Question [CLOSED] Recover hard brick after trying to install TWRP - Moto G Stylus 5G

Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the bootloader or I think even EDL. I've tried the Lenovo recovery tool and the Moto all-in-one tool, but essentially all I get now is a black screen.
Any input on what I can do to either diagnose and possibly recover my device? I have the original firmware downloaded, but without being able to get to the bootloader, recovery, or even EDL, I'm at a loss as to how to proceed. I did grab a blankflash for the device, but I'm not clear on how to begin to use that to move forward.
Thanks for any advice you can provide.
-Ryan

@dagey Thread closed as duplicate of
Recover bricked moto stylus 5g after flashing TWRP
Hey guys, I recently rooted my stylus 5g and went to install TWRP. I was able to get it to boot to TWRP, but I believe within TWRP I did the flash wrong as now my device is hard bricked. I cannot get it to show the initial logo, get to the...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! You'd initially posted the still open thread in the "Moto G Stylus (2021)" device forum, out of which I've moved it. If you realise that you posted something wrongly just report it, and we're happy to support.
By the way: Usually, I'd even to close the still open thread as even that is a simple duplicate of your post here!
Regards
Oswald Boelcke
Senior Moderator

Related

[Q] LG G2 Bootloop (D801 T-Mobile)

Alright So, I'm Not new to rooting nor Installing custom Roms or Recoveries, I have done plenty times before with different phones, However, Upon greed, I came across an F320L ROM (which is the Korean variant) So I thought to myself What is the worst that can happen? And of course. Fast-boot Mode.
So I got stuck into fast-boot mode, Having previous experience, I was able to get out, Only to accidentally delete my TWRP recovery while I was doing the command lines.
My plan was to delete the old partitions with fast-boot, and Reflash the original Ones, Get into my recovery, Then Reflash Cloudy G3 2.2 for My phone so I can begin using it, This was not the case.
I accidentally Deleted my recovery with the command [: Fastboot erase Recovery] So now TWRP Is GONE, And I have done a factory reset but to No avail.
I was attempting to use the LG flash tool ETC and it saw no success, And Yes I can Access download mode and Factory Reset (But the reset just returns me to the bootloop)
My issue? No Drivers. I need someone to tell me how to get my drivers onto a phone thats been bootlooped Or if this is a done deal and I have to ship it back to LG for a replacement. I hope someone can assist Me. Reply ASAP.
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
T-Mobile LG G2
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
T-Mobile G2 Q&A, Help & Troubleshooting
Good luck!

[Completed] RCA Tablet Hard-brick help

I recently bricked my RCA tablet while modifying the boot file in the device's system folder. It was stuck in a bootloop so I followed the directions in another forum to use SP Flash tool and flash it to reinstall the stock rom. While following those instructions to the T, it seems that my device will now no longer boot, won't charge, and is not recognized by my computer (all the symptoms of a hard-brick as I am told). I followed a brief fix explained by a self-help forum within hovatek to use the SP Flash tool to only flash the preloader file just to try and get the device to boot again, but not even that worked. I would like to know what else there is I can do to fix it or if there's no other option but to send it back to the factory. I am using a RCT6773W22 Tablet w/ V38-V1.8.0
Hello,
Welcome to XDA.
Try following what you find in the thread linked below, maybe it will help.
http://forum.xda-developers.com/general/general/stock-rom-twrp-root-oc-uv-rca-7-voyager-t3087075
If that doesn't help, try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Thank you, the first link you gave me was actually the first thread that I followed to fix my tablet when it was still soft-bricked. Which then led to it becoming hard-bricked. I shall try and repost in the second link you gave me when I get the chance.

[CLOSED]How to unbrick Huawei P20 Lite ANE-LX1?

Mod edit: @Pi0312 Thread closed as duplicate of
How to unbrick Huawei P20 Lite ANE-LX1?
Hello there, I managed to unlock the bootloader and the FRP for the Huawei P20 Lite ANE-LX1 (which was on emui 9) Then I flashed Twrp-3.5.2_9-0. It worked fine for a while. But when I tired "Wipe data", it got stuck with "Formating f2fs, Done"...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! If you discover that you posted in the wrong forum, do NOT create a new thread but simply report your thread to allow us to move it. Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Hello there,
I managed to unlock the bootloader and the FRP for the Huawei P20 Lite ANE-LX1 (which was on emui 9)
Then I flashed Twrp-3.5.2_9-0.
It worked fine for a while. But when I tired "Wipe data", it got stuck with "Formating f2fs, Done" for 1hour.
So I rebooted the device with volume down + power.
When I try to get back in TWRP, it's getting stuck at the logo and there is also no access to eRecovry, it says "booting now" undefinitely.
And of course no access to the stock rom which says the same thing "booting now" undefinitely.
I also tried fastboot erase system and flashing older version of twrp but they all get stuck at the logo.
I still have acces to the fastboot mode with bootloader unlock + FRP unlock.
Is there a way to unbrick the device?
Let me know if you need any additional info.
Thank you in advance.

[CLOSED]Oneplus 6T hard bricked to g.co/abh loop

Hello everyone, I unlocked my bootloader, but unfortunately I made an error when unlocking it but flashing it. so that he writes me when starting qualcom crashdump mode. and I don't know how to get out of it. also where I get the original onplus6 t software. and i work with linux via terminal. who can help me with this? on the one hand, where can I get the original os9 andriod software? and the second question is how I get the whole thing back on my cell phone and that it comes out of this warning from the grass dump
@carrabelloy Thread closed as duplicate of your post here that you've created in this already existing thread:
Oneplus 6T hard bricked to g.co/abh loop
hi yesterday i was far from home with 5% battery and i take some calls some photos and battery 0% when i got home i plugged in and battery is too laow message screen appear and after the message: The boot loader is unlocked and software integrity...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, create a post only ONCE and do NOT create a new thread if a subject matter related one already exists. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

[CLOSED] ZTE BLADE A7 2019 fastboot mode missing ?

Hello, I have a small problem with ZTE BLADE A7 2019 phone, I can not get into fastboot, it immediately returns me to the system.. In the settings for the developer, I have enabled OEM unlock.
I tried command like at ,,adb reboot bootloader" ,,adb reboot fastboot"
None of that worked, I tried going to the bootloader in the recovery menu, how else it didn't work either, and it immediately returned me to the system :/ I'm sad that it doesn't work, any ideas please ?
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Matyas66055 said:
// This is my second post about this, I wanted to rewrite it all, thanks for understanding
Click to expand...
Click to collapse
@Matyas66055 Thread closed as you've already created a subject matter related thread:
zte a7 blade 2019 instant switch to os from fastboot*
Hi, i am loading booting to bootloader from adb with commnad (adb reboot bootloader) this isnt working, only restart :( its instantly switch to normal os, any ideas ?
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5, post only ONCE, post in an already existing thread, and if required edit your thread instead of creating a new one. Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

Categories

Resources