my phone get a blue screen cant get past it. the factory reset do not fix it anyway to rebuild the rom in my phone? the photo below it the blue screen i get.
If you can get it to download mode this will work
hroark13 said:
I created and ED13 rooted Odin recovery for those who have a phone that wont boot
THIS WILL WIPE ALL YOUR DATA
1. Download and unzip the file.
2. Install the Samsung USB drivers
3. Put phone in Download Mode by holding Vol down, Camera Button, and Power button until the Yellow Downloading message appears
4. Plug phone into USB port
4. Open Odin, you should see a yellow box with a com number
5 Select SPHM820.ops file and the ED13_SPHM820_ROOTED_PDA.tar in the appropriate Boxes
6 Click Start
If you have a really screwed up phone you can flash all three tar files and everyting will back to ED13
DOWNLOAD
megaupload.com/?d=5NPEJT9I
Click to expand...
Click to collapse
double post sorry
Related
Phone is stuck on att white world phone logo and is not going to download mode by holding the volume buttons and power, and or volume down and power.
When i hold the buttons and plug it in and all i see is a damn battery that goes on then off. Odin is open and does seem change.
All this just to get some bloatware and fix a gps.
Try the third option which is the only one works for me:
1. Take battery out and put back
2. Hold both Vol buttons. Don't touch the power button.
3. Plug in the USB cable to your PC. Don't touch the power button.
Your phone should boot into download mode right away. Remember, don't ever touch the power button.
WOW
wow dude perfect you saved me from freaking out! hah SOLVED thanks a million bad power button!
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
foxbat121 said:
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
Click to expand...
Click to collapse
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Just do a search for captivate jig
kang0saur said:
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Click to expand...
Click to collapse
Look in my sig.
Entering Download Mode but odin not working
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
evedavis58 said:
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Here is the procedure you need to follow:
1. Install the proper driver so that ODIN can see your phone when plugged in. Drivers are listed in the thread where you download ODIN.
2. Open ODIN with phone not attached. Select the firmware file (*.rar) you want to flash in PDA field.
3. Power off the phone and enter into download mode and connect the phone to PC.
4. Wait for the driver to install and your phone recognized. It will show up in one of the boxes in ODIN.
5. Once your phone is recognized, press Start button on ODIN to start the flash process.
6. Leave the PC and phone alone for a few minutes and pray (that your phone didn't get bricked in the process).
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Cog does not use Odin. Just get clockwork recovery and install it. Then boot into recovery and flash cog. Go to stickies in dev section, there are guides.
I try to select cognition.rar but says it needs a .tar file. What do I do to make it work?
Cog does not install with Odin unless dg added that. You need to unrar it. Download winrar and extract it, see what's inside.
Sent from my Captivate using XDA App
This guide lays it out pretty well. http://forum.xda-developers.com/showthread.php?t=884364
Personally, here's what I use to do. Go to the Dev section and search for ClockworkMod Recovery. Search that thread for the update.zip. I'm sure it's in there. Put the update.zip on your internal storage, ie, when you plug phone into pc with USB the thing you mount and store file on, not an added SD card.
Boot into stock recovery. Choose reinstall packages, it reboots. Choose reinstall packages again, now your in Clockwork. Choose > install zip from sdcard > choose zip file > then navigate to Cognition (assuming you've put that on your internal storage also) and select it. It flashes, choose reboot. Bam! You're running Cognition.
evedavis58 said:
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
Click to expand...
Click to collapse
evedavis58 said:
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Click to expand...
Click to collapse
You two need to read more before risking your phone. I sense you soon to have two very expensive bricks on your hand.
I have Galaxy ace
I wanted to switch to 2.3.3, so I downloaded the software ROM manager did flash. He asked me to pick and chose just Pelephone Pelephone, he wrote that he succeeded. After Flash went to Backup (backup), I clicked, boom turned off. I gave him a minute or two That's it.
BY THE WAY, you know what this Emergency MOD? Computer can recognize it is about this situation.
help?plzzzzzzzzzzzzzz
it seems that you tried to show some intelligence in flashing rom
who said you to flash with rom manager when the site clearly stated that you have to use odin to flash rom.
the only thing now you can try is putting you phone in download mode and flash with odin and follow the flash guide directions below-
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS, Boot, Phone, PDA, CSC (leave EFS and One Package empty)
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar.md5
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take 5-10 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
Hey dude
tnx for hlp,but he dont get into download mode and recovery mod.
he Not Responding for nothing.
when i try to turn it on,recovery mod.download mod, he wont boot.
sorry to say but i think you bricked or semi-bricked your ace...
i got more then less same problem..
just have my galaxy ace GT-S5830
needed restart.. try turn on again... only thing he did was buzzing and samsung came in the screen lightning on and off... but wasnt able to continue to normal android menu...
i try a restart now
in small yellow i see downloading.. hope it works..
else i bring it back to the shop.. phone is just 1!! day old
guddu2011 said:
sorry to say but i think you bricked or semi-bricked your ace...
Click to expand...
Click to collapse
How to solve bricked SGA?
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
alstonleo said:
try this.. remove ur phone battery memory card and sim card .
Reinsert battery but do not turn on phone.
Start odin
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
then connect your phone via usb and keep the volume down + power + home button pressed
this shud put ur phone in download mode
then click on Start button in ODIN and ur phone shud restart
Click to expand...
Click to collapse
Facing the same problem, the critical point the mobile does not respond to power up (either turning on, recovery mode or even download mode), any help please??? I got this mobile less than month now
Samsung Galaxy Ace Wont Boot!!
when i press the power button of my galaxy ace, baring in mind the battery has charge, the empty battery indicator comes up and then the phones turns off straight away. i have tried flashing different versions of android hoping it was a buggy firmware but no luck. this also happens when plugging the phone into an ac power supply. any help?????????
If you cannot access the download mode or the recovery mode then your phone is bricked. All what you can do is go to the service center and pull up a nice story about how it happened while you were sleeping. If you are lucky enough, you will get a replacement.
Btw WRONG THREAD. THERE IS A SEPARATE ONE FOR THE ACE.
TeamCooper Developer
TheMyth Developer
www.teamcooper.net
Galaxy ACE only displaying the word "Android"
Same problem here, only I use Ubuntu 12 and was wondering if there is a way of re-flashing using download mode and Ubunu?
I had attempted to install MIUI Rom, since then I have been stuck in a boot loop. I tried to use GTG's ultimate_unbrick solution and when I send the phone into download mode all I get is a white screen and Odin keeps toggling between COM4 and nothing in the COM:ID section; meanwhile, the message section toggles between added and removed. I hit start when the COM:ID section shows COM4 and the box above COM4 shows FAIL!.
HELP!!!
robert.hortonii said:
I had attempted to install MIUI Rom, since then I have been stuck in a boot loop. I tried to use GTG's ultimate_unbrick solution and when I send the phone into download mode all I get is a white screen and Odin keeps toggling between COM4 and nothing in the COM:ID section; meanwhile, the message section toggles between added and removed. I hit start when the COM:ID section shows COM4 and the box above COM4 shows FAIL!.
HELP!!!
Click to expand...
Click to collapse
Sound like you didn't quite get the odin part correctly.
Miui installation is quite specific and requires a pull battery with installation.
you can try it again.
miui specific:
1. Place MIUI-Infuse.zip on internal SD card
2. Reboot into CWM
3. Wipe data/factory reset
4. Wipe Dalvik Cache
5. Flash MIUI-Infuse.zip
If your phone doesn't boot:
1. Pull battery and put back in
2. Hold volume up, volume down, and power button
3. let go of power button as soon as you see samsung text
4. wait til blue cwm shows
5. Flash MIUI-Infuse-1.*.*.zip again
6. Enjoy!!
If not, you may have to odin or heimdall.
try a different usb port or usb cord or pc
read this if you havent
http://forum.xda-developers.com/show...php?p=21230579
qkster said:
Sound like you didn't quite get the odin part correctly.
Miui installation is quite specific and requires a pull battery with installation.
you can try it again.
miui specific:
1. Place MIUI-Infuse.zip on internal SD card
2. Reboot into CWM
3. Wipe data/factory reset
4. Wipe Dalvik Cache
5. Flash MIUI-Infuse.zip
If your phone doesn't boot:
1. Pull battery and put back in
2. Hold volume up, volume down, and power button
3. let go of power button as soon as you see samsung text
4. wait til blue cwm shows
5. Flash MIUI-Infuse-1.*.*.zip again
6. Enjoy!!
If not, you may have to odin or heimdall.
try a different usb port or usb cord or pc
read this if you havent
http://forum.xda-developers.com/show...php?p=21230579
Click to expand...
Click to collapse
The phone won't boot. All I get is a white screen when I try to turn it on. Not even the Samsung logo. Just all white.
robert.hortonii said:
The phone won't boot. All I get is a white screen when I try to turn it on. Not even the Samsung logo. Just all white.
Click to expand...
Click to collapse
Try this.
Power off.
Pull battery. Battery in
Power on holding three buttons. When you see the Samsung screen and the buttons light up, let go of the power while holding the volumes.
Will this get you a recovery screen?
qkster said:
Try this.
Power off.
Pull battery. Battery in
Power on holding three buttons. When you see the Samsung screen and the buttons light up, let go of the power while holding the volumes.
Will this get you a recovery screen?
Click to expand...
Click to collapse
No all I get is a flashing white screen. I never get the Samsung text. Sorry I forgot to mention that the white screen was flashing.
robert.hortonii said:
No all I get is a flashing white screen. I never get the Samsung text.
Click to expand...
Click to collapse
Robert,
make sure your battery is charged.
I'm not sure if the flashing screen is still download mode. the only 2 i know is android shoveling and triangle and phone !
If you turn off and put it in download mode (or the flashing screen)
and connect it to your pc, your pc should recognize the phone if you had the correct drivers.
If odin is not working,
try heimdall.
adam outler also has an unbrickable mod somewhere in the development section.
it suppose to restore the phone in any condition.
look for that if nothing works.
make sure you do the correct download mode.
Hello,
I have tried many many system in my tablet and there is nothing working on with me i need someone who can help me to get the tablet back to default system i have tried cyanogenmod all version my tablet is p6200 and i tried everything now its not working anymore , i need some steps to get it back guys
if you want to go stock rom use Odin and download stock rom for you're country from http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=0&os=1&type=3#firmware
when i connect the usb in laptop its shown
USB Device Not Recolonize what shall i do to get the tablet to default and i have tried many things like i root the tablet and i try manyyyyyy roms so please can you tell me what to do exactly i download the kies program in my laptop what i have to do else ?
Not kies but use Odin and put you're tablet in download mode (power + vol down)
explain please give me the link of odin because i dont know it and when i press in power and volume up its shown
Warning
A custom OS can cause critical problems in tablet and installed applications. if you want to download a custom OS, press the voume up key.
otherwise, press the volume down key to cancel
Volume up : Continue
Volume down: Cancel ( restart tablet )
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
NightZeus said:
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
Click to expand...
Click to collapse
What To Do:
- Make sure Kies is Closed
- Disconnect the Tab from your PC
- Restart your Tab in Download Mode (Power Off Tab then Hold Volume - & Power Button)
- Open Odin , do not change any checkbox items
- Click the PDA button and find the Stock ROM .md5 file and select it (DO NOT HIT START YET)
- Plug in your Tab to the PC at which point the first "ID:COM" box should turn yellow and the Message windows should read "Added"
- Now, Hit Start
- When Completed the "ID:COM" Box should turn Green and right above it it should say "Pass"
The tablet should reboot,
- Disconnect the Tab from your PC
How can i go to download mode if i press on power and volume - its turn to recovery mode how can i go to download mode now
I find how to go to download mode
i open the odin and put the file on PDA and i saw its became yellow and added fine and then i hit start
its not sucess i got faild
what can i do now
try to find a tar.md5 package with a .pit file specifically for your device..,
alternately try flashing a stock Honeycomb ROM.. and booting into recovery and factory reset.
Most importantly research and read, If you can get into Download mode you're 90%+ will be OK
Get ClockworkMod recovery from here
http://forum.xda-developers.com/showthread.php?t=2112667
Use odin to flash it
boot to recovery
wipe system and cache
use odin to install your stock rom again
boot
Hello,
My friend gave me a Samsung Galaxy SM-J100H because it wouldn't go past the Samsung Logo so I tried to root it. I used Odin and everything seemed to be going well until it restarted. When it restarted it said there was a problem with the USB connection. A window appeared with 3 different device drivers and the first two checked with a green tick and the 3rd the Samsung one gave me a red cross. I quickly tried to reinstall the USB driver but to no avail.
Now, I can't get into the Power+Home+Volume Up menu, all I can get is the Power+Home+Volume Down to work which brings up Press Volume Up to Continue. When I do that, even without the USB plugged in it just says Downloading.... Do not turn off target!! I left this overnight in case it somehow cached the root but to no avail.
Have I bricked it totally? Is there any way I can recover this? Is there a program that will wipe everything completely so I can start from Scratch? I refuse to believe that I can't solve a software issue with software. Is there something in the hardware I can do that would wipe everything like using a Jumper to clear the CMOS and BIOS for a PC, is there anything like that I could do? I know there would be any jumpers but maybe connecting certain connections it could effectively wipe it?
Even when I try to start again with Odin I can't since it will just go straight to Downloading.... Do not turn off target!! as soon as I press Volume Up.
Is there ANYTHING I can do?
Hi there and welcome to assist,
If you can enter in download mode using combo Power+Home+Volume Down then you can flash stock firmware. Search with google for this firmware and flash thru Odin.
Flashing instructions:
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
You'll have to create an account to post in the main forums if you have any other questions.
Good luck