Hello, I have a small problem with ZTE BLADE A7 2019 phone, I can not get into fastboot, it immediately returns me to the system.. In the settings for the developer, I have enabled OEM unlock.
I tried command like at ,,adb reboot bootloader" ,,adb reboot fastboot"
None of that worked, I tried going to the bootloader in the recovery menu, how else it didn't work either, and it immediately returned me to the system :/ I'm sad that it doesn't work, any ideas please ?
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Matyas66055 said:
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Click to expand...
Click to collapse
@Matyas66055 Thread closed as you've already created a subject matter related thread:
zte a7 blade 2019 instant switch to os from fastboot*
Hi, i am loading booting to bootloader from adb with commnad (adb reboot bootloader) this isnt working, only restart :( its instantly switch to normal os, any ideas ?
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, post only ONCE, post in an already existing thread, and if required edit your thread instead of creating a new one. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Related
Hi everyone,
Hope I'm not breaking the rules but I'm desperate. I've Struggled to unlock my phone's bootloader and now I'm trying to change the bootloader. This is my first Android device and my first attempt to install Cyanogen. As I said I'm stuck with adb commands, I googled for hours and I didn't find a clear guide until I installed SDK from Google I managed to use them on my pc, the problem is that it can't detect my device. When I prompt adb devices it doesn't show anything, help please :crying::crying:
PS
The guide I'm following is this one
EDIT:
I managed to enter fastboot but when I try to install TWRP it says "target reported max download size", I tried also to fastboot erase cache but it gives me error. Help!
sanshoo said:
Hi everyone,
Hope I'm not breaking the rules but I'm desperate. I've Struggled to unlock my phone's bootloader and now I'm trying to change the bootloader. This is my first Android device and my first attempt to install Cyanogen. As I said I'm stuck with adb commands, I googled for hours and I didn't find a clear guide until I installed SDK from Google I managed to use them on my pc, the problem is that it can't detect my device. When I prompt adb devices it doesn't show anything, help please :crying::crying:
PS
The guide I'm following is this one
EDIT:
I managed to enter fastboot but when I try to install TWRP it says "target reported max download size", I tried also to fastboot erase cache but it gives me error. Help!
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist and here is no forum specifically for the Huawei G620S at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. First, though, consider simply posting in the thread where you found the guide that you are attempting to follow.
Good luck!
Mod edit: @Pi0312 Thread closed as duplicate of
How to unbrick Huawei P20 Lite ANE-LX1?
Hello there, I managed to unlock the bootloader and the FRP for the Huawei P20 Lite ANE-LX1 (which was on emui 9) Then I flashed Twrp-3.5.2_9-0. It worked fine for a while. But when I tired "Wipe data", it got stuck with "Formating f2fs, Done"...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! If you discover that you posted in the wrong forum, do NOT create a new thread but simply report your thread to allow us to move it. Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Hello there,
I managed to unlock the bootloader and the FRP for the Huawei P20 Lite ANE-LX1 (which was on emui 9)
Then I flashed Twrp-3.5.2_9-0.
It worked fine for a while. But when I tired "Wipe data", it got stuck with "Formating f2fs, Done" for 1hour.
So I rebooted the device with volume down + power.
When I try to get back in TWRP, it's getting stuck at the logo and there is also no access to eRecovry, it says "booting now" undefinitely.
And of course no access to the stock rom which says the same thing "booting now" undefinitely.
I also tried fastboot erase system and flashing older version of twrp but they all get stuck at the logo.
I still have acces to the fastboot mode with bootloader unlock + FRP unlock.
Is there a way to unbrick the device?
Let me know if you need any additional info.
Thank you in advance.
Hello everyone, I unlocked my bootloader, but unfortunately I made an error when unlocking it but flashing it. so that he writes me when starting qualcom crashdump mode. and I don't know how to get out of it. also where I get the original onplus6 t software. and i work with linux via terminal. who can help me with this? on the one hand, where can I get the original os9 andriod software? and the second question is how I get the whole thing back on my cell phone and that it comes out of this warning from the grass dump
@carrabelloy Thread closed as duplicate of your post here that you've created in this already existing thread:
Oneplus 6T hard bricked to g.co/abh loop
hi yesterday i was far from home with 5% battery and i take some calls some photos and battery 0% when i got home i plugged in and battery is too laow message screen appear and after the message: The boot loader is unlocked and software integrity...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, create a post only ONCE and do NOT create a new thread if a subject matter related one already exists. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the bootloader or I think even EDL. I've tried the Lenovo recovery tool and the Moto all-in-one tool, but essentially all I get now is a black screen.
Any input on what I can do to either diagnose and possibly recover my device? I have the original firmware downloaded, but without being able to get to the bootloader, recovery, or even EDL, I'm at a loss as to how to proceed. I did grab a blankflash for the device, but I'm not clear on how to begin to use that to move forward.
Thanks for any advice you can provide.
-Ryan
@dagey Thread closed as duplicate of
Recover bricked moto stylus 5g after flashing TWRP
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! You'd initially posted the still open thread in the "Moto G Stylus (2021)" device forum, out of which I've moved it. If you realise that you posted something wrongly just report it, and we're happy to support.
By the way: Usually, I'd even to close the still open thread as even that is a simple duplicate of your post here!
Regards
Oswald Boelcke
Senior Moderator
поз I unlocked the lenovo bootloader via adb and installed twrp and after that I boot into recovery, but the tablet starts up in the system with the inscription orange state what to do
qwelix said:
поз I unlocked the lenovo bootloader via adb and installed twrp and after that I boot into recovery, but the tablet starts up in the system with the inscription orange state what to do
Click to expand...
Click to collapse
@qwelix Thread closed as subject matter related duplicate of
Orange state lenovo tb x606f lenovo tab fhd plus m10
вhello to everyone who can help, I put tvrp and boot into the system and the tablet sees orange state what to do tb x606f
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator