Database Info

Firmware MIUI 8.8.30 for XIAOMI Mi5

Yesterday XIAOMI Mi5 has get a new update.
About TWRP aborts the update, because firmware MIUI 8.8.30 is required as a minimum requirement.
However, I find these not to download - does anyone have a link?
Regards & Thanks

Same here, does anyone can provide the download link ? Thank you

same here and the last update that worked has some bugs.
Apps crashing, battery drains etc.
Was hoping the new update would have fixed these issues but alas
I cannot get TWRP to flash giving the same error about MIUI 8.8.30

cabs77 said:
Yesterday XIAOMI Mi5 has get a new update.
About TWRP aborts the update, because firmware MIUI 8.8.30 is required as a minimum requirement.
However, I find these not to download - does anyone have a link?
Regards & Thanks
Click to expand...
Click to collapse
beerchow said:
Same here, does anyone can provide the download link ? Thank you
Click to expand...
Click to collapse
Blaster3K said:
same here and the last update that worked has some bugs.
Apps crashing, battery drains etc.
Was hoping the new update would have fixed these issues but alas
I cannot get TWRP to flash giving the same error about MIUI 8.8.30
Click to expand...
Click to collapse
This is to all of you, you can't apply stock OTA updates on rooted devices or devices that have TWRP installed. Stock OTA updates require an unmodified system partition(meaning no root, no Xposed, no root mods of any kind).
OTA updates also require stock recovery, not TWRP.
You can all try flashing any stock firmware for your device then wait for the update notification then try the update process.
To those of you that have TWRP installed, this is a good example of why it is so important to create a nandroid backup of your stock ROM before you modify anything on the device. If you had that nandroid backup, you could restore the backup, then flash a copy of your stock recovery, then unroot the device, then wait for the update notification, then you'd be able to apply the current update. Then after applying the update, root the device again and flash TWRP again, then create a new nandroid backup of the updated stock ROM and delete the older backup from before the update.
Sent from my LGL84VL using Tapatalk

I am running Lineage OS 15.1 when it applies the nightly update I get this error.
So what you are saying is they updated to MIUI 10 which as what I can see updates to MIUI 8.8.30 which includes new code
that TWRP and Lineage cannot install over. Also there is this Xiaomi's anti rollback that is installed as well so I am guessing
either live with the last Lineage OS update or install stock MIUI and call it day.

Blaster3K said:
I am running Lineage OS 15.1 when it applies the nightly update I get this error.
So what you are saying is they updated to MIUI 10 which as what I can see updates to MIUI 8.8.30 which includes new code
that TWRP and Lineage cannot install over. Also there is this Xiaomi's anti rollback that is installed as well so I am guessing
either live with the last Lineage OS update or install stock MIUI and call it day.
Click to expand...
Click to collapse
Oh, you mean a nightly update of LOS?
Maybe the MIUI update contained a bootloader update and the new builds of LOS were built to work with the new bootloader?
Sent from my LGL84VL using Tapatalk

Interesting I encountered the same problem. Lineage Cannont update because 8.8.30 stock ROM Miui is required.

Simply download latest available miui firmware. Via TWRP install it and then immediately install latest LineageOS.

Here is the link to the new MIUI
http://en.miui.com/thread-3709942-1-1.html
Sent from my LGL84VL using Tapatalk

Here all firmware files, select gemini for Mi5 https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/

Lost twrp after miui 10 update

Hi, i have a problem with twrp. Lately i bought a Redmi Note 6 Pro, i waited the normal 15 days to unlock the bootloader, then I unlocked it and i flashed twrp, root, etc... The problem is that after the first update i made (MIUI 10 stable update) i lost root (which i think it's normal) and the twrp. TWRP recovery got overwritten by the default xiaomi recovery. How can i fix this? Because it's impossible to install twrp back after every update, i would have to format it evey time because of the locked internal storage! I'll leave some info below.
Ah and btw i tryed again yesterday with a new update and it happened again, so it wasn't just a one-time thing.
Phone: Redmi Note 6 Pro 4+64
MIUI version: MIUI Global 10.2 | Stable | 10.2.2.0(OEKMIXM) last version, i updated yesterday
TWRP used: unofficial twrp, the official one isn't out yet for my device. If it's needed i can send the iso or something

Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Sent from my Redmi Note 6 Pro using Tapatalk

shakil002 said:
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Click to expand...
Click to collapse
Does it work for you or you lose it as well after update? Thank you anyway

Will this twrp work for latest version??

I lost root and TWRP after updating too.

I heard that everytime you update your phone, it replaces the TWRP and disable root. That's one of the reasons I will wait more before root my phone.

Guys i'm working hard to find a solution. If i find it i'll tell you. Please do the same if you find something

I think you'll need to do everything again (install TWRP and root).

GuilhermeXDA said:
I think you'll need to do everything again (install TWRP and root).
Click to expand...
Click to collapse
The bad part isn't re-installing twrp or root. It's that every time you do that you MUST format the data because insthead you wouldn't have access to internal storage from twrp, and that makes it impossible to flash anything

Bregaa said:
The bad part isn't re-installing twrp or root. It's that every time you do that you MUST format the data because insthead you wouldn't have access to internal storage from twrp, and that makes it impossible to flash anything
Click to expand...
Click to collapse
That's indeed the worst part. Better to wait for a recovery that can decrypt internal storage permanently.
Sent from my Redmi Note 6 Pro using Tapatalk

After flashing stock miui you have to flash disable vm cause the stock miui will replace the recovery with the stock one!

You all should learn about these topics more or stop experimenting with half knowledge.
When you are installing/ flashing any full MIUI ROM, you are also flashing the stock recovery that comes with MIUI. So it's natural that TWRP will get replaced.
So after flashing a new ROM, always flash TWRP and Lazyflasher too.
Always install/ flash a new ROM via TWRP and not through the System Updater app.
Hope this helped.

Flash TWRP then flash this : https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

for euopean country you should use EU rom, weekly OTA update and flashed by TWRP automatically,
only Magisk must be flashed again for root,
maybe for chinese developer rom it is the same procedure ?

Lost root
:
shakil002 said:
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Sent from my Redmi Note 6 Pro using Tapatalk
Click to expand...
Click to collapse
The same thing happened to me with my S2 redmi device, I lost the recovery and root access, can someone help me with root in Miui 10.2?

Where can we find the MIUI updates to flash through TWRP?

GuilhermeXDA said:
Where can we find the MIUI updates to flash through TWRP?
Click to expand...
Click to collapse
http://en.miui.com/download-356.html

Draky50110 said:
http://en.miui.com/download-356.html
Click to expand...
Click to collapse
Thank you!

Trying my 1st custom ROM

Any recommendation on which ROM should i use for my 1st custom ROM? Is the pixel experience any good? i mean is there any major issues about this ROM? Is it also safe to flash it on my current MIUI version whihc is MIUI 10.2.2.0 PDGMIXM its the global version. I already unlocked my bootloader and currently searching for tutorials on how to install TWRP and which one should I install in this device. Many thanks in advance if anyone responds on this post.

genesismarkus420 said:
Any recommendation on which ROM should i use for my 1st custom ROM? Is the pixel experience any good? i mean is there any major issues about this ROM? Is it also safe to flash it on my current MIUI version whihc is MIUI 10.2.2.0 PDGMIXM its the global version. I already unlocked my bootloader and currently searching for tutorials on how to install TWRP and which one should I install in this device. Many thanks in advance if anyone responds on this post.
Click to expand...
Click to collapse
It depends on how many costumizations you prefer. LineageOS and Pixel Experience do not have many extra features, while e.g. RR, Arrow and Havoc do. I experienced very few bugs in PE and LOS, but I haven't tried other custom roms. LOS has very clear installation instructions, which are also applicable to most other custom roms: https://wiki.lineageos.org/devices/polaris/install
We have an official TWRP version; you can find the instructions and download link on https://twrp.me.

Thanks
I just want to try a new look on my phone. Ill install those roms soon, is it ok to back up this current miui im using if i dont like the rom i installed right?

Yes, but some users (including me) reported failures of restoring full rom backups. So make sure you also use some alternative backup (e.g. the Migrate app) and save your backup files on an external device.

Use a full backup with TWRP. It worked for me every time. However there is a bug with phone protection (unlock code or fingerprint) - and you have to delete it manually in TWRP file manager.
But everything works fine.

danterape said:
Use a full backup with TWRP. It worked for me every time. However there is a bug with phone protection (unlock code or fingerprint) - and you have to delete it manually in TWRP file manager.
But everything works fine.
Click to expand...
Click to collapse
Pretty much easier is removing any PIN or fingerprint authorization before doing the backup.

enzo_cz said:
Pretty much easier is removing any PIN or fingerprint authorization before doing the backup.
Click to expand...
Click to collapse
so by doing what you said after flashing a new rom and it will be smooth sailing right?

genesismarkus420 said:
so by doing what you said after flashing a new rom and it will be smooth sailing right?
Click to expand...
Click to collapse
Not sure I get you. My apologies. Removing any PIN, fingerprint authorization before doing twrp backup is inevitable unless you want to modify your backup file the way somebody above described.

enzo_cz said:
Pretty much easier is removing any PIN or fingerprint authorization before doing the backup.
Click to expand...
Click to collapse
enzo_cz said:
Not sure I get you. My apologies. Removing any PIN, fingerprint authorization before doing twrp backup is inevitable unless you want to modify your backup file the way somebody above described.
Click to expand...
Click to collapse
btw, does unlocking the bootloader affects my phone from getting OTA? im still using the stock rom now MIUI 10.2.2.0 PDGMIXM.

genesismarkus420 said:
btw, does unlocking the bootloader affects my phone from getting OTA? im still using the stock rom now MIUI 10.2.2.0 PDGMIXM.
Click to expand...
Click to collapse
You can still receive OTA updates on the unlocked bootloader as long as you are using official Mi rom and you do not have twrp installed. TWRP may break OTA updates. At best case an OTA will just replace your twrp with stock recovery. Root also should not affect OTA updates. So no problem getting ota even if bootloader is unlocked as far as I am aware of

genesismarkus420 said:
Any recommendation on which ROM should i use for my 1st custom ROM? Is the pixel experience any good? i mean is there any major issues about this ROM? Is it also safe to flash it on my current MIUI version whihc is MIUI 10.2.2.0 PDGMIXM its the global version. I already unlocked my bootloader and currently searching for tutorials on how to install TWRP and which one should I install in this device. Many thanks in advance if anyone responds on this post.
Click to expand...
Click to collapse
I'm in the same case , I had a mi8 and installed a pixel experience and my brother took it and since he use s and until now everything works well he even knows that I changed the rom and that's not miui Lol
Do I bought I used mix 2s and I think I'm gonna install the lineage is because I want security patches and updates on the rom

Anyone have a link to 10.3.3.0 global stable recovery ROM (PEEMIXM)?

I found the 10.3.2.0 (global stable, PEEMIXM) recovery ROM on GetDroidTips and updated with it last night, but I have been getting the notification for 10.3.3.0 for about a month now. Does anyone know where to get a recovery ROM for 10.3.3.0 for the Mi Mix 3? For clarification my Mix 3 is rooted hence why I can't just use the OTA. Or is there a way to use the OTA to update that I am unaware of? I tried to flash one through TWRP when I was still on 10.2.2.0 and it instantly failed.
Thanks!

Here's a link to everything you would probably ever want or need. https://mifirm.net/model/perseus.ttt

PWn3R said:
Here's a link to everything you would probably ever want or need. https://mifirm.net/model/perseus.ttt
Click to expand...
Click to collapse
This is exactly what I needed thank you so much :good:

PWn3R said:
Here's a link to everything you would probably ever want or need. https://mifirm.net/model/perseus.ttt
Click to expand...
Click to collapse
To flash in TWRP should I be using the ZIP version or fastboot version?

The OTA zip. Fastboot is for using the Xiaomi MiFlash or fastboot tool from computers.

PWn3R said:
The OTA zip. Fastboot is for using the Xiaomi MiFlash or fastboot tool from computers.
Click to expand...
Click to collapse
Okay thanks!

Just an FYI - I am a Global Beta tester, and there were bugs in a number of the updates for a while that would mess up the vendor partition if you flashed it from TWRP instead of from the stock recovery, even with the full size OTA file. I haven't seen that now that they got done with the Global Beta and switched to Stable Beta Pilot Team, but wanted to provide fair warning, if you have that problem after flashing an OTA from TWRP, the only fix I found was to download the Fastboot version and re-flash with Mi Flash, but make sure not to relock your bootloader, ESPECIALLY if you have CN device like I do.

PWn3R said:
Just an FYI - I am a Global Beta tester, and there were bugs in a number of the updates for a while that would mess up the vendor partition if you flashed it from TWRP instead of from the stock recovery, even with the full size OTA file. I haven't seen that now that they got done with the Global Beta and switched to Stable Beta Pilot Team, but wanted to provide fair warning, if you have that problem after flashing an OTA from TWRP, the only fix I found was to download the Fastboot version and re-flash with Mi Flash, but make sure not to relock your bootloader, ESPECIALLY if you have CN device like I do.
Click to expand...
Click to collapse
Thanks for the heads up. I'm on global stable, is the issue just for global beta? Also if I wind up switching to global beta, which I was considering, is it worth doing a complete reflash with MiFlash for every update? Wouldn't be ideal but better than bootlooping

Global Beta isn't a thing anymore. I've never seen the corruption happen on stable, but someone did report it. If you were to install beta at this point you'd be getting 3+ month old software as Xiaomi killed global beta.
Sent from my Mi MIX 3 using Tapatalk

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!

nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!

Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??

nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??

There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool

jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11

But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me

jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done

What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.

jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11

walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.

[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64

Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?

Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.

Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.

Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash