Hello all,
I'm working in a repair center for some manufacturers of professionals PDA.
Sometimes we are facing to hard bricked devices, the devices are simply seen as a "Qualcomm HS QDloader 9008", and so, can't boot.
One of the manufacturers don't want send the files for save the device, so I want to search on my side the solution for save the devices without replacing the Main boards.
Device (android 5-6-7-8-9):
Touch Mobile Computer EF500
The Proven Innovation of Enterprise Mobility
www.bluebirdcorp.com
We have the ROM files for a standard installation, but not the files for use with QFil for example.
So, how can generate the files, if possible, for use QFil ?
- A dump from a working device ? But I can't root these devices...
- Use the standard ROM files for generate the Firehose files ?
- Or use a box like "Magique box" (or other) for send files ?
Thx for your help !
Related
I want to mess with my cell phone's (LG KG300) operating system.
But how can i dump or mess with it? Should i start directly analyzing the circuit or should i try software techniques? show me a way. I am learning assembler and know enough about digital circuits
------------------------------------------
With LEO DOWNLOAD TOOL, can i dump my firmware or upload any other firmware to my phone via USB cable? or DO I need another type of cable?
I don't have a kg300. Read the service manual. And try!
I have tried it but it seems the serial communication driver doesn't work for windows 7. I guess I have to try on XP
I am trying to upgrade the firmware of KG300 but the DEVIAN TOOL does not recognise the cell phone (it doesn't show a COM port) in windows 7 64 bit. I guess the problem is because of the driver. Is there a solution or another way to do it?
Hi, I'm making a distribution of memory in a "Huawei Y550-L03" modifying SCETTERs, but when you plug the phone is thinking about the "MTK Droid Root & Tools 2.5.3" (indicator bar in yellow, then off) and get an error message saying the phone long wait was disconnected, I have to restart the phone to be re-recognized in the PC by the USB port, this makes me also with "Huawei G620S", both, with the "SuperSU 2.76 "installed. I have installed the Windows 10 64bit, I have been told that these programs run well under Windows 10 (with administration rights logically) do not understand what happens.
If I can not make the ROM image and get the SCETTERs, I can not get EBR1 and EBR2 files to modify and increase the internal memory, that is now 1GB (4GB total.) On mobile low and medium range.
What should I do? :crying:
Can you help me?
I climb a catch error! http://prntscr.com/c2jvjz, http://prntscr.com/c2jvgh, http://prntscr.com/c2jvcr, http://prntscr.com/c2jv23
Another thing, not all ROMs are in the portals ROMs, for example here or in other forum: http://www.needrom.com/, are Backups with EBRs inside, almost all these made with MD5, how does convert them to another format?
Whats another programs that do, or it is impossible?
Another program, different from "MTK Tools", that you can perform Backup ROMs and I can generate files EBRs format?
Thank you.
Well, I write this with the faith that someone can help me. Try to change the ROM of a Chinese cell (this model is supposed to be ALPS K10, but since check the computer and opening applications, I realized that this might not be the model name, Besides, it is supposed to be a clone of the last LG K10). Try changing the rom as they passed many things
- Said he was 8 gb storage, when he was only 4 gb (same for the ram, said it was 1 gb, when only has 512 mb)
- When installed a .obb apk data (cache), ie a pirated app of the many pages that are on the network, moving his data to the "Memory", and installed the apk, the question was that when starting the game and in spite of having the data obb in the folder, the game would not start, but if you disabled external sd (where by the way, when you install the apk this created a folder for meta data there, when the he had internal memory) started the game normal, the same as the file was in obb
- There was no way multitasking use (it awarded 512 of ram and software)
- Mentioning again giving false data (internal storage, ram, etc, which awarded the modified software or something more)
Well, the point I want to make is that because of all these problems decides to flash the rom a very similar device (I mean also that I could not make a backup of the rom because even though I had all the drivers, tools and other the mtkdroid application tools I would not allow it, and neither could I make a copy of the IMEI that like applications pc applications android (mobileuncle for example) I permitted (device not compatible. Download the rom BLU NEO X, who was one of the many devices SoC MT6580 and 512 of ram (at least that's what I saw), and try to install with SP flashtool, flashing came out successful, but when I followed the footsteps of another forum, saying he should disconnect after it leaves the window "success", the phone no longer worked.
If anyone can help me giving me ideas where else can I find the stock rom of that device, or if there is any way to revive the less in recovery to try to do something, please do so; It is that it is forbidden rom's asking in this forum, but after searching for several days, you can say I'm already losing hope
Deputy something more for direct purposes if anyone knows, incidentally, how to solve this error, because the pc if it recognizes the COM port to connect the mobile bricked, so, I guess there must be some way to fix it:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (0XFC0)
EMI: Enable DRAM Failed!
HINT: Please check your load to your target matches Which is to be downloaded
Sorry for the faults that can be found in this text, but I used google translator to write because my English is not very good, even so, I wish you can help me
thanks, and help me!
Hi
Try asking in the link below. Hopefully someone will be able to help you
http://forum.xda-developers.com/android/help
Good luck
Hi everybody,
not sure whether I can post this within the clone phone threads since I do not know the processor nor the manufacturer.
Phone is a pseudo iPhone which runs some kind of Android which is disguised as iOS (really bad quality).
Unfortunately this Android is really instable and phone does not work reliably.
Now I am trying to find out whether there might be another Android version which I could flash instead. Already identified Needrom as possible source but need the real device manufacturer and processor before.
Any idea how I could proceed here? Just still trying to avoid to connect to PlayStore on this phone since the Chinese ones are known for their spyware.
Recoveryis accessible.
From backside: A1660FCCID;BCG-E3085AIC59C-E3085A
From About: Modell: MNRJ2CH/A
Which other information do I need to provide/identify the phone and how do I get it?
Any help highly appreciated.
Bye
First things I identified are that it seems to be a Lenovo using MT65xx - at least this was shown during driver installation when phone was connected to Win PC.
After connecting to Win10 Laptop YunOS ACB Interface has been installed. MTKTools tells about the already known fake and says its an MT6582.
So how can I provide a suitable stock ROM onto it?
Renth said:
First things I identified are that it seems to be a Lenovo using MT65xx - at least this was shown during driver installation when phone was connected to Win PC.
After connecting to Win10 Laptop YunOS ACB Interface has been installed. MTKTools tells about the already known fake and says its an MT6582.
So how can I provide a suitable stock ROM onto it?
Click to expand...
Click to collapse
Hey Renth,
I am afraid I got one of those too. It looks like an iphone with 250GB memory, but in eality it only has less than 50 MB.
Model: A1660 FCCID BCG E3085A IC579C E3085A
I a wondering also if I can wipe out whatever it has installed.
Sorry for the late reply. I also raised that topic within China Devices Forum back then. There I documented all my activities (hopefully did not forget anything).
Do not know whether cross referencing is allowed, so just send me a PM then I can provide you the link. Alternativly you can ask google for "How to identify real device (Clone phone)?" and then follow the link with the same topic at Chine Devices forum.
Is it possible? Or maybe creating a firmware from rooted devices that can be flashed with newflasher. Could this be possible? What are the brakes in creating this?
Stock firmwares are signed with sony's specific keys. When flashing a firmware, the device checks for the correct keys and if they don't match the original ones, it won't open up a connection to let you flash anything. And as nonbody outside sony knows any of these keys, you won't be able to create your own package to flash via emma/flashtool/newflasher (without unlocking your bootloader).
Hello Brad!
1. Who is checking for the keys, bootloader or the floasher program (newflasher or flashtool)?
2. Couldn't we make both a floasher and an image of a rooted device both signed with the same key, than flash it?
3. Maybe Windows ARM for 835 laptops will let us see all partitions, that will be the easyest way... knowing that Windows has tons of drivers... The key is to access the ufs 2.1 nand storage, in theory for Windows it will not be a problem, maybe to develop there a disk manager that can read bit by bit like r drive image ??? can't wait for that ?
Inerent said:
Hello Brad!
1. Who is checking for the keys, bootloader or the floasher program (newflasher or flashtool)?
2. Couldn't we make both a floasher and an image of a rooted device both signed with the same key, than flash it?
3. Maybe Windows ARM for 835 laptops will let us see all partitions, that will be the easyest way... knowing that Windows has tons of drivers... The key is to access the ufs 2.1 nand storage, in theory for Windows it will not be a problem, maybe to develop there a disk manager that can read bit by bit like r drive image can't wait for that
Click to expand...
Click to collapse
you speak so boldly, you try it.
sony learned a lot of methods to prevent hacking thanks to its Z1~5 and PlayStation PSP, PS3 experiences.