I have here Huawei Mediapad t3 7" (bg2-w09) that refuses to boot (stuck on logo screen, no looping).
Tried usual methods to access recovery in attempt to wipe/reset - cant enter recovery or download mode using hardware buttons.
As far as i know tablet is stock, no CFW was attempted, as it came from a person who knows nothing about any of that.
It charges, it lights up, just wont boot and wont let me in to try to wipe/reset it.
Debug is probably off (as is default), so usb debugging might not even work (haventr tried yet...)
Ideas ?
It doesn't work, that's why i'm asking here why, and how to get in...
you sure it isnt a chinese tablet which is a ripoff?
It was bought new from legit shop (mobile network storefront).
Does anyone has a custom android 10, 11 or 12 for the Mediapad T3 BG2-W09?
soevel said:
Does anyone has a custom android 10, 11 or 12 for the Mediapad T3 BG2-W09?
Click to expand...
Click to collapse
Anyone that has a ROM to root the device?
Related
Hello!
I have a problem with my Huawei Ascend P6, which wont boot, I've tried to access the recovery mode, but it doesn't work too. I would be really grateful, if you could point me in the right direction. It had the original ROM.
Extra information: I noticed the problem one morning, after I had left my phone tethered to my laptop (USB), both batteries were empty by then. After recharging it and turning it on, the phone started bootlooping.
tldr; Huawei P6 stuck in bootloop, original ROM, recovery mode wont start.
Thank you!
Please Review TUTORIAL : The correct way to install the new KitKat International B510 ROM
Post #49 has download links.
You might also wish to review Guide:Install KitKat International B510 ROM to B506/B507 firmwares
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck
I've been trying to root my phone for the last few days, everything just seems to be going badly.
I was finally able to unlock the bootloader, and i wasn't able to flash TWRP
after trying to get it to work and faffing around in recovery. I some how have got my phone in an endless loop. But not just an endless loop, but after the phone logo comes up, my phone's screen goes all glitchy and crazy with loads of colour. I can go into fastboot mode all ok, but now i can't access recovery mode anymore it's the same as normal mode.
I have no idea what's going on
i can't flash anything, when i do i get the message USB Transferring ... USB Transmission OK
Hi !
This looks like a soft brick but can you tell us more about your device ( model , software ) ?
Thank you
It's a BLU Vivo 6. it runs android marshmallow
AHappyLittleFishy said:
It's a BLU Vivo 6. it runs android marshmallow
Click to expand...
Click to collapse
Hi !
Some devices just can`t be unlocked without a prover support from the manufacturer
You can search for more on Google and wait for development , your case is far from unique
I see that you have alredy posted same issue here
https://forum.xda-developers.com/an...oot-device-t3546400/post70765622#post70765622
Thread closed
URGENT!!!! I did everything well except that I used the wrong img boot compared to my model, suddenly everything worked well but my one plus 8 pro no longer has the wifi working. so i will want a quick fix, if anyone can help me i would like to go back and have everything as before, new as factory.
I tried to install a stock one plus 8 pro global rom but the problem is that having wanted to unroot my smartphone I had to do a bad manipulation and my phone is in an infernal reboot loop. In the meantime, I manage to reach the bios with the recovery mode, the fastboot etc ... but the smartphone no longer has the usb debugging activated. I need to find a solution
hi all,
sorry for posting matepad 10.4 Bah3-W09 here, since theres no Matepad 10.4 forum ;-( this is the closest.
need help, im looking for Dload firmware for Matepad 10.4 BAH3-W09 . 10.1.151 and up
i currently stuch at 10.1.118 , where my usb-c to pc is not working and cannot do the e-recovery.
i cannot find anywhere else for dload firmware of BAH3-W09 .
I managed to upgrade to 220 and then Harmony OS.
I had the same frustrating issue as you (i.e. stuck on 118)
First change your region to mainland China, then restart tablet in recovery mode.
(turn off tablet, then turn on tablet while holding both volume buttons and power button)
From there, there is an option for online recovery, select it, then connect to your wifi and it'll start the process. This would upgrade your tablet to 220.
To upgrade it to Harmony OS 2.0, you will need to install the My Huawei app.