I want to mess with my cell phone's (LG KG300) operating system.
But how can i dump or mess with it? Should i start directly analyzing the circuit or should i try software techniques? show me a way. I am learning assembler and know enough about digital circuits
------------------------------------------
With LEO DOWNLOAD TOOL, can i dump my firmware or upload any other firmware to my phone via USB cable? or DO I need another type of cable?
I don't have a kg300. Read the service manual. And try!
I have tried it but it seems the serial communication driver doesn't work for windows 7. I guess I have to try on XP
I am trying to upgrade the firmware of KG300 but the DEVIAN TOOL does not recognise the cell phone (it doesn't show a COM port) in windows 7 64 bit. I guess the problem is because of the driver. Is there a solution or another way to do it?
Related
I have a Fujitsu P1120 touchscreen netbook. I have been trying to dual boot android with the windows xp that is on there but have had no success. I cannot seem to figure out the right way to put android on the hard drive. It keeps coming up with a grub error for invalid filesystem. I have downloaded liveandroid, android 86x. The main problem that I have is that my device doesn't support booting from usb, booting from network, or any usb external drive. So the only way I can get it to work is to manually install android but I don't know how to do that.
Can anyone help me with this please?
i have same problem , i want to install android on fujitsu p1120, but i see installation freezed, now i want to test froyo android
monedadeoro said:
i have same problem , i want to install android on fujitsu p1120, but i see installation freezed, now i want to test froyo android
Click to expand...
Click to collapse
i have tried everything that I can think of besides, network installation. I can't figure out how to set up the server to do it.
How version android x86 work in lifebook p1120?
The touch screen work in android?
I see the information about touch....
http :// ariescomputing .com/lifebook/
I so happy now.. i found one dvd-rw usb work very fast in the my fujitsu...
Is liteOn Slim USB (have 2 usb) dvd-rw and the bios work..
To put it bluntly you're trying to get your netbooks to do something it isn't intended to do. Those thing are built with the absolute bare minimum to do pretty much nothing more than browse the web, hence "netbook". It's not a full PC. Even the newer ones don't run a full version of Windows 7. Short of knowing how to re-write a BIOS image or finding a modified one and flashing it, which has the risk of perma-bricking your computer.
Волк,
Sorry my bad english..I have a good computer, phone and tablet. However I like to modify my old electronics giving new life to them .... Now for example I'll replace the HDD Fujitsu Lifebook P1120 IDE for SSD and I'll put a PCMCIA card with internal memory to speed up Windows. I installed windows 7 and it is working. So I had to make a modification in winsetup.dll to install.
At the moment I install Android but I am having difficulties.
Thanks evryone. I hope you can help me.
Yesterday ,I usual mobile phone to connect to the PC,
but,the pc tips me:"USB does not recognize(Unknow Driver)",
I've done a lot of action, including: replacement of data line, a replacement computer, but still no.
At present, the machine has been used for WIFI update to the official system 2.3.4.already unlocked,but unroot.
What am I to do to recover????Please help,thank you.
Not sure how to solve that problem, but perhaps you could delete any related drivers for your nexus s and try to install this driver after.
Weird that it won't be picked up by a different computer.
I have an older pc with no internet access that I want to root my moto g on. I plugged the phone in and the pc pooped up stuff saying it needed top install drivers. I couldn't get the phone to show up as a usb drive to get the drivers I had dled on the phone onto the pc. How can I get the drivers from the phone to the pc without the drivers being already installed? Can I dl an app that turns the phone into a generic usb drive or what? I was thinking of getting an usb otg and flash drive and copying the files to that then plugging into pc but I would hope for a free alternative if possible. I'm pretty broke. Also does anyone have any tips or advice on how to root/unlock broader of motto g x1034? I have the wind mobile Canadian version.
I'm using a windows xp pc with no internet.
So how do I get drivers onto pc with no internet
How do I root xt1034 moto g
What's the best/fastest rom to run on this phone
Where do I read to learn how to develop my own room?
What's a modified recovery? Can that help me root my phone without pc?
What have I missed?
tmw93 said:
I have an older pc with no internet access that I want to root my moto g on. I plugged the phone in and the pc pooped up stuff saying it needed top install drivers. I couldn't get the phone to show up as a usb drive to get the drivers I had dled on the phone onto the pc. How can I get the drivers from the phone to the pc without the drivers being already installed? Can I dl an app that turns the phone into a generic usb drive or what? I was thinking of getting an usb otg and flash drive and copying the files to that then plugging into pc but I would hope for a free alternative if possible. I'm pretty broke. Also does anyone have any tips or advice on how to root/unlock broader of motto g x1034? I have the wind mobile Canadian version.
I'm using a windows xp pc with no internet.
So how do I get drivers onto pc with no internet
How do I root xt1034 moto g
What's the best/fastest rom to run on this phone
Where do I read to learn how to develop my own room?
What's a modified recovery? Can that help me root my phone without pc?
What have I missed?
Click to expand...
Click to collapse
Have you tried connecting the phone in mass storage mode?
Now, to responds your answers in order:
So how do I get drivers onto pc with no interne
A: when you plug your phone it asks you the mode, instead of MTP switch to USB Mass Storage in the notification bar or in Settings>Storing (?)>USB Connection>USB Mass Storage.
How do I root xt1034 moto g
A: Look here ithe Q8.
What's the best/fastest rom to run on this phone
A: Look here. Sorry.
Where do I read to learn how to develop my own room?
It depends, first you need to own a room, is not enough to have a room with your name on it, you need to OWN it, make it a extension of you, decorate it with pictures of YOU... owning things with your picture on it, very empowering thing, right there. Then you develope it with good taste and decorations.
If you took a picture of it and want to develope it, you can do that in a red light or a very dark room.
You can join in a architect or a design school to start developing rooms, not only your own.
If you are referring to a ROM, you need a little background in programming and compiling source code, preferably in linux. If you'd like to experiment the basics, you can try to compile Cyanogenmod,following the guide in the wiki.
What's a modified recovery? Can that help me root my phone without pc?
a modified recovery is a recovery that's been altered from its original form.
nothing can help you to root your phone without a pc, adb and the drivers.
for a better understanding of what is a recovery, a custom recovery or other strange, make-up words and technobabble, read this.
Also, depending on the method used, you don't need to touch the recovery for rooting. But the easiest (according to me) is
see here.
What have I missed?
What have you hit?
If for what ever reason the KIES program installed on your computer is not connecting to your Android OS device OR KIES is not allowing the Andorid OS to upgrade or recover. I suggest the following:
Uninstall the KIES program from your computer.
Delete the CACHE of your computer. (For windows you have to search for diskcleanup// select Windows C drive// then make sure all the boxes are checked.//Click OK when ready then delete files[might take a while])
Then visit the samsung. com / us/ kies website and make sure( if your running android 4.2.2 or lower) to download the NORMAL KIES. Anything above 4..2.2 will require KIES 3.
When you have reinstalled the KIES program try connecting your device. If it does not work, change the USB cable to another compatible USB cable. (I don't suggest you go out and buy one just yet. Try any USB cable compatible with your Android Device which should work) If you don't have one buy a USB cable that is of high quality for your device(not any undervalued product).
The key principle here is to try and use a different USB cable from the one that you have been using previously to connect with your KIES program on your computer.
**NOTE**I am NOT liable for any damages or costs done by you.
However ANY question or comments are gladly welcomed.
Thank you.
I need to update the Bauhn Sphere AHD5-114 from V1.2 to V1.3 as this is a fix to repartition the device (only allows 1GB for apps, has 32GB storage).
Instructions to update, including driver files are here: https://onedrive.live.com/?cid=a25f...06&ithint=folder,zip&authkey=!ANnJGmqdleVuyX0
The Problem: The phone won't connect to the PC when the phone is off. It connects fine when on. I have tried 3 different computers and about 10 different charging cables, all using the drivers included in the folder.
It connects for 2 seconds then disconnects, windows tries to find a driver but comes up with 'device unplugged'.
Need to either fix connectivity issue or find another way to install the update (this method is with SP Flash Tool).
Note: phone is unrooted (tried Framaroot, SRSroot and Towelroot). Also I'm sure there's a fix somewhere but I've looked for hours, maybe using the wrong keywords but all I've found is connectivity issues with the phone on. All PCs have windows 7.
bump
Created this account to thank you for the files! A friend of mine has the 1GB limit issue, and I want to try their official fix first, before going to unofficial means. I'll try it and let you know what happens.
Not sure where you got with this. Initially I tried the upgrade on a Windows 7 laptop and ran into the same problem you did. The phone wouldn't stay connected. I noticed the instructions "highly recommended" doing the installation on a 32-bit Win XP machine. I gave it a try on a 32-bit WinXP machine and had the same issue. I left the software running, phone plugged in, then unplugged the computer-end of the cable and plugged it into a different USB port. It needed driver software installed, again, so I pointed it to where I'd unzipped the driver, it installed the driver (for the second time) and then the upgrade worked.
The phone is *far* more usable now, it seems that just about all the 32gb is available for app installation. This is how the phone should've been configured out-of-the-box, imo.
Thanks for making the installation software available for download. I couldn't get it from the bauhn site.