Hi. My phone is realme 5 pro and I've been using custom rom recently and decided to go back to stock rom. I was successfully able to go back to stock rom and then tried to flash a custom kernel which destroyed my boot.img . I was confused on what to do and accidentally locked my bootloader. Now my phone will only turn on and turns off for around 20 seconds. I can't perform fastboot, recovery mode, or open my device. I did some research and found that the only way to restore my device from its state is using edl mode(which I don't know how to use). I follow some tutorials about edl and I was able to make my device appear as "QUALCOMM HS-USB QDLoader 9008" and doesn't know what to do next.
Can I still be able to revive my device without going to a repair shop? And if possible, can you guide me?
Any answers will be appreciated!
To flash device in EDL mode you need to use msm tool then flash your stock ROM.
You need proper driver to use msm tool with your device while in EDL mode.
If you're not sure what you're doing then just give it to a professional.
Goodluck.
I brick realme 5 last year and I give it to repairing shop they opened whole parts and fixed why how that happens?
SAAAAAMMMEE Problem !! did you find a fix ?
Related
I was on Masik X 4.1. Phone was working just fine.
I downloaded Masik X 5, installed it over 4.1. Flashing goes very well but at the end phone become dead.
No response on USB, No Driver on PC at all. Phone is complete dead.
Just noticed that I mistakenly downloaded "Masik P Tulip.zip" and flashed it blindly. There was no warning regarding File Mismatch in TWRP.
Very very bad luck.
I manged to bring phone into EDL Mode by testpoint method. Phone flashed successfully with both Qfil and Miflash.
Flashed many many times, tried all files available on different threads but phone is now permanently stuck in EDL mode and dont reboot after successful flashing.
Phone flashed successfully every time but I cant get rid of EDL Mode aka Qdloader 9008.
Plz help me to get my phone out of Qdloader 9008 mode.
Anybody please help me.................................
press power button for more than 30 seconds to get out of edl mode.
yawarniazi said:
I was on Masik X 4.1. Phone was working just fine.
I downloaded Masik X 5, installed it over 4.1. Flashing goes very well but at the end phone become dead.
No response on USB, No Driver on PC at all. Phone is complete dead.
Just noticed that I mistakenly downloaded "Masik P Tulip.zip" and flashed it blindly. There was no warning regarding File Mismatch in TWRP.
Very very bad luck.
I manged to bring phone into EDL Mode by testpoint method. Phone flashed successfully with both Qfil and Miflash.
Flashed many many times, tried all files available on different threads but phone is now permanently stuck in EDL mode and dont reboot after successful flashing.
Phone flashed successfully every time but I cant get rid of EDL Mode aka Qdloader 9008.
Plz help me to get my phone out of Qdloader 9008 mode.
Anybody please help me.................................
Click to expand...
Click to collapse
AFAIK , there's no such things as "automatically reboot after successfully flashed the device"
I was also in this condition but with different phone (it was Redmi 4 Prime (markw)), and all I did is just disconnect the battery form the circuit and then replug it, then I can boot to the system successfully
Hope it helps, but if it isn't then maybe something wrong
Recently I installed orange fox. It installed correctly. Then I try to clean install latest beta of xiaomi.eu but ended with error 7. I wiped cache delvik data and internal storage. So I try to reboot in system from OF. but my phone screen got black. Nothing just black. Now I am not able to boot in fastboot nothing and on connecting to PC it will some time detect as in COM edl mode but not able to flash fastboot rom from mi flasher and some times it suddenly disconnectes automatically. Please help.
youo will have to pay to get your device unbricked. I know a guy who does that through team viewer . contact me for more details
Tanish Mishra said:
youo will have to pay to get your device unbricked. I know a guy who does that through team viewer . contact me for more details
Click to expand...
Click to collapse
I want to contact you. I need that acc
You are getting EDL mode which is good because you can actually flash stock ROM through EDL mode, most of the time it is required to touch test points physically in order to enter into EDL mode. You'll need Qualcomm QDLoader HS-USB Driver, stock ROM image and MiFlash. Let me know if you need any further help.
nitish77 said:
You are getting EDL mode which is good because you can actually flash stock ROM through EDL mode, most of the time it is required to touch test points physically in order to enter into EDL mode. You'll need Qualcomm QDLoader HS-USB Driver, stock ROM image and MiFlash. Let me know if you need any further help.
Click to expand...
Click to collapse
Nope I said when I connect it to PC some times it connects in edl then again get disconnects not recognized by computer. And another thing mi flash does not allow to flash in edl without authorized I'd and password. So i think the only way to reach nearest service center after lockdown ends. Because its not possible to open back cover alone at home. Sad.....
Ok so my phone again get back to life. Yesterday as nearest center (30km away) opens and i reach there first they flash it through edl mode. But the screen is still black but phone boots up. Then they notice that flexi cable of LED screen have a cut. They said local repair shop did that. And i have to change combo which overall coasts me about ₹3600.
Moral of the story - if u hard bricked and not able to do anything at home never give ur phone to local repair shops they may damage the things and situations get worst. Just reach to service center they flash the rom which just coast ₹150. Now not gonna flash anything for some days. horrible experience!!!.
Hi, i think my phone is hard bricked or something, after updating to android 11 i lost root and the orangefox recovery wouldn't ask me for the decryption key, i tried flashing the custom recovery again but it didn't work, but somehow booting the recovery worked and tried to install magisk. Well after installing magisk, my phone got into bootloop. Everything ok as long as i could into recovery to format the phone if in any case something wrong happened, since i installed a custom recovery and a kernel, i decided to flash the stock rom, but then the MIflashtool said that it couldn't flash xbe file, for some reason i decided that i turning off the phone would be a great idea but it never powered on again. Also in my computer appears as Qualcomm HS-USB QDloader 9008, after several errors and mi unauthorized account i don't know what else to do. I investigated a little bit and i guess is into edl mode without using test points.
I hope someone can help me, thanks in advance
PS: I'm thinking on sending it to service center to fix it, but i'll lost my data. If i just could manage to boot into recovery i'd made a backup and later recover it.
i think you should send it to service center there is no other way the only way is flash the phone with edl
aymen peter said:
i think you should send it to service center there is no other way the only way is flash the phone with edl
Click to expand...
Click to collapse
That's what i going to do, don't want to mess with the phone more than i did. Thanks for the response.
Hello XDA Members,
Please help me i have hard bricked oneplus 8 IN2017 Tmobile while installing Custom pixel Experience ROM
and now MSM tool Unbrick tool not working its shows download complete but phone is not booting after showing oneplus logo phone goes to EDL mode.
also i am not able to flash stock fastboot rom because bootloader is locked. Please help me how to unbrick this phone
Try MSM again, on a different PC and with a different USB cable *if* you can.
Aside from that contact OnePlus.
Was this your first time using MS download tool? Have you succesfully flashed to stock with MSM before?
yes i have used msm many times and tried on different PCs nothing is working
msm tool shows successfully download complete and now i am receiving this error (PIC attached)
i think i have messed up partitions.
Greetings everyone. I didn’t find a thread for this specific phone model. So I am putting it up here. Few days back I decided to unlock the bootloader of my LG W41 (LM-K610IM) and upgrade to a custom ROM. So, I used fastboot mode to unlock the bootloader and up until now everything went like a dream. Problems started when I couldn't get a TWRP recovery for my specific model. I downloaded a generic one and first tried to push it to my recovery partition. That's when I learned my phone doesn't have a recovery partition. I don't know what came to me then I used fastboot flash command to flash the TWRP image to my boot partition. It was successful but my phone won't start after that. It was a softbrick. Only the LG logo started bootlooping. But the worse was still not over. In an attempt to restore my device I searched everywhere for the stock ROM as the official website is down, but couldn't find any. At last, I zeroed in on a similar device by the same manufacturer LG K52. It had the ditto hardware like LG W41. Even the model number was similar. So, I downloaded the KDZ file. Extracted the dz from the kdz and the boot.img from the dz using LG KDZ extractor . Made a scatter file using a Hovatek instruction and using WWR MTK tool and formatted my device using SP flash tool and flashed everything. Till now my device was detected by the Windows 11 PC as a LGE device. Anyways the SP tool successfully flashed everything but after that my won't turn on any more. It's total dead. It won't power on, pc won't recognize it. I have tried connecting using USB and all possible hardware key combinations. It is dead bricked I think. All because of my stupidity. Now my question is, does it have any hope left or should I throw it away and buy a new device? I am keeping my fingers crossed and hope to find a superhero
Edit 1: SP Flash tool doesn't see my device any more. I have all the specific drivers installed. From LG and from Mediatek.
Try LG Bridge or check lg-firmwares.com
or
buy/borrow second device and 1:1 clone with mtkclient
Thanks for the quick response, but I have already tried LG Bridge, LGUP . After soft brick LGUP was seeing device as "unknown at COM Port 9". After hard brick it doesn't see it any more. Actually my PC won't see the device anymore
The firmware is not available at LG-firmwares.com but I have requested for it there. Keeping fingers
you should be able to repair preloader from bootrom mode (BROM)
How to enter bootrom mode. I am sorry if it is a noob question
Soumyadip999 said:
How to enter bootrom mode. I am sorry if it is a noob question
Click to expand...
Click to collapse
XRed_CubeX said:
To put your device in BRom mode you may need a different key combination or a test point, find out on the internet how to put the device in BRom mode or ask various devs of that device
Click to expand...
Click to collapse
find KCOL0 test point and short to GND
https://forum.hovatek.com/thread-11802.html
Okay let me ask and I will follow up. Thank you for the amazing guidance. Let's see if the poor device could be saved
you should poll lsusb in linux while trying to connect usb with both vol keys pressed. disconnect battery from pcb if possible to ensure phone is off.