ok so this is my first post, ive been messing with android for a year now, first rooted about 2 months after i got my first phone(verizon lg vortex which is also screwed up(boots up but doesnt go past the verizon logo after the lg logo) anyways i thought id save money ordering a "non-branded" tablet Model: T02A (It is the same as EKEN T02 i think)
7`capacitive touch screen 800x480
4GB NAND FLASH
512 MB RAM DDR3
ARMv7 A10 Cortex A8 1Ghz
0.3 mpx front camera
Kernel 3.0.8+
OS - ICS 4.0.3
but after installing titanium backup i simply used the reboot the device option, come to find out it basically factory reset itself and now shows 0 in the internal memory but 37.7MB of apps, it wont let me install apps and there is no way i can find to direct it to install in another location, i can download apps from anywhere but the market but no install, is there anything i can do to get the int. mem. back or somehow flash the original os? ps i have aalready tried hard resetting both with vol down and power and the settings>backup&reset>factory data reset>reset tablet.
as it is i can use it as basically a video screen with stuff on my sd and surfing the net, but i bought it with a bit more in mind. if anyone can PLEASE help i would appreciate it, and im sorry if this post is a bit long...
you already managed to solve?
I'm with the same problem. you already managed to solve?
Let's try it together. my email is [email protected]
Solution for T02A internal memory says 0, no install
wagnerlandio said:
I'm with the same problem. you already managed to solve?
Let's try it together. my email is [email protected]
Click to expand...
Click to collapse
Dear Friends,
I am a newbie to android.I also faced the same issue after rooting my T02A tab(Telmoco tab,a Indian company but Chinese re-branded device).
I bought it for my wife and did some experiments with it(rooting).Later its automatically doing factory reset in every booting.Also every time I need to login to play store after turning off the device.So she is very upset with the tab as I bricked it.So I did lot of research to bring it up as you guys are trying.After googling I found a support website of EKEN tab (eken.com/support/) and downloaded firmware for T02A and a livesuit(firmware update utility) from another website.
First download both links from below mentioned websites.
Please note that I am not an expert so what ever you are doing please do it on your own risk.
Also these steps and all I found from diffferent google searches so I won't be able to help you if you ask me any questions.
I am happy to answer but no idea about it..
Lets start
Firmware link from eken site for T02A is f t p://202.105.131.8/t02.rar
Livesuit link whatisandroid.me/LiveSuitPack_v1.07.zip
Extract livesuit rar file to a folder and run LiveSuitPack_v1.07.exe and it will extract all the contents to same folder.
extract the t02a.rar(downloaded firmware)and yo will get the following file "sun4i_crane_t02a.img" .Later we need it for firmware update.
Run "LiveSuit.exe" inside the livesuit folder(run as admin)
Now the livesuit user wizard will popup.
If the popup didn't came automatically then choose "wizard upgrade" manually
I prefer you to use the upgrade guide.
so press yes
Choose Mandatory upgrade mode as it is recommended
It will tell you to remove all connected usb devices from your PC as it may interrupt your process.
also remove the power source from the Tablet.
press next
then select yes for to select image file
choose the "sun4i_crane_t02a.img" (extracted firmware file)
The livesuit will tell you to power off the tablet by pressing power button for 10 seconds.
once the device is off press and hold any button except power button .
Then connect the tablet to the computer using your usb cable.
press power button 10 times quickly.
The device will now go to recovery mode(If I am correct)
Then the usb will try to find the driver automatically for upgrade(I am using windows 7 so it found driver automatically)
Then it will update the firmware if you are lucky.....
Sorry for my bad english.....
Fix From Another Post
I found a solution, hopefully this can help someone in the future
The problem was i installed busybox using an installer which causing some file discrepancies.
To fix it :
1. Install Android Terminal Emulator, this app can be installed even if storage shows full. If you cant install the terminal use Uniflashv2 (open uniflashv2 and connect your device with the debug usb on, go to rom modding, then file manager)
2. copy /system/xbin/busybox to /system/bin, if busybox is installed the code is "busybox cp /system/xbin/busybox to /system/bin"
3. power off then power on (reboot)
When I did the above, all my previous apps and setting came back to normal
jeewa19 posted this fix, and it helped/ was my exact problem. I hope this helps others as well :cyclops:
Hi Guys,
I'm looking for some help to obtain root access to my T-Hub 2 tablet running on Gingerbread.
Please read my following text file and venture your opinions on my thoughts.
We as owners/users of T-Hub 2 devices require sensible answers to important questions.
We need usb drivers for the T-Hub 2, either from Telstra or from Technicolor the manufacturer of the device so that we can attain " ROOT ACCESS" via a usb cable connection to a computer.
Unless we can get "ROOT ACCESS" we cannot move applications to an external SD card (32 GB in my case) or use Titanium Backup or certain Antivirus programs that require "ROOT ACCESS".
Please accept the undeniable fact that 1 Gigabyte of storage on the internal SD card is totally insufficient and pathetic, almost as pathetic as the fact that we are still stuck with "Gingerbread" which puts us three versions behind on Android which is now up to "JellyBean" v2.
The fact is, I believe the Android operating system running on the T-Hub 2 is, like all other versions of Android, based on the Linux kernel which is software using the GNU General Public License, which allows people to see, copy, use, and modify for their own needs.
If indeed I am correct in my assumption then Telstra/Technicolor could be in breach of a world standard which would mean that the proprietary blocks and gates that they have built to prevent access to the kernel on the T-Hub 2 are illegal.
Download Mode discovered...and more...
I recently downloaded a program to backup my phone called "Moborobo".
I realized I was able to use it's built in "file manager" to see the entire file structure of the T-HUB 2's operating system, a bit like "root explorer".
I am able to copy files from here, although I still don't have root access to copy any files back in.
And in regards to download mode.....
I have discovered it is possible to get into download mode. It's still a 3 button method:
Hold "Volume-" and "Volume+" and "Power Button" to boot into download mode.
Not that this has helped me at all.
Odin certainly doesn't recognize this device. But maybe this information is useful to someone with more dev experience?
Hello, I am a Junior member (on 1/19/14). I have a XOLO Intel mobile, XOLO X910. I decided to buy this particular mobile after a very long time of comparing it to every other mobile in all aspects. It has beat the smartest smartphones even in price, at the time I bought it cost me just 9000 INR, equivalent to $150. But then came the real problems. The support for XOLO mobiles, is not so responsive. I actually knew this before buying it. But, who doesn't want to call support, when they cant find the correct drivers, can't connect your adb, and can't move your apps to SD Card.
Well, so I tried for myself on how to do these. I'll try to address most of these issues here, to help my Intel Xolo friends. This post is exclusive for Xolo phones, with Inel processors. And for Windows users.
There are no good drivers for Xolo available.
Yes there are no drivers from Xolo available. When we try to find drivers in their website, we will be redirected to the Intel android drivers' page. So we do not have much choice. We have to use the driver from Intel. There are two versions of it. (1.1.4 and 1.1.5). They claim that 1.1.4 works on windows 7 and lower,; 1.1.5 works on windows 8, and windows 8.1 has no support.
But I am using 1.1.4 for windows 8.1 successfully. I don't who or what is wrong at Intel Inc. The thing I have to say to you for now is that, Download both of them, and try both of them. There is a very good chance, that one of them will work.
Even with the Intel drivers, and USB debugging enabled, adb doesn't work.
Yes it didn't work for me, and it won't be a surprise it if doesn't for any other owner of Xolo Intel mobile phone. I checked almost all mobile and android forums, xda too, but all I have is bits and peices about why it does, and doesn't work. Some guy in the facebook, commented on a root request post, that he was able to have his adb recognize his mobile.
The thing is for most of the Xolo Intel phones, the "adb devices" command comes up with an empty list of devices attached even when we connect the mobile.
Here is the solution, worked for me. I don't know if it works for you. But, this method of making your drivers to recognize your mobile does not harm or brick your mobile in any way. I actually tried checking for the solution in intel forum, and ended up me giving them, the solution.
http:// software. intel. com/ en-us/ forums/ topic/ 277352 (Remove spaces)
the method I am posting here is the exact copy as in the intel QA page.
1. Install 1.1.4 drivers.
2. Connect mobile, Open device manager, it shows "Android Phone" with exclamatory mark!
3.Right click and open properties.Go to Details tab. In "property" select hardware id's. Remember the VID and PID. Xolo's VID for mine is 1D91, and my PID is AABC.
4. Open the intel drivers folder in program files. and open the *.ini file, replace VID 8087 (this is for Orange San Diego, intel needs to change that) with your VID, and also your PID.
5. You need to save those files, with admin previliges its possible.
6. Now remove and connect Mobile. Go to device manager. You may or may not see any changes. Right click and click update. Select Browse from my computer, and then Let me pick, you'll have 3 options "ADB", "Bootloader", "Composite", choose according to your use. After the update is success, restart everything.
7. Now possibly the adb devices command may show "List of devices attached" with empty list. If it shows your mobile ID, no problem. If it does'nt, then go to, "C:\Users\user_name\.android" folder, create a file named "adb_usb.ini" and type and save "0x1D91" in that file. it is the VID in hex . If you have a different VID use it.
8. I believe you then will be able to use your mobile in debugging. I did. I hope you do too. If its a success, please contact me.
So, I believe in one way or another, with one driver or another, you have success, using "adb devices" showing your device.
And the final problem, root your mobile, and/or move apps to SD card.
I did not find any rooting procedures for Intel XOLO X910 on internet. I've found some for X900, which I thought woudn't for me. And another one in xda forums, for X500. This rooting procedure does not involve, unlocking bootloader, installing new custom recovery, or flashing a new rom.
What this method does is, it pushes the su file into /system/xbin/ of your mobile.
The program I used is called the Cydia Impactor, they claim on their page that they use, the Master key exploit of the android, so it will work on 99% of the mobiles, well I got lucky I rooted my mobile. You can download the software from their page( around 11MB).
I AM NOT RESPONSIBLE FOR ANY BRICKING. DO THIS AT YOUR OWN RISK.
After downloading the software (assuming you adb works), just extract it,connect your mobile, open the Impactor executable, and click the start button. Done, the su is pushed into xbin. And voila, you are rooted.
But beware, this is x86 architecture, so if you try to install ARM only apps like busybox, chainfire 3D or some other cool ****, you may brick your mobile, (bootloop or bootanimation loop). Some have bricked them already, so do not do that. Atleast I suggest you don't.
How to move apps from Internal to External SD Card
In this category, I need some answers. Usually swapping, internal and external SD cards is a matter changing paths and labels in vold.fstab file. But unfortunately my mobile (IMO all intel mobiles) have three of those files. Named vold, voldeinternal and voldexternal, with the same extension fstab. I didn't try to edit any of them.
What I did try is "FolderMount". My main concern is about games larger than 1GB. So I place them on external SD Card and then mount them to either sdcard/android/data or sdcard/android/obb, so that I can play the game. I need suggestion for any improvements.
i have the solution to.internal memory problem
1. Download apex or nova launcher.
2. Go in widgets and add activities.
3. And in activities find "primary storage switch" select sd as default and thats it.
And thank u very much for root guide.......and can i install xposed tweaks and installer
And please join the group on facebook named xolo x910.!!!!
Kidding??
shadyvikrantsingh said:
1. Download apex or nova launcher.
2. Go in widgets and add activities.
3. And in activities find "primary storage switch" select sd as default and thats it.
And thank u very much for root guide.......and can i install xposed tweaks and installer
And please join the group on facebook named xolo x910.!!!!
Click to expand...
Click to collapse
You are kidding me, right. I am the admin of your group. And the nova hack is new, i've known in for a couple of days.
Cwm recovery possible????
Not yet..
Shubham Naithani said:
Cwm recovery possible????
Click to expand...
Click to collapse
I am looking into that too, unfortunately I did not find any recovery that has compatibility with this mobile. And also recovery has no use for us until we have some ROM to flash. So until we find a ROM, recovery is obsolete (except for taking backup of our own). By the way the bootloader is pretty firmly locked.
We cannot install Xposed framework
shadyvikrantsingh said:
1. Download apex or nova launcher.
2. Go in widgets and add activities.
3. And in activities find "primary storage switch" select sd as default and thats it.
And thank u very much for root guide.......and can i install xposed tweaks and installer
And please join the group on facebook named xolo x910.!!!!
Click to expand...
Click to collapse
Exposed framework is for ARM devices , doesn't support x86 architecture phone .
Aren't there any ROMS available for it?
And thanks rooting was successful.
And how can chain fire or ARM brick the phone?
Maybe, Congrats, IDK.!
4yush said:
Aren't there any ROMS available for it?
And thanks rooting was successful.
And how can chain fire or ARM brick the phone?
Click to expand...
Click to collapse
ROM's are not available that are specifically designed for the given mobile, but there emulator ROM's from intel, and android-x86 Rom's available. They may or may not work, But to install them we need them signed and also a custom recovery, which is not available for the time being for x86. Even then we didnt yet unlock the bootloader.
Congrats on your rooting your mobile, may it give you bliss and god bless.
I dont know buddy, if the chainfire app can brick or not the phone, i said it may brick. And I said that coz some intel user did some kinda experiments and bricked (bootloop or soft brick) his mobile, I was just warning ya, but you're welcome to try it out and post the results. I just didnt want to risk it, that is all. And to the "WHY" part. As they are two different arch's they have compatibility issues with the code/app.
I have a Intel (K900) but it's hard to root.
You are really knowledgeable..
Anvesh2013 said:
ROM's are not available that are specifically designed for the given mobile, but there emulator ROM's from intel, and android-x86 Rom's available. They may or may not work, But to install them we need them signed and also a custom recovery, which is not available for the time being for x86. Even then we didnt yet unlock the bootloader.
Congrats on your rooting your mobile, may it give you bliss and god bless.
I dont know buddy, if the chainfire app can brick or not the phone, i said it may brick. And I said that coz some intel user did some kinda experiments and bricked (bootloop or soft brick) his mobile, I was just warning ya, but you're welcome to try it out and post the results. I just didnt want to risk it, that is all. And to the "WHY" part. As they are two different arch's they have compatibility issues with the code/app.
Click to expand...
Click to collapse
How will the emulator work..?
And how did you mount the internal sd with external sd??
Is there any way that when we connect our cell phone to the computer instead of showing portable device we see removable disks..
And there is a fault.. All the images in the gallery are displayed 2 times and the music also.. Copy is displayed which doesn't function.. I tried system reseting but it went in vain..
It happens with me too
4yush said:
How will the emulator work..?
And how did you mount the internal sd with external sd??
Is there any way that when we connect our cell phone to the computer instead of showing portable device we see removable disks..
And there is a fault.. All the images in the gallery are displayed 2 times and the music also.. Copy is displayed which doesn't function.. I tried system reseting but it went in vain..
Click to expand...
Click to collapse
I too own a xolo x910 it too has same problem all songs in music player are repeated 4 times and images are too repeated
Temporary method
Pratham007 said:
I too own a xolo x910 it too has same problem all songs in music player are repeated 4 times and images are too repeated
Click to expand...
Click to collapse
What I do for the time being is I remove the ext. SD card, go to gallery and delete all the repeated images. But for the music it is hectic because. We can't choose multiple songs and delete them at. Once. We have to do it one by One which is very time Consuming. If you get resolved please let me know. I guess it happens when we connect it to. Our PC and delete. Something from the SD card.
ok
U r done by rooting ur phone kindly upload ur video on youtube so as we'll get a nice idea to root our x910 ur ideas r not working plzz uplaod
Something for you, better than nothing
I made a video of how to enable and access adb, not much but something's better than nothing right.
http://youtu.be/JeSVgyPvSyQ
Hello,
First time writing on the forum so please tell me if I do something wrong .So ,yesterday i've installed kubuntu on my nexus 7 , via platform tools (flashing img on fastboot).In kubuntu i have installed gpartition with terminal ,because i've saw that i only have 6 gig of free memory on 16 gig nexus 7 , and i wanted to know why.I opened it and when he finish analyze my tablet ,he find 15 gig of unalocatted space.So i decided to format that partition.After a minute he promted an error ,that he can't create disk label and adviced me to reboot before making any changes.After i closed all apps ,i rebooted my tablet , but something happened, she doesn't boot up any more.I tries diferent buttons combo,but she doesn't boot up,and i noticed that i can't access bootloader or custom recovery or fastboot.From some resources on internet i've found that it may be hard bricked.Can anyone tell me if is it hard bricked( i hope not) and if is it , how to solve that? I also want to add that i don't know to use nvflash , and i've never maked blob file backup. Can anyone pls help me?
Hi, I'm making a distribution of memory in a "Huawei Y550-L03" modifying SCETTERs, but when you plug the phone is thinking about the "MTK Droid Root & Tools 2.5.3" (indicator bar in yellow, then off) and get an error message saying the phone long wait was disconnected, I have to restart the phone to be re-recognized in the PC by the USB port, this makes me also with "Huawei G620S", both, with the "SuperSU 2.76 "installed. I have installed the Windows 10 64bit, I have been told that these programs run well under Windows 10 (with administration rights logically) do not understand what happens.
If I can not make the ROM image and get the SCETTERs, I can not get EBR1 and EBR2 files to modify and increase the internal memory, that is now 1GB (4GB total.) On mobile low and medium range.
What should I do? :crying:
Can you help me?
I climb a catch error! http://prntscr.com/c2jvjz, http://prntscr.com/c2jvgh, http://prntscr.com/c2jvcr, http://prntscr.com/c2jv23
Another thing, not all ROMs are in the portals ROMs, for example here or in other forum: http://www.needrom.com/, are Backups with EBRs inside, almost all these made with MD5, how does convert them to another format?
Whats another programs that do, or it is impossible?
Another program, different from "MTK Tools", that you can perform Backup ROMs and I can generate files EBRs format?
Thank you.