Database Info

[MAGISK] Andromeda Enabler - Enable Andromeda ON DEVICE With a Command!

Hello, folks! I've written a Magisk Module which includes a modified version of the Linux activation script for Andromeda, allowing you to enable Andromeda with a single command (two, if you count su)! I was inspired by the OTHER local Andromeda enabler script here on XDA, as I had downloaded it but discovered that it only worked intermittently on my device. Now, I know, you may be thinking to yourself "OP, is there something wrong with you? Andromeda exists so you DON'T have to be rooted!" Yes, this is true. However, from what I've gathered, there is a speed boost from using Andromeda, and that alone makes this worth it for me, and hopefully others. Plus, I was bored and wanted to see if I could make it work.
This module is written to work with Magisk v15. It will NOT work on Magisk v14, however, it is a single binary, so you could very easily extract it and place it on your phone or make a v14 module yourself.
To activate Andromeda, all you have to do is install this module, reboot, launch a Terminal Emulator, and type:
Code:
su
andromeda
Substratum should launch with Andromeda permissions, as if you'd used the Desktop Application.
@saccentekennedy has made an app! Flash the module, install his app, and when you launch his app, it will grant Andromeda permissions! No commands needed! Be sure to thank his post!
https://forum.xda-developers.com/ap...ndromeda-enabler-enable-t3728325/post75053802
UPDATE 1/12/2018 - The script did not properly set SELinux back to Enforcing, this is now fixed. Please update! Thanks to @Floydfire for the heads up

Works perfectly!

I've created a Tasker task to run this... But I can't figure out how to trigger it. In other words, how can I get Tasker to detect that the Andromeda isn't properly running and connected? I know I get a notification when the service goes down. I suppose I could use this as a trigger? Any thoughts?

saccentekennedy said:
I've created a Tasker task to run this... But I can't figure out how to trigger it. In other words, how can I get Tasker to detect that the Andromeda isn't properly running and connected? I know I get a notification when the service goes down. I suppose I could use this as a trigger? Any thoughts?
Click to expand...
Click to collapse
You could potentially use AutoNotifications with Tasker to detect the notification but I'd probably just set the trigger to the device booting or being unlocked, or make a widget with an app, like SManager, so you can just tap it.

I created a little app with Tasker. It works. I've used Tasker plenty but never created an app. Anyway, I don't know if this will work for anyone else, but this works for me at least
You need the Magisk module installed, BTW.

saccentekennedy said:
I created a little app with Tasker. It works. I've used Tasker plenty but never created an app. Anyway, I don't know if this will work for anyone else, but this works for me at least
You need the Magisk module installed, BTW.
Click to expand...
Click to collapse
Works fine for me. I'm gonna link this in the OP, if that's okay with you. What's the code that went into it? Just executes 'andromeda' when you launch it?

PokemonTotalWar said:
Works fine for me. I'm gonna link this in the OP, if that's okay with you. What's the code that went into it? Just executes 'andromeda' when you launch it?
Click to expand...
Click to collapse
Yup! My first app. Lol.

So congrats this is very interesting!
I'm curious, though.. I'm rooted and I've got substratum and magisk 15.x installed (current version). I purchased and installed Andromeda. I downloaded and installed y'alls zip and the apk. Is there a way to check that it's working properly? What I do have is the module in magisk is enabled but the actual Andromeda app keeps closing when I tap it (wasn't sure if it was even supposed to be opened or if it was a background app)

lido said:
So congrats this is very interesting!
I'm curious, though.. I'm rooted and I've got substratum and magisk 15.x installed (current version). I purchased and installed Andromeda. I downloaded and installed y'alls zip and the apk. Is there a way to check that it's working properly? What I do have is the module in magisk is enabled but the actual Andromeda app keeps closing when I tap it (wasn't sure if it was even supposed to be opened or if it was a background app)
Click to expand...
Click to collapse
When you launch it, Andromeda mode should be activated and you can just launch Substratum. You can check if Andromeda mode is on by checking under the Substratum settings. Under System Certification it should say Andromeda mode (Certified). Substratum should also launch after you launch the Andromeda app included here
Sent from my OnePlus 5 using XDA Labs

Ah well sadly it's not activating for me....
I will keep my eye on this though!

lido said:
Ah well sadly it's not activating for me....
I will keep my eye on this though!
Click to expand...
Click to collapse
Have you tried running the commands in the terminal? It might be that the app just isn't working for you for some reason
Sent from my OnePlus 5 using XDA Labs

Yes the terminal emulator works. I was just hoping the app would work to survive a reboot (which I do frequently) I'm just lazy!

lido said:
Yes the terminal emulator works. I was just hoping the app would work to survive a reboot (which I do frequently) I'm just lazy!
Click to expand...
Click to collapse
Do you own Tasker? If you do, I actually made a profile to enable Andromeda whenever I launch Substratum, and I'll upload it if anyone is interested. I don't know how to make an application-triggered task into an app, though.
Sent from my OnePlus 5 using XDA Labs

I have noticed that I can't seem to use this module alongside anything else that also adds to /system/xbin (specifically "Busybox for Android NDK" by osm0sis). Only one seems to stick. I don't know if that's just a side effect of the way magisk works or an issue with one of the scripts. Could anyone provide any insight into this issue?

qwer777 said:
I have noticed that I can't seem to use this module alongside anything else that also adds to /system/xbin (specifically "Busybox for Android NDK" by osm0sis). Only one seems to stick. I don't know if that's just a side effect of the way magisk works or an issue with one of the scripts. Could anyone provide any insight into this issue?
Click to expand...
Click to collapse
I honestly have no idea, mine works
Sent from my OnePlus 5 using XDA Labs

qwer777 said:
I have noticed that I can't seem to use this module alongside anything else that also adds to /system/xbin (specifically "Busybox for Android NDK" by osm0sis). Only one seems to stick. I don't know if that's just a side effect of the way magisk works or an issue with one of the scripts. Could anyone provide any insight into this issue?
Click to expand...
Click to collapse
I honestly have no idea, mine works fine and I have both enabled. What's your Magisk version and other modules?
Sent from my OnePlus 5 using XDA Labs

PokemonTotalWar said:
I honestly have no idea, mine works fine and I have both enabled. What's your Magisk version and other modules?
Click to expand...
Click to collapse
Magisk Version: 15.2
Device: Pixel 2 XL (Taimen)
Modules:

qwer777 said:
Magisk Version: 15.2
Device: Pixel 2 XL (Taimen)
Modules:
Click to expand...
Click to collapse
I honestly have no idea. It might just be a quirk of the Pixels or something. I have no idea how to fix it. I'll look into it a little to see if something obvious is happening and I'm missing it, but no problems. Can you share your Magisk Log?
Sent from my OnePlus 5 using XDA Labs

Ran this script. Rebooted. My navbar disappeared and all icons went square with no option to change icons back to circle. Pixel 2. Magisk with factory Jan. 8.1. I'm not sure what could have caused this. I had to edit my build.prop to get the softkeys back. I guess no more OTAs for me. Anyone know how to get circle icons back?

btreu1 said:
Ran this script. Rebooted. My navbar disappeared and all icons went square with no option to change icons back to circle. Pixel 2. Magisk with factory Jan. 8.1. I'm not sure what could have caused this. I had to edit my build.prop to get the softkeys back. I guess no more OTAs for me. Anyone know how to get circle icons back?
Click to expand...
Click to collapse
I don't know what would have caused this issue, this script only enables Andromeda, nothing more. Did you do anything in Substratum before rebooting?
Sent from my OnePlus 5 using XDA Labs

Old Style Navigation keys

I am wondering if anyone knows or heard of anyway that the gesture navigation can be turned off and use the old style navigation keys instead? I know Google wants us to use the new gesture navigation and cant for the life of me understand why they are taking a stand with this and leave an option to turn off that ugly notch in the XL model?? I am wondering if the old "adding this line to the build prop will work" qemu.hw.mainkeys=0...this is assuming of course that we can root and Magisk will work with the new Titan security.

Great question! I will also be very interested in switching back to traditional navigation keys. The gestures just don't flow well. Why swipe right to go switch to the last app, but then you can't swipe left to go back, you have to tap. You swipe up to access the app switcher, but tap the pill to go home. Google, either use swipes or use taps, NOT BOTH!!!

You have to download Pixel launcher from Piixel 2

Shouldn't there be an ADB command for this?
Edit: Try this ADB command at your own risk:
"adb shell settings put secure swipe_up_to_switch_apps_enabled 0"
To reverse it try:
"adb shell settings put secure swipe_up_to_switch_apps_enabled 1"

Once we get root I am hoping for a way to get the old style nav bars back this new stuff is for the birds,,,I dont like it at all.

t2jbird said:
Shouldn't there be an ADB command for this?
Edit: Try this ADB command at your own risk:
"adb shell settings put secure swipe_up_to_switch_apps_enabled 0"
To reverse it try:
"adb shell settings put secure swipe_up_to_switch_apps_enabled 1"
Click to expand...
Click to collapse
I gave this a try, but sadly it did not work. No error messages or anything, just no changes either.

Try deleting nexuslauncherprebuilt on rooted phone. And install third party pixel launcher. But don't yell at me if anything goes wrong.
Edit: when the device is root-able. I managed to revert back to oreo recent and traditional navbar on Android pie custom room for Nexus 5x, by simply deleting nexuslauncherprebuilt.

Lets hope that it is this easy. I doubt it will be though.
Aman301582 said:
Try deleting nexuslauncherprebuilt on rooted phone. And install third party pixel launcher. But don't yell at me if anything goes wrong.
Edit: when the device is root-able. I managed to revert back to oreo recent and traditional navbar on Android pie custom room for Nexus 5x, by simply deleting nexuslauncherprebuilt.
Click to expand...
Click to collapse

Once we get root, I'm sure apps like custom navbar will bring back the old style. It already works in Android pie.

PuffDaddy_d said:
Once we get root, I'm sure apps like custom navbar will bring back the old style. It already works in Android pie.
Click to expand...
Click to collapse
Root shouldn't take too long. Mr. Magisk man has already achieved it on his P3 :good:

This was just posted on the front page:
https://www.xda-developers.com/disable-android-pie-gestures-google-pixel-3/

This is awesome thank you brother! Just did it now I have my nav bar back! Just need root to get my Substratum themes to work. I know the Magisk dev is working on it and I have no doubt he will get it for us soon.
cambunch said:
This was just posted on the front page:
https://www.xda-developers.com/disable-android-pie-gestures-google-pixel-3/
Click to expand...
Click to collapse

Badger50 said:
Root shouldn't take too long. Mr. Magisk man has already achieved it on his P3 :good:
Click to expand...
Click to collapse
He got the 3XL.

Archangel said:
This is awesome thank you brother! Just did it now I have my nav bar back! Just need root to get my Substratum themes to work. I know the Magisk dev is working on it and I have no doubt he will get it for us soon.
Click to expand...
Click to collapse
I thought Substratum didn't work on Android 9

PuffDaddy_d said:
I thought Substratum didn't work on Android 9
Click to expand...
Click to collapse
Sure it does. You just need root and a good theme

I think most people believe that because the way in which you apply the overlays are different. As long as you have a rooted phone and a Substratum theme that supports Android Pie you can use Substratum. There is just two more steps in the usual process after you build and enable the overlays. After you apply overlays, you just need to reboot your device and then go back into substratum and go to manager and enable the overlays you just built.
PuffDaddy_d said:
I thought Substratum didn't work on Android 9
Click to expand...
Click to collapse

looking for a good theme for status bar

Just looking for a good theme where i can change the status bar and change clock settings and mobile data settings if on status bar etc
Any suggestions?
Cheers

avid_droid said:
Use substratum.
There is kclock for clock and fonts
There is gravija and dark material OOS for signal Icons
These are substratum modules
Click to expand...
Click to collapse
Thanks
Does it work on Android 10?
Take it that download substratum from play store and then download themes and install them via substratum app?

avid_droid said:
Yes. Must be rooted
Click to expand...
Click to collapse
Yes rooted
Looking at play store now for some

funkyirishman said:
Yes rooted
Looking at play store now for some
Click to expand...
Click to collapse
Also, pretty sure you should use Substratum Lite with Android 10. I was having a few issues with the original Substratum on 10

avid_droid said:
Substratum works perfectly fine. App has been updated for 10 for a while now
Click to expand...
Click to collapse
So Substratum from the play store works on android 10 don't need lite or beta app?
So what's best theme to add date in status bar and show data connections
Mentioned in first reply some these on the play store?

Any themes that can add the date in the status bar?

did not work,substratum never works
---------- Post added at 09:51 AM ---------- Previous post was at 09:49 AM ----------
if you like themes install miui rom and enjoy,only auto rotate and fingerprint do not work

funkyirishman said:
Any themes that can add the date in the status bar?
Click to expand...
Click to collapse
K-Klock. I use xXx no limits magisk rom that has an option to install it. Works great for centering, adding date, changing font. Bunch of stuff you can do with it. You do need to open the app first and configure your settings, build the apk within K Manager then open substratum and install.
If you are not aware, I always get the best results by building and installing, reboot, then enable.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
ayhanaykut said:
did not work,substratum never works
---------- Post added at 09:51 AM ---------- Previous post was at 09:49 AM ----------
if you like themes install miui rom and enjoy,only auto rotate and fingerprint do not work
Click to expand...
Click to collapse
I've been using substratum for a while now and it always works. You must be doing something wrong to get it working.

GeekMcLeod said:
K-Klock. I use xXx no limits magisk rom that has an option to install it. Works great for centering, adding date, changing font. Bunch of stuff you can do with it. You do need to open the app first and configure your settings, build the apk within K Manager then open substratum and install.
If you are not aware, I always get the best results by building and installing, reboot, then enable.
Click to expand...
Click to collapse
Thanks
Are you talking about the below
https://play.google.com/store/apps/details?id=kpchuck.k_klock
I have xxxnolimits installed but can't find any module in magisk or am I looking in the wrong place?

funkyirishman said:
Thanks
Are you talking about the below
https://play.google.com/store/apps/details?id=kpchuck.k_klock
I have xxxnolimits installed but can't find any module in magisk or am I looking in the wrong place?
Click to expand...
Click to collapse
Looks right. I just had it installed with the xXx-nolimits profile.

Xposed and gravitybox is all you need and is the most reliable, fool proof method to get what you are requesting for clock, date, clock format, and clock locations. Plus I'm sure you will find other options useful as well. I use it for the clock, lock screen shortcuts, and to remove that god awe full blur that OP implemented on Android 10's lock screen music background art.

mookiexl said:
Xposed and gravitybox is all you need and is the most reliable, fool proof method to get what you are requesting for clock, date, clock format, and clock locations. Plus I'm sure you will find other options useful as well. I use it for the clock, lock screen shortcuts, and to remove that god awe full blur that OP implemented on Android 10's lock screen music background art.
Click to expand...
Click to collapse
Where can I get these
Tried themes using substratum but no good

funkyirishman said:
Where can I get these
Tried themes using substratum but no good
Click to expand...
Click to collapse
GravityBox
This is the version of EdXposed I use without issues.
Just curious, but what was wrong with K-klock?

GeekMcLeod said:
GravityBox
This is the version of EdXposed I use without issues.
Just curious, but what was wrong with K-klock?
Click to expand...
Click to collapse
Thanks will have a look at Gravity box. Is it beta version that works?
What exactly does Ed posed do and do I flash them via Magisk.
Tried Kclock and loaded it up via substratum. Then tried simple thing like put clock in status bar in the middle and no joy. Also no option to have date on status bar. Unless I'm missing something?

funkyirishman said:
Thanks will have a look at Gravity box. Is it beta version that works?
What exactly does Ed posed do and do I flash them via Magisk.
Tried Kclock and loaded it up via substratum. Then tried simple thing like put clock in status bar in the middle and no joy. Also no option to have date on status bar. Unless I'm missing something?
Click to expand...
Click to collapse
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.

GeekMcLeod said:
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
Click to expand...
Click to collapse
TaiChi Xposed is also an option and actually better in my opinion because you can activate and deactivate modules on the fly.

GeekMcLeod said:
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
Click to expand...
Click to collapse
These are the files that I have
GravityBox_Q_10.0.0-beta-5.apk
magisk-EdXposed-YAHFA-v0.4.6.0_beta.4471.-release.zip
magisk-riru-core-v19.5.zip
EdXposedManager-org.meowcat.edxposed.manager-4.5.2-452-release.apk
These are the right files to install as per the below.
Zip files installed via Magisk but don't reboot after each one
Installation
This procedure assumes you have working Magisk installation.
1) Install Riru and EdXposed modules using Magisk Manager
2) Install EdXposed Manager app
3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
4) Install GravityBox and enable it in EdXposed Manager
5) Reboot

[CLOSED](MOD) Center/Right Clock Magisk Module - OnePlus 7 Pro with OxygenOS firmware

Hi,
with pleasure I share the module for center/right clock in the status bar, the module is created by @Tulsadiver, tested by me on Oneplus 7 Pro with firmware version as specified file name.
ESSENTIAL PREREQUISITE: BEFORE INSTALLING THE MOD, IT IS NECESSARY TO INSTALL, IF NOT PRESENT, THE "OVERLAY MOUNT FIX" MODULE BY @Zackptg5 DOWNLOADABLE FROM MAGISK MANAGER, WITHOUT THIS THE CLOCK MODULE WILL NOT WORK!
It is a magisk module and I want to repeat that it can only be used on Oneplus 7 Pro.
The module can only be used with the firmware release indicated in the file name, it will be my commitment to update the thread with the release of future updates.
I'm trying it and it doesn't seem to show any problems but I still recommend making a backup before trying it.
To remove the mod, simply uninstall the module using magisk manager or, if this is not usable, from recovery twrp, using the file manager deleting the module "OP7_VrThemer_OPSystemUI" that you find at the following path:
/data/adb/modules
Update: How to remove the module in case of failure (procedure valid for any magisk module):
Turn off the phone by pressing and holding the power button for a few seconds.
Turn the phone back on.
After the "Bootloader Unlocked" warning appears, press and hold down the "Volume up" and "Volume down" keys at the same time, until the startup animation appears.
The phone will boot correctly but will be operating in "Safe mode".
Now restart your phone normally.
The phone will boot in standard operating mode but with all magisk modules disabled.
Remove the magisk module that caused the problem and enable your other modules and reboot one last time.
The phone operating as if nothing had happened
My biggest, massive, THANKS go to @Tulsadiver, for sending me his xml file with the modifications necessary to obtain the movement of the clock and for passing me Its VRThemer module, without your help I could not have avoided the bootloop ... I can say that the mod is all from @Tulsadiver, the mod is all the result of his work and his expertise, I have only been a tester and shared his fantastic work with you.
Thanks also to @dladz, for giving me his support and advice!
Attention each module you find in this post is specific to the firmware indicated in the file name, with each new firmware it will be my concern to release the new updated module.
Flashing always at your own risk!!!
To be installed only with Magisk Manager, if installed by TWRP it does not work.
Please read all indications before proceeding with the installation, module has been tested and is working on the OxygenOS 10 and OxygenOS 11 based firmware, NOT tested with other firmware and non-OxygenOS based roms.
P.S. To complete the information, I have not had the opportunity to try the same module with other firmware versions, it could work but I have no way of knowing, if you decide to try remember that it should only be used on Oneplus 7 Pro with firmware OxygenOS 10 and OxygenOS 11 and that you do at your own risk. I test the module with the firmware specified in the file name before publishing it, if it is here for you it means that it has not given me any problems.
Flashing always at your own risk!!!

This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible

a63548 said:
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
Click to expand...
Click to collapse
Check your pm

You should post the right clock as well

Just a humble request, can you create a telegram group to support and test your module, it will be faster

a63548 said:
This sounds awesome. Thank you very much. I know it's a lot to ask, but would you be able to make a version that moves the clock to the right? That would be truly amazing if at all possible
Click to expand...
Click to collapse
mholloway said:
You should post the right clock as well
Click to expand...
Click to collapse
work in progress...stay tuned

Added to the first post mod for right clock and updated the module for center clock (if you want to update remove the old release, restart and install the new one).
I await your feedback.
Thanks to @Tulsadiver for his patience in supporting me and for his great availability!

New update of the "center clock" module, fixed clock displayed in the lockscreen defect, I recommend removing those installed up to now and replace with the latter released

Thanks for the mod. I tried the right clock mod but it did not work. Just to be fair, I tried on stable OS 10.3.5 and NOT on beta OS. Mod installed w/o any errors and I can see this mod installed in the Magisk Manager but clock is still on the left side. Rebooted twice, still no go. May be the beta 18 OS is the only OS that support this module. Keep up the good work. Thanks.

Gr8man001 said:
Thanks for the mod. I tried the right clock mod but it did not work. Just to be fair, I tried on stable OS 10.3.5 and NOT on beta OS. Mod installed w/o any errors and I can see this mod installed in the Magisk Manager but clock is still on the left side. Rebooted twice, still no go. May be the beta 18 OS is the only OS that support this module. Keep up the good work. Thanks.
Click to expand...
Click to collapse
Sorry my mistake, try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
The overlay mount fix module is necessary for the mod to work and I forgot to write it, sorry.
I await feedback

Installed right clock on beta 18,not working.
Magisk 20.04
Magisk manager 8.0.2

mholloway said:
Installed right clock on beta 18,not working.
Magisk 20.04
Magisk manager 8.0.2
Click to expand...
Click to collapse
Try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
I await feedback

dianoandr said:
Try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
Click to expand...
Click to collapse
That worked

mholloway said:
That worked
Click to expand...
Click to collapse
My mistake, sorry to you and everyone, I have the "overlay mount fix" module installed by default in my phone and I have not taken into account that it is necessary for the module to work...sorry again

dianoandr said:
Sorry my mistake, try like this:
Remove the right clock module
Restart
Install "Overlay mount fix" module by @Zackptg5 from magisk manager
Restart
Reinstall the clock module
The overlay mount fix module is necessary for the mod to work and I forgot to write it, sorry.
I await feedback
Click to expand...
Click to collapse
I know it worked for someone else but it really messed up my phone. Phone boots fine but screen is dark i.e. no display anymore. I am on OS 10.3.5 and the current Magisk 20.4. I'll use the fast boot zip when I get home to bring the phone back to life. Thanks!

Gr8man001 said:
I know it worked for someone else but it really messed up my phone. Phone boots fine but screen is dark i.e. no display anymore. I am on OS 10.3.5 and the current Magisk 20.4. I'll use the fast boot zip when I get home to bring the phone back to life. Thanks!
Click to expand...
Click to collapse
Go to recovery, with the integrated file manager function, delete the module "OP7_VrThemer_OPSystemUI" that you find at the following path: /data/adb/modules and reboot

dianoandr said:
Go to recovery, with the integrated file manager function, delete the module "OP7_VrThemer_OPSystemUI" that you find at the following path: /data/adb/modules and reboot
Click to expand...
Click to collapse
That did the trick. Thanks for your help. My phone came back to life and working fine
So, is it safe to say that right side clock module only work with OS 18 beta and not the latest stable OS 10.3.5?
Thanks again for your help.

Gr8man001 said:
That did the trick. Thanks for your help. My phone came back to life and working fine
So, is it safe to say that right side clock module only work with OS 18 beta and not the latest stable OS 10.3.5?
Thanks again for your help.
Click to expand...
Click to collapse
Happy it's back to normal, it's a trick to keep in mind for emergency situations.
The change itself is the same for all versions of oxygenos based on android 10, it probably changes something else in the apk and as a consequence the .xml file compiled with the mod, crashes your opsystemui.
I sent you a p.m.

I can confirm that mod works fine on Beta 19 as well? Thanks

Gr8man001 said:
I can confirm that mod works fine on Beta 19 as well Thanks
Click to expand...
Click to collapse
Great news, however as soon as I update my phone, I check that there are no major changes related to the apk and eventually update the modules to avoid instability.

Magisk Module - Center Clock

Just a simple magisk module to make put the clock in the center.
NOTES
-----------------
This will cause issues with android auto!
Confirmed working on OOS 11.0.5.6.KB05AA (Global Rom)
Installation
-------------------
Pre-requisites
Rooted Oneplus 8T
Android 11 Stable
Magisk Manager
Installation instructions
1. Download the module from here:
Center Clock Module
Right Clock Module (Put The Clock on The Right)
2. Copy to your phones storage
3. Open Magisk and select the modules icon
4. Click "Install from storage"
5. Navigate to the downloaded folder and choose the zip inside.
6. Allow it to complete and then reboot.
Enjoy your center clock leave a thanks, let me know if it doesn't work, and I will try to help as much as I can.
Troubleshooting
------------------------------
Magisk module failure.
This works for any magisk module failure.
1. Power off your phone by holding the power button, then turn it back on.
2. As your phone gets to the bootloader warning screen, press and hold volume up and down and continue to hold until the phone shows the boot animation.
3. You'll boot to safe mode, simply reboot once more.
4. On the next boot all your magisk modules will be disabled, remove the problematic module, and re-enable the functional ones.
Original mod made by @Tulsadiver @dianoandr & @dladz for the op. I just pretty much copied and pasted his OP. So thanks for that
tested this module myself, absolutely massive thanks to them for this.

mine

mine as well

And the clock on the right is possible in the future?

maquina80 said:
And the clock on the right is possible in the future?
Click to expand...
Click to collapse
working on it....

Jed!Master said:
working on it....
Click to expand...
Click to collapse

Mention this: Only for OxygenOS to save users from SystemUI error

Tried. Works great! Thanks...
Small suggestions:
Can you reduce the padding from the top. Now the status bar occupies more space. Also can ss be included with hh:mm?

IAMAB said:
Tried. Works great! Thanks...
Small suggestions:
Can you reduce the padding from the top. Now the status bar occupies more space. Also can ss be included with hh:mm?
Click to expand...
Click to collapse
you talking about military hours with seconds on it!? I'll see what can be done as far as the padding goes...

Jed!Master said:
you talking about military hours with seconds on it!? I'll see what can be done as far as the padding goes...
Click to expand...
Click to collapse
Thanks mate.

Working great, thank you!

maquina80 said:
Click to expand...
Click to collapse
Done check it out. Enjoy

Can you please post change log?

IAMAB said:
Can you please post change log?
Click to expand...
Click to collapse
Bruh, someone else is doing the mod I'm just testing it to make sure it works. If there was a change log it would be up there til then flash if you like if not then I guess you won't flash it

Hello
Do you think it works on 11.0.6.8?

T.A.R.D.I.S. said:
Hello
Do you think it works on 11.0.6.8?
Click to expand...
Click to collapse
I'm not sure. But isn't the latest global 11.0.6.7? Correct me if I'm wrong

I tried the module on 11.0.6.7, looked like systemui kept crashing. Was able to disable the module.

-Michael_ said:
I tried the module on 11.0.6.7, looked like systemui kept crashing. Was able to disable the module.
Click to expand...
Click to collapse
And with 11.0.6.9, i've the same issue

-Michael_ said:
I tried the module on 11.0.6.7, looked like systemui kept crashing. Was able to disable the module.
Click to expand...
Click to collapse
Same with 11.0.6.8.KB05BA
Black screen after reboot.

@Jed!Master can you update this for the most recent version of oos?