Database Info

need help with boost mobile samsung prevail

my phone get a blue screen cant get past it. the factory reset do not fix it anyway to rebuild the rom in my phone? the photo below it the blue screen i get.

If you can get it to download mode this will work
hroark13 said:
I created and ED13 rooted Odin recovery for those who have a phone that wont boot
THIS WILL WIPE ALL YOUR DATA
1. Download and unzip the file.
2. Install the Samsung USB drivers
3. Put phone in Download Mode by holding Vol down, Camera Button, and Power button until the Yellow Downloading message appears
4. Plug phone into USB port
4. Open Odin, you should see a yellow box with a com number
5 Select SPHM820.ops file and the ED13_SPHM820_ROOTED_PDA.tar in the appropriate Boxes
6 Click Start
If you have a really screwed up phone you can flash all three tar files and everyting will back to ED13
DOWNLOAD
megaupload.com/?d=5NPEJT9I
Click to expand...
Click to collapse

double post sorry

[Q] I have very big problem i need help

Hello,
I have tried many many system in my tablet and there is nothing working on with me i need someone who can help me to get the tablet back to default system i have tried cyanogenmod all version my tablet is p6200 and i tried everything now its not working anymore , i need some steps to get it back guys

if you want to go stock rom use Odin and download stock rom for you're country from http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=0&os=1&type=3#firmware

when i connect the usb in laptop its shown
USB Device Not Recolonize what shall i do to get the tablet to default and i have tried many things like i root the tablet and i try manyyyyyy roms so please can you tell me what to do exactly i download the kies program in my laptop what i have to do else ?

Not kies but use Odin and put you're tablet in download mode (power + vol down)

explain please give me the link of odin because i dont know it and when i press in power and volume up its shown
Warning
A custom OS can cause critical problems in tablet and installed applications. if you want to download a custom OS, press the voume up key.
otherwise, press the volume down key to cancel
Volume up : Continue
Volume down: Cancel ( restart tablet )

i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?

NightZeus said:
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
Click to expand...
Click to collapse
What To Do:
- Make sure Kies is Closed
- Disconnect the Tab from your PC
- Restart your Tab in Download Mode (Power Off Tab then Hold Volume - & Power Button)
- Open Odin , do not change any checkbox items
- Click the PDA button and find the Stock ROM .md5 file and select it (DO NOT HIT START YET)
- Plug in your Tab to the PC at which point the first "ID:COM" box should turn yellow and the Message windows should read "Added"
- Now, Hit Start
- When Completed the "ID:COM" Box should turn Green and right above it it should say "Pass"
The tablet should reboot,
- Disconnect the Tab from your PC

How can i go to download mode if i press on power and volume - its turn to recovery mode how can i go to download mode now

I find how to go to download mode
i open the odin and put the file on PDA and i saw its became yellow and added fine and then i hit start
its not sucess i got faild
what can i do now

try to find a tar.md5 package with a .pit file specifically for your device..,
alternately try flashing a stock Honeycomb ROM.. and booting into recovery and factory reset.
Most importantly research and read, If you can get into Download mode you're 90%+ will be OK

Get ClockworkMod recovery from here
http://forum.xda-developers.com/showthread.php?t=2112667
Use odin to flash it
boot to recovery
wipe system and cache
use odin to install your stock rom again
boot

[Completed] Samsung Galaxy SM-J100H - Can I fix this?

Hello,
My friend gave me a Samsung Galaxy SM-J100H because it wouldn't go past the Samsung Logo so I tried to root it. I used Odin and everything seemed to be going well until it restarted. When it restarted it said there was a problem with the USB connection. A window appeared with 3 different device drivers and the first two checked with a green tick and the 3rd the Samsung one gave me a red cross. I quickly tried to reinstall the USB driver but to no avail.
Now, I can't get into the Power+Home+Volume Up menu, all I can get is the Power+Home+Volume Down to work which brings up Press Volume Up to Continue. When I do that, even without the USB plugged in it just says Downloading.... Do not turn off target!! I left this overnight in case it somehow cached the root but to no avail.
Have I bricked it totally? Is there any way I can recover this? Is there a program that will wipe everything completely so I can start from Scratch? I refuse to believe that I can't solve a software issue with software. Is there something in the hardware I can do that would wipe everything like using a Jumper to clear the CMOS and BIOS for a PC, is there anything like that I could do? I know there would be any jumpers but maybe connecting certain connections it could effectively wipe it?
Even when I try to start again with Odin I can't since it will just go straight to Downloading.... Do not turn off target!! as soon as I press Volume Up.
Is there ANYTHING I can do?

Hi there and welcome to assist,
If you can enter in download mode using combo Power+Home+Volume Down then you can flash stock firmware. Search with google for this firmware and flash thru Odin.
Flashing instructions:
 Extract (unzip) the firmware file
 Download Odin v3.11.1
 Extract Odin ZIP file
 Open Odin v3.11.1
 Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
 Connect phone and wait until you get a blue sign in Odin
 Add the firmware file to AP / PDA
 Make sure re-partition is NOT ticked
 Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
You'll have to create an account to post in the main forums if you have any other questions.
Good luck

[HELP!!] Hardbrick after installing TWRP

Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...

You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.

Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6

1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)

mlrinoc said:
You can download Samsung Smart Switch and choose the emergency software recovery option. You'll loose everything on the phone but it sounds
as if you're already there.
It will ask for your phone serial and exact model no., then it will download the latest release and install.
Usually will work from the screen your on, but if a prob., boot into download mode.
Click to expand...
Click to collapse
Already tried that, like i said.. after downloading firmware it doesn't recognize my phone.

force70 said:
What device model do you have?
I assume its a 955F or FD?
Please dont tell me you have a U version.
sent from my Note FE, S8 plus, S7 edge or S6
Click to expand...
Click to collapse
i have the SM-G955F

Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
This - you probably have the newer AQG5 bootloader, which TWRP doesn't support yet.
So follow the instructions above, flash back to the previous bootloader, the you'll be able to flash TWRP ok.

Ceas4r said:
Hi guys,
So today i tried to install TWRP on my Galaxy S8+ with odin
after reboot it asked for somekind of reset so i did but TWRP wasnt installed.
I tried it again but before it rebooted i checked if TWRP got installed and still no TWRP
so i flashed it again without booting in to the phone.
Phone reboots.. well actually NOT.
its not booting up and keeps showing me the Samsung Galaxy S8+ text with powered by Android below.
So now i tried to flash the stock firmware again but odin keeps saying FAIL (DeviceInfo).
i only can get into download mode, recovery mode buttons doesnt work.
also tried it with Smartswitch & Kies but after downloading the firmware it wont recognize my phone.
Please someone help? i really dont know what to do anymore...
Click to expand...
Click to collapse
I had the same issue once before. What the fail device info. I think I fixed it by using the most recent update (I think). And messing around with csc files. All this was done half assed in desperation. Then went back to the unlocked firmware and stopped messing with it. Yes Smart switch didn't do crap. Use updato.com to obtain your firmwares

Poukhovitch said:
1. Download earlier firmware AQF7
2. Hold power, volume down and bixby button for download mode
3. Open Odin on your PC
4. Add the AQF7 BL and only this
5. Hit start and straight after this hold the 3 buttons in again power, volume down and bixby (this should fail at first and bring you straight back into download mode)
6. Now back on Odin spam the start button this time (this should flash the BL and have you sorted again)
Click to expand...
Click to collapse
Just got home and tried this! and OMG dude this actually worked! thanks!!! damn im glad my phone works again! thanks thanks thanks!! cant say it enough!!

My guide to fix the issue
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-flash-fail-fixed-solutions-t3650073

Bootloop, can't enter Recovery mode

So my phone (S6, SM-G920F) crashed recently (completly out of the blue, I was opening a YouTube-Link I've sent myself via the PC) and I can only access the Download Mode, but not the Recovery mode.
What I've tried (In order):
-Flash any ROM (DTM, DBT, VIA [Different Carriers for Germany, I dont know if mines branded]), only the DBT (Universal) ROM even flashed, others just failed in Odin3, phone still doesn't work
-Install TWRP
-Use SmartSwitch (After some failed ROM-Installations, it showed the following Message on the screen of my phone:
Spoiler
"An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
, Smart Switch didn't even work. I've installed Samsung USB-Drivers first, then installed Smart Switch. If I try to use the Emergency Recover Function, Smart Switch just freezes up entirely
Does someone here know how I can fix my device?

Someone? D:

Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
Even this method doesn't fix your device, then you need to replace your motherboard.

Thank you so so much, it worked like a charm,
Your tutorial was my last chance, and by accident i found this thread who gave me the magic solution (sorry for my bad english, it is not my native language)
Cheers !

Thanks for providing the above detailed instructions forumber2. Apologies for chipping in on the thread, but i had almost exactly the same issues at the iamflee but with one key difference - my wife had dropped the phone down the toilet first! She retrieved the phone immediately powered off, sim card out etc. and left it in a bag of rice for a week to dry out. It wouldn't turn back on at all. I tried all combinations of buttons and nothing, until I plugged it into my laptop and found I could get it into Download mode (but not recovery or to boot).
I tried lots of different ROM's/ TWRP/ bootloaders etc. but no joy, and then came across your answer above.
I followed it to the letter and Odin completed successfully, however the phone did not reboot at the end, it simply turned off, and will not turn back on. I can get it into Download mode but that is all.
Please can someone confirm what I think I already know, that the phone is goosed and I need to move on and stop spending hours trying to get it to work again! Or is there one last glimmer of hope with something else that I can try.
Thanks,
Matt

I am aware this does not contribute to the problem, but may give context.
Currently, I am stuck with an Samsung Galaxy S6 SM-G920F, which I am told 'randomly restarted' and since then was stuck on the Samsung boot screen. After the battery finally reached zero, it became stuck on the battery charging screen.
I have been able to force the phone to restart using either (Power + Vol Down + Home OR Power + Vol Down), but I am still greeted being stuck on the Samsung boot screen. Furthermore, I cannot boot into recovery mode (P + Vol Up + Home), but I can boot into download mode. However, Samsung Kies 2.6 is left on 'Connecting' in perpetuity without giving an error of any kind. I have installed the drivers provided and Windows detects the phone as a 'Gadget Serial'.
So, to clarify:
+ can boot into download mode
+Windows can detect the phone
- cannot boot into recovery mode
- stuck in boot loop
- Samsung Kies stuck on 'connecting'; hence emergency recovery is out the question
- Odin cannot detect the phone in download mode
I would conclude this SM-G920F motherboard has failed, or partially at least

same issue
safesploit said:
I am aware this does not contribute to the problem, but may give context.
Currently, I am stuck with an Samsung Galaxy S6 SM-G920F, which I am told 'randomly restarted' and since then was stuck on the Samsung boot screen. After the battery finally reached zero, it became stuck on the battery charging screen.
I have been able to force the phone to restart using either (Power + Vol Down + Home OR Power + Vol Down), but I am still greeted being stuck on the Samsung boot screen. Furthermore, I cannot boot into recovery mode (P + Vol Up + Home), but I can boot into download mode. However, Samsung Kies 2.6 is left on 'Connecting' in perpetuity without giving an error of any kind. I have installed the drivers provided and Windows detects the phone as a 'Gadget Serial'.
So, to clarify:
+ can boot into download mode
+Windows can detect the phone
- cannot boot into recovery mode
- stuck in boot loop
- Samsung Kies stuck on 'connecting'; hence emergency recovery is out the question
- Odin cannot detect the phone in download mode
I would conclude this SM-G920F motherboard has failed, or partially at least
Click to expand...
Click to collapse
I am having the same issue with the same terminal, did you manage to solve it?

safesploit said:
I would conclude this SM-G920F motherboard has failed, or partially at least
Click to expand...
Click to collapse
either that or the charge port
paublouska said:
I am having the same issue with the same terminal, did you manage to solve it?
Click to expand...
Click to collapse
was your phone submerged in water at all?

I have the same issue as the OP. J700F (J7-2015) stuck in boot loop.
+Charges
+Turns on but stucks on boot logo
+Can enter Download mode
+does show up in ODIN
-Cannot access recovery mode
-Cannot turn the phone on obv.
-Has FRP lock but I have the phone passcode and email (no email password duh)
Now I downloaded the correct firmware for my region (KSA; do I need to use XEF?) and connect my phone in download mode, select the files. now when I press start, it fails in ODIN and shows "Custom binary(boot) not allowed due to FRP" (I may have used wrong wordings but it seems it cannot install firmware due to FRP lock)
Now what am I looking at ?