Hi There,
I have a vanilla Huawei P9 Lite and the android unlock (guessing the disk encryption password) has been lost.
Tried HISuite software to connect with USB but says the device is not supported.
Also tried the hard reset recovery (Power + Up Volume) on boot, but the recovery option via WiFi just soft boots the phone.
The phone may have some hardware issues, according to the previous owner.
I'd like to wipe the phone for resale or reuse. Any tips or hints would be much appreciated.
Thanks,
Rolleroo
Guys, why do you ask questions for P9 Lite (VNS) in P9 (EVA) forum?!
Different phones, different hardware, different firmwares, and different users - nobody will read your question and answer you here
Related
Hi, i bought a huawei ascend g7 some months ago. It was running android 4.4.4 with Emui 3.0 . I found the update for the beta lollipop and i installed it. After i found some really noisy bugs, and so i decided to reinstall the lollipop firmware, and when i did it , after the reboot,the phone cant run android. I cant turn on the device cause it is stuck on the huawei android logo. I can also run rescue mode, recovery mode and , pressing vol + and vol- with power button i can access the firmware update mode.
So I tried to put the lollipop firmware update.app file into a dload folder into my SD card, and tryed to install the firmware by pressing vol+, vol- and power button.
It installed the firmware, said that the install went succesfully but when it rebooted nothing changed and is still stuck on the start huawei android screen. I tryed Also with the firmware with android 4.4.4, in the same way, but it tells me that the install cant ne done.
I Also tried to do a factory reset from the recovery, but after reaching the 52% it tells me that formatting cant be zone.
I am totally confused and i dont really know what to do, i hope that Someone can help me.
I also hope that i wrote in thw right section, i apologize if i dont and i Also apologize if my english is not really good..
Welcome to XDA Nitrozz,
The Huawei Ascend G7 doesn't have much development as of right now, so support is quite limited.
However there is a thread where you can ask your question at:
HUAWEI Ascend G7
There are experts there that can help you with your problem.
Good Luck
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck
Hi,
I bought P9 Lite 2017 kown also as P8 Lite 2017 and did factory reset from the stock recovery.
Now I have problem with Factory reset protection. The problem is that I bought it from other person and I have lost the number from him. So I tried some tutorials I have found online but nothing functioning.
So now I am able to turn on phone until Verify account page...maybe I can reinstall firmware but I am not sure which version. Its form Austria and unlocked, and if I want to install custom recovery I have to go in Developer settings and enable USB debugin and OEM unlock but I cant do it now.
So any opinion is appreciated. Thanks
lesa84 said:
Hi,
I bought P9 Lite 2017 kown also as P8 Lite 2017 and did factory reset from the stock recovery.
Now I have problem with Factory reset protection. The problem is that I bought it from other person and I have lost the number from him. So I tried some tutorials I have found online but nothing functioning.
So now I am able to turn on phone until Verify account page...maybe I can reinstall firmware but I am not sure which version. Its form Austria and unlocked, and if I want to install custom recovery I have to go in Developer settings and enable USB debugin and OEM unlock but I cant do it now.
So any opinion is appreciated. Thanks
Click to expand...
Click to collapse
Hi, that is interesting. If you want to fix it without oem.. Maybe impossible but if not, then boot into erecovery (connect to your computer then vol up+ power) After this you can disconnect, hopefully it will fix your phone.
Hello,
I recently bought an Huawei P40 lite (CDY-NX9A) and unfortunately tried to install google apps. While trying to downgrade the phone, somehow the the file got corrupted and the phone got stuck on reboot. I received the error "Data partition corrupted. Format the partition to continue" and I made a factory reset to the phone.
Now the phone opens as an Honor phone, does not accept any update via Hisuite, and the android version seems as 7.0.
Can some one help me?
My base software version was : CDY-LGRP2-OVS 10.1.0.202
that sounds really weird, do you manage to post a photo or screenshot of the issue?
My phone looks like this when I try to upgrade it. Is there a way to change this into EMUI? Also when I restart the phone I see the opening screen as HONOR not HUAWEI.
I believe somehow I deleted the entire phone, but it got restored to factory version but with the software in the attachments.
I tried to format and use the dload method with a flashdisk but it says it's not compatible with my phone. (JNY-L21 version).
The situation is very similar to the below thread I guess, but mine was vice versa. My Huawei phone is an Honor phone now.
Honor 9X : Softbrick... How to restore?? HELP!
Hello guys! I need your help to solve a difficult problem. In August I bought the Honor 9X STK-LX1 (431) from China. The device came with Android 9, firmware 9.1.0.334 and security April.The device booted every time with the Honor logo screen and...
forum.xda-developers.com
Did you try getting an actual Huawei firmware for it ? Looks to me you flashed a Honor rom on it.
install the ROM with an otg cable, and check this post is very complete.
Googlefier - Install GMS on Huawei/Honor
Wecome to Googlefier, After a successful tool for LG G2 and LG G3 owners (AutoRec), but after a long pause, here is something new and I hope useful Googlefier is a simple tool, designed to help you install GMS on your Huawei/Honor device...
forum.xda-developers.com
i got also Data partition corrupted.
but lukyly found way out: Vol+ and Power -> boot menu eRecovery -> Update mode -> eRecovery mode -> Update and recover system !!! here it asked wifi password and installed factory software back
in another video there was used from same "Data partition corrupted" screen option Low-level format and next screen is Factory reset and it proceeded install.
I have here Huawei Mediapad t3 7" (bg2-w09) that refuses to boot (stuck on logo screen, no looping).
Tried usual methods to access recovery in attempt to wipe/reset - cant enter recovery or download mode using hardware buttons.
As far as i know tablet is stock, no CFW was attempted, as it came from a person who knows nothing about any of that.
It charges, it lights up, just wont boot and wont let me in to try to wipe/reset it.
Debug is probably off (as is default), so usb debugging might not even work (haventr tried yet...)
Ideas ?
It doesn't work, that's why i'm asking here why, and how to get in...
you sure it isnt a chinese tablet which is a ripoff?
It was bought new from legit shop (mobile network storefront).
Does anyone has a custom android 10, 11 or 12 for the Mediapad T3 BG2-W09?
soevel said:
Does anyone has a custom android 10, 11 or 12 for the Mediapad T3 BG2-W09?
Click to expand...
Click to collapse
Anyone that has a ROM to root the device?