Samsung recovery
Code:
samsung a12zh/a12
10/QP1A.190711.020/A125FZHU1AYC3
user/release/keys
Install /sdcard/A12/stock/A125FXXU1AUC3_A125FOLM1AUC3_XSA.zip ...
Finding update package ...
Opening update package ...
Verifying update package ...
E: Footer is wrong
Update pkacage verification took 0.1s (result 1).
E: Signature verification failed
E: Error 21
Install from SD card completed with status 2.
Installation aborted. #1
PNG and TGY were also failed like is, but if reflashing stock ROM using Heimdall, which partitions are to be flashed accoring to the PIT on my A12? And which partitions should never be touched?
Even with successful flashes using Heimdall, it still always reports to me SW REV check failed
Now my device is still being boot-looped, and on either YouTube or online text tutorials nothing is about solving the boot loops for my A12
And have also retried to flash my own builds of TWRP instead, https://sourceforge.net/p/twrp-samsung-a12/code/ci/master/tree/out/target/product/a12, however also unfortunately somewhy,
Code:
Heimdall mode (High speed)
Product name: SM-A125F
...
Warranty void: 0x1 (0x500)
RP SWREV: B1 NS1 K1 S1
...
SW REV check fail: [recovery] Fused 1 > Binary 2
SW REV check fail: [boot]Fused 1 > Binary 0
Me again.. Ive obtained the same problem and solved it just reflashing my whole firmware with Odin u_u
I’ve just flashed the full firmware.
The SW REV check failures were fixed, but my device is still being boot looped
What to do next?
My A12 has MTK chipsets (according to my CPU-Z), hence also their ‘‘secure’’ boot locks, now going to unlock it by their SPFlashTool
speedmetal444 said:
Me again.. Ive obtained the same problem and solved it just reflashing my whole firmware with Odin u_u
Click to expand...
Click to collapse
Heimdall flashes are always by PIT partitions; PIT means partitioning informative tables
Odin flashes, on the other hand, are instead more by tar packages, namely BL, AP, CP, and CSC
* BL = BootLoaders; AP = Android PDA’s i.e. systems with also recoveries; CP = Core PDA’s i.e. modems; CSC = Country support codes or Consumer software customizations
I’m still being boot looped due to sth in unknown errors named PDP
Code:
Android recovery
samsung/a12nsxx/a12
11/RP1A.200720.012/A125FXXU1BUE3
...
Supported API: 3
# MANUAL MODE v1.0.0#
No commands specified
-- Wiping data ...
Formatting /data ...
E: [PDP] lstat /c___/pdp_b__: 0 - No PDP scenario
Formatting /cache ...
Formatting /metadata ...
Formatting /keydata ...
Formatting /keyrefuge ...
Data wipe complete.
hd_scania said:
Samsung recovery
Code:
samsung a12zh/a12
10/QP1A.190711.020/A125FZHU1AYC3
user/release/keys
Install /sdcard/A12/stock/A125FXXU1AUC3_A125FOLM1AUC3_XSA.zip ...
Finding update package ...
Opening update package ...
Verifying update package ...
E: Footer is wrong
Update pkacage verification took 0.1s (result 1).
E: Signature verification failed
E: Error 21
Install from SD card completed with status 2.
Installation aborted. #1
PNG and TGY were also failed like is, but if reflashing stock ROM using Heimdall, which partitions are to be flashed accoring to the PIT on my A12? And which partitions should never be touched?
Even with successful flashes using Heimdall, it still always reports to me SW REV check failed
Now my device is still being boot-looped, and on either YouTube or online text tutorials nothing is about solving the boot loops for my A12
And have also retried to flash my own builds of TWRP instead, https://sourceforge.net/p/twrp-samsung-a12/code/ci/master/tree/out/target/product/a12, however also unfortunately somewhy,
Code:
Heimdall mode (High speed)
Product name: SM-A125F
...
Warranty void: 0x1 (0x500)
RP SWREV: B1 NS1 K1 S1
...
SW REV check fail: [recovery] Fused 1 > Binary 2
SW REV check fail: [boot]Fused 1 > Binary 0
Click to expand...
Click to collapse
The error at the last is probably because the firmware you are trying to flash has older bootloader than what it is currently and it looks like you cannot downgrade bootloader.
I
Related
need anyone advice and help.. for my problem..
sir, i want ask help.. my gadget samsung gt-p1000 had problems..
it just power on and shut down by itself.. and stuck in samsung logo.. and repeat power on again..
when i'm using recovery boot mode something occure :
the enter key for boot mode should be home key.. but in mine gadget.. become OK key, i can't use my home key to enter...
this condition too :
-- Verfing internal MMC block...
checksum confirmation -> check(1)
the # of partition : 3
part(1) BR_ChkSum in header : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) BR_checksum : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) DATA_Chksum in header : 696EA8F29ECB20C45B97B704AD543871
part(1) DATA checksum : 2184010839EB3D021EED0BB7EC395B51
E: part(1) DATA Checksum Error
E: part(1) Checksum Error
Internal MMC checksum verify failed.
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'XSE'.
Successfully updated multi-CSC.
keitagusy said:
need anyone advice and help.. for my problem..
sir, i want ask help.. my gadget samsung gt-p1000 had problems..
it just power on and shut down by itself.. and stuck in samsung logo.. and repeat power on again..
when i'm using recovery boot mode something occure :
the enter key for boot mode should be home key.. but in mine gadget.. become OK key, i can't use my home key to enter...
this condition too :
-- Verfing internal MMC block...
checksum confirmation -> check(1)
the # of partition : 3
part(1) BR_ChkSum in header : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) BR_checksum : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) DATA_Chksum in header : 696EA8F29ECB20C45B97B704AD543871
part(1) DATA checksum : 2184010839EB3D021EED0BB7EC395B51
E: part(1) DATA Checksum Error
E: part(1) Checksum Error
Internal MMC checksum verify failed.
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'XSE'.
Successfully updated multi-CSC.
Click to expand...
Click to collapse
I have the same thing! found any solution?
Please help
DEVICE NOTE EDGE SM-N915F
I have only access to Download Mode
No Recovery or Functional ROM installed
Problem: Every time it says "There is no Pit Partition"
Already tried Install with Odin (AP_N915FXXU1BOA2.tar and TBLTE_EUR_OPEN.pit) But Same Error.
-----------------------------------------------------
ODIN MODE
Product Name: SM-N915F
Current Binary:Custom
System Status:Custom
Reactivation Lock: Off
Knock Warrenty Void: 0x1 (4)
Qualcomm Secure Boot: Enable (CSB)
AP SWREV : S1 T1 R1 A1 P1
Secure Download: Enable
UDC Start
ODIN Flash Read Failure
Error: There is no PIT Binary
Secure Check Fail: PIT
ODIN: Flash Read Failure
-----------------------------------------------------
Are you flashing only PIT and AP, or the full set: PIT, BL, AP, CP and CSC?
Sent from my SM-N915G using Tapatalk
i am receiving this same issue. is there any way you can assist as i am a first time samsung user?
I am Having same issue on my Samsung Galaxy Note Edge.
Initial attempt failed with invalid ext4 image error. Tried with PIT file and re-partitioning, but same error occurs, resulting in recovery loops. Any help or insight appreciated..
reflash with odin princecomsy
Hi, recently my mom tried to root her galaxy S7 but she made a mess, so, Now this Galaxy S7 has FRP Lock ON, When we try to Factory reset It gets stuck in boot screen and there is a message saying "E: Failed to clear BCB message: failed to find /misc partition"
I tried flashing a stock rom but FRP blocks it...
I tried even every other solution i've seen in the forum but nothing helped
Mobile stuff that can be useful:
Product-Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0 (0x0000)
RP SWREV: B:2 K:0 S:0
Recovery Mode Stuff:
samsung/heroltexx/herolte8.0.0/R16NWG930FXXU2ERE8
Errors i see in recovery mode:
#Fail to open recovery_cause(No such file or directory)#
#Reboot Recovery_Cause is [UNKNOWN]#
no Support SINGLE-SKU
File-Based OTA
Supported API: 3
#Manual Mode V1.0.0#
Successfully Verified dmverity hash tree
E: Failed to clear BCB message: failed to find /misc partition
Can anyone help this messy phone?
Thanks for your replies
Every time I use Odin to install TWRP I get a failure.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did set USB Debugging ON.
Tried both Odin Options > Auto reboot ON and OFF.
I've tried different cables (no change),
different versions of Odin (Odin3_v3.10.7, Odin3 v3.11.1, odin3-v3.12.4_4),
3 different date versions of TWRP plus redownloads (twrp-klte.tar, twrp-3.3.1-0-klte.img.tar, twrp-3.6.0_9-0-klte.img.tar),
and a factory reset on the phone.
Other than this the phone seems top work fine. I did successfully do this a couple of years ago, but it doesn't work now.
The phone screen says:
ODIN MODE
PRODUCT NAME: SM-900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 8x8
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
I did try multiple times to install so S C FAIL x 4
Is something wrong with the phone?
What else can I do?
The TWRP site gives five different downloads for the S5 depending on the phone you have.
Always choose the right and latest one.
I found a wonderful description of the way you should act using Odin and TWRP
The description is for the S8 but the installation is practically the same.
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Give it a try on your S5.
Hope this might help you .
drkenrich1688 said:
Every time I use Odin to install TWRP I get a failure.
<ID:0/004> recovery.img
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did set USB Debugging ON.
Tried both Odin Options > Auto reboot ON and OFF.
I've tried different cables (no change),
different versions of Odin (Odin3_v3.10.7, Odin3 v3.11.1, odin3-v3.12.4_4),
3 different date versions of TWRP plus redownloads (twrp-klte.tar, twrp-3.3.1-0-klte.img.tar, twrp-3.6.0_9-0-klte.img.tar),
and a factory reset on the phone.
Other than this the phone seems top work fine. I did successfully do this a couple of years ago, but it doesn't work now.
The phone screen says:
ODIN MODE
PRODUCT NAME: SM-900A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 8x8
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S1, T2, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
SECURE CHECK FAIL: recovery
I did try multiple times to install so S C FAIL x 4
Is something wrong with the phone?
What else can I do?
Click to expand...
Click to collapse
If already fixed then please let us know how you did it ... with some details.
I no longer have this problem. I upgraded to a Moto G7.
I did read the link above and it sounds interesting. I would definitely try it if I still had the Galaxy S5.