Related
I have Huawei Mate 7 MT7-L09 with official Android 6.0 C432B571 from here, bootloader unlocked and rooted.
The phone seems to be a bit laggy in general use, when working with apps etc. Is there any way how to improve it? I changed battery mode from intelligent to perfromance, which helped a bit, but I still feel that the phone with such hardware should perform better. I have LG G4 that should theoretically have similar performance (at least by Antutu), but it runs much smoother.
In addition, fingerprint sensor doesn't work reliably for me so I had to turn it off. And sometimes lock screen is not responding to touches at all after waking up the phone and I have to wait tens of seconds until it starts working (I use unlock gesture).
I am not sure whether the issues are caused by the ROM itself or some Huawei power saving features. Which ROM is the best for this phone? Do you also have some of the issues described?
Hi
I have exact the same issues and asked in different Boards ... But I don't get any functional response ...
Interesting...but good to know that I am not alone Did you test any other ROM or Android version? I got this phone a month ago, so I went directly to Android 6.0 and didn't try others...
lapist said:
I have Huawei Mate 7 MT7-L09 with official Android 6.0 C432B571 from here, bootloader unlocked and rooted.
The phone seems to be a bit laggy in general use, when working with apps etc. Is there any way how to improve it? I changed battery mode from intelligent to perfromance, which helped a bit, but I still feel that the phone with such hardware should perform better. I have LG G4 that should theoretically have similar performance (at least by Antutu), but it runs much smoother.
In addition, fingerprint sensor doesn't work reliably for me so I had to turn it off. And sometimes lock screen is not responding to touches at all after waking up the phone and I have to wait tens of seconds until it starts working (I use unlock gesture).
I am not sure whether the issues are caused by the ROM itself or some Huawei power saving features. Which ROM is the best for this phone? Do you also have some of the issues described?
Click to expand...
Click to collapse
Hi,
A few things i did to make my Mate7 a bit snappier:
- in Phone Manager > Battery > Protected Apps, I added apps that i use alot, so that the phone doesnt close them, so starting them up again is quicker as they are still in RAM
- switch to Nova launcher, as it seems to be much smoother than the default launcher
- if you're rooted, i installed L Speed from the play store, and tinkered around with some settings there - seems to have sped up the phone alot
lapist said:
I have Huawei Mate 7 MT7-L09 with official Android 6.0 C432B571 from here, bootloader unlocked and rooted.
The phone seems to be a bit laggy in general use, when working with apps etc. Is there any way how to improve it? I changed battery mode from intelligent to perfromance, which helped a bit, but I still feel that the phone with such hardware should perform better. I have LG G4 that should theoretically have similar performance (at least by Antutu), but it runs much smoother.
In addition, fingerprint sensor doesn't work reliably for me so I had to turn it off. And sometimes lock screen is not responding to touches at all after waking up the phone and I have to wait tens of seconds until it starts working (I use unlock gesture).
I am not sure whether the issues are caused by the ROM itself or some Huawei power saving features. Which ROM is the best for this phone? Do you also have some of the issues described?
Click to expand...
Click to collapse
Dear use Custom rom share by ale95,in rom there's a future tune cpu and gpu it'll help you to improve your device performance but every action make reaction if you want performance you'll have battery draining issues..
fazi2015 said:
Dear use Custom rom share by ale95,in rom there's a future tune cpu and gpu it'll help you to improve your device performance but every action make reaction if you want performance you'll have battery draining issues..
Click to expand...
Click to collapse
Which ROM do you mean? "Ale95 KangVip V3.5" or "Honor 6 Plus KangVip Full Port" or something else? Is it better than stock ROM? What is the difference between those two?
lapist said:
I have Huawei Mate 7 MT7-L09 with official Android 6.0 C432B571 from here, bootloader unlocked and rooted.
The phone seems to be a bit laggy in general use, when working with apps etc. Is there any way how to improve it? I changed battery mode from intelligent to perfromance, which helped a bit, but I still feel that the phone with such hardware should perform better. I have LG G4 that should theoretically have similar performance (at least by Antutu), but it runs much smoother.
In addition, fingerprint sensor doesn't work reliably for me so I had to turn it off. And sometimes lock screen is not responding to touches at all after waking up the phone and I have to wait tens of seconds until it starts working (I use unlock gesture).
I am not sure whether the issues are caused by the ROM itself or some Huawei power saving features. Which ROM is the best for this phone? Do you also have some of the issues described?
Click to expand...
Click to collapse
B514 is quite an old version of Android 6 for the Mate 7. Why don't you try upgrade to a newer version first, like B560? Alot of bug fixes were made in newer version which solved battery and performance issues.
cege987 said:
B514 is quite an old version of Android 6 for the Mate 7. Why don't you try upgrade to a newer version first, like B560? Alot of bug fixes were made in newer version which solved battery and performance issues.
Click to expand...
Click to collapse
B514? I have B571, right?
B560 RAM usage
So I have the b560 fw running on my mt-l09. But while closing apps in multitask I became aware the system uses massive amounts of RAM, is this normal? Upon closing all apps it states it has 800 - 900 MB free from the 2 GB available. Any suggestions? Thanks a lot.
sfq86 said:
So I have the b560 fw running on my mt-l09. But while closing apps in multitask I became aware the system uses massive amounts of RAM, is this normal? Upon closing all apps it states it has 800 - 900 MB free from the 2 GB available. Any suggestions? Thanks a lot.
Click to expand...
Click to collapse
That is quite normal I guess...
Hi guys,
I've been browsing multiple forums and have tried multiple solutions to get Android running as a second OS next to Windows 10 but haven't been able to get a stable working touchscreen.
I see a few posts saying that Bliss has added drivers for the Microsoft Surface touchscreens. I've tried multiple installations containing the tag "surface-pro-4" and "sp4". My findings are that the touchscreen is indeed working after installation, however it stops working after a while. Sometimes a minute after I boot up without doing anything, sometimes during a game, it seems completely random.
I've also tried different versions of the Phoenix OX, which gives me exactly the same issues. I've been searching the interwebs and found more people with this issue. I also found some posts of people claiming they have been able to stabalize the touchscreen, however I haven't been able to get in contact with them.
I'm pretty new to Android when it comes to running the OS on an x86 machine, but I know my way around Linux. If there's anything that should be modified I'd like to hear your thoughts as well. I don't need a complete how-to, just some directions for what to look for and I'll figure it out.
When I look at the issue, my gut points me to power saving options. However the fact that the screen so randomly stops working is not really in line with this thought.
My question: Has anyone managed to get a stable version of Android running on the Surface Pro 4 with a working touchscreen? If so, could you let me know which image you used for installation? I don't really care about the Android version (it doesn't have to ben 8.1), as long as I can get it running stable (not too old of course).
I'd love to hear your experiences or thoughts on this.
Thanks in advance, if anyone needs more information, please let me know and I'll be happy to supply.
Should I get it working at some point, I'd be more than happy to write a full how-to and post it here on the forums.
Kind regards.
I have one dual booting Bliss and working well. You'll need a bleeding edge rom. I'm running Bliss-v10.1-Beta-android_x86_64-OFFICIAL-20180602-1820_k4.16.8-ipts-blissified-ath_18.1.0-devel_w14_sp4.iso. In fact, I'm posting this from my Surface Pro running Bliss.
daze62 said:
I have one dual booting Bliss and working well. You'll need a bleeding edge rom. I'm running Bliss-v10.1-Beta-android_x86_64-OFFICIAL-20180602-1820_k4.16.8-ipts-blissified-ath_18.1.0-devel_w14_sp4.iso. In fact, I'm posting this from my Surface Pro running Bliss.
Click to expand...
Click to collapse
What do I need to do to boot the dual (win10-Android)
daze62 said:
I have one dual booting Bliss and working well. You'll need a bleeding edge rom. I'm running Bliss-v10.1-Beta-android_x86_64-OFFICIAL-20180602-1820_k4.16.8-ipts-blissified-ath_18.1.0-devel_w14_sp4.iso. In fact, I'm posting this from my Surface Pro running Bliss.
Click to expand...
Click to collapse
Did you install a different kernel or just the blissOS rom mentioned? Thx
Running as is. A few caveats from 3 months use: 1. Battery usage is not monitored; 2. Seems to run the processor flat out, so battery life is not great and the tablet runs on the warm side; 3. Buttons don't work, so no external volume control and powering off takes a long button hold to force shut down; 4. You'll need the keyboard attached to select boot options.
The rom I'm using has been moved.
https://sourceforge.net/projects/blissos-x86/files/Official/
I've been looking at later builds, but they seem complicated to set up.
For me, I'm using surface pro 2017 (which I think not really different from the sp4) running phoenix os. It works fine but without Bluetooth, warm on the back, sleep mode doesn't work and there's no battery percentage (it's always 100%)
Try Prime OS (mainline) version on Surface Pro
I'm playing around with PrimeOS on SurfacePro1 in liveboot mode. Almost everything seems to be working well.
Pros
Bluetooth and wifi works
Hardware buttons work well.
Games like PubG run smoothly. Button mapping is baked into the ROM
Even the pen works with well. I've tried the skechbook Android app
*One note app says that it does not support Android app on Intel devices
Cons
Sleep mode does not work like it does on phones and tabs. It'll just turn the display black and it's probably still running. Screen bleeding is obvious which is a surfacePro1 issue.
Hi, anyone know how possible fix flicker on surface pro 4 i7 8gb ram? I try all from youtube.
battery drain when the surface pro 3 screen is turned off
gulams said:
I'm playing around with PrimeOS on SurfacePro1 in liveboot mode. Almost everything seems to be working well.
Pros
Bluetooth and wifi works
Hardware buttons work well.
Games like PubG run smoothly. Button mapping is baked into the ROM
Even the pen works with well. I've tried the skechbook Android app
*One note app says that it does not support Android app on Intel devices
Cons
Sleep mode does not work like it does on phones and tabs. It'll just turn the display black and it's probably still running. Screen bleeding is obvious which is a surfacePro1 issue.
Click to expand...
Click to collapse
hello, have you found a solution to drain the battery when you turn off the screen? my surf is the 3 pro
Hi,
how did you install this?
i cant install it.
i set safe mode off .
thx
Just like what I said in the title, I'm about to get a new screen replacement as I heard newer batches don't have any touch related issues. I'm a hardcore gamer and I think touch is very important for me when playing games.
Already 3 months and 'software fixes' regarding touches is not working great.
My phone is from september batch and running 8.12.27 beta and facing touch lags around edges.
Clean flashed 8.12.20 now more multi touches issues under notch.
Is there anyone else who already got a screen replacement?
Any issues like screen bleed/touch delay/multi touch and so on?
Under warranty??
Sent from my POCO F1 using Tapatalk
amitroutray said:
Under warranty??
Sent from my POCO F1 using Tapatalk
Click to expand...
Click to collapse
Yes
I also have the same problem but I'm on the stable Pie version of the ROM.
I still havent found any problem though. My screen does have a lil bit light bleed. Still,no touch issue yet.
buy a switch or something, you can consider yourself as ''hardcore gamer'' if you play un phone xD
I'm also facing touch lag around the edges.
The screen center is lag free though. Latest stable Pie didn't improve anything. I also have a little bit of screen bleeding around the notch.
Does the warranty cover this?
koax88 said:
I still havent found any problem though. My screen does have a lil bit light bleed. Still,no touch issue yet.
Click to expand...
Click to collapse
How about doing 'qi'test and see if it outputs iq on your Poco.
What ROM you using?
Any multi touch issues when playing tap intensive games like drums or MOBAs?
I think you might be wasting time because I'm pretty sure I've seen someone here or on Reddit say that they had their screen replaced and it did not fix the touch issue for them. Keep in mind after replacement that any of the beta releases from 8.11.23 on (except for the 8.12.27 update) have a new kernel which fixes the delay on the right and left edge and improves scrolling. So if you wish to test if the replaced screen did fix anything, use the stable ROM or the .27 beta to check that.
I must be one of the ones without the screen issue then.
Lel
What exactly is the touch issue?
I Got Armoured edition 128GB delivered yesterday itself. Updated it to MIUI 10.1.3.0 PIE and i am facing no issues as of now. No screen bleeding and no touch Issues.
I would like too to know how to detect those display issues.
mario123m said:
I think you might be wasting time because I'm pretty sure I've seen someone here or on Reddit say that they had their screen replaced and it did not fix the touch issue for them. Keep in mind after replacement that any of the beta releases from 8.11.23 on (except for the 8.12.27 update) have a new kernel which fixes the delay on the right and left edge and improves scrolling. So if you wish to test if the replaced screen did fix anything, use the stable ROM or the .27 beta to check that.
Click to expand...
Click to collapse
Ofcourse I'll use the Stable ROM to get a new screen instead using beta.
I can replicate those touch issues on Stable i.e touch delay on edges.
It'll be useless to ask for a screen replacement using a beta just to find out all the store did was just change it from Beta to Stable to 'fix' the touch issue lol.
Immortel.CZ said:
I would like too to know how to detect those display issues.
Click to expand...
Click to collapse
If you're on Stable pie, type 'qi' fast and most Pocos will output 'iq' even though pressed q first then i. This is touch delay issue.
If you're on 8.12.20 beta, theres screen freezes and multi touches under the notch if you tap and slide 2 finggers at the same button with a bit of force for it to occur. Screen freeeezes also happens where you cannot register ANY touches on the screen until you lock and unlock your phone
misleaded said:
If you're on Stable pie, type 'qi' fast and most Pocos will output 'iq' even though pressed q first then i. This is touch delay issue.
Click to expand...
Click to collapse
Well, I'm still not sure. Sometimes, I will do it quickly and output is "qi" but sometimes I do it quickly, output is "iq" but I'm not sure if I pressed "q" or "i" first, because of the speed. It's there any other way to prove it?
And if it have lags, who can feel those? Because I definitively not.
Immortel.CZ said:
Well, I'm still not sure. Sometimes, I will do it quickly and output is "qi" but sometimes I do it quickly, output is "iq" but I'm not sure if I pressed "q" or "i" first, because of the speed. It's there any other way to prove it?
And if it have lags, who can feel those? Because I definitively not.
Click to expand...
Click to collapse
'q' then 'i' super fast and make sure you know what you are pressing first.
Or you can try 'p' then 'e' quickly see if it comes as 'pe' or 'ep'
Every Poco have it. Forget about it and wait for the fix or just change to another device. If you're really hardcore, I'm assuming you a PUBG gamer, you should know that gyroscopic is the best way to aim on the game and the touch issue means nothing.
I can confirm by testing it, that switching from 8.12.27 to 8.12.10 touchscreen fw the delay is improved. At least, according to the maximum speed that I can type, performing the simple test of typing q and afterwards g or q and afterwards i, with the 8.12.10 is always printing on the screen the right order of the letters I ve typed, thus qg/qi, but on 8.12.27 always the outcome was gq/iq. My device is made on Oct.2018.
melodystyle2003 said:
I can confirm by testing it, that switching from 8.12.27 to 8.12.10 touchscreen fw the delay is improved. At least, according to the maximum speed that I can type, performing the simple test of typing q and afterwards g or q and afterwards i, with the 8.12.10 is always printing on the screen the right order of the letters I ve typed, thus qg/qi, but on 8.12.27 always the outcome was gq/iq. My device is made on Oct.2018.
Click to expand...
Click to collapse
Oh that's interesting. Some people here claim that newer batches don't have the touch problem yet you seem to have the exact same issue as my unit which was assembled in July 2018. Full four months and the issue still there... That is why I don't believe there are Poco users who don't have this problem.
mario123m said:
Oh that's interesting. Some people here claim that newer batches don't have the touch problem yet you seem to have the exact same issue as my unit which was assembled in July 2018. Full four months and the issue still there... That is why I don't believe there are Poco users who don't have this problem.
Click to expand...
Click to collapse
I just don't know.
It's just that maybe some units aren't affected.
I heard some random guy in the Poco reddit got a pocophone around September and bought another Poco for her little brother 2 months after that and what happened is his poco has touch issues while his little brother's doesn't have any.
That's why I thought I'm gonna get a new screen replacement
So much stuff OnePlus broke for no reason at all.
(This 1st point is for all OnePlus devices on Android 10)
1. The screen calibration from Android 9 was perfect! OnePlus broke it in literally every OnePlus device and made it hella uncomfortable to my eyes just to use the same damn phone. Vivid and all are dull and Amoled Wide Gamut is too damn harsh.
(I gave so many feedbacks but thanks to OnePlus's arrogant behaviour towards its customers and not fixing it)
2. GCams which made me love my OnePlus 6 are not working properly.
SuperResZoom is broken.
Gcam, only one version works now and can't use the cloned GCams which worked flawlessly on OOS 9.0.9, now just stops the HDR+ processing at 75% and other versions don't work on OxygenOS 10 but works fine on Android 10 custom roms.
(broke it for no reason at all!)
3. Auto Brightness takes painfully 10seconds+ just to adjust. (broke it for no reason)
4. 2.4ghz Wifi Link speed is still capped to 65mbps- 72mbps. After rooting and flashing a Magisk module namely "WIFI BONDING" the link speed goes upto 300mbps.
This issue I've only faced in my OnePlus 6 and my other phones like Redmi K20 Pro, Poco F1, Samsung Galaxy Note 9 all have 150mbps-300mbps by default.
(Again gave so much feedback yet no response from OnePlus)
5. Front camera now doesn't allow to zoom at all. (broke it for no reason) (not a big one tho)
6. Also Much worse battery life and slower charging times.
OOS 9 - 0-100% takes 72-75minutes.
OOS 10 - 0-100% takes 90-95minutes
Battery life - approx 12% per hour on OOS 9
Battery life - approx 18-20% per hour on OOS 10
Other than that OnePlus 7T does not have their own OxygenOS Special Navigation Gestures. Like what? Why? The little things that made me a loyal buyer and fan of OnePlus, they are just removing that for no reason?
I made my friend buy a OnePlus 7 Pro even tho I knew the prices would fall like crazy but I still asked him to get it at 53k because I trusted OnePlus and I was a genuine fan of their work and I loved their software, the lovely OxygenOS and the OnePlus brand which listened to their consumer's problems and then gives fixes.
But now I'm done.
Guess I'll stick to Android 9 on this OnePlus 6 and will get a S11 or anything else but OnePlus.
OnePlus is losing all their loyal fans by this stupiduty just like they lost me. I did recommend earlier but now definitely a big NO.
Let's see if they fix these or not. If they dont then surely a goodbye to them.
shubham7171 said:
So much stuff OnePlus broke for no reason at all.
(This 1st point is for all OnePlus devices on Android 10)
1. The screen calibration from Android 9 was perfect! OnePlus broke it in literally every OnePlus device and made it hella uncomfortable to my eyes just to use the same damn phone. Vivid and all are dull and Amoled Wide Gamut is too damn harsh.
(I gave so many feedbacks but thanks to OnePlus's arrogant behaviour towards its customers and not fixing it)
2. GCams which made me love my OnePlus 6 are not working properly.
SuperResZoom is broken.
Gcam, only one version works now and can't use the cloned GCams which worked flawlessly on OOS 9.0.9, now just stops the HDR+ processing at 75% and other versions don't work on OxygenOS 10 but works fine on Android 10 custom roms.
(broke it for no reason at all!)
3. Auto Brightness takes painfully 10seconds+ just to adjust. (broke it for no reason)
4. 2.4ghz Wifi Link speed is still capped to 65mbps- 72mbps. After rooting and flashing a Magisk module namely "WIFI BONDING" the link speed goes upto 300mbps.
This issue I've only faced in my OnePlus 6 and my other phones like Redmi K20 Pro, Poco F1, Samsung Galaxy Note 9 all have 150mbps-300mbps by default.
(Again gave so much feedback yet no response from OnePlus)
5. Front camera now doesn't allow to zoom at all. (broke it for no reason) (not a big one tho)
6. Also Much worse battery life and slower charging times.
OOS 9 - 0-100% takes 72-75minutes.
OOS 10 - 0-100% takes 90-95minutes
Battery life - approx 12% per hour on OOS 9
Battery life - approx 18-20% per hour on OOS 10
Other than that OnePlus 7T does not have their own OxygenOS Special Navigation Gestures. Like what? Why? The little things that made me a loyal buyer and fan of OnePlus, they are just removing that for no reason?
I made my friend buy a OnePlus 7 Pro even tho I knew the prices would fall like crazy but I still asked him to get it at 53k because I trusted OnePlus and I was a genuine fan of their work and I loved their software, the lovely OxygenOS and the OnePlus brand which listened to their consumer's problems and then gives fixes.
But now I'm done.
Guess I'll stick to Android 9 on this OnePlus 6 and will get a S11 or anything else but OnePlus.
OnePlus is losing all their loyal fans by this stupiduty just like they lost me. I did recommend earlier but now definitely a big NO.
Let's see if they fix these or not. If they dont then surely a goodbye to them.
Click to expand...
Click to collapse
Every single point is very very true!
Anyone having problem with screen cast. I think this one broken too. Cant connect to my LG TV using screen cast from QS and setting. But Youtube cast button works with no issue. Works perfectly before in android 9.
More reasons why i will stay on 9.0.9.....it just works!
They've already lost my trust, I've been with OnePlus since the op3, op6 now and this is my last one. I'm going with Xiaomi
This is why I am staying on 9.0.9 and have not attempted to once even try and upgrade to 10. I have 10 on my Pixel 2 XL, works FLAWLESSLY. OP has really dropped the ball here and if they continue on this path, I'll be looking for another phone in about a year when I want to upgrade that is made by someone else.
iskorotul said:
Anyone having problem with screen cast. I think this one broken too. Cant connect to my LG TV using screen cast from QS and setting. But Youtube cast button works with no issue. Works perfectly before in android 9.
Click to expand...
Click to collapse
Agreed! That problem is faced by me too! It isn't phone specific they messed up man.....
Screencast is woking fine on my end with samsung tv and QC. I am on beta 32.
Why my Gboard keyboard raised up for at least one key height?! Is that a bug?
Took me sometimes to fix the clipboard back thx Android Q...
iskorotul said:
Anyone having problem with screen cast. I think this one broken too. Cant connect to my LG TV using screen cast from QS and setting. But Youtube cast button works with no issue. Works perfectly before in android 9.
Click to expand...
Click to collapse
The only issue I have, that I know is, Google Photos app. It casts but stays at the splash screen. multiple chromecasts and built-in chromecast Toshiba TV.
Screen casts no issues here.
OB1-3 and stable 10.3.0
can I somehow disable the notification that a system update is available? I don't want to upgrade after reading this but the notification sticks and cannot be swiped away.
tox1 said:
Why my Gboard keyboard raised up for at least one key height?! Is that a bug?
Took me sometimes to fix the clipboard back thx Android Q...
Click to expand...
Click to collapse
No. That is indeed intended because google is featuring it's on gesture control by now and wants users to not trigger gestures while using the keyboard.
There is a rudimentary fix, you can google for it. But it involves messing around with adb to change the dpi or some kind of thing like that.
Ironic said:
No. That is indeed intended because google is featuring it's on gesture control by now and wants users to not trigger gestures while using the keyboard.
There is a rudimentary fix, you can google for it. But it involves messing around with adb to change the dpi or some kind of thing like that.
Click to expand...
Click to collapse
Thx for the answer dude! Poss takes sometime to adapt it.
How about the left screen (widget page) that only the upper screen touch work sometimes? It is fix by rebooting the phone but can't do it everytime right?!
k!DDa said:
can I somehow disable the notification that a system update is available? I don't want to upgrade after reading this but the notification sticks and cannot be swiped away.
Click to expand...
Click to collapse
you can freeze that system app using titanium backup or similar. I do not recommend uninstalling it fully though.
I have termporary slow downs. It seems like there is a memory leak, either in android 10 or oxygen 10.3.0.
Anyone else has the same?
1. Wide Gamut - cool - looks good.
2. Arnova Gcam beta works perfectly.
3. Takes around 5 sec for me.
4. Agree
5. Shouldn't use digital zoom in the first place.
6. Never tested\cared.
7. Battery life does seem a bit worse, flashing custom kernel made it better.
My girlfriends S9+ is still on android 9, has issues with dark netflix videos, freezing in general occasionally, whatsapp broke once completely and had to reinstall a few times to make it work, took them over a year to fix the camera light glare, no working gcam.
Gcam looks same and sometimes better than S9+.
Non-English character are not displaying properly.
Basically Chinese, Japanese, Korean, Tamil and etc are not displaying properly. Anyone got a fix?
i hate oos 10 really , thank god i downgraded to 9
mamoo said:
i hate oos 10 really , thank god i downgraded to 9
Click to expand...
Click to collapse
Which method did you use? I don't care about losing data. Just want to keep unlocked bootloader and root the easy way, via TWRP if possible. I basked up my 9.0.9 system before going to 10.3.
Sent from my OnePlus6 using XDA Labs
vkass said:
1. Wide Gamut - cool - looks good.
2. Arnova Gcam beta works perfectly.
3. Takes around 5 sec for me.
4. Agree
5. Shouldn't use digital zoom in the first place.
6. Never tested\cared.
7. Battery life does seem a bit worse, flashing custom kernel made it better.
My girlfriends S9+ is still on android 9, has issues with dark netflix videos, freezing in general occasionally, whatsapp broke once completely and had to reinstall a few times to make it work, took them over a year to fix the camera light glare, no working gcam.
Gcam looks same and sometimes better than S9+.
Click to expand...
Click to collapse
1. Try out Wide Gamut and have a look at Reds. They burn your eyes, too damn saturated.
2. 1 Gcam works fine but if I want to access the Aux camera or MJL and Xtreme's both we can't.
3. Used to be 2secs in OOS9
5. Still having a option and then removing makes no sense.
7. There shouldn't be a need to flash a custom kernel when it was pretty damn goood on stock one.
Anyone here getting ghost touch issue and sometimes proximity sensor issue too?
I tried with different firmware as well as stock miui and custom...
Upto 12.0.7 I didn't face that issue ..
After 12.0.8... I think my phone evolved into android robot
Oh man, it is automatically working
rhudsonsamuel said:
Anyone here getting ghost touch issue and sometimes proximity sensor issue too?
I tried with different firmware as well as stock miui and custom...
Upto 12.0.7 I didn't face that issue ..
After 12.0.8... I think my phone evolved into android robot
Oh man, it is automatically working
Click to expand...
Click to collapse
I didn't have that problem.
btw you posted in the wrong place.
Huh?
Posted in X3 thread only!
I have faced that issue too, but my phone has been dropped already and has a broken screen in the bottom. I guess this could be the reason my scenario.
Not a single damage on display.
now trying with latest firmware with custom rom and up to this time I didn't face it..
proximity working well
I have also ghost issue for months. It start after 5 or 6 months. I saw a lot of threads on reddit, and some here for other POCO or X3 Pro.
My issue is that sometime, 1 or 2 times a day, the screen goes crazy. Touch appears on all the screen and the only solution is to lock and unlock the screen.
I tried to disable 3 touchs option, stays à 90Hhz, update rom... I even tried to RMA but my local official xiaomi affiliated can't reproduce the issue.
At last I tried to install ArrowOs but crazy ghost touch reappears after 2 days. Do you think we can find some kernel or "touch driver" that can help ? What for an "indonesian" rom ?
It's a Hardware Problem.
I'm still looking for a way to mitigate this issue.
I just have to shut down the screen and then it's ok. It could be a software solution to reset some memory or electric level somewhere.
I saw tens of reporting, it look like a common issue on POCO device
Try and install: Touch Improvement magisk module of Akira
I think it need time for it to work right (somehow), but I don't have any issues anymore, while my phone was flipping like...
You're welcome! ;-)