changing ringtone with cable headset or bluetooth on - Honor 6X Questions & Answers

Hi all.
Is it me or it is not possible to change the disgusting default ringtone which comes with an headset (cable or via bluetooth)?
I tried to dig in the options menu, but there is nothing... Without the headset you can do it, of course...
Anyone with a solution?
Thx.

Diamantes said:
Hi all.
Is it me or it is not possible to change the disgusting default ringtone which comes with an headset (cable or via bluetooth)?
I tried to dig in the options menu, but there is nothing... Without the headset you can do it, of course...
Anyone with a solution?
Thx.
Click to expand...
Click to collapse
Even i dint find that bud .thanks for making me aware of this

Related

Bluetooth headset profile

Guys,
I did search through the forum and I found several users with the following problem but no solution yet.
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Is there a solution for this?
PS: My bluetooth headset is a Motorola H700.
pms said:
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Click to expand...
Click to collapse
I use a Plantronics 510 (or something like that) and I haven't had any problems with WM6 disconnecting from it like you describe. I have went to answer the phone with it a couple of times and it didn't seem to be linked up, but I just press the button on the headset and it links right up and then answers the call on the next press. But thats only happened a couple of times and I think each of those times I had walked away from my phone so probably went out of range (so I'm guessing the phone just hadn't noticed the BT headset being in range yet).
Try deleting the partnership and setting it up again after a soft reset.
I too have a Plantronics Voyager I think its called and I have not had this problem. I tossed my Motorola BT because the audio level was way too low on it.
pms said:
Guys,
I did search through the forum and I found several users with the following problem but no solution yet.
I use a bluetooth headset a lot (not a stereo, just a regular one!) and when I answer a call, people on the other side can not hear me. I have to go to bluetooth setting and do "Set as handfree" on the device so that it works again.
But it only works for a couple of minutes! The next call that I use my headset I need to do it again.
Is there a solution for this?
PS: My bluetooth headset is a Motorola H700.
Click to expand...
Click to collapse
golfernutnflorida said:
Try deleting the partnership and setting it up again after a soft reset.
I too have a Plantronics Voyager I think its called and I have not had this problem. I tossed my Motorola BT because the audio level was way too low on it.
Click to expand...
Click to collapse
I tried that and it did not work... Thanks for trying anyway...
Did you try when you tick the hands free that you used the enter button on the D pad instead of the other button?
pms said:
I tried that and it did not work... Thanks for trying anyway...
Click to expand...
Click to collapse
I've reported the same issue with Farias ROM I am using WM6. I use a Plantronics, have to keep going back and selecting it as the handsfree.
Don't know if it a WM6 problem or a Faria problem...annoying I know.
golfernutnflorida said:
Did you try when you tick the hands free that you used the enter button on the D pad instead of the other button?
Click to expand...
Click to collapse
hey.... it worked!!!! At least so far! :-D
I have repaired the headset (but I tried that several times in the past!) and untick the hands free and ticked it again and now I have tried several times and it seems that it is working.
I do not understand way. Can you explain I this non-sense procedure solves the problem
I had a little problem pairing my Plantronics Explorer 340 with my device, but after the pairing, it did work without any problems. apparently some WM6 roms out thre are having this issue. I would suggest re-flash your device and se how it works
I have a Plantronics 655 and don't have this problem. The only thing out of the ordinary that I do when pairing though is re-name the headset (defaults to 6xxPlantronics, I change it to Plantronics 655)
However, I experience a slightly different problem. My BT headset and handset don't automatically re-pair after returning in range or resetting the handset. Anyone else experiencing this?
Everytime I walk out of range or reset my phone, I would have to turn off my headset then turn it back on for the two to pair back up. I sometimes forget and when I hear the handset ring, I pick up w/ the headset only to find that they're no longer paired. Is there a way to have the two automatically pair back up? I never had this problem when I was using AKU3 roms and the stock Cingular 2.25 ROM.

Headset problems.. plz help

Hi, the headphones that came with my Cingular 2125 (HTC Faraday) doesn't work in my phone, but works in everyone elses phone that i try, and that A2DP program doesn't work either with my bluetooth handsfree set either... any help on either one of them is much appreciated. (bought my phone off ebay and they may not be the same headphones that come with it, but it fits and works in any other phone i try...)
Thanks a lot.
jman030 said:
Hi, the headphones that came with my Cingular 2125 (HTC Faraday) doesn't work in my phone, but works in everyone elses phone that i try, and that A2DP program doesn't work either with my bluetooth handsfree set either... any help on either one of them is much appreciated. (bought my phone off ebay and they may not be the same headphones that come with it, but it fits and works in any other phone i try...)
Thanks a lot.
Click to expand...
Click to collapse
Did you install the a2dp patch?
no, i didn't know their was one. im going to look for it now and see if it solves my problems. but it may be my bluetooth. i have a Motorola H3 bluetooth headset
edit i installed the fix and when i go to settings >connection> bluetooth> Menu>Devices>Motorola H3 i get the option of headset but i cant hear music through it. do i need a different media player?
or is there any way to get my phone to recognize the orignal headphones it came with.
The motorola h3 isn't an a2dp headset. I'd suggest the motorola s9, which is absolutely the best I've ever tried (and I've tried alot), but expensive. with an a2dp headset, you'll get an options for "headset" and "wireless stereo".
You can get music to go a non-a2dp headset, but it somewhat of a pain, and sounds like crap anyway.
But it is wierd that your wired headset doesn't work w/ your phone. when you plug it in, does it automatically switch to 'headset' profile?
@ dm251z, nope it doesnt automatically say headset or switch into the headset profile nor does it allow me to select it.
I suspect that there is hardware problem, but of course I have no way of knowing. normally, you can stick just about anything into the headphone jack, and the phone will automatically switch to headset profile (I just tried sticking in an adapter w/o headphones, and that switched it). I don't think that that profile can be switched manually, only hardware controlled. So maybe the headphone jack is shot.
sorry I can't be of more help. I guess I'd suggest trying stereo bluetooth. You can't go wrong with a decent bluetooth headset...even if the phone is shot, you can still use the headset with your next phone. Also for the a2dp patch to work, make sure that your phone has the latest ROM installed, or at least some version of aku 2.x
good luck.
ok. thanx alot for all your help. i even tried a friend of mines adaptor and it didnt work either so i guess ur right. o well. thanx again.

call waiting tone w/stereo bluetooth

now have tried 3 different stereo bt sets and while in stereo mode I get no call waiting tone. if I put in handsfree mode it works just fine. haven't been able to find a solution to this one yet. same on every rom I've tried
sirooga said:
now have tried 3 different stereo bt sets and while in stereo mode I get no call waiting tone. if I put in handsfree mode it works just fine. haven't been able to find a solution to this one yet. same on every rom I've tried
Click to expand...
Click to collapse
try this
HKey_Current_User\ControlPanel\Sounds\BusyTone\Category - InCall
was InCall4
bump
well I changed incall4 to incall and it didnt do anything to help. Is nobody else experiencing this? Is it related only to a tilt maybe? Just got a jabra 8040 which is amazing except I cant leave it in stereo mode due to not being able to hear call waiting.
I have the Plantronics 855 w/A2DP and my call waiting doesn't work either.
Msgadget
My Motorola s9's don't have the tone either.

Make phone ring when bluetooth is connected?

I've searched, but seems that nobody was able to find the answer.
I got a bluetooth headset that's pretty much always connected, but not always in my ear.
Problem is that phone doesn't ring (there no sound, only vibration) when there's bluetooth connected. Can I make it always ring?
DarkDvr said:
I've searched, but seems that nobody was able to find the answer.
I got a bluetooth headset that's pretty much always connected, but not always in my ear.
Problem is that phone doesn't ring (there no sound, only vibration) when there's bluetooth connected. Can I make it always ring?
Click to expand...
Click to collapse
My bluetooth is also always connected to my phone. What I do is that in the bluetooth settings, I uncheck the "Wireless Stereo" checkbox. In this case, my phone rings as per normal and I can still pick them up using my bluetooth.
But won't that turn off my stereo headphone functionality (i.e. stereo music)?
I got Voyager 855 which also acts as stereo headphones.
DarkDvr said:
But won't that turn off my stereo headphone functionality (i.e. stereo music)?
I got Voyager 855 which also acts as stereo headphones.
Click to expand...
Click to collapse
Well, you can always check the option when you need to use them as stereo headphones.
that's work.. =)
Isn't there an easier way?
Had this happen to me as well on the Voyager 855, but it started working again. See my post/resolution in thread.
http://forum.xda-developers.com/showthread.php?p=3579647#post3579647
Let me know if it works for ya!
Anas
worked fine ...
it was my problem with Cyanogenmod Rom.
thanks
: long press on device name to get [options]
- Un-check [Media]
- keep [Connect] and [phone] checked.
enjoy ....
hTc Desire , Cyanogenmod 7.0.3
SonyEricsson MW600 BT headset.
Cyanogen Mod
I have recently had this problem with the Cyanogen Mod
Here is my solution:
Open "Settings>Cyanogen Mod Settings>Sound"
Scroll down to the "Always Play on Speaker" section
Tick the "Ring Tones" check box
p.gogarty said:
I have recently had this problem with the Cyanogen Mod
Here is my solution:
Open "Settings>Cyanogen Mod Settings>Sound"
Scroll down to the "Always Play on Speaker" section
Tick the "Ring Tones" check box
Click to expand...
Click to collapse
I had to reboot for these setting to take effect. Other than that, this is exactly what I was looking for. Thank you!
I didn't get the phone ringtone in my wireless headphone Redmi note 5, mobile
$
Seifer1975 said:
My bluetooth is also always connected to my phone. What I do is that in the bluetooth settings, I uncheck the "Wireless Stereo" checkbox. In this case, my phone rings as per normal and I can still pick them up using my bluetooth.
Click to expand...
Click to collapse
Thank u. Ur suggestion solved the problem.

[Q] Can't make calls with Backbeat 903

All you guys who have the 903s, are you able to make a call successfully using the headset?
There's no way (I think) of starting a call from the headset so I make it from the phone, but it doesn't transfer the call to the headset.
Am I missing something?
(Using LeeDroid 2.1a)
fergusstrachan said:
All you guys who have the 903s, are you able to make a call successfully using the headset?
There's no way (I think) of starting a call from the headset so I make it from the phone, but it doesn't transfer the call to the headset.
Am I missing something?
(Using LeeDroid 2.1a)
Click to expand...
Click to collapse
Try going to bluetooth setting while the headset is connected select and hold the backbeat and then choose options un-select and then re-select phone. I had the same problem, and this worked for me.
harolds said:
Try going to bluetooth setting while the headset is connected select and hold the backbeat and then choose options un-select and then re-select phone. I had the same problem, and this worked for me.
Click to expand...
Click to collapse
Sorry to jump in like that But i'm looking into those backbeat 903... do you like them? Planning to buy a set for my nexus one... Will I be disapointed? Is the music cutting?
Thanks!

Categories

Resources