Hi, i bought a huawei ascend g7 some months ago. It was running android 4.4.4 with Emui 3.0 . I found the update for the beta lollipop and i installed it. After i found some really noisy bugs, and so i decided to reinstall the lollipop firmware, and when i did it , after the reboot,the phone cant run android. I cant turn on the device cause it is stuck on the huawei android logo. I can also run rescue mode, recovery mode and , pressing vol + and vol- with power button i can access the firmware update mode.
So I tried to put the lollipop firmware update.app file into a dload folder into my SD card, and tryed to install the firmware by pressing vol+, vol- and power button.
It installed the firmware, said that the install went succesfully but when it rebooted nothing changed and is still stuck on the start huawei android screen. I tryed Also with the firmware with android 4.4.4, in the same way, but it tells me that the install cant ne done.
I Also tried to do a factory reset from the recovery, but after reaching the 52% it tells me that formatting cant be zone.
I am totally confused and i dont really know what to do, i hope that Someone can help me.
I also hope that i wrote in thw right section, i apologize if i dont and i Also apologize if my english is not really good..
Welcome to XDA Nitrozz,
The Huawei Ascend G7 doesn't have much development as of right now, so support is quite limited.
However there is a thread where you can ask your question at:
HUAWEI Ascend G7
There are experts there that can help you with your problem.
Good Luck
Related
hello,
Can someone plzzz help me ?..
my phone reboot was required, when he did that he never startet up at all.. i cant put the phone off,
i tried vol up, down & pow button, but its the same as i do only the pow butt.. start up text huawai ascend with red A
and nothing happends..
i was running B512 official firmware since yesterday and he worked fine
i hope i can use my phone again :'(
image is off p7 is from google images, but that window is same as i see
thnxxxxx if some want to send if he knows :#
srry for my english : ]
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck
Hi guys, i'm desperately writing this thread after asking for help in the Oppo Community forum without no luck.
I know that this is for R7 Plus but i hope that someone could help me with my beloved R7s.
Months ago i've succefully installed the Project Spectrum ROM and it worked fine until few weeks ago when i noticed a random system slow down, maybe after an automatic app update.
I tryed to uninstall few apps and reboot the phone several times but with no luck.
So i decided to wipe it and reinstall the Color OS following the walkthrough but something went wrong and now my OPPO R7s is in a strange bootloop without recovery and fastboot.
The strange things are these:
- if I press the power button all I can see is the OPPO Logo and the loading dots in slow-mo
- if i connect it directly to a Windows PC it is recognized as a generic "Android" terminal.
- if i connect it to a Windows PC pressing and holding POWER + VOLUME DOWN + VOLUME UP it's recognized as a QHSUSB_BULK
I'm not a noob, neither an engineer, but i've a bit of familiarity with computers and similar things so i've tried to follow this guide:
http://community.oppo.com/en/forum.php?mod=viewthread&tid=48654
Downloading this service repair rom : https://drive.google.com/file/d/0BybDE_sPI3b5cmgtU05fbXNobVU/view (from this related discussion : http://forum.xda-developers.com/r7-plus/help/r7s-service-romqpst-unbrick-t3493377)
Following the guide, when i try to execute MSM8x39Downloadtool.exe selecting the phone model (i've three choices xx080_32G, xx081_32G, xx082_32G - and i don't know which one is the correct one) the phone is not recognized as COM CONNECTED in none of the ports. If I also do the verification, clicking on the top right button, it shows FAILED on system.img file.
Can that be the problem?
I'm stuck guys and i don't know what to do.
Any help will be better then a christmas present
Thanks in advance!!
A.
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
kishd said:
Download this rom and place it in the internal sd and flash to downgrade from spectrum
https://s3.amazonaws.com/public.opp...d_ColorOS/Specified_ColorOS_R7sf_full_009.zip
Click to expand...
Click to collapse
Thanks kishd i'll give this a try!
The only thing i'm bit worried about is how to flash from the internal sd without recovery mode and fastboot...
I'll keep you updated!:good:
any news?did you manage to fix?
hello guys
i have a problem with my oppo RS7
it has a hard bricked and stucked on booting and booting..... I only have a MacBook Pro and not windows
is anyone over there that knows exactly how to unbrick it using a Mac ?!
hi guys i tryied to intsal twrp recovery to mine huawei p9 lite and i used srk tool but when its supposed to start the twrp tool i got stock on your device has been unlocked and cant be trusted now i cannot rebbot mine phone i tryed almost every possible way to turn off but it automaticli turn on nd go to this point when it gets stuck help me please its maybe bcs my phone its bricked?
I don't remember p9 lite 2017 having twrp.
Anyway, your phone is officially f**cked!
The only way to unbrick it is using the dload method. Use google
hi all,
sorry for posting matepad 10.4 Bah3-W09 here, since theres no Matepad 10.4 forum ;-( this is the closest.
need help, im looking for Dload firmware for Matepad 10.4 BAH3-W09 . 10.1.151 and up
i currently stuch at 10.1.118 , where my usb-c to pc is not working and cannot do the e-recovery.
i cannot find anywhere else for dload firmware of BAH3-W09 .
I managed to upgrade to 220 and then Harmony OS.
I had the same frustrating issue as you (i.e. stuck on 118)
First change your region to mainland China, then restart tablet in recovery mode.
(turn off tablet, then turn on tablet while holding both volume buttons and power button)
From there, there is an option for online recovery, select it, then connect to your wifi and it'll start the process. This would upgrade your tablet to 220.
To upgrade it to Harmony OS 2.0, you will need to install the My Huawei app.