone
Press volume + and plug usb cabe from pc
experiencing the same issue. no download mode for me. hope you could help me guys. after u downgraded my firware back to kitkat this is what happened. thanks in advance.
install tizen rom 7.1 it will restore your download mode
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
tazaga said:
"Use the emergency recovery function in the smart switch pc software." With This message you can stil flash rom with odin emergency...= download mod its the same or flash latest twrp recovery go inside recovery connect your phone copy past custom rom flash it ...its not bricked if it says use emergency message its just saying flash me with odin easy
Click to expand...
Click to collapse
Out of curiosity and sorry for jumping on your post but I've have not had any response on my thread and my device has been soft bricked for 4 days now.
How can i go about flashing my device if my PC wont recognise my phone. I've tried everything.
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Force it into download mode and do it again, worked for me
tazaga said:
What is the situation you have is there any message or can you turn it on or can you recovery mod or download mod ?
Click to expand...
Click to collapse
Hi so I get the message saying " an error occurred while updating the device software. Use the emergency recovery function in the smart switch PC software" however i cannot get my PC to recognise my device. I have tried 6 different cables, 3 different laptops used 3 different ODIN software versions, removed kies removed and installed drivers, been into my laptop BIOS to disable 3.0 usb drivers also done this through the power saving options. Only thing I have not tried is using a 32bit computer. Surely there is a away to get my laptop to recognise this phone as i used this laptop to screw it up in the first place.
I can get it into download mode, but i cannot get it into recovery mode.
The PC shows a message saying "USB device not rocognised. The last USB device you connected to this computer malfunctioned and Windows does not recognise it."
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
HowJesNo said:
i had similar problem with that message as in thread this thread
try flashing with hidden.img, worked for me but after that i got other problem but at least phone works.
Click to expand...
Click to collapse
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
does odin recognize phone is connected?
HowJesNo said:
does odin recognize phone is connected?
Click to expand...
Click to collapse
He said no. Please read to understand if you really mean to help someone.
Twydell said:
Yeah I would just flash it, my issue is it will not connect to the PC. For me to flash it or transfer any image to then internal memory i need to have the laptop recognise my device connected. If i had a removable SD card i could just put TWRP on this and go into recovery but the s6 doesnt have this feature either.
I have no idea what to do. I was hoping someone would have a resolution that i have not yet tried and could get my PC to recognise the phone connected.
Click to expand...
Click to collapse
Have you tried usb otg?
Try to delete USB drivers and reboot install them again
That Binary Check problem mostly means you're trying to downgrade the firmware. Look for the latest version from fw.updato.com and flash it.
Strepherd said:
Hello,
I need your help because I'm in real trouble.
Before I hard bricked my phone I was on the latest version of the Tyrannus Rom.
I wanted to install Xposed but I picked the wrong version.
I flashed it but I got a boot loop.
So i've downloaded the latest stock Rom from Sammobile and tried to flash it with Odin.
Odin got an error and f*cked up my download mode.
Now I'm stuck with a bricked phone with no download mode.
I only got this message on the download mode : "Use the emergency recovery function in the smart switch pc software."
Wich I did.
It downloaded the software and tried to install it but got an error at the begining of the instalation after the download.
After that I restarted it and the download mode was working, so I've tried again to install the stock firmware and didn't worked.
This was the error it gived me : "cm sw rev check fail device 4 binary 3"
Please help me.
Click to expand...
Click to collapse
Haha same thing with me.. its not hard bricked. Flash twrp with odin while that message opens up then a custon rom
i Rooted my samsung s duos 2 with Kingoroot and then flashed with Rashr flashing app. Then i rebooted it in recovery mode but now it has got stuck on samsung logo screen and unable to go in recovery mode or download mode please help . :crying::crying::crying::crying::crying::crying::crying:
I am unable to enter recovery mode and not able to start up my device also . The screen got stuck on Samsung logo . please any one help
Same problem!! Don't know when I'll get the solution...
defyreborn said:
i Rooted my samsung s duos 2 with Kingoroot and then flashed with Rashr flashing app. Then i rebooted it in recovery mode but now it has got stuck on samsung logo screen and unable to go in recovery mode or download mode please help . :crying::crying::crying::crying::crying::crying::crying:
I am unable to enter recovery mode and not able to start up my device also . The screen got stuck on Samsung logo . please any one help
Click to expand...
Click to collapse
Same problem brother.. If you get any solution then please do post or text me +919668450825 WA
Download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy
Vishal Shrivastav said:
Download odin and firmware from Google, put i in your computer, turn off your phone go to download mode(press power button,home key and volume down key simultaneously)
Open Odin on computer select PIT/AP and locate firmware you just downloaded connect your phone through usb when it show [com 6 ] or something like that then press start, leave it till process complete, it will reboot in between the process, dont panic just wait till it say ok.....turn it on injoy
Click to expand...
Click to collapse
will this erase all the data on the phone?
aquabigo said:
will this erase all the data on the phone?
Click to expand...
Click to collapse
No
I'm using a galaxy note 9 sm960F
I installed the wrong twrp and now my phone wont boot
I cant get into recovery mode or download mode
I even tried usb jig to force it to download mode but nothing happened
Odin cannot recognize the phone anymore
The phone wont drive into pc
I let the battery drain, then used different key combinations to see if it enters recovery but nothing
Please help me unbrick my phone thanx