Firmware MIUI 8.8.30 for XIAOMI Mi5 - General Questions and Answers

Yesterday XIAOMI Mi5 has get a new update.
About TWRP aborts the update, because firmware MIUI 8.8.30 is required as a minimum requirement.
However, I find these not to download - does anyone have a link?
Regards & Thanks

Same here, does anyone can provide the download link ? Thank you

same here and the last update that worked has some bugs.
Apps crashing, battery drains etc.
Was hoping the new update would have fixed these issues but alas
I cannot get TWRP to flash giving the same error about MIUI 8.8.30

cabs77 said:
Yesterday XIAOMI Mi5 has get a new update.
About TWRP aborts the update, because firmware MIUI 8.8.30 is required as a minimum requirement.
However, I find these not to download - does anyone have a link?
Regards & Thanks
Click to expand...
Click to collapse
beerchow said:
Same here, does anyone can provide the download link ? Thank you
Click to expand...
Click to collapse
Blaster3K said:
same here and the last update that worked has some bugs.
Apps crashing, battery drains etc.
Was hoping the new update would have fixed these issues but alas
I cannot get TWRP to flash giving the same error about MIUI 8.8.30
Click to expand...
Click to collapse
This is to all of you, you can't apply stock OTA updates on rooted devices or devices that have TWRP installed. Stock OTA updates require an unmodified system partition(meaning no root, no Xposed, no root mods of any kind).
OTA updates also require stock recovery, not TWRP.
You can all try flashing any stock firmware for your device then wait for the update notification then try the update process.
To those of you that have TWRP installed, this is a good example of why it is so important to create a nandroid backup of your stock ROM before you modify anything on the device. If you had that nandroid backup, you could restore the backup, then flash a copy of your stock recovery, then unroot the device, then wait for the update notification, then you'd be able to apply the current update. Then after applying the update, root the device again and flash TWRP again, then create a new nandroid backup of the updated stock ROM and delete the older backup from before the update.
Sent from my LGL84VL using Tapatalk

I am running Lineage OS 15.1 when it applies the nightly update I get this error.
So what you are saying is they updated to MIUI 10 which as what I can see updates to MIUI 8.8.30 which includes new code
that TWRP and Lineage cannot install over. Also there is this Xiaomi's anti rollback that is installed as well so I am guessing
either live with the last Lineage OS update or install stock MIUI and call it day.

Blaster3K said:
I am running Lineage OS 15.1 when it applies the nightly update I get this error.
So what you are saying is they updated to MIUI 10 which as what I can see updates to MIUI 8.8.30 which includes new code
that TWRP and Lineage cannot install over. Also there is this Xiaomi's anti rollback that is installed as well so I am guessing
either live with the last Lineage OS update or install stock MIUI and call it day.
Click to expand...
Click to collapse
Oh, you mean a nightly update of LOS?
Maybe the MIUI update contained a bootloader update and the new builds of LOS were built to work with the new bootloader?
Sent from my LGL84VL using Tapatalk

Interesting I encountered the same problem. Lineage Cannont update because 8.8.30 stock ROM Miui is required.

Simply download latest available miui firmware. Via TWRP install it and then immediately install latest LineageOS.

Here is the link to the new MIUI
http://en.miui.com/thread-3709942-1-1.html
Sent from my LGL84VL using Tapatalk

Here all firmware files, select gemini for Mi5 https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/

Related

Can we update CM Firmware without reinstalling OS

Hello,
Can we update CM Firmware without reinstalling OS?
I have recently install Nitrogen OS with the given firmware. But I have noticed there is a new firmware released with some bug fixes
Can I install the latest firmware without reinstalling the OS??
Jseven123 said:
Hello,
Can we update CM Firmware without reinstalling OS?
I have recently install Nitrogen OS with the given firmware. But I have noticed there is a new firmware released with some bug fixes
Can I install the latest firmware without reinstalling the OS??
Click to expand...
Click to collapse
If you want to switch to a completely different ROM, you will have to do the wipes in recovery then flash the new ROM. If you want to flash an update of the same ROM you have then you don't need the wipes, you can just flash the update without wiping, this is called "dirty flashing". Dirty flash usually only works when flashing an update of the same ROM that you have.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hello ,
I am talking about the cm14.1 latest firmware and not about the custom room updates. Is it possible to install without any issues
Thanks in advance
Jseven123 said:
Hello ,
I am talking about the cm14.1 latest firmware and not about the custom room updates. Is it possible to install without any issues
Thanks in advance
Click to expand...
Click to collapse
What do you mean the latest CM14.1 update?
NitrogenOS and CM 14.1 ARE BOTH custom ROMs, they are NOT firmwares. Some devices were manufactured and sold with CyanogenMod as the stock firmware but CM is still predominately a custom android operating system.
And, as I said, if the update is an update to the exact same ROM as what is already installed, then all you have to do is flash it without doing any kind of wipes(this can even be done when updating stock via OTA, it's actually recommended to not do the wipes when updating stock via OTA). For example, if you have CM13 and want to update to CM14, or if you have CM14 and want to update to CM14.1 or if you have CM14.1 but want to flash a newer CM14.1 update, understand yet?
BUT!!!!
If you have some other ROM(something other than a version CM) currently installed but want to update to CM instead of what you have then you would have to factory reset, wipe cache and dalvik cache before flashing.
Let's make this simple since you can't seem to make sense of what I'm telling you. Tell me what you currently have installed and what you want to update to.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hello,
I am currently using Nitrogen OS for Redmi note 3. I have flashed the firmware and installed the OS according to the procedures. I run nougat(7.1.2) on my Mob
Check this link : https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
Jseven123 said:
Hello,
I am currently using Nitrogen OS for Redmi note 3. I have flashed the firmware and installed the OS according to the procedures. I run nougat(7.1.2) on my Mob
Check this link : https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
Click to expand...
Click to collapse
You have nitrogen OS installed on your android and if you want to install update of nitrogen OS then no need of wiping.
If you want to change to different rom ( nitrogenOS to CM) then you need to first wiping/factory resetting or clearing dalvik and cache.
So, you are changing your rom then wipe/factory reset first and then flash CM. That what @Droidriven trying to say you.
Again you are confused. ROMs like Nitrogen runs on CM firmware ( or you can call it architecture). It's not the OS again, It regarding firmware. please someone help me on this I dont want my phone to get bootlooped or any other sort of issue. FYI : I don't want CM ROM/OS. I want Nitrogen itself but want to upgrade to the latest firmware. Please check the link i had provide before replying
Jseven123 said:
Again you are confused. ROMs like Nitrogen runs on CM firmware ( or you can call it architecture). It's not the OS again, It regarding firmware. please someone help me on this I dont want my phone to get bootlooped or any other sort of issue. FYI : I don't want CM ROM/OS. I want Nitrogen itself but want to upgrade to the latest firmware. Please check the link i had provide before replying
Click to expand...
Click to collapse
This is making sense now. You see, you are the one confused. You aren't asking the right question because you don't understand the difference.
You aren't looking for the "CM firmware", this does not even exist. This implies that the firmware was created by CM. It wasn't made by CM, it does not contain CM in it so it can't be called "CM FIRMWARE", it's a STOCK FIRMWARE that is COMPATIBLE with USING CM and other custom ROMs.
What you are looking for is the "stock firmware" that needs to be on your device BEFORE using CM13/14/14.1/AOSP Nougat ROMs.
The thread that you linked basically explains that if you want to use any kind of custom 7.0/7.1/7.1.1 Nougat ROMS then you need to flash this updated STOCK FIRMWARE in order for the device to be able to use those custom ROMs. It is not "CM FIRMWARE"
You're looking for the STOCK FIRMWARE that is compatible with CM and other nougat ROMs.
The thread that you linked explains what you need to know and how to do it, it says that you flash the updated firmware via TWRP and factory reset, wipe cache and dalvik when you flash it.
If you are looking for a newer update than the one in that thread then you'll have to find it in a TWRP flashable .zip. If there is not a TWRP flashable zip to apply the new update then the only way to flash the new update is to flash it via PC then root the device again, install TWRP again and then flash your NitrogenOS ROM again.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
thank for the prompt response! so can i flash the latest firmware with the OS installed?
Jseven123 said:
thank for the prompt response! so can i flash the latest firmware with the OS installed?
Click to expand...
Click to collapse
I just explained what you needed to do, did you read it? It is simple, are you even reading the thread that you linked? What you are asking is irrelevant, just do what it says to do in the steps below.
1) Boot to TWRP
2) Flash the updated firmware via TWRP
3) Factory reset, wipe cache and dalvik
4) Flash NitrogenOS
5)reboot, enjoy.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

[Newbie Question]TWRP gone after OTA update OSS 5.1.6

I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Have u not read anything in these forums, tutorials or anything?
There are like 50 threads on how to upgrade and about the new partitions for op6, it is even clear when u installed twrp too
dRakeNNNN said:
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Click to expand...
Click to collapse
Hi, just to clarify when you install an OTA on the oneplus 6 it uses the new partitioning system which is different so to remedy the situation just try reflashing TWRP enchilada installer using fastboot.
cschmid44 said:
Hi, just to clarify when you install an OTA on the oneplus 6 it uses the new partitioning system which is different so to remedy the situation just try reflashing TWRP enchilada installer using fastboot.
Click to expand...
Click to collapse
Previously, i've installed Beta(unofficial) version of TWRP, now i want to re-install TWRP with Official version , do i need to remove or do something firstly?
To fix it just download the official TWRP for oneplus 6 from the official team win recovery project page and then you put that on your phone, and flash using your currently installed TWRP then after that make sure you also install the root package as installing the new version of TWRP will modify the new boot image, Also a good time to mention that it will install in both slots (Seamless update slots) Treble slots if you will just to be aware.
cschmid44 said:
To fix it just download the official TWRP for oneplus 6 from the official team win recovery project page and then you put that on your phone, and flash using your currently installed TWRP then after that make sure you also install the root package as installing the new version of TWRP will modify the new boot image, Also a good time to mention that it will install in both slots (Seamless update slots) Treble slots if you will just to be aware.
Click to expand...
Click to collapse
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
dRakeNNNN said:
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
Click to expand...
Click to collapse
Just follow one of the many upgrade guides. Skip the part about upgrading to 5.1.6 but for the rest follow the steps exactly. No need to explain all this in yet another thread imo. You'll need a pc though.
that's would be great if twrp can be flashed and stays there without wiping as well as root.
Pleasssseeeeee read before creating a new thread
dRakeNNNN said:
I have an oneplus 6 with official OSS 5.1.5 and TWRP installed. But after OTA update my phone to OSS 5.1.6, i cannot boot to TWRP anymore. Is TWRP gone after OTA update? My OEM unlocking still unlocked.
Click to expand...
Click to collapse
Wait!
Don't install 5.1.6 ROM because OP has retired it. The last version availabe on OP site is the 5.1.5.
MuttleyMB said:
Wait!
Don't install 5.1.6 ROM because OP has retired it. The last version availabe on OP site is the 5.1.5.
Click to expand...
Click to collapse
I'm using 5.1.6, so far so good. I don't have any issue on 5.1.6. ?
Sent from my OnePlus6 using XDA Labs
dRakeNNNN said:
Thank you for your reply, but my problem is i cannot boot into TWRP after OTA upgrade my OSS from 5.1.5 to 5.1.6
Click to expand...
Click to collapse
You can't boot into twrp because it's not there anymore. The OTA created a completely stock version of the OS that you're now booted on. You need to reinstall twrp and magisk according to the posted guides. This is going to be the case with all OTAs. The stock updater looks for root, and when it's there, it installs a complete OS, not an incremental update.

2nd attempt to upgrade to 12.2.4.0 from 12.0.4.0 failed and resulting in storage wipe

Hi,
I would like to know if anybody encountered this. This is my second time encountering this issue. I was on 12.0.4 and received a notification to perform update to 12.4.0. After downloading and rebooting, my twrp launched and after a few seconds instead of flashing, it went to the main menu page. After that, the phone just goes to fastboot mode and refused to boot. My phone has been rooted with magisk. Much appreciated for experts inputs.
The only way for me to boot my phone is to do a clean flash using mi flash tool and fallback to the old version...
Thank you.
spicediablo said:
Hi,
I would like to know if anybody encountered this. This is my second time encountering this issue. I was on 12.0.4 and received a notification to perform update to 12.4.0. After downloading and rebooting, my twrp launched and after a few seconds instead of flashing, it went to the main menu page. After that, the phone just goes to fastboot mode and refused to boot. My phone has been rooted with magisk. Much appreciated for experts inputs.
The only way for me to boot my phone is to do a clean flash using mi flash tool and fallback to the old version...
Thank you.
Click to expand...
Click to collapse
V12.0.4.0.QJKMIXM is a android 10 stable rom and V12.2.4.0.RJKMIXM is a android 11 stable beta rom which has many bugs.
V12.2.4.0.RJKEUXM is a stable rom that you can flash with miflash(but EEA not global).
After successfully going to v12.2.4.0, now I am finding that my current TWRP 3.4.1b unable to decrypt the phone thus not able to root it. I guess I have to fall back to 12.0.4.0 to be safe... I was tempted to go to 12.2.4.0 due to android 11 but looks like it's too problematic now due to beta. I was actually wondering why beta was pushed to me.
NOSS8 said:
V12.0.4.0.QJKMIXM is a android 10 stable rom and V12.2.4.0.RJKMIXM is a android 11 stable beta rom which has many bugs.
V12.2.4.0.RJKEUXM is a stable rom that you can flash with miflash(but EEA not global).
Click to expand...
Click to collapse
"I was actually wondering why beta was pushed to me "
You are not the only one, many users have reported this problem to XDA and c.mi.com
Try xiaomi.eu_multi_HMK30Pro_V12.2.2.0.RJKCNXM_v12-11 better than stock and on android 11.
spicediablo said:
After successfully going to v12.2.4.0, now I am finding that my current TWRP 3.4.1b unable to decrypt the phone thus not able to root it. I guess I have to fall back to 12.0.4.0 to be safe... I was tempted to go to 12.2.4.0 due to android 11 but looks like it's too problematic now due to beta. I was actually wondering why beta was pushed to me.
Click to expand...
Click to collapse
Now it is a stable rom https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.2.4.0.RJKMIXM/
seems to be the same
Try flashing stock recovery before performing ota update. Flashing ota via twrp cause /storage inaccessible for me.
Thanks, so you updated with stock recovery without issues but are you able to flash twrp with the updated rom?
kopter36 said:
Try flashing stock recovery before performing ota update. Flashing ota via twrp cause /storage inaccessible for me.
Click to expand...
Click to collapse
NOSS8 said:
"I was actually wondering why beta was pushed to me "
You are not the only one, many users have reported this problem to XDA and c.mi.com
Try xiaomi.eu_multi_HMK30Pro_V12.2.2.0.RJKCNXM_v12-11 better than stock and on android 11.
Click to expand...
Click to collapse
Is that the most stable android 10 based on miui? I'm thinking about downgrading to many android 11 bugs on 12.2.4.0 global
Latin_lion_ said:
Is that the most stable android 10 based on miui? I'm thinking about downgrading to many android 11 bugs on 12.2.4.0 global
Click to expand...
Click to collapse
This is not a stock ROM and it is a android 11.
spicediablo said:
Thanks, so you updated with stock recovery without issues but are you able to flash twrp with the updated rom?
Click to expand...
Click to collapse
Yes i am able to successfully flashed twrp via fastboot afterward and directly proceed to root using magisk.
Everything works as usual, except, for me atleast, twrp now require pattern-type (3x3 dot) as password for decryption. Pin or character doesnt works.
Deleted.
To solve update problem you need to Rollback to stable stock rom, I used this:
Code:
lmi_global_images_V12.2.4.0.RJKMIXM_20201228.0000.00_11.0_global
extracted it.
then used mi flash from this toolkit:
Code:
mi-globe.com_Xiaomi_MiFlash_Pro_EN_5.3.1104.39.exe
sorry, but I cant provide links to downloads.
Moribus said:
To solve update problem you need to Rollback to stable stock rom, I used this:
Code:
lmi_global_images_V12.2.4.0.RJKMIXM_20201228.0000.00_11.0_global
extracted it.
then used mi flash from this toolkit:
Code:
mi-globe.com_Xiaomi_MiFlash_Pro_EN_5.3.1104.39.exe
sorry, but I cant provide links to downloads.
Click to expand...
Click to collapse
This is nothing new. With the bootloader unlock you can flash any version of stock rom with miflash.
kopter36 said:
Yes i am able to successfully flashed twrp via fastboot afterward and directly proceed to root using magisk.
Everything works as usual, except, for me atleast, twrp now require pattern-type (3x3 dot) as password for decryption. Pin or character doesnt works.
Click to expand...
Click to collapse
Successfully updated to 12.2.4.0. However, my nova launcher has been 'uninstalled' after this upgrade and I am unable to reinstall it with install fail error coming up. I am installing from apk. Anybody has this issue?

Question Updating ROM from Chinese (13.0.8) to EU rom

Hi everyone . Couple of weeks ago I received my 12S Ultra, and started with unlocking process. Phone is currently unlocked and I was looking for threads which show the process of updating it to latest EU rom. I've seen this https://forum.xda-developers.com/t/rom-miui-thor-xiaomi-eu-rom-for-xiaomi-12s-ultra.4481389/ thread and wanted to ask if this is up to date? I'd like to install MIUI 14 also if that is possible.
Another list of questions, would updates after flashing be working or would I need to manually update ROM as the releases come, and also are there any significant issues on MIUI 14 or should I go with MIUI 13?
Thanks in advance.
2 versions of rom, Weekly or stable. The weekly is a hybrid rom and for the moment the stable is installed with the TWRP.
Both receive updates via OTA.
NOSS8 said:
2 versions of rom, Weekly or stable. The weekly is a hybrid rom and for the moment the stable is installed with the TWRP.
Both receive updates via OTA.
Click to expand...
Click to collapse
Thanks for quick reply, okay so if I understood you correctly after flashing I can just update it directly on the phone when update comes via OTA. For the TWRP installation, so I can't just follow the tutorial and execute the first install script (which formats data) correct?
Just trying to wrap my head around this since I've flash global ROM before but without TWRP. Once more thanks for answering.
jarac2 said:
Thanks for quick reply, okay so if I understood you correctly after flashing I can just update it directly on the phone when update comes via OTA. For the TWRP installation, so I can't just follow the tutorial and execute the first install script (which formats data) correct?
Just trying to wrap my head around this since I've flash global ROM before but without TWRP. Once more thanks for answering.
Click to expand...
Click to collapse
Installing TWRP does not require data formatting.
But for the first installation of a Xiaomi EU rom it is advisable to format the data with TWRP or use the first install.bat script depending on the version of the rom.

Development OP9-LEMONADE-A13-ROM-WATCHDOGS-JUNE 25, 2023

I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE!!!
YOU HAVE BEEN WARNED!!!
Watch dogs is a ROM I created and it started with the OnePlus 9 Pro back in December. I have decided to bring it to the OnePlus 9, it's based on LineageOS & crDroid source & dependencies and I thank them for its use. SafetyNet and CTS passes whether your rooted or not. Modules not required. Most features are the same as crDroid but I have made some adjustments to bluetooth quality and some fonts that are not available there, plus Gapps are included.
Before you begin, if you don't have the latest platform tools installed on your windows machine. Download it here:
DO NOT FLASH GAPPS!!!! THEY ARE INCLUDED IN BUILD!!!!!
Flashing Instructions
First time installation (clean flash):
This update requires OOS 13.1 - 13.1.0.500(EX01) firmware
Backup your data
Download the ROM, and firmware flasher listed further down on this post and place all in your platform tools folder,
Extract all the contents in platform tools, Firmware flasher in folder.
You must flash firmware in bootloader.
Boot to recovery and factory reset then adb sideload
adb sideload WatchDogs-13.0-20230625-lemonade.zip
Reboot to system
reboot to recovery if you want root
adb sideload magisk.apk or adb sideload magisk.zip
Reboot to system
Update installation:
Updates can be sideloaded with custom recovery. Updates do not appear in system updater.
Sources:
ROM
Kernel
Downloads:
ROM
FIRMWARE FLASHER
Bugs?
Let me know.
Initial builds
WatchDogs-WITHGAPPS-13.0-20230312-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230312-lemonade.zip
If you require Google apps, flash the first one only!
If you do not want Google apps, flash the second one only!
You can't cross dirty flash a update which should be common sense. Example, you can't dirty flash the with gapps build then next update, dirty flash the no gapps one.
I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!
Telegram group please
lorilucille9 said:
I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!
Click to expand...
Click to collapse
That's weird. Did you try sideloading the firmware flasher first before the ROM? If you still have difficulties, I will post the dtbo, boot and vendor_boot files for you to flash to make it compatible. I don't have this phone. I have the OnePlus9 Pro so I can't test it. I'm sure it works or there would be other users saying the same thing.
I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with
lorilucille9 said:
I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with
Click to expand...
Click to collapse
Good deal, and no problem. Since I use crDroid sources, I figured that should work. I will still post the files necessary to flash recovery when I get a chance. Let me know if there are any bugs or issues with the ROM itself so I can work on it. Thank you!
I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.
incesu571 said:
I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.
Click to expand...
Click to collapse
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
thx bro
TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.
lorilucille9 said:
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.
Click to expand...
Click to collapse
correct, sorry, forgot to mention that as well. Thank you!! crDroid doesn't offer a with gapps build. You can use the no gapps build to flash your own gapps but I won't support force close issues with the ROM. Example, pixel setup wizard can't be used because it interfers with the default launcher. And yes, on updates, just sideload the with gapps build and your done, unless you want root, then you will have to reboot and sideload magisk because root will be gone on a update.
incesu571 said:
Telegram group please
Click to expand...
Click to collapse
There is one in my 9 pro thread. I will update when I can.
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
Convert your T-Mobile to EU as listed on another thread, then you can use the EU firmware. I will be posting a update soon with the boot, vendor_boot and dtbo. If you don't want to do that, I will post them later to flash recovery on your phone. Keep in mind that different variants act different, so you may have bugs on T-Mobile, it wasn't tested.
screenshots?
pubmastervnt said:
screenshots?
Click to expand...
Click to collapse
Not by me, maybe someone else who is running it
MARCH UPDATES: 03/24:
WatchDogs-WITHGAPPS-13.0-20230324-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230324-lemonade.zip
Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
You can use my custom recovery, files added in OP. You still need latest stock A13.
fastboot flash --slot all boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
You cant install this (or any rom but base 11) on tmobile 2117 without BL unlock key. Pretty sure its not possible.
You can only convert to base global 11\OOS11 on 2117 for root, then in ui updater doesnt work OTA or manually. You can get to 13 stock only, because you need to be stock to ota, where you need a key to unlock bootloader again (conversion would bring you back to 11).
*The rooting situation with this phone sucks. I think Jaguar is the only one that will work because it is base 11.

Categories

Resources