Hello everybody...I've bought a px30 for my Alfa Romeo GT.
SWC doesn't work and volume is too loud (the car has a BOSE amplifier), so I'd like to modify some stuff in the factory settings.
I've tried all the passwords found on the internet but nothing... any suggestions?
I'd like to enter in the build.prop, I've read that in there should be the password...
Thanks
vegeta491 said:
Hello everybody...I've bought a px30 for my Alfa Romeo GT.
SWC doesn't work and volume is too loud (the car has a BOSE amplifier), so I'd like to modify some stuff in the factory settings.
I've tried all the passwords found on the internet but nothing... any suggestions?
I'd like to enter in the build.prop, I've read that in there should be the password...
Thanks
Click to expand...
Click to collapse
Is it an MTCD/E?
vegeta491 said:
Hello everybody...I've bought a px30 for my Alfa Romeo GT.
SWC doesn't work and volume is too loud (the car has a BOSE amplifier), so I'd like to modify some stuff in the factory settings.
I've tried all the passwords found on the internet but nothing... any suggestions?
I'd like to enter in the build.prop, I've read that in there should be the password...
Thanks
Click to expand...
Click to collapse
To my factory settings the code is "126"
Related
Hi all.
Is it me or it is not possible to change the disgusting default ringtone which comes with an headset (cable or via bluetooth)?
I tried to dig in the options menu, but there is nothing... Without the headset you can do it, of course...
Anyone with a solution?
Thx.
Diamantes said:
Hi all.
Is it me or it is not possible to change the disgusting default ringtone which comes with an headset (cable or via bluetooth)?
I tried to dig in the options menu, but there is nothing... Without the headset you can do it, of course...
Anyone with a solution?
Thx.
Click to expand...
Click to collapse
Even i dint find that bud .thanks for making me aware of this
Everything works fine but WiFi and BT after changing the board. So far I tried upgrading MCU, selecting all options available for BT type on BT settings on factory settings but none works.
When I go back to PX3 board, WiFi and BT work again with the same BT setting on factory settings.
Any suggestions?
BR
hmotwr said:
Everything works fine but WiFi and BT after changing the board. So far I tried upgrading MCU, selecting all options available for BT type on BT settings on factory settings but none works.
When I go back to PX3 board, WiFi and BT work again with the same BT setting on factory settings.
Any suggestions?
BR
Click to expand...
Click to collapse
Wich unit (manufacturer) did you have prior to update?
Perhaps you have yo move to other manufacturer mcu update that supports to px5
Enviado desde mi D6603 mediante Tapatalk
I had HXD, unknown to many, I have now HA 2.59 wich works all right with the px3 board, but wifi and BT won't work when I install the px5
Afaik...bt & wifi are out of px5 board....are you sure you have connected well your px5 board?
And did you try before upgrading to HA if with HXD worked?
I suggest you to ask these questions on the specific thread used to buy the px5 board
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
Afaik...bt & wifi are out of px5 board....are you sure you have connected well your px5 board?
And did you try before upgrading to HA if with HXD worked?
I suggest you to ask these questions on the specific thread used to buy the px5 board
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
It didn't work with the HXD MCU either. Board is connected ok, all pins in.
Are you on malaysk s rom?
Nomader0 said:
Are you on malaysk s rom?
Click to expand...
Click to collapse
Tried malasyk ROM, didn't work either.
This is a picture of the network card. Looks like the same on most of the current HUs
https://goo.gl/photos/TcrY75wZc3F2Tbkw7
To me, no autosleep after upgrade PX3 to PX5. No chance.
So the upgrade isn´t fully compatible to the units compare with the car.
Had the same problems as well. No BT no wifi- px5 board was mounted well (thought so). After remounting it again both worked. Set up my account and after using it for 3 hrs the connection failed again... Then I found out that I had to press it better on the board again and had to tighten up the screws again. Right now- it works since one week.
makes2068 said:
To me, no autosleep after upgrade PX3 to PX5. No chance.
So the upgrade isn´t fully compatible to the units compare with the car.
Click to expand...
Click to collapse
Dont you have a unique/vehicle specific issue with canbus. My understanding is that you were able to enable autosleep by disabling canbus.
That's quite different to 'isnt fully compat.'
Suggest providing context when making statements that might imply to others that there is a significant compatibility issue.
Cheers.
hmotwr said:
Everything works fine but WiFi and BT after changing the board. So far I tried upgrading MCU, selecting all options available for BT type on BT settings on factory settings but none works.
When I go back to PX3 board, WiFi and BT work again with the same BT setting on factory settings.
Any suggestions?
BR
Click to expand...
Click to collapse
everybody solved the problem? i also have the same issue. please advice. thanks.
Nope, no solution yet.
hmotwr said:
Nope, no solution yet.
Click to expand...
Click to collapse
What is the bluetooth module set in Factory Settings for your HU with PX3 board installed?
Also please install terminal emulator like Termux (available at play store) and type command ps | grep gocsdk, ps | grep sdsdk and post output here.
marchnz said:
Dont you have a unique/vehicle specific issue with canbus. My understanding is that you were able to enable autosleep by disabling canbus.
That's quite different to 'isnt fully compat.'
Suggest providing context when making statements that might imply to others that there is a significant compatibility issue.
Cheers.
Click to expand...
Click to collapse
No thats not correct. Disabling canbus = no ignition starting anymore. Only manual power on and off.
So to me, it isn´t fully compatible. That´s an important information to others to beware them of possible problems.
[email protected] said:
No thats not correct. Disabling canbus = no ignition starting anymore. Only manual power on and off.
So to me, it isn´t fully compatible. That´s an important information to others to beware them of possible problems.
Click to expand...
Click to collapse
Again, vehicle specific issues potentially related to wiring issue and the factory settings for power on not set correctly. This is nothing to do with the MCU revision. My understanding is that you experienece sleep issues and then blamed cross mcu update because of this new issue.
The very issue of you machine not sleeping is a great enough indication that other issues are at play.
Wiring issues not possible cause there is only one wire (battery+) connected. Ignition power is set by canbus.
So, what should be wrong?
Power settings in factory settings are not possible. Tell me where they are!
There is only one setting called Power status (on, off, remind latest)
[email protected] said:
Wiring issues not possible cause there is only one wire (battery+) connected. Ignition power is set by canbus.
So, what should be wrong?
Power settings in factory settings are not possible. Tell me where they are!
There is only one setting called Power status (on, off, remind latest)
Click to expand...
Click to collapse
can you do me a favor,
can you cut the ignition power and connect it to a 12 volt live and when the units boots up, remove the cable and see what it does..
just try to take control of that as a test.
in my case i have cut the wire and connected to another 12 volt source that gives power for 3-4 minutes after car has been locked.. if i let it as it was, as soon as i would remove the key the unit would initiate a shut down..
???
Got no ignition power wire connected! So i can´ t cut it!
Quadlock from VW hasn´t got such a wire. Only battery+
That can not be.. can you post photos of the back of your unit and cables
Hello,
I bought a head unit for a Volvo S60 2005, but the Steering Wheel Controls doesn't work.
And in the factory menu, in the CANBUS section, there is a lot of car manufacturers (Peugeot, GMC...) but not Volvo.
The detail of the head unit:
MTCE_KSP_V2.77_1
PX3
Android 7.1.2
Do you know a solution for this problem ?
Thank you
I hope you have been able to find a solution meanwhile since i dont know much about canbus in general.
Tho i have a question: what is the passcode for the factory settings of your KSP head unit? Searching the web up and down i haven't found a working code for my KSP.
Thanks in advance
Gerolsteiner said:
I hope you have been able to find a solution meanwhile since i dont know much about canbus in general.
Tho i have a question: what is the passcode for the factory settings of your KSP head unit? Searching the web up and down i haven't found a working code for my KSP.
Thanks in advance
Click to expand...
Click to collapse
m123456
Have you solved this Issue yet? My HU hast some Volvo settings for XC60 and S60. But none of them fully work.
While mines in a BMW, I couldn't get my steering wheel controls to work either until just this evening. Do you have a specific app that controls your CANBUS stuff? For example mines called iBUS, it was an app I had to download the Google since it wasn't on the PlayStore. I just happened to be playing in the app, saw a box was unchecked for CANBUS volume control...boom, controls work now. Maybe try downloading the iBus app anyways and see if checking the box works for ya.
m5james said:
While mines in a BMW, I couldn't get my steering wheel controls to work either until just this evening. Do you have a specific app that controls your CANBUS stuff? For example mines called iBUS, it was an app I had to download the Google since it wasn't on the PlayStore. I just happened to be playing in the app, saw a box was unchecked for CANBUS volume control...boom, controls work now. Maybe try downloading the iBus app anyways and see if checking the box works for ya.
Click to expand...
Click to collapse
iBus only works for BMW. I don't have a specific app for controlling canbus settings. Only the factory settings of the HeadUnit itself.
Just wondering: Don't these head units use a config file for each car model?
Are they in a directory and you can just add another?
Has anybody generated a custom one when the stock ones didn't work?
I would presume that they would look something like a keylayout?
Code:
# Config file for Studebaker
can 1234 VOLUME_UP
can 1235 VOLUME_DOWN
Does anyone have an example? Are they semi-standardized?
Does the CAN bus appear as a Linux device in /dev ?
Are there apps to just dump everything so that you can identify things?
Obviously, I'm speaking only of when the head unit takes the CAN bus directly in itself without an external box.
JoshuaLu said:
iBus only works for BMW. I don't have a specific app for controlling canbus settings. Only the factory settings of the HeadUnit itself.
Click to expand...
Click to collapse
I realize the app is for BMW's, my point was to try it anyways to see if it changes anything within the stereo itself.
Good afternoon, someone knows how to improve the audio of bluetooth calls, it's too low, I can't hear the other person no matter how much I turn up the volume on the radio.
Also when I call or they call me it only shows the contact number but not the name. How to fix this or is it?.
I would be interested in the same thing.
For me what my plan is to:
- change volume of BT call in Factory Settings all the way up (already done)
- install an external electret condeser directional microphone (to do that I am still working on an electric module that will give a stable 5V bias voltage to the mic, which I will connect to the headunit external mic.
Other than that, I believe all the rest can be done by firmware update by Teyes. I don't thinks its hardware fault.
ttoton said:
I would be interested in the same thing.
For me what my plan is to:
- change volume of BT call in Factory Settings all the way up (already done)
- install an external electret condeser directional microphone (to do that I am still working on an electric module that will give a stable 5V bias voltage to the mic, which I will connect to the headunit external mic.
Other than that, I believe all the rest can be done by firmware update by Teyes. I don't thinks its hardware fault.
Click to expand...
Click to collapse
but the firmware update is not available yet
remonunez said:
Good afternoon, someone knows how to improve the audio of bluetooth calls, it's too low, I can't hear the other person no matter how much I turn up the volume on the radio.
Also when I call or they call me it only shows the contact number but not the name. How to fix this or is it?.
Click to expand...
Click to collapse
You should also turn up the Bluetooth volume on your phone when it's connected. If that's too low, the Amp on the radio can't push it much either.
remonunez said:
but the firmware update is not available yet
Click to expand...
Click to collapse
Yes, I guess we need to wait and hope that they will change that. Eventually.
Hello everyone l have installed TEYES CC3 in my car they said that the unit is compatible with Android auto l tried several means to connect it to my unit in vain, the Bluetooth bottom of CARKIT on Android auto in mobile phone remain blocked any solution please?
Bas14 said:
Hello everyone l have installed TEYES CC3 in my car they said that the unit is compatible with Android auto l tried several means to connect it to my unit in vain, the Bluetooth bottom of CARKIT on Android auto in mobile phone remain blocked any solution please?
Click to expand...
Click to collapse
There is not actuallized to car play yet.
Just conected on bluetothh
remonunez said:
There is not actuallized to car play yet.
Just conected on bluetothh
Click to expand...
Click to collapse
I am using Android phone not iPhone, thank you for your attention.
Hello can someone tell me how to add password to lock and unlock my TEYES CC3 heat unit please?
Bas14 said:
Hello everyone l have installed TEYES CC3 in my car they said that the unit is compatible with Android auto l tried several means to connect it to my unit in vain, the Bluetooth bottom of CARKIT on Android auto in mobile phone remain blocked any solution please?
Click to expand...
Click to collapse
only wired works. mine only works on USB port 2
JoRastaf said:
only wired works. mine only works on USB port 2
Click to expand...
Click to collapse
Wireless works but you need the apk carkit 2.0 and change wireless settings to 5 ghz in car kit
young0ne said:
How can I make it that the headunit auto connects to my hotspot from my phone. I hate that I have to go to WiFi and click it it makes no sense. My old headunit would connect automatically
Click to expand...
Click to collapse
Ok thanks, where can l get the APK carkit 2.0 please?
young0ne said:
Wireless works but you need the apk carkit 2.0 and change wireless settings to 5 ghz in car kit
Click to expand...
Click to collapse
Hello youngone, where can l get the carkit 2.0 please
young0ne said:
Wireless works but you need the apk carkit 2.0 and change wireless settings to 5 ghz in car kit
Click to expand...
Click to collapse
Are you suggesting that the CC3 supports wireless Android Auto?
NuXeR said:
Are you suggesting that the CC3 supports wireless Android Auto?
Click to expand...
Click to collapse
My CarPlay in CC3 is wireless for my iPhone so yes it’s wireless
Many units support wireless Apple Carplay but NOT wireless Android Auto, only wired.
tRidiot said:
Many units support wireless Apple Carplay but NOT wireless Android Auto, only wired.
Click to expand...
Click to collapse
Correction: They provide an emulated/hack of Carplay and AA - which invariably break with updates.
My CC3 can do wireless Android Auto, tested and confirmed
Hello Khan187, which CC3 did you buy, 3,4, 6GB that support AA wireless and where did you purchase it? if you don't mind. I also, would like to know the audio quality when you are in a phone call. I have a YT7260B and the phone quality is bad, people repeat to themself and sometime they hear me little noisy, I am planning in getting a Teyes CC3. thanks
Hi all I was wondering if anyone can help me. I recently bought a px6 android 10 head unit, all was well till my bluetooth stopped working. My HU can't find my phone and phone can't find HU. I have factory reset but to no avail. I will attach pictures of settings page, and bluetooth module. Thanks in advance for your help
Hi with my PX6 I didn't use Your MCU but the MTCE_HA_V3.40.1
If the phone can't find the head unit then it's probably a hardware issue. Either the BT is turned off or the BT board is blown and needs replace.
Tommy14614 said:
Hi all I was wondering if anyone can help me. I recently bought a px6 android 10 head unit, all was well till my bluetooth stopped working. My HU can't find my phone and phone can't find HU. I have factory reset but to no avail. I will attach pictures of settings page, and bluetooth module. Thanks in advance for your help
Click to expand...
Click to collapse
Logcat + dmesg