Hi, i have a problem with twrp. Lately i bought a Redmi Note 6 Pro, i waited the normal 15 days to unlock the bootloader, then I unlocked it and i flashed twrp, root, etc... The problem is that after the first update i made (MIUI 10 stable update) i lost root (which i think it's normal) and the twrp. TWRP recovery got overwritten by the default xiaomi recovery. How can i fix this? Because it's impossible to install twrp back after every update, i would have to format it evey time because of the locked internal storage! I'll leave some info below.
Ah and btw i tryed again yesterday with a new update and it happened again, so it wasn't just a one-time thing.
Phone: Redmi Note 6 Pro 4+64
MIUI version: MIUI Global 10.2 | Stable | 10.2.2.0(OEKMIXM) last version, i updated yesterday
TWRP used: unofficial twrp, the official one isn't out yet for my device. If it's needed i can send the iso or something
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Sent from my Redmi Note 6 Pro using Tapatalk
shakil002 said:
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Click to expand...
Click to collapse
Does it work for you or you lose it as well after update? Thank you anyway
Will this twrp work for latest version??
I lost root and TWRP after updating too.
I heard that everytime you update your phone, it replaces the TWRP and disable root. That's one of the reasons I will wait more before root my phone.
Guys i'm working hard to find a solution. If i find it i'll tell you. Please do the same if you find something
I think you'll need to do everything again (install TWRP and root).
GuilhermeXDA said:
I think you'll need to do everything again (install TWRP and root).
Click to expand...
Click to collapse
The bad part isn't re-installing twrp or root. It's that every time you do that you MUST format the data because insthead you wouldn't have access to internal storage from twrp, and that makes it impossible to flash anything
Bregaa said:
The bad part isn't re-installing twrp or root. It's that every time you do that you MUST format the data because insthead you wouldn't have access to internal storage from twrp, and that makes it impossible to flash anything
Click to expand...
Click to collapse
That's indeed the worst part. Better to wait for a recovery that can decrypt internal storage permanently.
Sent from my Redmi Note 6 Pro using Tapatalk
After flashing stock miui you have to flash disable vm cause the stock miui will replace the recovery with the stock one!
You all should learn about these topics more or stop experimenting with half knowledge.
When you are installing/ flashing any full MIUI ROM, you are also flashing the stock recovery that comes with MIUI. So it's natural that TWRP will get replaced.
So after flashing a new ROM, always flash TWRP and Lazyflasher too.
Always install/ flash a new ROM via TWRP and not through the System Updater app.
Hope this helped.
Flash TWRP then flash this : https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
for euopean country you should use EU rom, weekly OTA update and flashed by TWRP automatically,
only Magisk must be flashed again for root,
maybe for chinese developer rom it is the same procedure ?
Lost root
:
shakil002 said:
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Sent from my Redmi Note 6 Pro using Tapatalk
Click to expand...
Click to collapse
The same thing happened to me with my S2 redmi device, I lost the recovery and root access, can someone help me with root in Miui 10.2?
Where can we find the MIUI updates to flash through TWRP?
GuilhermeXDA said:
Where can we find the MIUI updates to flash through TWRP?
Click to expand...
Click to collapse
http://en.miui.com/download-356.html
Draky50110 said:
http://en.miui.com/download-356.html
Click to expand...
Click to collapse
Thank you!
Related
This work is not mine. Just sharing.
Most of the users of whyred has updated to miui10 pie update 9.3.28 but finding data encrypted on recovery boot.and are unable to decrypt it.
Try this recovery file in the link and the data partition works fine without any password problem.
TWRP
https://github.com/GuaiYiHu/android...2.3.0-whyred/TWRP-20190330-3.2.3.0-whyred.img
Orangefox TWRP
https://sourceforge.net/projects/or...OrangeFox-R9.0-2-whyred-MIUI-Pie.zip/download
(This version not compatible with oreo so use it for miui pie only)
https://youtu.be/1WnxULKjgdE
For xposed on miui 10 see here:
https://forum.xda-developers.com/re...ment/modified-xposed-miui10-oreo-8-1-t3913160
gursewak.10 said:
This work is not mine. Just sharing.
Most of the users of whyred has updated to miui10 pie update 9.3.28 but finding data encrypted on recovery boot.and are unable to decrypt it.
Try this recovery file in the link and the data partition works fine without any password problem.
https://github.com/GuaiYiHu/android...2.3.0-whyred/TWRP-20190330-3.2.3.0-whyred.img
https://youtu.be/1WnxULKjgdE
For xposed on miui 10 see here:
https://forum.xda-developers.com/re...ment/modified-xposed-miui10-oreo-8-1-t3913160
Click to expand...
Click to collapse
So from what I've read, if you flash the rom first, then update your recovery you should be good?
Sent from my Redmi Note 5 using Tapatalk
OrangeFox
gsmyth said:
So from what I've read, if you flash the rom first, then update your recovery you should be good?
Sent from my Redmi Note 5 using Tapatalk
Click to expand...
Click to collapse
Yeah sure
gursewak.10 said:
This work is not mine. Just sharing.
Most of the users of whyred has updated to miui10 pie update 9.3.28 but finding data encrypted on recovery boot.and are unable to decrypt it.
Try this recovery file in the link and the data partition works fine without any password problem.
https://github.com/GuaiYiHu/android...2.3.0-whyred/TWRP-20190330-3.2.3.0-whyred.img
For xposed on miui 10 see here:
https://forum.xda-developers.com/re...ment/modified-xposed-miui10-oreo-8-1-t3913160
Click to expand...
Click to collapse
does this version support f2fs? Thanks in advance.
sushuguru said:
does this version support f2fs? Thanks in advance.
Click to expand...
Click to collapse
Yes it supports.
Remember to backup internal storage before changing file system.
Thanks bro it works like charm
Working good but after the restart the twrp is gone, stock recovery gets replaced
I tried to flash then no-verity-opt-encrypt-6.0.zip but getting error not installing
Please tell me what to do now, twrp is replacing by stock recovery
Update - It is resolved now, I flashed magisk over it and twrp is not replaced anymore
gursewak.10 said:
This work is not mine. Just sharing.
Most of the users of whyred has updated to miui10 pie update 9.3.28 but finding data encrypted on recovery boot.and are unable to decrypt it.
Try this recovery file in the link and the data partition works fine without any password problem.
TWRP
https://github.com/GuaiYiHu/android...2.3.0-whyred/TWRP-20190330-3.2.3.0-whyred.img
Orangefox TWRP
https://sourceforge.net/projects/or...OrangeFox-R9.0-2-whyred-MIUI-Pie.zip/download
(This version not compatible with oreo so use it for miui pie only)
https://youtu.be/1WnxULKjgdE
For xposed on miui 10 see here:
https://forum.xda-developers.com/re...ment/modified-xposed-miui10-oreo-8-1-t3913160
Click to expand...
Click to collapse
Thank you for sharing.
Can I install it without magisk?Will it be gone after the device restarted without installing magisk?
Just info : Link updated https://github.com/GuaiYiHu/android...2.3.0-whyred/TWRP-20190330-3.2.3.0-whyred.img
it's a recovery so magisk is your choice if you want it or not.
ashish1989 said:
Working good but after the restart the twrp is gone, stock recovery gets replaced
I tried to flash then no-verity-opt-encrypt-6.0.zip but getting error not installing
Please tell me what to do now, twrp is replacing by stock recovery
Update - It is resolved now, I flashed magisk over it and twrp is not replaced anymore
Click to expand...
Click to collapse
I had this problem before. when you flash twrp, try to reboot to twrp again. then the twrp won't be flashed by stock recovery.
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Not sure if that will work, but locally upgrading from h2OS to OOS worked on my old op6 when I had it.
If it does not work;
Backup your files first then you need to unlock your bootloader.
Then boot twrp via command prompt. Once booted into twrp. Wipe data and do a factory reset there. Flash twrp installer then reboot into recovery.
Flash OB7, twrp installer and magisk then reboot to recovery again and flash ob7, twrp installer and magisk then reboot to system
I'm using .74
Not sure what the problem is/are.
Regards
Dark Fear said:
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Click to expand...
Click to collapse
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
theocdguy said:
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
Click to expand...
Click to collapse
so whats the right way to do it
Dark Fear said:
so whats the right way to do it
Click to expand...
Click to collapse
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
theocdguy said:
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
Click to expand...
Click to collapse
i'm already on oldest pie.. whats the difference of his method with the one i mentioned?
Since kernel releases are yet to be published " a total duck move by xiaomi ?" I wanted to keep on using the stock ROM without changing anything but miui is too cringy for me to live with it, so I need to put the ol'rooting hat once again
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
I had a previous xiaomi phone (mido) but tbh I never even thought of using the miui and switched to RR once I unlocked the bootloader ?
You can get ota with magisk but updating will rewrite boot and recovery so you'll need to re-root.
mr-mero said:
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
Click to expand...
Click to collapse
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
pnin said:
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
Click to expand...
Click to collapse
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Yes I know I would still have to flash twrp and magisk again after it
I'll test it on my old phone first , hope it can work as a reference for one last time of it's miserable life
mr-mero said:
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Click to expand...
Click to collapse
I thought the same, but then I'm not keen on moving to v12.0.4.0 right now, so I didn't budge. Let us know how it goes. :good:
.
How to install magisk on stock miui global after bootloader unlock?
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
pnin said:
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
Click to expand...
Click to collapse
yes i know that. using since 2015 TWRp. but i heard there is system wipe issue on poco twrp. if you installed it confirm
No issue here, just flashed it through TWRP as usual.
.
what about installing magisk from orangefox? What are the steps?
abubin said:
what about installing magisk from orangefox? What are the steps?
Click to expand...
Click to collapse
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
yan2xme said:
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
Click to expand...
Click to collapse
thanks! done it and it is working now.
Hi,
I would like to know if anybody encountered this. This is my second time encountering this issue. I was on 12.0.4 and received a notification to perform update to 12.4.0. After downloading and rebooting, my twrp launched and after a few seconds instead of flashing, it went to the main menu page. After that, the phone just goes to fastboot mode and refused to boot. My phone has been rooted with magisk. Much appreciated for experts inputs.
The only way for me to boot my phone is to do a clean flash using mi flash tool and fallback to the old version...
Thank you.
spicediablo said:
Hi,
I would like to know if anybody encountered this. This is my second time encountering this issue. I was on 12.0.4 and received a notification to perform update to 12.4.0. After downloading and rebooting, my twrp launched and after a few seconds instead of flashing, it went to the main menu page. After that, the phone just goes to fastboot mode and refused to boot. My phone has been rooted with magisk. Much appreciated for experts inputs.
The only way for me to boot my phone is to do a clean flash using mi flash tool and fallback to the old version...
Thank you.
Click to expand...
Click to collapse
V12.0.4.0.QJKMIXM is a android 10 stable rom and V12.2.4.0.RJKMIXM is a android 11 stable beta rom which has many bugs.
V12.2.4.0.RJKEUXM is a stable rom that you can flash with miflash(but EEA not global).
After successfully going to v12.2.4.0, now I am finding that my current TWRP 3.4.1b unable to decrypt the phone thus not able to root it. I guess I have to fall back to 12.0.4.0 to be safe... I was tempted to go to 12.2.4.0 due to android 11 but looks like it's too problematic now due to beta. I was actually wondering why beta was pushed to me.
NOSS8 said:
V12.0.4.0.QJKMIXM is a android 10 stable rom and V12.2.4.0.RJKMIXM is a android 11 stable beta rom which has many bugs.
V12.2.4.0.RJKEUXM is a stable rom that you can flash with miflash(but EEA not global).
Click to expand...
Click to collapse
"I was actually wondering why beta was pushed to me "
You are not the only one, many users have reported this problem to XDA and c.mi.com
Try xiaomi.eu_multi_HMK30Pro_V12.2.2.0.RJKCNXM_v12-11 better than stock and on android 11.
spicediablo said:
After successfully going to v12.2.4.0, now I am finding that my current TWRP 3.4.1b unable to decrypt the phone thus not able to root it. I guess I have to fall back to 12.0.4.0 to be safe... I was tempted to go to 12.2.4.0 due to android 11 but looks like it's too problematic now due to beta. I was actually wondering why beta was pushed to me.
Click to expand...
Click to collapse
Now it is a stable rom https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.2.4.0.RJKMIXM/
seems to be the same
Try flashing stock recovery before performing ota update. Flashing ota via twrp cause /storage inaccessible for me.
Thanks, so you updated with stock recovery without issues but are you able to flash twrp with the updated rom?
kopter36 said:
Try flashing stock recovery before performing ota update. Flashing ota via twrp cause /storage inaccessible for me.
Click to expand...
Click to collapse
NOSS8 said:
"I was actually wondering why beta was pushed to me "
You are not the only one, many users have reported this problem to XDA and c.mi.com
Try xiaomi.eu_multi_HMK30Pro_V12.2.2.0.RJKCNXM_v12-11 better than stock and on android 11.
Click to expand...
Click to collapse
Is that the most stable android 10 based on miui? I'm thinking about downgrading to many android 11 bugs on 12.2.4.0 global
Latin_lion_ said:
Is that the most stable android 10 based on miui? I'm thinking about downgrading to many android 11 bugs on 12.2.4.0 global
Click to expand...
Click to collapse
This is not a stock ROM and it is a android 11.
spicediablo said:
Thanks, so you updated with stock recovery without issues but are you able to flash twrp with the updated rom?
Click to expand...
Click to collapse
Yes i am able to successfully flashed twrp via fastboot afterward and directly proceed to root using magisk.
Everything works as usual, except, for me atleast, twrp now require pattern-type (3x3 dot) as password for decryption. Pin or character doesnt works.
Deleted.
To solve update problem you need to Rollback to stable stock rom, I used this:
Code:
lmi_global_images_V12.2.4.0.RJKMIXM_20201228.0000.00_11.0_global
extracted it.
then used mi flash from this toolkit:
Code:
mi-globe.com_Xiaomi_MiFlash_Pro_EN_5.3.1104.39.exe
sorry, but I cant provide links to downloads.
Moribus said:
To solve update problem you need to Rollback to stable stock rom, I used this:
Code:
lmi_global_images_V12.2.4.0.RJKMIXM_20201228.0000.00_11.0_global
extracted it.
then used mi flash from this toolkit:
Code:
mi-globe.com_Xiaomi_MiFlash_Pro_EN_5.3.1104.39.exe
sorry, but I cant provide links to downloads.
Click to expand...
Click to collapse
This is nothing new. With the bootloader unlock you can flash any version of stock rom with miflash.
kopter36 said:
Yes i am able to successfully flashed twrp via fastboot afterward and directly proceed to root using magisk.
Everything works as usual, except, for me atleast, twrp now require pattern-type (3x3 dot) as password for decryption. Pin or character doesnt works.
Click to expand...
Click to collapse
Successfully updated to 12.2.4.0. However, my nova launcher has been 'uninstalled' after this upgrade and I am unable to reinstall it with install fail error coming up. I am installing from apk. Anybody has this issue?
I'm asking for opinions. What is the difference between ROM 13.0.19.0.SLCEUXM and xiaomi.eu_multi_XM12_V13.0.37.0.SLCCNXM
Benoni1 said:
I'm asking for opinions. What is the difference between ROM 13.0.19.0.SLCEUXM and xiaomi.eu_multi_XM12_V13.0.37.0.SLCCNXM
Click to expand...
Click to collapse
The first is stock rom intended for the European continent.
The second is a custom rom based on Chinese firmware with many modifications and latest developments.
Better than stock.
See here:https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Change version to stock rom(EEA to Global,etc) or install Xiaomi EU rom requires bootloader to be unlocked.
It is better to install the first ROM or the second one. Bootloader is unlocked. And I have a second ROM installed. Should I reinstall it? And I have to format in TWRP? Thanks for the answers.
Benoni1 said:
It is better to install the first ROM or the second one. Bootloader is unlocked. And I have a second ROM installed. Should I reinstall it? And I have to format in TWRP? Thanks for the answers.
Click to expand...
Click to collapse
Directly install the Xiaomi EU rom with the TWRP.
Twrp/wipe/format data type yes/reboot Twrp/Flash rom.
I just installed 13.0.19.0.SLCEUXM.
Benoni1 said:
I just installed 13.0.19.0.SLCEUXM.
Click to expand...
Click to collapse
Stock rom EEA for Europe.
I do not know how. I'm in bootloop, I can only go to fasboot or TWRP
Benoni1 said:
I do not know how. I'm in bootloop, I can only go to fasboot or TWRP
Click to expand...
Click to collapse
How did you install the rom and what rom do you want install?
I had 13.0.19.0.SLCEUXM there, but I formatted, apparently there is nothing there, the system says that it is not installed. Formatting doesn't work. I can only go to fastboot or TWRP. I do not know what to do. I would like to install such a ROM there, from which it will be possible to upgrade Android 13 when it is available. I don't know what to do. Thanks for the help.
Benoni1 said:
I had 13.0.19.0.SLCEUXM there, but I formatted, apparently there is nothing there, the system says that it is not installed. Formatting doesn't work. I can only go to fastboot or TWRP. I do not know what to do. I would like to install such a ROM there, from which it will be possible to upgrade Android 13 when it is available. I don't know what to do. Thanks for the help.
Click to expand...
Click to collapse
For a stock rom I always use MIFLASH
Use Miflash:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
DONT RELOCK THE BOOTLOADER
EDIT:
With a stock rom and a bootloader unlocking the play will not be certified.
This problem does not exist with XIAOMI EU ROMS.
Important:
What's the version of your phone?Global,EEA,CHINESE?
Global
Benoni1 said:
Global
Click to expand...
Click to collapse
So,if you use Miflash you can re lock the bootloader.
I like to use TWRP, Magisk so I don't want to lock the bootloader. I need to learn how to do with MiFlash. I was able to install the rom via TWRP. But I had big problems with formatting the data. It seems to be fine now.
Benoni1 said:
I like to use TWRP, Magisk so I don't want to lock the bootloader. I need to learn how to do with MiFlash. I was able to install the rom via TWRP. But I had big problems with formatting the data. It seems to be fine now.
Click to expand...
Click to collapse
You want to be up to date with the latest rom so why did you install an EEA rom when there is a stable global beta in A13.
https://xiaomifirmwareupdater.com/miui/cupid/
You have problems with the TWRP and you want to root and use modules, if you are a beginner these are not really things to do, with the root an error and the phone is broken.
Prevention is better than cure.