Just a simple magisk module to make put the clock in the center.
NOTES
-----------------
This will cause issues with android auto!
Confirmed working on OOS 11.0.5.6.KB05AA (Global Rom)
Installation
-------------------
Pre-requisites
Rooted Oneplus 8T
Android 11 Stable
Magisk Manager
Installation instructions
1. Download the module from here:
Center Clock Module
Right Clock Module (Put The Clock on The Right)
2. Copy to your phones storage
3. Open Magisk and select the modules icon
4. Click "Install from storage"
5. Navigate to the downloaded folder and choose the zip inside.
6. Allow it to complete and then reboot.
Enjoy your center clock leave a thanks, let me know if it doesn't work, and I will try to help as much as I can.
Troubleshooting
------------------------------
Magisk module failure.
This works for any magisk module failure.
1. Power off your phone by holding the power button, then turn it back on.
2. As your phone gets to the bootloader warning screen, press and hold volume up and down and continue to hold until the phone shows the boot animation.
3. You'll boot to safe mode, simply reboot once more.
4. On the next boot all your magisk modules will be disabled, remove the problematic module, and re-enable the functional ones.
Original mod made by @Tulsadiver @dianoandr & @dladz for the op. I just pretty much copied and pasted his OP. So thanks for that
tested this module myself, absolutely massive thanks to them for this.
mine
mine as well
And the clock on the right is possible in the future?
maquina80 said:
And the clock on the right is possible in the future?
Click to expand...
Click to collapse
working on it....
Jed!Master said:
working on it....
Click to expand...
Click to collapse
Mention this: Only for OxygenOS to save users from SystemUI error
Tried. Works great! Thanks...
Small suggestions:
Can you reduce the padding from the top. Now the status bar occupies more space. Also can ss be included with hh:mm?
IAMAB said:
Tried. Works great! Thanks...
Small suggestions:
Can you reduce the padding from the top. Now the status bar occupies more space. Also can ss be included with hh:mm?
Click to expand...
Click to collapse
you talking about military hours with seconds on it!? I'll see what can be done as far as the padding goes...
Jed!Master said:
you talking about military hours with seconds on it!? I'll see what can be done as far as the padding goes...
Click to expand...
Click to collapse
Thanks mate.
Working great, thank you!
maquina80 said:
Click to expand...
Click to collapse
Done check it out. Enjoy
Can you please post change log?
IAMAB said:
Can you please post change log?
Click to expand...
Click to collapse
Bruh, someone else is doing the mod I'm just testing it to make sure it works. If there was a change log it would be up there til then flash if you like if not then I guess you won't flash it
Hello
Do you think it works on 11.0.6.8?
T.A.R.D.I.S. said:
Hello
Do you think it works on 11.0.6.8?
Click to expand...
Click to collapse
I'm not sure. But isn't the latest global 11.0.6.7? Correct me if I'm wrong
I tried the module on 11.0.6.7, looked like systemui kept crashing. Was able to disable the module.
-Michael_ said:
I tried the module on 11.0.6.7, looked like systemui kept crashing. Was able to disable the module.
Click to expand...
Click to collapse
And with 11.0.6.9, i've the same issue
-Michael_ said:
I tried the module on 11.0.6.7, looked like systemui kept crashing. Was able to disable the module.
Click to expand...
Click to collapse
Same with 11.0.6.8.KB05BA
Black screen after reboot.
@Jed!Master can you update this for the most recent version of oos?
Related
As a few days frustration and zillion tries are behind me let me explain proper instalation of this sound engine. Just to notice that you DON'T need permissive kernel for that because I installed it on my stock German ROM and now works in French Orange ROM G935FXXU1APBF as well !
INSTALLATION PROCEDURE ON CLEAN STOCK ROM :
At first...
You need to DELETE not to freeze sound alive and adapt sound.
In build.prop find the lines or add them as follows ;
Ipa.decode=false
tunnel.decode=false
lpa.use-stagefright=false.
.
1.You need to root your SM-G935F device with newest SuperSU by ChainFire located here.So, download and flash TWRP recovery from here and flash SuperSU.Wipe dalvik,wipe cache, then Restart your device.
2.From Playstore download and install latest STERICSON BUSYBOX. Install busybox in default su/xbin and give root permission.Restart your device again.
3. Download from official page Viper4android version 2.4.0.1 from HERE
4. Using Root explorer copy Viper4Android in folder PRIV-APP and give it permission 0644 rw-r--r-- (see attached image)
5.Restart your device
6. Open V4A and install driver when it asks...don't exit app or DON'T TOUCH anything else, just Restart your device.
7. Open V4A and go to Settings - UI Setting - Expert Mode
8. In some occasions V4A will ask for new driver installation...Install again and restart device.
9. Use your V4A wisely !
IMPORTAINT NOTIFICATION !
If you previously messed up with V4A or rooting,I recommend fresh ROM installation from scratch.
If V4A constantly offers to install driver, it means you did not properly rooted your device !
VIPER4ANDROID IS NOT WORKING ON STOCK PLAYER !
That's all.If you didn't read post carefuly, there is no any support else, because it is not needed.
Followed your guide, didn't ask to install a new driver after step 8 and viper is not working any suggestions?
Bernard23 said:
Followed your guide, didn't ask to install a new driver after step 8 and viper is not working any suggestions?
Click to expand...
Click to collapse
In some cases it doesn't ask for another driver installation after entering expert mode.Did you try another player?
If you don't used it on clean rom then it could be anything.
I've not needed to do half of this.
riso123 said:
I've not needed to do half of this.
Click to expand...
Click to collapse
How come ?
BusyBox Location is Su/xbin or System/xbin ?
JazonX said:
BusyBox Location is Su/xbin or System/xbin ?
Click to expand...
Click to collapse
Did you read thread ? I mentioned above that busybox is in /su/xbin/
tin2404 said:
Did you read thread ? I mentioned above that busybox is in /su/xbin/
Click to expand...
Click to collapse
I read and hence the question, because usually since MM - Busybox is installed to System/xbin by default.
Nevermind, Gonna try that as well now. Thanks!
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
barbik said:
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
Click to expand...
Click to collapse
dude that's zip work flawlessly :good:
tin2404 said:
How come ?
Click to expand...
Click to collapse
Because I simply download the latest APK and install it as a normal app rather than copy across and setting permissions.
I then download and flash the ZIP from the below site:
http://androiding.how/how-to-fix-viper4android-selinux-policy-issues-on-lollipop/
After that I installed the driver, rebooted and all was good.
I was the first\one of the first, to flash v4a on our device.
I've already created a tutorial thread for this in the guide section. People might find it easier, no need to make adjustments to build.prop for example, it's automatic.
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
Beefheart said:
I've already created a tutorial thread for this in the guide section. People might find it easier, no need to make adjustments to build.prop for example, it's automatic.
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
Click to expand...
Click to collapse
Exactly what I was thinking...
Beefheart said:
I've already created a tutorial thread for this in the guide section. People might find it easier, no need to make adjustments to build.prop for example, it's automatic.
http://forum.xda-developers.com/s7-edge/how-to/guide-viper4android-enforcing-stock-t3337148
Click to expand...
Click to collapse
Amazing recommendation on the flat icons xposed module. Loving the custom status bar icons [emoji106]
Sent from my SM-G935W8 using Tapatalk
barbik said:
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
Click to expand...
Click to collapse
Thank you so much for this barbik!
I've literally spent the best part of a day trying to get this to work. Followed various guides posted here but only your link applied V4A system wide rather than just for GoneMAD.
If anyone else is having issues, uninstall the driver and the app, reboot into twrp and flash this zip instead.
Thanks again you saved me a few grey hairs!
SirBarnz said:
Thank you so much for this barbik!
I've literally spent the best part of a day trying to get this to work. Followed various guides posted here but only your link applied V4A system wide rather than just for GoneMAD.
If anyone else is having issues, uninstall the driver and the app, reboot into twrp and flash this zip instead.
Thanks again you saved me a few grey hairs!
Click to expand...
Click to collapse
I agree, that zip helped me as well after a few failed attempts Now it works perfectly and Spotify sound amazing!
barbik said:
ViPER4Android_FX_A4_6.0.1_New.zip
set through TWRP checked S7 Edge 935FD
Click to expand...
Click to collapse
Hi, flashed, works! Super! Thanks. One question: what is that clock??? app inside zip for? Is it necessary? That's strange surprise... It's located in system/app/com.cyanogenmod.lockclock-1, please explain. Thank you.
N4 powered by Echoe™
FRM300 said:
Hi, flashed, works! Super! Thanks. One question: what is that clock??? app inside zip for? Is it necessary? That's strange surprise... It's located in system/app/com.cyanogenmod.lockclock-1, please explain. Thank you.
N4 powered by Echoe™
Click to expand...
Click to collapse
+1
What's that Clock APK ?
JazonX said:
+1
What's that Clock APK ?
Click to expand...
Click to collapse
his is a clock widget ... they are not needed, they can be removed
Mine works perfectly fine with just freezing those two Samsung apps...
Sent from my SM-G935F using Tapatalk
Nokia Extensions!Telegram Group
This thread is discontinued. Future posts will be made here.
Module description
Why should the Chinese have all the fun? This module aims at porting features from the Chinese variants of Nokia phones to Global variants (Android One).
Features
1. AI Floating Ball
The phone will recommend relevant application shortcut settings according to your usage. You can also:
Use the custom shortcuts to customize the shortcut menu.
Use gestures to enrich your interaction with the phone.
2. Data speed indicator
Tested and working on Nokia 6, Nokia 8 and Nokia 7 plus on Oreo. After installation, go to Settings - Network & Internet - Data Usage and toggle Show data speed. Now you should be able to see your internet speed on your status bar.
3. Screenshot Plus
Take long screenshots, edit them on the go.
4. Screen Recorder
Supports FHD, HD and SD at 30 and 60 FPS, records audio too.
5. Junk Cleaner
Clears cache and junk files.
6. Task Manager
View and end a running task.
7. Smart Boost
Enjoy gaming without frame drops and hiccups!
8.. Virus scanner
Scan for virus and keep your phone secure.
9. NokiaPure fonts
Change your system font to NokiaPure
How to's
To install the module, flash the zip using Magisk manager or TWRP and reboot.
To uninstall the module, flash the same zip again and reboot.
To get the internet speed on the status bar, go to Settings - Network & Internet - Data Usage and toggle Show data speed.
To use Screenshot plus and Screen Recorder, add them to Quick Settings.
To open AI Floating Touch, Smart boost, Task manager, Junk Cleaner and Virus scan use NEX Launcher.
Compatibility
Nokia Phones
Magisk 17+
Android 8.1.0 and above
Download from Magisk Manager.
Source code: Github[/SIZE]
Credits
@topjohnwu for Magisk
@ahrion & @Zackptg5 for Unity template and Volume Key Selector
FIH/Evenwell/HMD Global (whoever it is) for making these apps
Changelog
v1
Initial release
v1.1
Added more features - Screenshot plus, Screen Recorder, System dashboard
Added NokiaPure fonts
v1.2
Added smart boost
fixed some FCs
v1.3
Merged Pie and Oreo files into a single package
Users can now select only the files they want to install using volume keys
How to use these apps? I am unable to use the apks after downloading.
yagyanshskumar said:
How to use these apps? I am unable to use the apks after downloading.
Click to expand...
Click to collapse
The Title shows that it's a Magisk Module. Means that you need to be rooted using Magisk
Akilesh T said:
Nokia Extensions!
Module description
Why should the Chinese have all the fun?
Click to expand...
Click to collapse
Haha, great!
maybe is not working on nokia 6 with magisk root which have locked bootloader
frnsl3 said:
maybe is not working on nokia 6 with magisk root which have locked bootloader
Click to expand...
Click to collapse
I guess you are using Magisk 16.1
This module requires Magisk 17+
ZeroPointMax said:
Haha, great!
Click to expand...
Click to collapse
These features could have been added by Nokia mobile itself if they wanted to. But they decided to keep it only for China, going with "Pure stock" Android for the rest of the markets. You can say that it might reduce the speed of the updates, but China variants have been getting updates at almost the same speed as the global variants. It would have been great if they had gone with something like OOS.
Akilesh T said:
I guess you are using Magisk 16.1
This module requires Magisk 17+
Click to expand...
Click to collapse
yep so sad, able rooting but not maximum potential and soft brick too often if we modify the system
frnsl3 said:
yep so sad, able rooting but not maximum potential and soft brick too often if we modify the system
Click to expand...
Click to collapse
Magisk is systemless
Akilesh T said:
Magisk is systemless
Click to expand...
Click to collapse
not talking about magisk there, i tell you about rooting
Unable to install
I have nokia 8. When i try to install this module, it says that my decvice is pixel Xl and refuses to install. I think this is because i have installed daydream enabler module. Is there a way to bypass the device check and proceed with installing this module?
audiophile55 said:
I have nokia 8. When i try to install this module, it says that my decvice is pixel Xl and refuses to install. I think this is because i have installed daydream enabler module. Is there a way to bypass the device check and proceed with installing this module?
Click to expand...
Click to collapse
Looks like that module edited your build.prop
You can bypass it. Extract the zip. Remove the device check part in install_module function inside the config.sh file. Rezip it and flash again
Akilesh T said:
Looks like that module edited your build.prop
You can bypass it. Extract the zip. Remove the device check part in install_module function inside the config.sh file. Rezip it and flash again
Click to expand...
Click to collapse
Can you tell me exactly which lines to remove? I try removing few lines but getting the same error. I am a noob at this. BTW, i also tried deleting the entire config.sh file and still I get the same error.
EDIT: My bad. I kept flashing the original zip and not extracted zip. All good now.
audiophile55 said:
Can you tell me exactly which lines to remove? I try removing few lines but getting the same error. I am a noob at this. BTW, i also tried deleting the entire config.sh file and still I get the same error.
EDIT: My bad. I kept flashing the original zip and not extracted zip. All good now.
Click to expand...
Click to collapse
You mustn't delete config.sh file
:good:
does this module work with other android one phones? im using xiaomi a2 lite @ oreo 8.1
How can i use ai floating? . I cant find where to activate it
cbkottege said:
How can i use ai floating? . I cant find where to activate it
Click to expand...
Click to collapse
Search for "touch" in settings. There'll be a result like "Hide in do not disturb apps". That'll take you to the AI floating button' settings
Hi. I am using nokia 8. After installation module and restart, i get smart tuner and data speed indicator force close, how to fix it sir?
(Sorry for my bad english)
zeronatdo said:
Hi. I am using nokia 8. After installation module and restart, i get smart tuner and data speed indicator force close, how to fix it sir?
(Sorry for my bad english)
Click to expand...
Click to collapse
Are you using the latest version (v1.3)?
AT YOUR OWN RISK!!!
Requeriments:
- TWRP Recovery
- Xperia XZ2
- Sony stock Oreo firmware UP AND RUNNING
1 - Xposed Framework Fix:
1.1 - Download always the latest version of the fix available for your device/firmware (attached below)
1.2 - Reboot into Recovery (backup System partition, in case something goes wrong)
1.3 - Flash it
1.4 - Wipe Cache/Dalvik-Cache
1.5 - Reboot into System
2 - Xposed Framework Installation:
2.1 - Download official xposed-v90-sdk26-arm64-beta2.zip YEAH... BETA 2 (beta 3 also works, but I noticed random errors reported in logcat, not so often, but also some weird fcs)
2.2 - Reboot into Recovery
2.3 - Flash it
2.4 - Wipe Cache/Dalvik-Cache
2.5 - Reboot into System
2.6 - Install latest official Xposed Installer app (just in case)
What's Inside:
- Xposed Framework Installation Fix (patch)
- Super User Mod/Mode (patch)
Notes:
- This "fix" will only prepare your device to receive the official Xposed Framework, NOTHING ELSE
- Discussions/Questions about any specific xposed module DO NOT BELONG TO THIS THREAD
- If you get "Xposed is installed but not active" error message: Tap on the menu (3 points icon) in the action bar, and select "Quick restart" (grant it root permission if asked for)
FAQ:
- Will a specific xposed module work?
I DON'T KNOW
Special thanks:
- @rovo89 (Xposed Framework)
- @MartinX3 (TWRP Recovery and amazing support)
- @M-Rom (Original patch)
- @Klaus N. (XZ2 Testings)
Enjoy it!
Screenshots and Guide
Guide:
I NEED SOME SPARE TIME FOR THIS!
Changelog
v1.0 - 03/Jan/2019
- XZ2 H8216 (Customized CE1 51.1.A.11.51)
Awesome !!
testing it right now...
I can confirm, it works flawlessly, even with the latest Oreo firmwares! As recommended, I use the beta 2 of Xposed.
Sera, thanks a lot for sharing with us - another great job
What do I do if I have my Xz2 compact rooted with magisk?
Yoannjap said:
What do I do if I have my Xz2 compact rooted with magisk?
Click to expand...
Click to collapse
If you're on latest Oreo fw (.51) and have twrp recovery installed, just follow the instructions. And If so, please report back here later.
I'm planning to create a systemless version with a magisk module, so we don't need twrp to get it working. Stay tunned!
Edit: This ^^ does not seem like a good idea due to the startup queue of the magisk modules, but I'll check this out anyways when I have some spare time! Do not stay so tunned
Thanks Serajr. I'll try it in a few hours and report if it succeeds
serajr said:
If you're on latest Oreo fw (.51) and have twrp recovery installed, just follow the instructions. And If so, please report back here later.
I'm planning to create a systemless version with a magisk module, so we don't need twrp to get it working. Stay tunned!
Edit: This ^^ does not seem like a good idea due to the startup queue of the magisk modules, but I'll check this out anyways when I have some spare time! Do not stay so tunned
Click to expand...
Click to collapse
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Will this help you to get rid of my poor, little TWRP? :crying:
MartinX3 said:
https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Will this help you to get rid of my poor, little TWRP? :crying:
Click to expand...
Click to collapse
Thanks bro... but no, it won't (unfortunately). It'd be in case the fix won't be necessary.
The fix itself must be present in the system way before magisk starts to do its bind mount task, otherwise system won't boot (in case user installs xposed framework magisk module).
The best thing to do in this case is staying with your excellent TWRP, and simply flash the zip
serajr said:
And If so, please report back here later.
Click to expand...
Click to collapse
Confirmed working for xz2c. Haven't had time to set up modules (need to go to birthday party now) after downgrade to Oreo. But flashing the Fix/framework went through without problems.
old.splatterhand said:
Confirmed working for xz2c. Haven't had time to set up modules (need to go to birthday party now) after downgrade to Oreo. But flashing the Fix/framework went through without problems.
Click to expand...
Click to collapse
Thanks for your feedback! :good:
Modules may indeed cause issues, so take care on which ones you install. Xposed log always shows us what's going on.
Most recent versions of FB Messenger app crashes due to conflicts with Xposed Framework. It has been reported on XDA.
This can be temporarily fixed using the october 27 version of Messenger: download here
Use this version (this is the latest working version) and do not update it (disable its autoupdate in the app and in Play Store app)
lol... master serajr I was waiting for your reply in private and missed this thread!
so wonderful I enabled now xposed also in my xz2c thanks to your fix, you are the man I love you!
now the phone is perfect... I have date in status bar, dt2s in lock screen, actions for navbar buttons, separate volumes, skip tracks etc etc etc
my friend you made my week!! :laugh::victory::highfive:
EDIT: someone would know how to make a xposed module to make the quicksettings panel white? (like oreo stock and better matching white settings app for example )
nreuge said:
Most recent versions of FB Messenger app crashes due to conflicts with Xposed Framework
Click to expand...
Click to collapse
Really? How can I reproduce that here?
I don't use FB, but for testings purposes I installed both FB and FB Messenger from Google Play (latest versions) and got no errors/crashes/fc (my wife logged in the apps). Ofc I don't have any FB related xposed module installed.
FcukBloat said:
lol... master serajr I was waiting for your reply in private and missed this thread!
so wonderful I enabled now xposed also in my xz2c thanks to your fix, you are the man I love you!
now the phone is perfect... I have date in status bar, dt2s in lock screen, actions for navbar buttons, separate volumes, skip tracks etc etc etc
my friend you made my week!! :laugh::victory::highfive:
EDIT: someone would know how to make a xposed module to make the quicksettings panel white? (like oreo stock and better matching white settings app for example )
Click to expand...
Click to collapse
Glad to know you enjoyed it :good:
Regarding white System UI theme, I created a magisk module instead of xposed one (attached below):
serajr said:
Glad to know you enjoyed it :good:
Regarding white System UI theme, I created a magisk module instead of xposed one (attached below):
Click to expand...
Click to collapse
you are simply the best mate! :victory: much better now!
just sent you a small donation you deserve it hope it will be enough for a couple of caipirinhas! :highfive:
FcukBloat said:
you are simply the best mate! :victory: much better now!
just sent you a small donation you deserve it hope it will be enough for a couple of caipirinhas! :highfive:
Click to expand...
Click to collapse
Thank you for the kindness bro! Time to get drunk then
serajr said:
Glad to know you enjoyed it :good:
Regarding white System UI theme, I created a magisk module instead of xposed one (attached below):
Click to expand...
Click to collapse
Can't you also create something that activates the complete dark ui...? ?
Yes if you create a complete dark UI (for notifications of apps and parameters, you would be the best)!
Dreaming***
Tools needed: boot.img extractor. I recommend the one created by osm0sis from this thread:
https://forum.xda-developers.com/showthread.php?t=2073775
The first method was developed by osm0sis and removes magisk and all modules.
1. Unpack magisk_patched.img
2. Unzip overlay.dremove1.zip and place overlay.d folder in ramdisk folder.
3. Repack IMG
4. fastboot boot image-new.img created by repacking img
This method is an offshoot of osm0sis version but boots core-only mode. Afterwards, remove the .disable-magisk file from the /cache folder for modules to work. Dot files are hidden files so if your root explorer can't see hidden files, run the "Remove disable_magisk" bat file in ADB.
1. Same as above but use the overlay.dcoreonly1.zip
For both methods you must be rooted for it to work. These are not cure all's for all bootloops.
Remove .disable_magisk bat file
https://www.androidfilehost.com/?fid=4349826312261684994
Here is a fastboot bootable image to boot you into Magisk core-only mode, in case you bootloop due to flashing a bad module, in fastboot:
fastboot boot image-newpixel4xl.img
You will boot with root but modules disabled. After you remove the offending module you will need to go to /cache folder and delete the .disable_magisk file before your modules will work.
fastboot boot image-newpixel4xlRemove.img
This one should remove magisk and all modules, then reboot and magisk should reinstall itself (ask to install necessary binaries). This is what osm0sis uses to recover from failed flashes. See this post:
https://forum.xda-developers.com/pi...odules-disabler-booting-magisk-t3976625/page2
Images are in this common folder. Pick the appropriate image for your phone.
6-4-20
https://www.androidfilehost.com/?w=files&flid=313291
Awesome, since we may not have TWRP this is extremely valuable.
Thanks for this, I was able to boot back into the OS. However, I had to do a complete uninstall of magisk to get rid of the bootloop.
Thanks again, saved me a wipe
burmjohn said:
Thanks for this, I was able to boot back into the OS. However, I had to do a complete uninstall of magisk to get rid of the bootloop.
Thanks again, saved me a wipe
Click to expand...
Click to collapse
You're welcome. I've had to do a complete uninstall myself on several occasions.
Tulsadiver said:
You're welcome. I've had to do a complete uninstall myself on several occasions.
Click to expand...
Click to collapse
What was causing the issue for you? I tried to install exposed and thats when things went south
burmjohn said:
What was causing the issue for you? I tried to install exposed and thats when things went south
Click to expand...
Click to collapse
Mine have to do with my mods when I try new things, so usually SystemUIGoogle.apk. I've found that just deleting the apk itself from the modules and leaving the folders in place works best.
Tulsadiver said:
Mine have to do with my mods when I try new things, so usually SystemUIGoogle.apk. I've found that just deleting the apk itself from the modules and leaving the folders in place works best.
Click to expand...
Click to collapse
I am very grateful that you put this together because I tried xposed and it didn't work and I was in an endless boot and I was able to grab this image and I came up right away. I don't know whether I'll try doing it again or not. I sure would like gravity box on the 4XL.
madscribblerz said:
I am very grateful that you put this together because I tried xposed and it didn't work and I was in an endless boot and I was able to grab this image and I came up right away. I don't know whether I'll try doing it again or not. I sure would like gravity box on the 4XL.
Click to expand...
Click to collapse
What kind of mods are you looking for?
Tulsadiver said:
What kind of mods are you looking for?
Click to expand...
Click to collapse
I would like to be able to modify the quick settings to take away the text and allow the number of columns and rows to be set.
I'd like long press on volume to switch tracks.
I'd like to relocate my clock to center.
Have it say <smallcaps>Fri Oct 25</smallcaps> 4:35 <smallcaps>pm</smallcaps>
Control brightness with the status bar
Add more items to the power off menu (bootloader)
Expandable volume menu.
Has anyone been successful with exposed yet?
Sent from my Pixel 4 XL using Tapatalk
madscribblerz said:
I would like to be able to modify the quick settings to take away the text and allow the number of columns and rows to be set.
I'd like long press on volume to switch tracks.
I'd like to relocate my clock to center.
Have it say <smallcaps>Fri Oct 25</smallcaps> 4:35 <smallcaps>pm</smallcaps>
Control brightness with the status bar
Add more items to the power off menu (bootloader)
Expandable volume menu.
Click to expand...
Click to collapse
I can do a few of those...
Tulsadiver said:
I can do a few of those...
Click to expand...
Click to collapse
I would like that very much. I'd much rather not use xposed. Every time I have it has been a little flaky. Do know though that I tried the center clock mod you already made and it wasn't working for me.
Perhaps because I'm on the .C4 release or because I'm using Nova?
madscribblerz said:
I would like that very much. I'd much rather not use xposed. Every time I have it has been a little flaky. Do know though that I tried the center clock mod you already made and it wasn't working for me.
Perhaps because I'm on the .C4 release or because I'm using Nova?
Click to expand...
Click to collapse
If it isn't working it's probably because of a module you have installed. I know it works.
Tulsadiver said:
If it isn't working it's probably because of a module you have installed. I know it works.
Click to expand...
Click to collapse
These are the modules that I have installed, are there any that look suspect? I'll try it again just to see if it was something on my side earlier.
Tulsadiver said:
If it isn't working it's probably because of a module you have installed. I know it works.
Click to expand...
Click to collapse
I did some more troubleshooting and the clock mod does work now. But only sort of. It doesn't work with Nova set as the default launcher and gesture navigation. It disabled the home action as far as I can tell.
---------- Post added at 02:56 PM ---------- Previous post was at 02:17 PM ----------
Tulsadiver said:
If it isn't working it's probably because of a module you have installed. I know it works.
Click to expand...
Click to collapse
okay I think I figured it out. It had to do with the navigation gestures hiding the nav bars. Unless it's set to full Iimmersive mode then it somehow conflicts with the gestures and the launcher. Oddly this only happens with the clock mode enabled and not when it's not.
madscribblerz said:
okay I think I figured it out. It had to do with the navigation gestures hiding the nav bars. Unless it's set to full Iimmersive mode then it somehow conflicts with the gestures and the launcher. Oddly this only happens with the clock mode enabled and not when it's not.
Click to expand...
Click to collapse
You should get fluid NG. Much better gestures.
Tulsadiver said:
You should get fluid NG. Much better gestures.
Click to expand...
Click to collapse
okay. I just changed the navigation bar to be visible since it's so unobtrusive in the gesture nav.
I also set up per app immersive, which more than makes up for the lost real estate.
Thanks for helping me sort it out,and even more so for the work you do on the mods. I've had a pixel since they came out, and I really like the stuff you did for my 2 xl and 3 xl.
Look forward to 2hat you do for the 4 xl ?.
madscribblerz said:
okay. I just changed the navigation bar to be visible since it's so unobtrusive in the gesture nav.
I also set up per app immersive, which more than makes up for the lost real estate.
Thanks for helping me sort it out,and even more so for the work you do on the mods. I've had a pixel since they came out, and I really like the stuff you did for my 2 xl and 3 xl.
Look forward to 2hat you do for the 4 xl .
Click to expand...
Click to collapse
I'm glad you got it to work!
Tulsadiver said:
I'm glad you got it to work!
Click to expand...
Click to collapse
Also single app immersive makes it so the nav bar doesn't show in an immerse app anyway.
Dude this tool saved my ass today. Thanks man.
Hi,
with pleasure I share the module for center/right clock in the status bar, the module is created by @Tulsadiver, tested by me on Oneplus 7 Pro with firmware version as specified file name.
ESSENTIAL PREREQUISITE: BEFORE INSTALLING THE MOD, IT IS NECESSARY TO INSTALL, IF NOT PRESENT, THE "OVERLAY MOUNT FIX" MODULE BY @Zackptg5 DOWNLOADABLE FROM MAGISK MANAGER, WITHOUT THIS THE CLOCK MODULE WILL NOT WORK!
It is a magisk module and I want to repeat that it can only be used on Oneplus 7 Pro.
The module can only be used with the firmware release indicated in the file name, it will be my commitment to update the thread with the release of future updates.
I'm trying it and it doesn't seem to show any problems but I still recommend making a backup before trying it.
To remove the mod, simply uninstall the module using magisk manager or, if this is not usable, from recovery twrp, using the file manager deleting the module "OP7_VrThemer_OPSystemUI" that you find at the following path:
/data/adb/modules
Update: How to remove the module in case of failure (procedure valid for any magisk module):
Turn off the phone by pressing and holding the power button for a few seconds.
Turn the phone back on.
After the "Bootloader Unlocked" warning appears, press and hold down the "Volume up" and "Volume down" keys at the same time, until the startup animation appears.
The phone will boot correctly but will be operating in "Safe mode".
Now restart your phone normally.
The phone will boot in standard operating mode but with all magisk modules disabled.
Remove the magisk module that caused the problem and enable your other modules and reboot one last time.
The phone operating as if nothing had happened
My biggest, massive, THANKS go to @Tulsadiver, for sending me his xml file with the modifications necessary to obtain the movement of the clock and for passing me Its VRThemer module, without your help I could not have avoided the bootloop ... I can say that the mod is all from @Tulsadiver, the mod is all the result of his work and his expertise, I have only been a tester and shared his fantastic work with you.
Thanks also to @dladz, for giving me his support and advice!
Attention each module you find in this post is specific to the firmware indicated in the file name, with each new firmware it will be my concern to release the new updated module.
Flashing always at your own risk!!!
To be installed only with Magisk Manager, if installed by TWRP it does not work.
Please read all indications before proceeding with the installation, module has been tested and is working on the OxygenOS 10 and OxygenOS 11 based firmware, NOT tested with other firmware and non-OxygenOS based roms.
P.S. To complete the information, I have not had the opportunity to try the same module with other firmware versions, it could work but I have no way of knowing, if you decide to try remember that it should only be used on Oneplus 7 Pro with firmware OxygenOS 10 and OxygenOS 11 and that you do at your own risk. I test the module with the firmware specified in the file name before publishing it, if it is here for you it means that it has not given me any problems.
Flashing always at your own risk!!!
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
a63548 said:
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
Click to expand...
Click to collapse
Check your pm
You should post the right clock as well
Just a humble request, can you create a telegram group to support and test your module, it will be faster
a63548 said:
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
Click to expand...
Click to collapse
mholloway said:
You should post the right clock as well
Click to expand...
Click to collapse
work in progress...stay tuned
Added to the first post mod for right clock and updated the module for center clock (if you want to update remove the old release, restart and install the new one).
I await your feedback.
Thanks to @Tulsadiver for his patience in supporting me and for his great availability!
New update of the "center clock" module, fixed clock displayed in the lockscreen defect, I recommend removing those installed up to now and replace with the latter released
Thanks for the mod. I tried the right clock mod but it did not work. Just to be fair, I tried on stable OS 10.3.5 and NOT on beta OS. Mod installed w/o any errors and I can see this mod installed in the Magisk Manager but clock is still on the left side. Rebooted twice, still no go. May be the beta 18 OS is the only OS that support this module. Keep up the good work. Thanks.
Gr8man001 said:
Thanks for the mod. I tried the right clock mod but it did not work. Just to be fair, I tried on stable OS 10.3.5 and NOT on beta OS. Mod installed w/o any errors and I can see this mod installed in the Magisk Manager but clock is still on the left side. Rebooted twice, still no go. May be the beta 18 OS is the only OS that support this module. Keep up the good work. Thanks.
Click to expand...
Click to collapse
Sorry my mistake, try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
The overlay mount fix module is necessary for the mod to work and I forgot to write it, sorry.
I await feedback
Installed right clock on beta 18,not working.
Magisk 20.04
Magisk manager 8.0.2
mholloway said:
Installed right clock on beta 18,not working.
Magisk 20.04
Magisk manager 8.0.2
Click to expand...
Click to collapse
Try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
I await feedback
dianoandr said:
Try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
Click to expand...
Click to collapse
That worked
mholloway said:
That worked
Click to expand...
Click to collapse
My mistake, sorry to you and everyone, I have the "overlay mount fix" module installed by default in my phone and I have not taken into account that it is necessary for the module to work...sorry again
dianoandr said:
Sorry my mistake, try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
The overlay mount fix module is necessary for the mod to work and I forgot to write it, sorry.
I await feedback
Click to expand...
Click to collapse
I know it worked for someone else but it really messed up my phone. Phone boots fine but screen is dark i.e. no display anymore. I am on OS 10.3.5 and the current Magisk 20.4. I'll use the fast boot zip when I get home to bring the phone back to life. Thanks!
Gr8man001 said:
I know it worked for someone else but it really messed up my phone. Phone boots fine but screen is dark i.e. no display anymore. I am on OS 10.3.5 and the current Magisk 20.4. I'll use the fast boot zip when I get home to bring the phone back to life. Thanks!
Click to expand...
Click to collapse
Go to recovery, with the integrated file manager function, delete the module "OP7_VrThemer_OPSystemUI" that you find at the following path: /data/adb/modules and reboot
dianoandr said:
Go to recovery, with the integrated file manager function, delete the module "OP7_VrThemer_OPSystemUI" that you find at the following path: /data/adb/modules and reboot
Click to expand...
Click to collapse
That did the trick. Thanks for your help. My phone came back to life and working fine
So, is it safe to say that right side clock module only work with OS 18 beta and not the latest stable OS 10.3.5?
Thanks again for your help.
Gr8man001 said:
That did the trick. Thanks for your help. My phone came back to life and working fine
So, is it safe to say that right side clock module only work with OS 18 beta and not the latest stable OS 10.3.5?
Thanks again for your help.
Click to expand...
Click to collapse
Happy it's back to normal, it's a trick to keep in mind for emergency situations.
The change itself is the same for all versions of oxygenos based on android 10, it probably changes something else in the apk and as a consequence the .xml file compiled with the mod, crashes your opsystemui.
I sent you a p.m.
I can confirm that mod works fine on Beta 19 as well? Thanks
Gr8man001 said:
I can confirm that mod works fine on Beta 19 as well Thanks
Click to expand...
Click to collapse
Great news, however as soon as I update my phone, I check that there are no major changes related to the apk and eventually update the modules to avoid instability.