Hi, i think my phone is hard bricked or something, after updating to android 11 i lost root and the orangefox recovery wouldn't ask me for the decryption key, i tried flashing the custom recovery again but it didn't work, but somehow booting the recovery worked and tried to install magisk. Well after installing magisk, my phone got into bootloop. Everything ok as long as i could into recovery to format the phone if in any case something wrong happened, since i installed a custom recovery and a kernel, i decided to flash the stock rom, but then the MIflashtool said that it couldn't flash xbe file, for some reason i decided that i turning off the phone would be a great idea but it never powered on again. Also in my computer appears as Qualcomm HS-USB QDloader 9008, after several errors and mi unauthorized account i don't know what else to do. I investigated a little bit and i guess is into edl mode without using test points.
I hope someone can help me, thanks in advance
PS: I'm thinking on sending it to service center to fix it, but i'll lost my data. If i just could manage to boot into recovery i'd made a backup and later recover it.
i think you should send it to service center there is no other way the only way is flash the phone with edl
aymen peter said:
i think you should send it to service center there is no other way the only way is flash the phone with edl
Click to expand...
Click to collapse
That's what i going to do, don't want to mess with the phone more than i did. Thanks for the response.
Related
Hi, first off all i dont speak english very well.
I have a problem with phone i was stuck in bootloop and i tried to use twrp to restore sytem but i chose bad parition (boot, system and system image) those 3 and now i cant do anything. Only fastboot mode working. Pls guys can u help me. I was trying to use windows powershell to do sth but i cant run twrp image and now i dont know what to do. I have a nandroid backup on phone and on computer pls, can u help me???
I try to use qualcom brick tool but in device manager my device shows up us android bootloader interface
Possible solution
I had a problem where I softbricked my op6 by restoring an old system backup through twrp. My phone was stuck in fastboot mode. I was able to turn it off only when it wasn't connected to a pc or a charger.
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
It basically flashes everything you need onto your device. Your phone should be back to bone stock conditions software-wise after that
Download this
To unbrick your smartphone start the MSM Tool as Administrator. Turn off your phone and hold the volume up button and connect your phone to the computer. When you have done this, your phone should be recognized and flashed with the first ROM. Enclosed you find the Android P Rom as zip.
Download "https://1drv.ms/u/s!ApkcnumxOqfvhMBCFw0hvELIxADoNA"
Note: I accept no liability for failure and or possible damage
R4D0WS said:
To unbrick your smartphone start the MSM Tool as Administrator. Turn off your phone and hold the volume up button and connect your phone to the computer. When you have done this, your phone should be recognized and flashed with the first ROM. Enclosed you find the Android P Rom as zip.
Download "https://1drv.ms/u/s!ApkcnumxOqfvhMBCFw0hvELIxADoNA"
Note: I accept no liability for failure and or possible damage
Click to expand...
Click to collapse
I would recommend doing this operation, OP. For more reference, here's an XDA thread that talks all about recovering from Hard and Soft bricks using the MSM tool:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
HighOnLinux said:
I would recommend doing this operation, OP. For more reference, here's an XDA thread that talks all about recovering from Hard and Soft bricks using the MSM tool:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Click to expand...
Click to collapse
It´s the same one , but i have added the newest update in the .zip file.
Thanks for help guys, I used "MsmDownloadTool V4.0 International" and it solved my problem but i lost lots of data. There is a thread at xda forum, so if somebody have this problem too, you can use it but it's the last possible method to unbrick phone and you will lose everything what's was in your phone.
Recently I installed orange fox. It installed correctly. Then I try to clean install latest beta of xiaomi.eu but ended with error 7. I wiped cache delvik data and internal storage. So I try to reboot in system from OF. but my phone screen got black. Nothing just black. Now I am not able to boot in fastboot nothing and on connecting to PC it will some time detect as in COM edl mode but not able to flash fastboot rom from mi flasher and some times it suddenly disconnectes automatically. Please help.
youo will have to pay to get your device unbricked. I know a guy who does that through team viewer . contact me for more details
Tanish Mishra said:
youo will have to pay to get your device unbricked. I know a guy who does that through team viewer . contact me for more details
Click to expand...
Click to collapse
I want to contact you. I need that acc
You are getting EDL mode which is good because you can actually flash stock ROM through EDL mode, most of the time it is required to touch test points physically in order to enter into EDL mode. You'll need Qualcomm QDLoader HS-USB Driver, stock ROM image and MiFlash. Let me know if you need any further help.
nitish77 said:
You are getting EDL mode which is good because you can actually flash stock ROM through EDL mode, most of the time it is required to touch test points physically in order to enter into EDL mode. You'll need Qualcomm QDLoader HS-USB Driver, stock ROM image and MiFlash. Let me know if you need any further help.
Click to expand...
Click to collapse
Nope I said when I connect it to PC some times it connects in edl then again get disconnects not recognized by computer. And another thing mi flash does not allow to flash in edl without authorized I'd and password. So i think the only way to reach nearest service center after lockdown ends. Because its not possible to open back cover alone at home. Sad.....
Ok so my phone again get back to life. Yesterday as nearest center (30km away) opens and i reach there first they flash it through edl mode. But the screen is still black but phone boots up. Then they notice that flexi cable of LED screen have a cut. They said local repair shop did that. And i have to change combo which overall coasts me about ₹3600.
Moral of the story - if u hard bricked and not able to do anything at home never give ur phone to local repair shops they may damage the things and situations get worst. Just reach to service center they flash the rom which just coast ₹150. Now not gonna flash anything for some days. horrible experience!!!.
I was on Crdroid and wanted to get back into Miui since there was weekly miui 12 version now. Downloaded it and flashed it but it would not boot. I remembered on poco i had that i needed to flash latest miui andro 9 before flashing latest miui andro 10 for some reason so i got back into twrp and did it. After reboot it went into some sort of boot loot and i lost any recovery and fastboot. Cant get into edl for that matter also. Anyone has any suggestion?
Can you elaborate a bit more, when you try to boot into fastboot with the button combination, does it work?
Do you get any indications when trying to turn on your phone?
malimukk said:
Can you elaborate a bit more, when you try to boot into fastboot with the button combination, does it work?
Do you get any indications when trying to turn on your phone?
Click to expand...
Click to collapse
Button combination gives me blank screen and revovery gives MI logo and just that until it rebots and stays like that in some loop. I can get into test mode after opening it to try QFill flashing but i forgot about account authorisation thing. I do not have any type of service center in my country that wants to deal with this. Issue is probably due to anti rollback policy in 2s. So i need solution to flash somehow thru qualcomm port but aparently only wth that account that has authorisation.
Thats where i got till now. Spent a whole day also at 4pda trying to find solution but nothing there worked for me
scudteshka said:
Button combination gives me blank screen and revovery gives MI logo and just that until it rebots and stays like that in some loop. I can get into test mode after opening it to try QFill flashing but i forgot about account authorisation thing. I do not have any type of service center in my country that wants to deal with this. Issue is probably due to anti rollback policy in 2s. So i need solution to flash somehow thru qualcomm port but aparently only wth that account that has authorisation.
Thats where i got till now. Spent a whole day also at 4pda trying to find solution but nothing there worked for me
Click to expand...
Click to collapse
Oh that's unfortunate! I think that in this case you will need to find someone with an authorized account that will flash it for you remotely. There have been some people around here offering that service for a small fee but it might be worth paying as that might be the only way to fix it.
Same thing happend to me, first time i tried using custom rom. i dont know what exactly happened. i think its have something common with anti-rollback feature. I sent the divice to OFFICIAL service center.... I told them "use mi flash tool and authorised account to flash fastboot rom in edl" These OFFICIAL trained technicians... ehm idiots... change whole mother board.... atleast they count it as warrasnty repair.... there is one guy on reddit who succesfull unbricked his device via "shady bussines" (there is also contact on reddit page)... some guys offer xiaomi unbrick services via teamviewer. you can give it a try: https://www.reddit.com/r/Xiaomi/comments/ftix9v/shady_services_unbrick_with_mi_authorised_account/ EDIT: its last reply reddit (hope its allowed to post links)
note: you can put yr device in edl mode by pressing powerbutton. im not sure if its pressing or holding. (yr phone need to by connected to pc, then mi flash detect the phone if all drivers are instaled, it should be shown in "windows device manager" as PORT named "qualcomm hs-usb qdloader 9008")
if you dont have authorised acc. this will happen https://imgur.com/a/oJVpKEl so you need someone with authorised account who will unbrick yr phone via teamviewer [Sorry for my bad english]
Ijust dont understand why xiaomi dont allow user flashing in edl mode... or just make harder to brick phone... i had oneplus and i never bricked it. bricking xiaomi is just super easy thank to their stupid anti-rollback and other b****its. i will never use custom rom on xiaomi again. i will dont buy xiaomi again
Did you try the MI Flash app? ...try to fastboot and check if mi flash works
Also try fastboot(combo-buttons only) and see if you can see the phone (cmd -> fastboot devices) ...if you see a device then you are good to go
If you have a fastboot miui rom you can use my guide: https://forum.xda-developers.com/xiaomi-mi-mix-2s/help/weird-behavior-boot-loop-random-t4086703
It's like using MI flash program but doing it manually - if mi flash gives you issues or else
P.S. CMD MUST be with administrator rights of course!
Hi Guys,
got a big problem here today. after installing on orangefox a miui11 stable rom suddenly flashlight went on and it stopped to install it... i was like WTF? so i have go to reboot to the recovery and my mix 2s DIED.
now
1) battery is drained
2) no fastboot (black screen on vol down + power key)
3) no recovery (black screen on vol up + power key)
4) bootloop on miui logo
any idea?
Hello!
Sorry, I don't know vell ENG, so I use a translator.
Problem with Xiaomi Poco X3 Pro phone (Global Update 12.0.6.0.RJURUXM) + device unlocked
Unsuccessfully decided to flash the phone... I got the POCO X3 PRO and POCO X3 NFC phones mixed up a bit. I downloaded the firmware from the POCO X3 NFC and put it on the POCO X3 PRO via TWRP recovery. Then I tried to return everything as it was, but I couldn't. Accidentally via the TWRP menu formatted the System + partition Cache + Data and a few more sections, I don't really remember. At this stage, the phone was still functioning, turned on and rebooted in the recovery - TWRP menu. Then I tried to return the old recovery menu and connect Fastboot, but I couldn't. The phone turned into a brick. The phone does not turn on, does not work, the "POCO" logo does not appear, there is no way to go to recovery and Fastboot. The battery charge at that time was 46%...
HOWEVER, my computer sees the device as an emergency communication channel through the COM4 port - Qualcomm HS-USB QDLoader 9008 port
I'm already desperate and don't know what to do or what the instructions are... I don't want to open the phone and put it in EDL mode (if it helps at all)
I contacted a person with a service account, tried to restore the phone through the application "MiFlash_1212" by bypassing authorization and obtaining KEYS and access (I did not quite understand this point and how it works).
As a result, the firmware was able to run and the device began to be requested. But the following problem appeared, which I do not know how to solve, and that person stopped helping me (he has no time and simply does not want to, even though I paid him with money)
I read a lot of information on the form. Many tips and instructions did not help me.
What do I need to do? Who can I contact for help?
I wanted to get ROOT access (Magisc + YouTube Vanced + remove ads)
PS : But first I need to bring my phone back to life...
"I downloaded the firmware from the POCO X3 NFC and put it on the POCO X3 PRO via TWRP recovery."
-Why you put x3 nfc firm on x3 pro?
I guessed that you would ask about this moment.
It was my mistake and I thought they were the same.
And when the phone did not turn on properly, only THEN DID I REALIZE that I had downloaded the wrong files.
But what should I do?
Nitritus said:
"I downloaded the firmware from the POCO X3 NFC and put it on the POCO X3 PRO via TWRP recovery."
-Why you put x3 nfc firm on x3 pro?
Click to expand...
Click to collapse
I hope you find some help here
abood.mhd said:
I hope you find some help here
Click to expand...
Click to collapse
As they say : "Hope dies last" =((
Chances are you will still be able to unbrick it by playing with fastboot and using normal miflash
For the firmware go and search on mifirm device code vayu or poco x3 pro download the fastboot rom it should be in .tgz format
Unzip it and then put it into miflash l, switch the phone to fastboot mode by pressing volume up + power button at the same time
Hopefully that would do the trick or you can just go and ask xiaomi repair center since this case should still be within warranty
Contact your nearest Customer Support Center. They will fix the problem
Hassle free, just go straight to customer service.
If you still want to work on this, fine.
Its a stretch but is fastboot function restored?
If yes, download the fastboot image (not recovery) of your phone region, skip the miflash application and run the flash_all+lock script. The .bat file.
Make sure you get the right version for your phone and your region.
From the logs, wouldn't really be surprised if you still have no fastboot access.
Looks like the guy scammed you.
Sure he indeed have the right edl authentication but he only did his job halfway and bailed as your phone are still loading in edl mode.
thenameisJEFF said:
Chances are you will still be able to unbrick it by playing with fastboot and using normal miflash
For the firmware go and search on mifirm device code vayu or poco x3 pro download the fastboot rom it should be in .tgz format
Unzip it and then put it into miflash l, switch the phone to fastboot mode by pressing volume up + power button at the same time
Hopefully that would do the trick or you can just go and ask xiaomi repair center since this case should still be within warranty
Click to expand...
Click to collapse
I wrote that it does not turn on, does not go to fastoot, does not go to recovery, does not respond to charging, the indicators do not blink
xelrix said:
Hassle free, just go straight to customer service.
If you still want to work on this, fine.
Its a stretch but is fastboot function restored?
If yes, download the fastboot image (not recovery) of your phone region, skip the miflash application and run the flash_all+lock script. The .bat file.
Make sure you get the right version for your phone and your region.
From the logs, wouldn't really be surprised if you still have no fastboot access.
Looks like the guy scammed you.
Sure he indeed have the right edl authentication but he only did his job halfway and bailed as your phone are still loading in edl mode.
Click to expand...
Click to collapse
The phone did not turn on and fastboot and recovery do not enter any mode. The service can accept it, but it is clearly no longer under warranty and the price can be set very high.
WoodenSKY said:
The phone did not turn on and fastboot and recovery do not enter any mode. The service can accept it, but it is clearly no longer under warranty and the price can be set very high.
Click to expand...
Click to collapse
This is likely because you might have format some important part as IMEI number. Like this guy said: https://forum.xda-developers.com/t/no-imei-and-no-wifi-plss-help.4276823/post-85014473
In this state, no matter what you do, you have to pay.
https://forum.xda-developers.com/t/poco-x3-pro-hard-bricked.4277803/post-85025433
The most safe way is Xiaomi repair support center. High charge, but for sure a working phone.
my poco x3 pro global stable(VAYU) is stuck in miui log i tired to flash it with magisk method now its stuck ther. any one can help me with it
WoodenSKY said:
I wrote that it does not turn on, does not go to fastoot, does not go to recovery, does not respond to charging, the indicators do not blink
Click to expand...
Click to collapse
Straight to service center you go then )
It should still be within warranty becuz they only refuse hardware error not software brick
Beside it shouldn't cost much tbh
i did this mistake with my brand new galaxy s6 when it came out but the only solution i had was going to repair shop and the dude used a hardware tool called octoplus and he flashed it and worked but i lost my original imei adress but it worked i did search for you i found the tool you need is ufi box google it contact them and see if you get one or find a repair shop by the way i repaired that s6 with 10bucks
unfortunately, your only option is service centre as they are the only one who can get access to phone via edl mode and flash what was formatted
Just to be sure, I asked customer support and they said the following... "By installing custom ROM, Recovery, and/or Rooting your phone, the warranty is not void. However if your phone bricks while installing a custom ROM, then the warranty is considered void". They adding insult to injury for you
My Vayu is stuck on QUSB_BULK in device manager, I don't even know what to do?
True ayush Kushwaha said:
My Vayu is stuck on QUSB_BULK in device manager, I don't even know what to do?
Click to expand...
Click to collapse
same here, did you manage to fix yours?
Hi. My phone is realme 5 pro and I've been using custom rom recently and decided to go back to stock rom. I was successfully able to go back to stock rom and then tried to flash a custom kernel which destroyed my boot.img . I was confused on what to do and accidentally locked my bootloader. Now my phone will only turn on and turns off for around 20 seconds. I can't perform fastboot, recovery mode, or open my device. I did some research and found that the only way to restore my device from its state is using edl mode(which I don't know how to use). I follow some tutorials about edl and I was able to make my device appear as "QUALCOMM HS-USB QDLoader 9008" and doesn't know what to do next.
Can I still be able to revive my device without going to a repair shop? And if possible, can you guide me?
Any answers will be appreciated!
To flash device in EDL mode you need to use msm tool then flash your stock ROM.
You need proper driver to use msm tool with your device while in EDL mode.
If you're not sure what you're doing then just give it to a professional.
Goodluck.
I brick realme 5 last year and I give it to repairing shop they opened whole parts and fixed why how that happens?
SAAAAAMMMEE Problem !! did you find a fix ?