Installing Magisk on stock global miui - Xiaomi Poco X3 NFC Questions & Answers

Since kernel releases are yet to be published " a total duck move by xiaomi ?" I wanted to keep on using the stock ROM without changing anything but miui is too cringy for me to live with it, so I need to put the ol'rooting hat once again
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
I had a previous xiaomi phone (mido) but tbh I never even thought of using the miui and switched to RR once I unlocked the bootloader ?

You can get ota with magisk but updating will rewrite boot and recovery so you'll need to re-root.

mr-mero said:
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
Click to expand...
Click to collapse
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.

pnin said:
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
Click to expand...
Click to collapse
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Yes I know I would still have to flash twrp and magisk again after it
I'll test it on my old phone first , hope it can work as a reference for one last time of it's miserable life

mr-mero said:
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Click to expand...
Click to collapse
I thought the same, but then I'm not keen on moving to v12.0.4.0 right now, so I didn't budge. Let us know how it goes. :good:
.

How to install magisk on stock miui global after bootloader unlock?

@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.

pnin said:
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
Click to expand...
Click to collapse
yes i know that. using since 2015 TWRp. but i heard there is system wipe issue on poco twrp. if you installed it confirm

No issue here, just flashed it through TWRP as usual.
.

what about installing magisk from orangefox? What are the steps?

abubin said:
what about installing magisk from orangefox? What are the steps?
Click to expand...
Click to collapse
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...

yan2xme said:
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
Click to expand...
Click to collapse
thanks! done it and it is working now.

Related

Which version of TWRP bluespark?

I just currently got the latest ota and let it install and I installed magisk from the manager by choosing to install to inactive partition after ota. That worked flawlessly and was able to keep root. But I lost TWRP of course. I was using the official TWRP. I've been noticing everyone going to TWRP bluespark recovery. But which one do I download??? From what I understand there is a version for oos android 8 Oreo and a version for oos android 9 pie. I'm on official oos pie. So which one do I need?
vinnievegas said:
I just currently got the latest ota and let it install and I installed magisk from the manager by choosing to install to inactive partition after ota. That worked flawlessly and was able to keep root. But I lost TWRP of course. I was using the official TWRP. I've been noticing everyone going to TWRP bluespark recovery. But which one do I download??? From what I understand there is a version for oos android 8 Oreo and a version for oos android 9 pie. I'm on official oos pie. So which one do I need?
Click to expand...
Click to collapse
Just take the latest official TWRP and you are fine. Trust me.
https://dl.twrp.me/enchilada/
Thank you. But still would like to know if I decide to use bluespark version.
Sure. If you want to use Blu Spark TWRP use this one twrp-3.2.3-x_blu_spark_v9.86_op6
IMG and zip files are here https://forum.xda-developers.com/devdb/project/?id=27466#downloads
You can use TWRP official or Blu Spark TWRP. What ever you like. Blu Spark is recommended for people coming from oos beta to stable
Pundy said:
Just take the latest official TWRP and you are fine. Trust me.
https://dl.twrp.me/enchilada/
Click to expand...
Click to collapse
Pundy said:
Sure. If you want to use Blu Spark TWRP use this one twrp-3.2.3-x_blu_spark_v9.86_op6
IMG and zip files are here https://forum.xda-developers.com/devdb/project/?id=27466#downloads
You can use TWRP official or Blu Spark TWRP. What ever you like. Blu Spark is recommended for people coming from oos beta to stable
Click to expand...
Click to collapse
May I ask what the difference is?
Just to add a note to you for next ota.
After ota is installed go to magisk manager
Press download
Search for twrp a/b
Install (don't reboot)
Now go to main screen and press install
Choose to inactive slot (after ota)
This way you keep both twrp and root
Happy flashing
vinnievegas said:
May I ask what the difference is?
Click to expand...
Click to collapse
To be honest I don't know the differences between both.
vinnievegas said:
May I ask what the difference is?
Click to expand...
Click to collapse
You can find answer at its topic.
whizeguy said:
Just to add a note to you for next ota.
After ota is installed go to magisk manager
Press download
Search for twrp a/b
Install (don't reboot)
Now go to main screen and press install
Choose to inactive slot (after ota)
This way you keep both twrp and root
Happy flashing
Click to expand...
Click to collapse
Awesome!!!!! That's definitely a game changer!!
Thank you.
Hey, I have unlocked bootloader and have magisk installed.
But every time I have to go to bootloader to boot into twrp because of some issue.
I have the zip and img file of twrp by bluspark.
I have the img of bluspark twrp now I need to know which sector should I need to install. Boot, system or vendor? Please tell me. I'm new here.
there is a problem with magisk 20.1, first boot after all flashes is ok and magisk is working but after I giving root access to first program and going for restart its not booting and going to bootloader.
chetbiz said:
there is a problem with magisk 20.1, first boot after all flashes is ok and magisk is working but after I giving root access to first program and going for restart its not booting and going to bootloader.
Click to expand...
Click to collapse
Which OOS version are you running? Pie or Q?
Koeties said:
Which OOS version are you running? Pie or Q?
Click to expand...
Click to collapse
Android Q final
Hello, I have problem. I´m on Android 11, with OOS 11.1.2.2, but I can´t install TWRP - twrp-3.6.0_11-0-enchilada.img. When I wrote fastboot boot twrp-3.6.0_11-0-enchilada.img, it is stuck on logo a nothing happen. Please how to boot in twrp?
Thank you.

Lost twrp after miui 10 update

Hi, i have a problem with twrp. Lately i bought a Redmi Note 6 Pro, i waited the normal 15 days to unlock the bootloader, then I unlocked it and i flashed twrp, root, etc... The problem is that after the first update i made (MIUI 10 stable update) i lost root (which i think it's normal) and the twrp. TWRP recovery got overwritten by the default xiaomi recovery. How can i fix this? Because it's impossible to install twrp back after every update, i would have to format it evey time because of the locked internal storage! I'll leave some info below.
Ah and btw i tryed again yesterday with a new update and it happened again, so it wasn't just a one-time thing.
Phone: Redmi Note 6 Pro 4+64
MIUI version: MIUI Global 10.2 | Stable | 10.2.2.0(OEKMIXM) last version, i updated yesterday
TWRP used: unofficial twrp, the official one isn't out yet for my device. If it's needed i can send the iso or something
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Sent from my Redmi Note 6 Pro using Tapatalk
shakil002 said:
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Click to expand...
Click to collapse
Does it work for you or you lose it as well after update? Thank you anyway
Will this twrp work for latest version??
I lost root and TWRP after updating too.
I heard that everytime you update your phone, it replaces the TWRP and disable root. That's one of the reasons I will wait more before root my phone.
Guys i'm working hard to find a solution. If i find it i'll tell you. Please do the same if you find something
I think you'll need to do everything again (install TWRP and root).
GuilhermeXDA said:
I think you'll need to do everything again (install TWRP and root).
Click to expand...
Click to collapse
The bad part isn't re-installing twrp or root. It's that every time you do that you MUST format the data because insthead you wouldn't have access to internal storage from twrp, and that makes it impossible to flash anything
Bregaa said:
The bad part isn't re-installing twrp or root. It's that every time you do that you MUST format the data because insthead you wouldn't have access to internal storage from twrp, and that makes it impossible to flash anything
Click to expand...
Click to collapse
That's indeed the worst part. Better to wait for a recovery that can decrypt internal storage permanently.
Sent from my Redmi Note 6 Pro using Tapatalk
After flashing stock miui you have to flash disable vm cause the stock miui will replace the recovery with the stock one!
You all should learn about these topics more or stop experimenting with half knowledge.
When you are installing/ flashing any full MIUI ROM, you are also flashing the stock recovery that comes with MIUI. So it's natural that TWRP will get replaced.
So after flashing a new ROM, always flash TWRP and Lazyflasher too.
Always install/ flash a new ROM via TWRP and not through the System Updater app.
Hope this helped.
Flash TWRP then flash this : https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
for euopean country you should use EU rom, weekly OTA update and flashed by TWRP automatically,
only Magisk must be flashed again for root,
maybe for chinese developer rom it is the same procedure ?
Lost root
:
shakil002 said:
Used this recovery
https://forum.xda-developers.com/re...ment/recovery-twrp-3-2-3-0-atg-droid-t3891308
Sent from my Redmi Note 6 Pro using Tapatalk
Click to expand...
Click to collapse
The same thing happened to me with my S2 redmi device, I lost the recovery and root access, can someone help me with root in Miui 10.2?
Where can we find the MIUI updates to flash through TWRP?
GuilhermeXDA said:
Where can we find the MIUI updates to flash through TWRP?
Click to expand...
Click to collapse
http://en.miui.com/download-356.html
Draky50110 said:
http://en.miui.com/download-356.html
Click to expand...
Click to collapse
Thank you!

TWRP on Android 10

After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.

is it possible to upgrade from pie hos to a10 oos using local update?

hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Not sure if that will work, but locally upgrading from h2OS to OOS worked on my old op6 when I had it.
If it does not work;
Backup your files first then you need to unlock your bootloader.
Then boot twrp via command prompt. Once booted into twrp. Wipe data and do a factory reset there. Flash twrp installer then reboot into recovery.
Flash OB7, twrp installer and magisk then reboot to recovery again and flash ob7, twrp installer and magisk then reboot to system
I'm using .74
Not sure what the problem is/are.
Regards
Dark Fear said:
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Click to expand...
Click to collapse
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
theocdguy said:
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
Click to expand...
Click to collapse
so whats the right way to do it
Dark Fear said:
so whats the right way to do it
Click to expand...
Click to collapse
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
theocdguy said:
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
Click to expand...
Click to collapse
i'm already on oldest pie.. whats the difference of his method with the one i mentioned?

Question Flash official MIUI Update and keep TWRP custom recovery?

Hello,
I recently got this new phone, unlocked the bootloader, installed TWRP and rooted via Magisk.
I was on MIUI V12.5.3.0.RJUMIXM and had no OTA update available on my phone. I saw the V12.5.5.0.RJUMIXM in the MIUI Update Thread, so I downloaded and installed it. After flashing, my TWRP was gone, so I had to reinstall it via FastBoot.
Question: is there a way to keep TWRP Recovery when flashing official updates via TWRP? For example flash update and then flash TWRP again?
Another question: will I get official updates OTA when I have TWRP installed/bootloader unlocked? Or do I have to download and flash it manually every time?
Thanks in advance, kind regards
cavin
Official MIUI will restore its recovery. AFAIK, theres no way to keep your recovery.
You should consider installing xiaomi.eu
Lu5ck said:
Official MIUI will restore its recovery. AFAIK, theres no way to keep your recovery.
You should consider installing xiaomi.eu
Click to expand...
Click to collapse
Very strange that for me evry time i flash official MIUI(12.5.3 for exemple) my Orange fox recovery don't disappear ,i don't know about TWRP.
cavinrocks said:
Hello,
I recently got this new phone, unlocked the bootloader, installed TWRP and rooted via Magisk.
I was on MIUI V12.5.3.0.RJUMIXM and had no OTA update available on my phone. I saw the V12.5.5.0.RJUMIXM in the MIUI Update Thread, so I downloaded and installed it. After flashing, my TWRP was gone, so I had to reinstall it via FastBoot.
Question: is there a way to keep TWRP Recovery when flashing official updates via TWRP? For example flash update and then flash TWRP again?
Another question: will I get official updates OTA when I have TWRP installed/bootloader unlocked? Or do I have to download and flash it manually every time?
Thanks in advance, kind regards
cavin
Click to expand...
Click to collapse
You should try Orange fox recovery and see it it remains.
Antonio7489 said:
Very strange that for me evry time i flash official MIUI(12.5.3 for exemple) my Orange fox recovery don't disappear ,i don't know about TWRP.
You should try Orange fox recovery and see it it remains.
Click to expand...
Click to collapse
It will disappear during MIUI update, at least that is what I remembered.
Lu5ck said:
It will disappear during MIUI update, at least that is what I remembered.
Click to expand...
Click to collapse
No, it will not disappear if you are using OrangeFox.
Lu5ck said:
Official MIUI will restore its recovery. AFAIK, theres no way to keep your recovery.
You should consider installing xiaomi.eu
Click to expand...
Click to collapse
Thx everyone, I switched to xiaomi.eu ROM and TWRP-3.5.2-0 [vayu][bhima][R][11], works perfect.

Categories

Resources