Heyy guys can someone help me unbrick my op6, I've done it a couple of times before but this time is different, device is not showing in msmTool, qualcomm 9008 driver is installed. Device is stuck in fastboot mode no recovery or anything else is available
@accordeuro06 Thread close as duplicate of
Unbricking OP6
Heyy guys can someone help me unbrick my op6, I've done it a couple of times before but this time is different, device is not showing in msmTool, qualcomm 9008 driver is installed. Device is stuck in fastboot mode no recovery or anything else is...
forum.xda-developers.com
that you created a few minutes later.
And if you're unhappy with what you've posted, please do not create a new thread or post. Simply use the "Edit" button left in the lower row and edit your post accordingly.
Stay safe and stay healthy!
Regards
Oswald Boelcke
Senior Moderator
Related
So i bricked my Gpad 8.3 during a bad flash. I have attempted to access it with every tool i could find, and the only things that can access it are ones that use qualcomm drivers. It is in something called bulk mode (9008 specifically) which requires the qualcomm qhsusb driver. Two tools i have tried can interact with the device one found in this thread: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830. The tool in the OP has my chipset and can run tests on my device with the 3.99 version, but fails at the SDRAM test. I have also tried the restore boot image with this program to no avail.
The other is QPST a manufacturer program that i do not know how to use. I know QPST can place the device into download mode and has the ability to flash images, but i don't know anything else about it. On google there are guides for other phones to fix them being bricked so i am hopeful there is something i can do with this program.
Can anybody help me out with this? I'm stuck
Hi
Thanks for writing to us at XDA Assist. I can see you've also asked the same question here:
Gpad bricked, what can I do?
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. You're receiving help there so I'll close this thread and let you continue there.
Thread closed, thanks.
I Need some serious help.... I Flashed the wrong rom on the wrong phone. I can't get it do a complete reboot but I can get into the download mode but everything have tried does not work and even adb commands does not work. I just keep getting a message that says only Samsung binary are allowed to boot so I am wondering if there is a program that I can do a real reformat and not a reset. If I can do a reformat then I could install the right system back on it.... ? am I right. If anyone could help me with this problem I will be very thankful for your help and time. The phone is a snapdragon S 20+ SM-S205DL.
@harleyusa59
Thread close as duplicate of
Binary
I Need some serious help.... I Flashed the wrong rom on the wrong phone. I can't get it do a complete reboot but I can get into the download mode but everything have tried does not work and even adb commands does not work. I just keep getting a...
forum.xda-developers.com
that you created a few minutes earlier.
Maybe you can already find more information in this forum:
Samsung Galaxy S20 / S20+ / S20 Ultra
Samsung Galaxy S20 is a 6.2" phone with a 3200×1440p resolution display. The Qualcomm Snapdragon 865/Exynos 990 chipset is paired with 12GB of RAM and 128/256GB of storage. The main camera is 12+12+64MP and the selfie camera is 10MP. The battery has a 4000mAh capacity.
forum.xda-developers.com
And if you're unhappy with what you've posted, please do not create a new thread or post. Simply use the "Edit" button left in the lower row and edit your post accordingly.
Stay safe and stay healthy!
Regards
Oswald Boelcke
Senior Moderator
Hello everyone, I unlocked my bootloader, but unfortunately I made an error when unlocking it but flashing it. so that he writes me when starting qualcom crashdump mode. and I don't know how to get out of it. also where I get the original onplus6 t software. and i work with linux via terminal. who can help me with this? on the one hand, where can I get the original os9 andriod software? and the second question is how I get the whole thing back on my cell phone and that it comes out of this warning from the grass dump
@carrabelloy Thread closed as duplicate of your post here that you've created in this already existing thread:
Oneplus 6T hard bricked to g.co/abh loop
hi yesterday i was far from home with 5% battery and i take some calls some photos and battery 0% when i got home i plugged in and battery is too laow message screen appear and after the message: The boot loader is unlocked and software integrity...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, create a post only ONCE and do NOT create a new thread if a subject matter related one already exists. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the bootloader or I think even EDL. I've tried the Lenovo recovery tool and the Moto all-in-one tool, but essentially all I get now is a black screen.
Any input on what I can do to either diagnose and possibly recover my device? I have the original firmware downloaded, but without being able to get to the bootloader, recovery, or even EDL, I'm at a loss as to how to proceed. I did grab a blankflash for the device, but I'm not clear on how to begin to use that to move forward.
Thanks for any advice you can provide.
-Ryan
@dagey Thread closed as duplicate of
Recover bricked moto stylus 5g after flashing TWRP
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! You'd initially posted the still open thread in the "Moto G Stylus (2021)" device forum, out of which I've moved it. If you realise that you posted something wrongly just report it, and we're happy to support.
By the way: Usually, I'd even to close the still open thread as even that is a simple duplicate of your post here!
Regards
Oswald Boelcke
Senior Moderator
Hello, I have a small problem with ZTE BLADE A7 2019 phone, I can not get into fastboot, it immediately returns me to the system.. In the settings for the developer, I have enabled OEM unlock.
I tried command like at ,,adb reboot bootloader" ,,adb reboot fastboot"
None of that worked, I tried going to the bootloader in the recovery menu, how else it didn't work either, and it immediately returned me to the system :/ I'm sad that it doesn't work, any ideas please ?
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Matyas66055 said:
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Click to expand...
Click to collapse
@Matyas66055 Thread closed as you've already created a subject matter related thread:
zte a7 blade 2019 instant switch to os from fastboot*
Hi, i am loading booting to bootloader from adb with commnad (adb reboot bootloader) this isnt working, only restart :( its instantly switch to normal os, any ideas ?
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, post only ONCE, post in an already existing thread, and if required edit your thread instead of creating a new one. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator