Related
Hi,
I'm in the market for dual home and car chargers.
I never knew about QuickCharge 2.0 that my Note 4 and my wife A500F is capable of, but now I see that.
I can't find any "dual" charger from known firm (Lots of at AliExpress). Is it just unavailable ?
Is there really a big difference between QC2.0 capable charger and 2.5A charger ? (saw Anker 2.4AX2 or iOttie 2.5Ax2).
Thanks!
I haven't seen a Qualcomm 2.0 Quick Charge charger that is both AC and a car charger. Getwow has both an AC wall charger and a car charger. Check Amazon. I have the Getwow AC wall charger and it works well with my Note 4.
thanks.
I'm not looking for dual as for both car/ac.
I mean dual USB port. one for home and one for car.
how important is the Quick Charge 2.0 ?
my opinion, quick charge is critical. it really works especially when your device has been drained. I doubt i would ever get another device without it. It is more important to me than wireless charge which is a convenience
So, the charger for my old touchpad has the longest cord, and twist to lock is great..
But I've noticed that my phones all charge ridiculously fast on that charger (40 minutes from dead to 100% in most cases) and I'm wondering if maybe it's being detected as a quick charge plug? On stock, I didn't get the slow charging notification, and I don't get it on Viper or Bad Boyz either.
Does anyone know what it takes to NOT trigger the notification? Is it a certain pin out? I'd assume not, since you can use any cable with the Qualcomm wall wart.. Is it a specific voltage? Amperage? I know this charger is 2A, 3.5V and from what I can find on the Qualcomm specs is that a charger needs to be capable of 1.5A, 5V for quick charge certification, which puts my charger still 1.5V shy.
So why does my m9 charge to full in about 55 minutes, vs a few hours on stock, and NOT trigger slow charge notification when it's (afaik) not quick charge?
Can someone else with a stock touchpad charger that gets the slow charge notification test this out for me? If it turns out this is basically an uncertified quick charger purely by virtue of coming out before QC, that would give us an option for QC on the cheap!
So far the best I can find is that the reason this charger does so well is because the touchpad is a power hungry beast and needs a beefy charger, more so than regular tablets. I guess that explains it. It's putting out more than a phone charger usually would, which is why it isn't triggering the slow charging prompt
My daughter "inherited" my touchpad, but I believe its charger was 2 amps
Sent from Tapatalk on either my HTC One M9 or Tab4 10.1, it kinda depends
My touchpads wall wart puts out 5.1 volts and 2.1 amps, with it's quality cable. It is the fastest charger I have out of the dozens I have tried. Most put out less current/amps and that is why it can charge so fast my comparison. But know that one bad USB cable can make the fastest charger slow. I used the galaxy charging app to test my cables on it, and found some of my USB cables would only do 400ma no matter which charger they were in, so I threw out or marked all those so I wouldn't use them for fast charges.
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a non-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Stay on topic guys. OP asked a question, which could be answered with facts, rather than opinions and scenarios. In my regular car charger, I go from 22 to about 70 in 40 minutes, if I can recall correctly.
ItsLaggyY said:
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
Click to expand...
Click to collapse
I'm not sure if you're serious or sarcastic, but In case of the former, here are a few reasons why someone might be interested in charging with other than the Dash Charger:
1) AFAIK, Dash is available in AC mains or 12V Car charger versions. I often use a 20K mAH Anker powerbank battery for charging. That is usually in situations where other power is not available, but a quick charge is needed. Huge current is available, but would the OP6 use it?
2) I use a compact travel charger that has 5 USB charging ports. Using a Dash charger would require carrying another charger (big, bulky, without retractable prongs), and occupying one (or more due to the shape) additional AC outlets.
3) I have a phone charger in my bedroom, at my desk, in my travel bag (both AC and Car style), and in my car. A quick check on Amazon seems to indicate that the Oneplus6 charger is several times more expensive than other "quick charge" chargers. Over multiple charger locations, the extra costs add up.
Using the word "like" so many times makes it difficult to understand the post.
dwj said:
Using the word "like" so many times makes it difficult to understand the post.
Click to expand...
Click to collapse
I'm Irish, apology
I have a stockpile of fast chargers that used the weird Nexus standard (5V, 3A, non QC) and they're okay, and for overnight or at my desk at work that's plenty fast to get the job done. The phone shows them as "charging" and not "charging slowly."
I purchased a "Tinduqin oneplus5T charger" from Amazon that works and looks exactly the same as the original dash charger for about $20, but it seems to already be sold out.
If you don't use dash charger,you only can charge at 5v 1.5a,I have tested it with apple 45w pd charger,xiaomi qc3.0 and nexus 5v3a charger
timg11 said:
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a anon-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Click to expand...
Click to collapse
It won't charge very fast because it doesn't use any on board quick charge it's all in the dash charging brick
I have a bunch quick chargers 3.0 at home. It takes a life time. I end up buying the dash charger. I still use the quick charger for over night charging
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
x111 said:
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
Click to expand...
Click to collapse
Do you own the OP6? Do you have a USB power meter that could measure the charging current with and without the Dash charger and reply with the values?
On my Note 4, it charges at about 1.17A / 5 V when the screen is on, and the current goes up to 1.6A with the screen off. That is with either a QC2 Quick Charger or a battery power pack. The phone reports "quick charger connected" in both cases.
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
1N1ghth4wk said:
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Click to expand...
Click to collapse
Is it possible to use a the original DASH-adapter but with another USB-C cable? I need a longer cable so I can use the phone whilwe charging.
OnePlus has a original cable for sale which is only 150cm Long.
My question is if I can buy any other manufacturers cable whish also support some sort of fast charging. I've heard for example that DASH-charging is the same charging model that Huawei P20 Pro uses, they just have different name. .
So, is there anyone here that has switched the OP original cable and charge it up with a cable from another manufacturer?
There has to be a solution to this. Me myself can't. be the only one that needs s longer cable.
x111 said:
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
Click to expand...
Click to collapse
That's normal. Phones pull the most amps when on low battery, then progressively less as they are charged.
Check how much it pulls on <40% and <80% respectively.
Well, I charged my Op6 with a no-name USB 3.0 charger yesterday (forgot my dash charger at home, I was by a friend) and from 3% to 100% it took about ~1 hour and 55 minutes.
Not that bad I guess. But I still prefer my dash charger
I'm using a huawei p20 pro charger atm. Phone states from 75 - 100 it will take 33 minutes. (prob a bit faster if I don't use the phone.
Here is a charging session with a Oneplus 2 charger without quick charge
Charging from 27% to 100% in 2 hrs, 40 min - avg. Charging speed: about 1000 mA/h
Hello,
I'm using this old thread since we're talking about the same thing.
Is there a kernel or rom for the OP6 that enables to draw as much current as possible form third party chargers? It's sad that it's stuck at 1.5A no matter the charger unless you use dash charger. 2A is already something, 3A would be awesome.
Of course only if this a software limit.
Hello,
What you think about this car charger?
Is it fast enough?
Thank you
Seeing how it handles 125-watt and the phone only handles somewhere between 20 and 35-watt maximum, then yes, it's fast enough. Personally, I rarely fast charge.
So it's great product and fast charging even with GPS and Bluetooth, and yes the phone will not use the 125-watt but we have something for the future
If it does what it promises, then it's a great deal, even if its capabilities exceed our current phones' charging capacity. But I'm somewhat risk averse, especially with high charging rates. I, therefore, bought the Scosche CPDCC60 dual charger from Amazon.
Has anyone tried the following charger?
Baseus USB-A+USB-C Car Charger 65W
Charge your phone and Laptop together while on the road with baseus 65W dual port car charger. PD 3.0 and PPS technologies deliver 5X faster charging time than standard 5V/2.4A chargers.
www.baseus.com
According to the website, it supports PD 3.0, PPS and up to 65 W. So, in theory, it should work with the Pixel 7 Pro.
Thanks
When i plug my P7P in to an Anker Nano III the P7P vibrates 4 times about 10 seconds apart before charging commences normally, is this how a PPS charger negotiates with the phone or is there a problem be it the charger or the phone?
Didn't even know what PPS was, but just did some reading on it. That explains my car charger. The delay happens no matter what I plug up, my iPad, wireless earphones cases, Pixel 4 XL, and now my 7 Pro. Seems like they're working as intended.
What is PPS Fast Charging, and What’s the Difference Between PD, QC, and PPS?
As the latest addition to the PD 3.0 standard, the PPS fast charging standard is the best charging technology for USB-C devices. Get a RAVPower PPS fast charger and power your devices in minutes!
blog.ravpower.com
Never noticed this with my OnePlus 9 charger (that's also a PPS charger). I'll have to look out for it next time.
MrBelter said:
When i plug my P7P in to an Anker Nano III the P7P vibrates 4 times about 10 seconds apart before charging commences normally, is this how a PPS charger negotiates with the phone or is there a problem be it the charger or the phone?
Click to expand...
Click to collapse
Well, even if the charger fails to negotiate the PPS charging protocol, it would be still charing at minimum speed, usually the standard 5 Volts at around 1-2 Amps (depending on the charger/phone).
It seems like it's being interrupted for some reason. Unless you have the same issue with other chargers, I'm pretty sure it's the charger you're trying to use (Maybe even the cable).
MrBelter said:
When i plug my P7P in to an Anker Nano III the P7P vibrates 4 times about 10 seconds apart before charging commences normally, is this how a PPS charger negotiates with the phone or is there a problem be it the charger or the phone?
Click to expand...
Click to collapse
I've noticed that recently with newer chargers, some even explicitly mention it on their pages.
I don't know why newer ones are doing this compared to older PPS chargers, speculating either lower cost for a charge control chip that instead has to reset between negotiations or it's intentional to solve bugs with devices that might not negotiate right unless the connection is reset.
Cheers for the answers everyone, if it wasn't for the regular nature of the handshake (for want of a better description) and then charging as you'd expect I'd say the charger is wonky (Anker Nano III) simply because it is brand new.
I have ordered a new cable just to rule that out all my old cables as well.
I must have more charging bricks knocking about than a charging brick shop but from what i can gather only the Nano III is a PPS one
Hopefully it is OK now and the new cable seems to have sorted it out but i guess i will see more in the coming days.
The cable i got is an Anker 643 (just for future reference) I have always used Anker cables so i must have had an iffy one.
Hi, i noticed that my phone wasn't fast charging, despite i have an anker that reaches 18w. What kind of charger can i buy that allow my pixel to have fast charge?
Yoshito93 said:
Hi, i noticed that my phone wasn't fast charging, despite i have an anker that reaches 18w. What kind of charger can i buy that allow my pixel to have fast charge?
Click to expand...
Click to collapse
Any charger which can handle at least 23w. Anything over that(per port) will be useless.
Also the biggest gripe of the Pixel 7 series is not having rapid charging.
Thank you for the reply! I had to buy a new charger because mine was not compatible I guess. The phone didn't show up the "fast charging" indication and it took 2.20 hrs to charge from 30% to 100%.
The Anker Nano 3 is 30W, PD 3.0 and PPS this is the UK version but all other regions version have folding pins which make it super compact.